Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 41 +++++++++++---------------
1 file changed, 18 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 4b0039ccd0da..89d723e4ad61 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -228,31 +228,26 @@ usb_hsphy: phy@ff4000 {
usb_qmpphy: phy@ff6000 {
compatible = "qcom,sdx55-qmp-usb3-uni-phy";
- reg = <0x00ff6000 0x1c0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00ff6000 0x1000>;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
-
- resets = <&gcc GCC_USB3PHY_PHY_BCR>,
- <&gcc GCC_USB3_PHY_BCR>;
- reset-names = "phy", "common";
-
- usb_ssphy: phy@ff6200 {
- reg = <0x00ff6200 0x170>,
- <0x00ff6400 0x200>,
- <0x00ff6800 0x800>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ status = "disabled";
};
mc_virt: interconnect@1100000 {
@@ -603,7 +598,7 @@ usb_dwc3: usb@a600000 {
iommus = <&apps_smmu 0x1a0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_hsphy>, <&usb_ssphy>;
+ phys = <&usb_hsphy>, <&usb_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
--
2.39.2
