On 28/08/2023 21:18, Sricharan Ramabadhran wrote:
> IPQ5018 has tsens V1.0 IP with 4 sensors.
> There is no RPM, so tsens has to manually enabled.
> Adding the tsens and nvmem node.
>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 9f13d2dcdfd5..277b3cfc7f72 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -93,6 +93,29 @@ soc: soc@0 {
> #size-cells = <1>;
> ranges = <0 0 0 0xffffffff>;
>
> + qfprom_nvmem: qfprom_nvmem@a0000 {
Nope. Come on, where do you see such node naming. Please do not send
code from downstream, but work on upstream sources. Open other most
recent DTS, take a look how it is done and try to do something similar.
> + #address-cells = <1>;
> + #size-cells = <1>;
compatible is always the first property. Then reg.
> + compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
> + reg = <0xa0000 0x1000>;
> +
> + tsens_calib: calib@248 {
> + reg = <0x248 0x10>;
> + };
> + };
> +
Best regards,
Krzysztof
