Linux ARM MSM

• Thread Index

• Re: [PATCH 06/15] dt-bindings: display/msm: sc7180-dpu: Describe SM6125
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/15] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/15] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/9] clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [RESEND v6 6/8] arm64: dts: qcom: sc7280: Modify VA/RX/TX macro clock nodes for audioreach solution
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 01/28] xhci: Add support to allocate several interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: dma: qcom,bam: require one of control methods
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 10/26] bus: mhi: host: use array_size
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 1/3] usb: typec: ucsi: call typec_set_mode on non-altmode partner change
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/15] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 00/15] drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 00/15] drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 06/15] dt-bindings: display/msm: sc7180-dpu: Describe SM6125
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 22/26] ARM: dts: qcom: msm8960: declare SAW2 regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 23/26] ARM: dts: qcom: apq8084: drop 'regulator' property from SAW2 device
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 24/26] ARM: dts: qcom: msm8974: drop 'regulator' property from SAW2 device
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 26/26] ARM: dts: qcom: ipq8064: drop 'regulator' property from SAW2 devices
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 25/26] ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 08/26] soc: qcom: spm: add support for voltage regulator
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 01/28] xhci: Add support to allocate several interrupters
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 08/26] soc: qcom: spm: add support for voltage regulator
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC v1 3/3] PCI: qcom: ep: Add wake up host op to dw_pcie_ep_ops
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v2 06/26] interconnect: icc-clk: add support for scaling using OPP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC v1 1/3] PCI: endpoint: Add wakeup host API to EPC core
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH V5 4/5] clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 04/26] dt-bindings: clock: qcom,krait-cc: Krait core clock controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 09/26] cpufreq: qcom-nvmem: create L2 cache device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] usb: typec: ucsi: call typec_set_mode on non-altmode partner change
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 4/4] input: touchscreen: add SPI support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 4/4] input: touchscreen: add SPI support for Goodix Berlin Touchscreen IC
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/6] thermal/drivers/qcom: Convert to devm_platform_ioremap_resource()
  • From: Yangtao Li <frank.li@xxxxxxxx>
• Re: [RESEND v6 8/8] arm64: dts: qcom: sc7280: Add qcom,adsp-pil-mode property in clock nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 04/19] drm/msm/dpu: drop dpu_mdss_cfg::mdp_count field
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [RESEND v6 6/8] arm64: dts: qcom: sc7280: Modify VA/RX/TX macro clock nodes for audioreach solution
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RESEND v6 5/8] arm64: dts: qcom: sc7280: Add LPASS PIL node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 02/15] phy: qualcomm: add QMP HDMI PHY driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V5 4/5] clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH v2 15/26] ARM: dts: qcom: apq8064: declare SAW2 regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 14/26] ARM: dts: qcom: apq8064: rename SAW nodes to power-manager
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 11/26] cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 10/26] cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 09/26] cpufreq: qcom-nvmem: create L2 cache device
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 08/26] soc: qcom: spm: add support for voltage regulator
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 10/26] bus: mhi: host: use array_size
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/26] interconnect: icc-clk: add support for scaling using OPP
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 04/26] dt-bindings: clock: qcom,krait-cc: Krait core clock controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] thermal/drivers/qcom/temp-alarm: Use dev_err_probe
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [RESEND v6 8/8] arm64: dts: qcom: sc7280: Add qcom,adsp-pil-mode property in clock nodes
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• Re: [RESEND v6 6/8] arm64: dts: qcom: sc7280: Modify VA/RX/TX macro clock nodes for audioreach solution
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• Re: [RESEND v6 5/8] arm64: dts: qcom: sc7280: Add LPASS PIL node
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
  • From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
• Re: [PATCH v8 10/11] arm64: dts: qcom: sm8350: Add Crypto Engine support
  • From: "Linux regression tracking #update (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH 11/15] drm/msm/dsi: Add 14nm phy configuration for SM6125
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFT PATCH] arm64: dts: qcom: sdm850-c630: add missing panel supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] thermal/drivers/qcom/temp-alarm: Use dev_err_probe
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: pm8953: Add thermal zone
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/15] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 00/15] drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 08/15] drm/msm/dpu: Add SM6125 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 3/3] dt-bindings: ufs: qcom: Fix sm8450 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 4/8] qcom: pmic_glink_altmode: add retimer-switch support
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/8] soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: typec: fsa4480: add support for Audio Accessory Mode
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] usb: typec: fsa4480: rework mux & switch setup to handle more states
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/7] Add support for LUT PPG
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] dt-bindings: ufs: qcom: Fix sm8450 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: ufs: qcom: Add reg-names property for ICE
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH 5/5] scsi: dt-bindings: ufs: qcom: Fix warning for sdm845 by adding reg-names
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v4 3/3] dt-bindings: ufs: qcom: Fix sm8450 bindings
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: ufs: qcom: Add reg-names property for ICE
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: ufs: qcom: Add sm6115 binding
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v4 0/3] Fix some issues in QCOM UFS bindings
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• RE: [EXT] [PATCH v3 10/11] media: v4l2: Add DELETE_BUF ioctl
  • From: Ming Qian <ming.qian@xxxxxxx>
• Re: [PATCH 1/3] usb: typec: ucsi: call typec_set_mode on non-altmode partner change
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• RE: [EXT] [PATCH v3 10/11] media: v4l2: Add DELETE_BUF ioctl
  • From: Ming Qian <ming.qian@xxxxxxx>
• Re: [EXT] [PATCH v3 10/11] media: v4l2: Add DELETE_BUF ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [EXT] [PATCH v3 10/11] media: v4l2: Add DELETE_BUF ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] scsi: dt-bindings: ufs: qcom: Fix warning for sdm845 by adding reg-names
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• RE: [EXT] [PATCH v3 10/11] media: v4l2: Add DELETE_BUF ioctl
  • From: Ming Qian <ming.qian@xxxxxxx>
• Re: [PATCH v3 4/4] input: touchscreen: add SPI support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 3/4] input: touchscreen: add I2C support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 2/4] input: touchscreen: add core support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 0/2] Add provision to keep idle state disabled
  • From: Tushar Nimkar <quic_tnimkar@xxxxxxxxxxx>
• Re: [PATCH] cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 5/5] scsi: dt-bindings: ufs: qcom: Fix warning for sdm845 by adding reg-names
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 05/26] dt-bindings: cache: describe L2 cache on Qualcomm Krait platforms
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 26/26] ARM: dts: qcom: ipq8064: drop 'regulator' property from SAW2 devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 25/26] ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 23/26] ARM: dts: qcom: apq8084: drop 'regulator' property from SAW2 device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 24/26] ARM: dts: qcom: msm8974: drop 'regulator' property from SAW2 device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 22/26] ARM: dts: qcom: msm8960: declare SAW2 regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 21/26] ARM: dts: qcom: apq8064-ifc6410: constraint cpufreq regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 17/26] ARM: dts: qcom: apq8064: add simple CPUFreq support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 19/26] ARM: dts: qcom: apq8064: enable passive CPU cooling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 05/26] dt-bindings: cache: describe L2 cache on Qualcomm Krait platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 01/26] dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 20/26] ARM: dts: qcom: apq8064-asus-nexus7-flo: constraint cpufreq regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 14/26] ARM: dts: qcom: apq8064: rename SAW nodes to power-manager
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 10/26] cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 12/26] cpufreq: qcom-nvmem: provide separate configuration data for apq8064
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 04/26] dt-bindings: clock: qcom,krait-cc: Krait core clock controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 02/26] dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 13/26] soc: qcom: Add driver for Qualcomm Krait L2 cache scaling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 08/26] soc: qcom: spm: add support for voltage regulator
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 18/26] ARM: dts: qcom: apq8064: provide voltage scaling tables
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 16/26] ARM: dts: qcom: apq8064: add L2 cache scaling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 07/26] clk: qcom: krait-cc: rewrite driver to use clk_hw instead of clk
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 11/26] cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 06/26] interconnect: icc-clk: add support for scaling using OPP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 15/26] ARM: dts: qcom: apq8064: declare SAW2 regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 03/26] dt-bindings: soc: qcom: qcom,saw2: define optional regulator node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 09/26] cpufreq: qcom-nvmem: create L2 cache device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 00/26] ARM: qcom: apq8064: support CPU frequency scaling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 11/15] drm/msm/dsi: Add 14nm phy configuration for SM6125
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 08/15] drm/msm/dpu: Add SM6125 support
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 06/15] dt-bindings: display/msm: sc7180-dpu: Describe SM6125
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 03/15] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 03/15] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 02/15] dt-bindings: clock: qcom,dispcc-sm6125: Remove unused GCC_DISP_AHB_CLK
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 15/15] arm64: dts: qcom: sm6125-seine: Configure MDSS, DSI and panel
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] input: touchscreen: add SPI support for Goodix Berlin Touchscreen IC
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 14/15] arm64: dts: qcom: sm6125: Add display hardware nodes
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 00/15] drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] input: touchscreen: add I2C support for Goodix Berlin Touchscreen IC
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] input: touchscreen: add core support for Goodix Berlin Touchscreen IC
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 01/15] arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by reg
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH -next] PCI: endpoint: Remove redundant dev_err().
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH v3 01/11] dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 15/15] drm/msm/hdmi: drop old HDMI PHY code
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 14/15] drm/msm/hdmi: switch to generic PHY subsystem
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 13/15] drm/msm/hdmi: pair msm_hdmi_phy_powerup with msm_hdmi_phy_powerdown
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 12/15] drm/msm/hdmi: set infoframes on all pre_enable calls
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 09/15] drm/msm/hdmi: simplify extp clock handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 11/15] drm/msm/hdmi: switch to atomic_pre_enable/post_disable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 10/15] drm/msm/hdmi: correct indentation of HDMI bridge functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 07/15] phy: qualcomm: add MSM8x60 HDMI PHY support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 08/15] drm/msm/hdmi: move the alt_iface clock to the hpd list
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 05/15] phy: qualcomm: add legacy HDMI PHY driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 06/15] phy: qualcomm: add MSM8974 HDMI PHY support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 04/15] phy: qcom-uniphy: add more registers from display PHYs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 02/15] phy: qualcomm: add QMP HDMI PHY driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 03/15] phy: qcom: apq8064-sata: extract UNI PLL register defines
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 01/15] phy: Add HDMI configuration options
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 00/15] drm/msm/hdmi & phy: use generic PHY framework
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: pm8953: Add thermal zone
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH] thermal/drivers/qcom/temp-alarm: Use dev_err_probe
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 10/15] dt-bindings: msm: dsi-phy-14nm: Document SM6125 variant
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH 6/6] drm/msm/dpu: Update dev core dump to dump registers of sub blocks
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 01/11] media: videobuf2: Access vb2_queue bufs array through helper functions
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 10/26] bus: mhi: host: use array_size
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 6/6] drm/msm/dpu: Update dev core dump to dump registers of sub blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFT PATCH] arm64: dts: qcom: sdm850-c630: add missing panel supply
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 00/15] PCI: Convert to platform remove callback returning void
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH 00/15] PCI: Convert to platform remove callback returning void
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH 6/6] drm/msm/dpu: Update dev core dump to dump registers of sub blocks
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH V5 5/5] arm64: dts: qcom: sm8550: Add camera clock controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V5 3/5] clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V5 2/5] clk: qcom: clk-alpha-pll: Add support for lucid ole pll configure
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 13/15] arm64: dts: qcom: sm6125: Add dispcc node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 11/15] drm/msm/dsi: Add 14nm phy configuration for SM6125
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 10/15] dt-bindings: msm: dsi-phy-14nm: Document SM6125 variant
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/5] scsi: dt-bindings: ufs: qcom: Fix warning for sdm845 by adding reg-names
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/3] firmware: qcom_scm: Drop useless compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/3] firmware: qcom_scm: Always return devm_clk_get_optional errors
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/3] firmware: qcom_scm: Always try to consume all three clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/3] Drop useless compatibles from the SCM driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V5 4/5] clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/6] drm/msm/dpu: Update dev core dump to dump registers of sub blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 6/6] drm/msm/dpu: Update dev core dump to dump registers of sub blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/3] pinctrl: qcom: sm8350-lpass-lpi: add SM8350 LPASS TLMM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/6] drm/msm/dpu: Update dev core dump to dump registers of sub blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 15/29] NFSD: dynamically allocate the nfsd-client shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH 3/7] soc: qcom: add QCOM PBS driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/7] soc: qcom: add QCOM PBS driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LUT through NVMEM devices
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 10/15] dt-bindings: msm: dsi-phy-14nm: Document SM6125 variant
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 07/15] dt-bindings: display/msm: Add SM6125 MDSS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 06/15] dt-bindings: display/msm: sc7180-dpu: Describe SM6125
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 05/15] dt-bindings: display/msm: dsi-controller-main: Document SM6125
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 04/15] dt-bindings: clock: qcom,dispcc-sm6125: Allow power-domains property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/15] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 02/15] dt-bindings: clock: qcom,dispcc-sm6125: Remove unused GCC_DISP_AHB_CLK
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/5] scsi: dt-bindings: ufs: qcom: Fix warning for sdm845 by adding reg-names
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 09/15] arm64: dts: qcom: sc7280-crd: add dummy Bluetooth VDDIO supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 10/13] remoteproc: qcom: Add Hexagon based multipd rproc driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v9 04/10] usb: dwc3: core: Skip setting event buffers for host only controllers
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH V2 01/13] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v9 05/10] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v9 08/10] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v9 10/10] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH V2 13/13] arm64: dtsi: qcom: ipq9574: Add nodes to bring up multipd
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: 回复: [PATCH v4] bus: mhi: host: pci_generic: Add support for quectel's new EM160R-GL product
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 0/4] IPQ8074 pcie/wcss fixes
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 1/4] pcie: qcom: Fix the macro PARF_SLV_ADDR_SPACE_SIZE_2_3_3
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH] PCI: qcom: configure the parf halt window size to 1GB
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 15/15] arm64: dts: qcom: sm6125-seine: Configure MDSS, DSI and panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 14/15] arm64: dts: qcom: sm6125: Add display hardware nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 07/15] dt-bindings: display/msm: Add SM6125 MDSS
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 13/15] arm64: dts: qcom: sm6125: Add dispcc node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 12/15] arm64: dts: qcom: sm6125: Switch fixed xo_board clock to RPM XO clock
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 11/15] drm/msm/dsi: Add 14nm phy configuration for SM6125
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 08/15] drm/msm/dpu: Add SM6125 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 03/15] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 01/15] arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by reg
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 00/15] drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/6] drm/msm/dpu: Update dev core dump to dump registers of sub blocks
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v4 3/6] nvmem: sec-qfprom: Add Qualcomm secure QFPROM support.
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 15/15] arm64: dts: qcom: sm6125-seine: Configure MDSS, DSI and panel
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 14/15] arm64: dts: qcom: sm6125: Add display hardware nodes
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 13/15] arm64: dts: qcom: sm6125: Add dispcc node
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 12/15] arm64: dts: qcom: sm6125: Switch fixed xo_board clock to RPM XO clock
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 11/15] drm/msm/dsi: Add 14nm phy configuration for SM6125
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 10/15] dt-bindings: msm: dsi-phy-14nm: Document SM6125 variant
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 09/15] drm/msm/mdss: Add SM6125 support
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 07/15] dt-bindings: display/msm: Add SM6125 MDSS
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 08/15] drm/msm/dpu: Add SM6125 support
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 05/15] dt-bindings: display/msm: dsi-controller-main: Document SM6125
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 06/15] dt-bindings: display/msm: sc7180-dpu: Describe SM6125
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 04/15] dt-bindings: clock: qcom,dispcc-sm6125: Allow power-domains property
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 03/15] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 02/15] dt-bindings: clock: qcom,dispcc-sm6125: Remove unused GCC_DISP_AHB_CLK
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 00/15] drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 01/15] arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by reg
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] firmware: qcom_scm: Always try to consume all three clocks
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 6/6] drm/msm/dpu: Update dev core dump to dump registers of sub blocks
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 10/26] bus: mhi: host: use array_size
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH net-next v5 15/16] sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES)
  • From: David Howells <dhowells@xxxxxxxxxx>
• [PATCH net-next v5 16/16] net: Kill MSG_SENDPAGE_NOTLAST
  • From: David Howells <dhowells@xxxxxxxxxx>
• Re: [PATCH v9 05/10] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [GIT PULL] Qualcomm clock updates for v6.5
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v9 10/10] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v9 09/10] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v9 08/10] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 01/28] xhci: Add support to allocate several interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v9 04/10] usb: dwc3: core: Skip setting event buffers for host only controllers
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Dave Chinner <david@xxxxxxxxxxxxx>
• Re: [PATCH v9 03/10] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 10/26] bus: mhi: host: use array_size
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 15/29] NFSD: dynamically allocate the nfsd-client shrinker
  • From: Chuck Lever <cel@xxxxxxxxxx>
• [PATCH 1/3] firmware: qcom_scm: Always try to consume all three clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/3] firmware: qcom_scm: Drop useless compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/3] Drop useless compatibles from the SCM driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/3] firmware: qcom_scm: Always return devm_clk_get_optional errors
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [Freedreno] [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 10/26] bus: mhi: host: use array_size
  • From: Julia Lawall <julia.lawall@xxxxxxxx>
• Re: [Freedreno] [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 10/26] bus: mhi: host: use array_size
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [PATCH 10/26] bus: mhi: host: use array_size
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• Re: [PATCH 5/5] scsi: dt-bindings: ufs: qcom: Fix warning for sdm845 by adding reg-names
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 00/26] use array_size
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• [PATCH] arm64: dts: qcom: msm8998: Provide XO to RPMCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH net-next v2 02/12] net: stmmac: replace the sph_disable field with a flag
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [PATCH v9 02/10] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v9 01/10] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [Freedreno] [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 17/19] drm/msm/dpu: inline INTF_BLK and INTF_BLK_DSI_TE macros
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: display: msm: sm8550-mdss: document displayport controller subnode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: display: msm: sm8450-mdss: document displayport controller subnode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: display: msm: sm8350-mdss: document displayport controller subnode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/9] PCI: endpoint: Pass EPF device ID to the probe function
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [Freedreno] [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] scsi: dt-bindings: ufs: qcom: Fix sm8450 clocks
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/4] interconnect: qcom: rpmh: sm8550: mask to send as vote
  • From: Mike Tipton <quic_mdtipton@xxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v2 02/12] net: stmmac: replace the sph_disable field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH net-next v2 02/12] net: stmmac: replace the sph_disable field with a flag
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [PATCH v2 0/4] interconnect: qcom: rpmh: sm8550: mask to send as vote
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH 09/15] arm64: dts: qcom: sc7280-crd: add dummy Bluetooth VDDIO supply
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 0/7] drm/msm/dpu: simplify DPU sub-blocks info
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/4] pcie: qcom: Fix the macro PARF_SLV_ADDR_SPACE_SIZE_2_3_3
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 1/4] pcie: qcom: Fix the macro PARF_SLV_ADDR_SPACE_SIZE_2_3_3
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH V5 5/5] arm64: dts: qcom: sm8550: Add camera clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V5 1/5] dt-bindings: clock: qcom: Add SM8550 camera clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V5 3/5] clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V5 4/5] clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V5 2/5] clk: qcom: clk-alpha-pll: Add support for lucid ole pll configure
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V5 0/5] Add camera clock controller support for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH V4 4/4] arm64: dts: qcom: sm8550: Add camera clock controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V4 4/4] arm64: dts: qcom: sm8550: Add camera clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH 1/5] scsi: dt-bindings: ufs: qcom: Fix ICE phandle
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: clock: qcom,mmcc: Add GPLL0_DIV for MSM8998
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/9] dt-bindings: clk: qcom,gcc-msm8998: Add missing GPU/MMSS GPLL0 legs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 2/6] dt-bindings: cache: qcom,llcc: Add LLCC compatible for QDU1000/QRU1000
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V4 0/4] Add camera clock controller support for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH V4 2/4] clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 3/6] clk: qcom: clk-alpha-pll: Remove explicit CAL_L configuration for EVO PLL
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH] cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v3 01/11] media: videobuf2: Access vb2_queue bufs array through helper functions
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 6/6] soc: qcom: llcc: Add QDU1000 and QRU1000 LLCC support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/6] soc: qcom: Add LLCC support for multi channel DDR
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 3/6] nvmem: sec-qfprom: Add Qualcomm secure QFPROM support.
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 1/2] drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH 9/9] arm64: dts: qcom: msm8998: Use the correct GPLL0_DIV leg for MMCC
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v4 6/6] soc: qcom: llcc: Add QDU1000 and QRU1000 LLCC support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 8/9] arm64: dts: qcom: msm8998: Use the correct GPLL0 leg for GPUCC
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v4 5/6] soc: qcom: Add LLCC support for multi channel DDR
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 7/9] clk: qcom: gcc-msm8998: Don't poke at some BIMC GPU clocks
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [PATCH v4 1/6] dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v4 6/6] soc: qcom: llcc: Add QDU1000 and QRU1000 LLCC support
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v4 5/6] soc: qcom: Add LLCC support for multi channel DDR
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v4 3/6] nvmem: sec-qfprom: Add Qualcomm secure QFPROM support.
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v4 4/6] soc: qcom: llcc: Refactor llcc driver to support multiple configuration
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v4 2/6] dt-bindings: cache: qcom,llcc: Add LLCC compatible for QDU1000/QRU1000
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v4 0/6] soc: qcom: llcc: Add support for QDU1000/QRU1000
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gcc-qdu1000: Update GCC clocks and add support for GDSCs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] misc: fastrpc: Fix remote heap allocation request
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH 5/7] drm/msm/dpu: deduplicate some (most) of SSPP sub-blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 7/7] drm/msm/dpu: merge dpu_csc_blk and dpu_dsc_blk into dpu_simple_blk
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 6/7] drm/msm/dpu: drop DPU_HW_SUBBLK_INFO macro
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 4/7] drm/msm/dpu: drop the `smart_dma_priority' field from struct dpu_sspp_sub_blks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/7] drm/msm/dpu: Drop unused num argument from relevant macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/7] drm/msm/dpu: drop the field `name' from DPU_HW_SUBBLK_INFO
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/7] drm/msm/dpu: drop the `id' field from DPU_HW_SUBBLK_INFO
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/7] drm/msm/dpu: simplify DPU sub-blocks info
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/4] interconnect: qcom: rpmh: sm8550: mask to send as vote
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2] misc: fastrpc: Pass proper scm arguments for static process init
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Pass proper scm arguments for static process init
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Fix remote heap allocation request
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] interconnect: qcom: sa8775p: add enable_mask for bcm nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/4] interconnect: qcom: sm8450: add enable_mask for bcm nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/4] interconnect: qcom: Add support for mask-based BCMs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 05/29] drm/panfrost: dynamically allocate the drm-panfrost shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH 29/29] mm: shrinker: move shrinker-related code into a separate file
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH 29/29] mm: shrinker: move shrinker-related code into a separate file
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH net-next v2 00/12] net: stmmac: replace boolean fields in plat_stmmacenet_data with flags
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH V4 3/4] dt-bindings: qcom-qce: add SoC compatible string for ipq9574
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/4] bluetooth: qca: add support for WCN7850
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [External] Re: [PATCH 01/29] mm: shrinker: add shrinker::private_data field
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH v2 3/4] interconnect: qcom: sm8550: add enable_mask for bcm nodes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 4/4] interconnect: qcom: sa8775p: add enable_mask for bcm nodes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 2/4] interconnect: qcom: sm8450: add enable_mask for bcm nodes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 1/4] interconnect: qcom: Add support for mask-based BCMs
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH v2 0/4] interconnect: qcom: rpmh: sm8550: mask to send as vote
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 02/29] mm: vmscan: introduce some helpers for dynamically allocating shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] scsi: dt-bindings: ufs: qcom: Fix warning for sdm845 by adding reg-names
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] scsi: dt-bindings: ufs: qcom: Add compatible for sm6115 and sm6125
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/5] scsi: dt-bindings: ufs: qcom: Add compatible for sm6115 and sm6125
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: display: msm: sm8450-mdss: document displayport controller subnode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings: display: msm: sm8550-mdss: document displayport controller subnode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: display: msm: sm8350-mdss: document displayport controller subnode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 0/3] dt-bindings: display: msm: document the SM8[345]50 displayport MDSS subnode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 5/5] scsi: dt-bindings: ufs: qcom: Fix warning for sdm845 by adding reg-names
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/5] scsi: dt-bindings: ufs: qcom: Add compatible for sc8180x
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/5] scsi: dt-bindings: ufs: qcom: Fix sm8450 clocks
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V4 3/4] dt-bindings: qcom-qce: add SoC compatible string for ipq9574
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• [PATCH net-next v4 15/15] net: Kill MSG_SENDPAGE_NOTLAST
  • From: David Howells <dhowells@xxxxxxxxxx>
• [PATCH net-next v4 14/15] sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES)
  • From: David Howells <dhowells@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/5] scsi: dt-bindings: ufs: qcom: Fix warning for sdm845 by adding reg-names
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH 4/5] scsi: dt-bindings: ufs: qcom: Fix sm8450 clocks
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH 3/5] scsi: dt-bindings: ufs: qcom: Add compatible for sc8180x
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH 1/5] scsi: dt-bindings: ufs: qcom: Fix ICE phandle
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH 2/5] scsi: dt-bindings: ufs: qcom: Add compatible for sm6115 and sm6125
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH 0/5] scsi: dt-bindings: ufs: qcom: Some fixes to clear all dtbs_check warnings
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] dts: Reserve memory region for NSS and TZ
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH 4/4] dts: Reserve memory region for NSS and TZ
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH 1/4] pcie: qcom: Fix the macro PARF_SLV_ADDR_SPACE_SIZE_2_3_3
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 4/4] dts: Reserve memory region for NSS and TZ
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] pcie: qcom: Fix the macro PARF_SLV_ADDR_SPACE_SIZE_2_3_3
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/4] dts: Reserve memory region for NSS and TZ
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/4] IPQ8074 pcie/wcss fixes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] PCI: qcom: configure the parf halt window size to 1GB
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gcc-qdu1000: Update GCC clocks and add support for GDSCs
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH net-next v2 12/12] net: stmmac: replace the en_tx_lpi_clockgating field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH net-next v2 11/12] net: stmmac: replace the rx_clk_runs_in_lpi field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH net-next v2 10/12] net: stmmac: replace the int_snapshot_en field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH net-next v2 09/12] net: stmmac: replace the ext_snapshot_en field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH net-next v2 05/12] net: stmmac: replace the tso_en field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH net-next v2 08/12] net: stmmac: replace the multi_msi_en field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH net-next v2 06/12] net: stmmac: replace the serdes_up_after_phy_linkup field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gcc-qdu1000: Update GCC clocks and add support for GDSCs
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH net-next v2 07/12] net: stmmac: replace the vlan_fail_q_en field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH net-next v2 02/12] net: stmmac: replace the sph_disable field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH net-next v2 03/12] net: stmmac: replace the use_phy_wol field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH net-next v2 04/12] net: stmmac: replace the has_sun8i field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH net-next v2 01/12] net: stmmac: replace the has_integrated_pcs field with a flag
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH net-next v2 00/12] net: stmmac: replace boolean fields in plat_stmmacenet_data with flags
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• Re: [PATCH 0/2] Update GCC clocks for QDU1000 and QRU1000 SoCs
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: qcom: Document msm8939,a7
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• Re: [PATCH 05/29] drm/panfrost: dynamically allocate the drm-panfrost shrinker
  • From: Steven Price <steven.price@xxxxxxx>
• [PATCH 2/4] dt-bindings: clock: qcom: Add reset for WCSSAON
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH 4/4] dts: Reserve memory region for NSS and TZ
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH 3/4] clk: qcom: Add WCSSAON reset
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH 1/4] pcie: qcom: Fix the macro PARF_SLV_ADDR_SPACE_SIZE_2_3_3
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH 0/4] IPQ8074 pcie/wcss fixes
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH 3/4] clk: qcom: Add WCSSAON reset
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: clock: qcom: Add reset for WCSSAON
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH 1/4] pcie: qcom: Fix the macro PARF_SLV_ADDR_SPACE_SIZE_2_3_3
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH 0/4] IPQ8074 pcie/wcss fixes
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH V8 3/3] rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support
  • From: Arnaud POULIQUEN <arnaud.pouliquen@xxxxxxxxxxx>
• Re: [PATCH v2 00/10] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH V2] arm64: dts: qcom: ipq5332: Add common RDP dtsi file
  • From: Sridharan S N <quic_sridsn@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] spi: dt-bindings: qcom,spi-geni-qcom: Add SPI device mode support for GENI based QuPv3
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V8 1/3] rpmsg: core: Add signal API support
  • From: Arnaud POULIQUEN <arnaud.pouliquen@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 03/11] media: videobuf2: Remove VB2_MAX_FRAME limit on buffer storage
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: display: msm: sm8350-mdss: document displayport controller subnode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: display: msm: sm8350-mdss: document displayport controller subnode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [Freedreno] [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6] Add support to print sub block registers in dpu hw catalog
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/msm/dpu: fix DSC 1.2 enc subblock length
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 03/11] media: videobuf2: Remove VB2_MAX_FRAME limit on buffer storage
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Dave Chinner <david@xxxxxxxxxxxxx>
• Re: [PATCH RFC v1 0/3] PCI: EPC: Add support to wake up host from D3 states
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH RFC v1 3/3] PCI: qcom: ep: Add wake up host op to dw_pcie_ep_ops
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 02/29] mm: vmscan: introduce some helpers for dynamically allocating shrinker
  • From: Dave Chinner <david@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH RFC v1 1/3] PCI: endpoint: Add wakeup host API to EPC core
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v4 3/3] PCI: qcom-ep: Add ICC bandwidth voting support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 29/29] mm: shrinker: move shrinker-related code into a separate file
  • From: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
• [PATCH] PCI: qcom: configure the parf halt window size to 1GB
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH 2/2] drm/msm/dpu: fix DSC 1.2 enc subblock length
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: ufs: qcom: Add ICE phandle
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 21/28] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 10/11] media: v4l2: Add DELETE_BUF ioctl
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 20/28] ASoC: dt-bindings: Add Q6USB backend bindings
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 2/6] drm/msm/dpu: Drop unused num argument from relevant macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 6/6] drm/msm/dpu: Update dev core dump to dump registers of sub blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/6] drm/msm: Update dev core dump to not print backwards
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/6] drm/msm/dpu: Drop unused num argument from relevant macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v13 10/24] gunyah: vm_mgr: Add/remove user memory regions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH 4/6] drm/msm/dpu: Remove redundant suffix in name of sub blocks
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• [PATCH 3/6] drm/msm/dpu: Define names for unnamed sblks
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• [PATCH 6/6] drm/msm/dpu: Update dev core dump to dump registers of sub blocks
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• [PATCH 2/6] drm/msm/dpu: Drop unused num argument from relevant macros
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• [PATCH 5/6] drm/msm/disp: Remove redundant prefix in name of sub blocks
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• [PATCH 0/6] Add support to print sub block registers in dpu hw catalog
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• [PATCH 1/6] drm/msm: Update dev core dump to not print backwards
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 10/11] media: v4l2: Add DELETE_BUF ioctl
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] phy: qcom-snps-femto-v2: add system sleep PM ops
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3 1/3] phy: qcom-snps-femto-v2: properly enable ref clock
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] SC8280XP clock runtime pm
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 1/4] dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: firmware: qcom,scm: Allow interconnect on SC8280XP
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/4] bluetooth: qca: add support for WCN7850
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v3 2/3] phy: qcom-snps-femto-v2: add system sleep PM ops
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH v3 1/3] phy: qcom-snps-femto-v2: properly enable ref clock
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH v3 0/3] Fixes for qcom-snps-femto-v2 PHY driver
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH v3 3/3] phy: qcom-snps-femto-v2: use qcom_snps_hsphy_do_suspend/resume error code
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• Re: [PATCH v3 2/3] spi: dt-bindings: qcom,spi-geni-qcom: Add SPI device mode support for GENI based QuPv3
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on sa8775p-ride
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on sa8775p-ride
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/adreno: Add missing MODULE_FIRMWARE macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drm/msm/dsi: Enable runtime PM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 1/2] drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/2] drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Alan Huang <mmpgouride@xxxxxxxxx>
• [PATCH v5 1/2] drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v5 0/2] retrieve DSI DSC through priv-dsi[0]
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v5 2/2] drm/msm/dpu: remove struct drm_dsc_config from struct msm_display_info
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [RESEND v7 2/3] scsi: ufs: ufs-qcom: Switch to the new ICE API
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sc8280xp: Add missing SCM interconnect
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: firmware: qcom,scm: Allow interconnect on SC8280XP
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/2] Hook up 8280 SCM icc
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 08/11] media: verisilicon: postproc: Fix down scale test
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH 7/7] arm64: dts: qcom: msm8916-samsung-fortuna: Add NFC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/9] clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 6/7] arm64: dts: qcom: msm8916-samsung-fortuna: Add accelerometer/magnetometer
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• Re: [PATCH 3/8] arm64: dts: qcom: msm8939-samsung-a7: Add touch key
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 6/9] clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 3/9] clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/9] clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTs
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 4/9] clk: qcom: mmcc-msm8998: Properly consume GPLL0 inputs
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 3/9] clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: clock: qcom,mmcc: Add GPLL0_DIV for MSM8998
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 29/29] mm: shrinker: move shrinker-related code into a separate file
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• Re: [PATCH v5 1/6] dt-bindings: iommu: qcom,iommu: Add qcom,ctx-asid property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 01/29] mm: shrinker: add shrinker::private_data field
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• Re: [PATCH 2/9] dt-bindings: clock: qcom,mmcc: Add GPLL0_DIV for MSM8998
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/9] dt-bindings: clk: qcom,gcc-msm8998: Add missing GPU/MMSS GPLL0 legs
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: qcom: Document msm8939,a7
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 3/4] input: touchscreen: add I2C support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 2/4] input: touchscreen: add core support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 4/4] input: touchscreen: add SPI support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: input: document Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 0/4] input: touchscreen: add initial support for Goodix Berlin touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 03/11] media: videobuf2: Remove VB2_MAX_FRAME limit on buffer storage
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH v3 03/11] media: videobuf2: Remove VB2_MAX_FRAME limit on buffer storage
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v3 3/3] spi: spi-geni-qcom: Add SPI Device mode support for GENI based QuPv3
  • From: Praveen Talari <quic_ptalari@xxxxxxxxxxx>
• [PATCH v3 2/3] spi: dt-bindings: qcom,spi-geni-qcom: Add SPI device mode support for GENI based QuPv3
  • From: Praveen Talari <quic_ptalari@xxxxxxxxxxx>
• [PATCH v3 1/3] soc: qcom: geni-se: Add SPI Device mode support for GENI based QuPv3
  • From: Praveen Talari <quic_ptalari@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 0/3] spi-geni-qcom: Add SPI device mode support for GENI based QuPv3
  • From: Praveen Talari <quic_ptalari@xxxxxxxxxxx>
• Re: [PATCH v3 03/11] media: videobuf2: Remove VB2_MAX_FRAME limit on buffer storage
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/3] remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 03/11] media: videobuf2: Remove VB2_MAX_FRAME limit on buffer storage
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 11/11] media: v4l2: Add mem2mem helpers for DELETE_BUF ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 04/11] media: videobuf2: Stop define VB2_MAX_FRAME as global
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 09/11] media: verisilicon: vp9: Allow to change resolution while streaming
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 07/11] media: verisilicon: vp9: Use destination buffer height to compute chroma offset
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 10/11] media: v4l2: Add DELETE_BUF ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 08/11] media: verisilicon: postproc: Fix down scale test
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 06/11] media: verisilicon: Store chroma and motion vectors offset
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 05/11] media: verisilicon: Refactor postprocessor to store more buffers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 01/11] media: videobuf2: Access vb2_queue bufs array through helper functions
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 02/11] media: videobuf2: Use Xarray instead of static buffers array
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 00/11] Add DELETE_BUF ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [Freedreno] [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: "Leonard Lausen" <leonard@xxxxxxxxx>
• Re: [PATCH 0/2] Add provision to keep idle state disabled
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v10 5/6] iommu/dma: Allow a single FQ in addition to per-CPU FQs
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [RESEND PATCH v2 1/5] arm64: dts: qcom: sa8775p: add the SGMII PHY node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v2 2/5] arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v2 5/5] arm64: dts: qcom: sa8775p-ride: enable ethernet0
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v2 4/5] arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v2 3/5] arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on sa8775p-ride
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 6/9] clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 4/9] clk: qcom: mmcc-msm8998: Properly consume GPLL0 inputs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 9/9] arm64: dts: qcom: msm8998: Use the correct GPLL0_DIV leg for MMCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 8/9] arm64: dts: qcom: msm8998: Use the correct GPLL0 leg for GPUCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/9] clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 5/9] clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 6/9] clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 7/9] clk: qcom: gcc-msm8998: Don't poke at some BIMC GPU clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/9] dt-bindings: clock: qcom,mmcc: Add GPLL0_DIV for MSM8998
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/9] dt-bindings: clk: qcom,gcc-msm8998: Add missing GPU/MMSS GPLL0 legs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/9] MSM8998 clk cleanups and fixups
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/5] accel/qaic: tighten bounds checking in encode_message()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH 1/5] accel/qaic: tighten bounds checking in encode_message()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/5] accel/qaic: tighten bounds checking in encode_message()
  • From: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@xxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sdm845-mtp: add chassis-type property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: sdm630: Add support for modem remoteproc
  • From: Alexey Minnekhanov <alexeymin@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sdm845-mtp: add chassis-type property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sdm845-mtp: add chassis-type property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/5] accel/qaic: Improve bounds checking in encode/decode
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v5 3/6] iommu/qcom: Disable and reset context bank before programming
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 6/6] iommu/qcom: Add support for QSMMUv2 and QSMMU-500 secured contexts
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 4/6] iommu/qcom: Index contexts by asid number to allow asid 0
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 2/6] iommu/qcom: Use the asid read from device-tree if specified
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: ufs: qcom: Add ICE phandle
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 5/6] dt-bindings: iommu: qcom,iommu: Add QSMMUv2 and MSM8976 compatibles
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 6/6] iommu/qcom: Add support for QSMMUv2 and QSMMU-500 secured contexts
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 4/6] iommu/qcom: Index contexts by asid number to allow asid 0
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 3/6] iommu/qcom: Disable and reset context bank before programming
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 2/6] iommu/qcom: Use the asid read from device-tree if specified
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 1/6] dt-bindings: iommu: qcom,iommu: Add qcom,ctx-asid property
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 0/6] Add support for Qualcomm's legacy IOMMU v2
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sdm845-mtp: add chassis-type property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 00/29] use refcount+RCU method to implement lockless slab shrink
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] arm64: dts: qcom: msm89xx-mtp: add chassis-type property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/5] arm64: dts: qcom: sm8[1234]50-hdk: add chassis-type property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/5] arm64: dts: qcom: sm8[45]50-qrd: add chassis-type property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/5] arm64: dts: qcom: sm8[1235]50-mtp: add chassis-type property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 29/29] mm: shrinker: move shrinker-related code into a separate file
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 2/5] arm64: dts: qcom: sm8[45]50-qrd: add chassis-type property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 4/5] arm64: dts: qcom: msm89xx-mtp: add chassis-type property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 3/5] arm64: dts: qcom: sm8[1234]50-hdk: add chassis-type property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 25/29] mm: vmscan: make memcg slab shrink lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 0/5] arm64: dts: qcom: add chassis-type to reference platforms
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 27/29] mm: vmscan: hold write lock to reparent shrinker nr_deferred
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: sdm845-mtp: add chassis-type property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 26/29] mm: shrinker: make count and scan in shrinker debugfs lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 1/5] arm64: dts: qcom: sm8[1235]50-mtp: add chassis-type property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 28/29] mm: shrinkers: convert shrinker_rwsem to mutex
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8939-sony-xperia-kanuti-tulip: Add missing 'chassis-type'
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 23/29] mm: shrinker: add refcount and completion_wait fields
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 21/29] fs: super: dynamically allocate the s_shrink
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 22/29] drm/ttm: introduce pool_shrink_rwsem
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 20/29] zsmalloc: dynamically allocate the mm-zspool shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 19/29] xfs: dynamically allocate the xfs-qm shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 18/29] xfs: dynamically allocate the xfs-inodegc shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 17/29] xfs: dynamically allocate the xfs-buf shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 14/29] jbd2,ext4: dynamically allocate the jbd2-journal shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 16/29] NFSD: dynamically allocate the nfsd-reply shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 15/29] NFSD: dynamically allocate the nfsd-client shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 13/29] ext4: dynamically allocate the ext4-es shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 12/29] mbcache: dynamically allocate the mbcache shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 11/29] virtio_balloon: dynamically allocate the virtio-balloon shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 10/29] vmw_balloon: dynamically allocate the vmw-balloon shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 07/29] dm zoned: dynamically allocate the dm-zoned-meta shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 08/29] md/raid5: dynamically allocate the md-raid5 shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 09/29] bcache: dynamically allocate the md-bcache shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 06/29] dm: dynamically allocate the dm-bufio shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 05/29] drm/panfrost: dynamically allocate the drm-panfrost shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 04/29] drm/msm: dynamically allocate the drm-msm_gem shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 02/29] mm: vmscan: introduce some helpers for dynamically allocating shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 01/29] mm: shrinker: add shrinker::private_data field
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 03/29] drm/i915: dynamically allocate the i915_gem_mm shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 00/29] use refcount+RCU method to implement lockless slab shrink
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: ipq9574: Use assigned-clock-rates for QUP I2C core clks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 06/29] dm: dynamically allocate the dm-bufio shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 03/29] drm/i915: dynamically allocate the i915_gem_mm shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 05/29] drm/panfrost: dynamically allocate the drm-panfrost shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 00/29] use refcount+RCU method to implement lockless slab shrink
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 01/29] mm: shrinker: add shrinker::private_data field
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 04/29] drm/msm: dynamically allocate the drm-msm_gem shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 02/29] mm: vmscan: introduce some helpers for dynamically allocating shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 07/29] dm zoned: dynamically allocate the dm-zoned-meta shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 14/29] jbd2,ext4: dynamically allocate the jbd2-journal shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 13/29] ext4: dynamically allocate the ext4-es shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 12/29] mbcache: dynamically allocate the mbcache shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 11/29] virtio_balloon: dynamically allocate the virtio-balloon shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 10/29] vmw_balloon: dynamically allocate the vmw-balloon shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 09/29] bcache: dynamically allocate the md-bcache shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 08/29] md/raid5: dynamically allocate the md-raid5 shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 00/29] use refcount+RCU method to implement lockless slab shrink
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 01/29] mm: shrinker: add shrinker::private_data field
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 02/29] mm: vmscan: introduce some helpers for dynamically allocating shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• Re: [External] [PATCH 00/29] use refcount+RCU method to implement lockless slab shrink
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>