Hello Kalle, We'd like to ask for inclusion of the board file for the Qualcomm Robotics RB1 platform. It is an IOT platform manufactured by Thundercomm, using the Snapdragon QRB2210 SoC. Following the questions from the ath10k wiki page: * description for what hardware this is - It is an QRB2210-based platform (QRB2210) - It uses wcn3990 chip as a WiFi and BT radio - For the reference: ath10k_snoc c800000.wifi: qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000 ath10k_snoc c800000.wifi: qmi fw_version 0x337302d3 fw_build_timestamp 2023-01-06 01:50 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.3.7.c2-00723-QCAHLSWMTPLZ-1 ath10k_snoc c800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000 ath10k_snoc c800000.wifi: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 ath10k_snoc c800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790 ath10k_snoc c800000.wifi: htt-ver 3.114 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1 * origin of the board file - It comes from the firmware package provided by Thundercomm for redistribution. * ids to be used with the board file bus=snoc,qmi-board-id=ff,qmi-chip-id=120,variant=Thundercomm_RB1 Note, the device comes with the board_id not changed from 0xff. Following the example of existing boards we are adding the calibration variant. * md5sum of each new board file to add $ md5sum * 5003239259d8cb68097a941dde86dcc7 bus=snoc,qmi-board-id=ff,qmi-chip-id=120,variant=Thundercomm_RB1.bin $ sha256sum * 0eeffb43040b216b0f3210b8db69e4558844dd9df52caf9c25f56a79401f442c bus=snoc,qmi-board-id=ff,qmi-chip-id=120,variant=Thundercomm_RB1.bin -- With best wishes Dmitry
Attachment:
bus=snoc,qmi-board-id=ff,qmi-chip-id=120,variant=Thundercomm_RB1.bin
Description: Binary data
