Linux ARM MSM

• Thread Index

• Re: [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 03/11] media: videobuf2: Remove VB2_MAX_FRAME limit on buffer storage
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: display: msm: sm8350-mdss: document displayport controller subnode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: display: msm: sm8350-mdss: document displayport controller subnode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [Freedreno] [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6] Add support to print sub block registers in dpu hw catalog
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/msm/dpu: fix DSC 1.2 enc subblock length
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 03/11] media: videobuf2: Remove VB2_MAX_FRAME limit on buffer storage
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Dave Chinner <david@xxxxxxxxxxxxx>
• Re: [PATCH RFC v1 0/3] PCI: EPC: Add support to wake up host from D3 states
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH RFC v1 3/3] PCI: qcom: ep: Add wake up host op to dw_pcie_ep_ops
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 02/29] mm: vmscan: introduce some helpers for dynamically allocating shrinker
  • From: Dave Chinner <david@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH RFC v1 1/3] PCI: endpoint: Add wakeup host API to EPC core
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v4 3/3] PCI: qcom-ep: Add ICC bandwidth voting support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 29/29] mm: shrinker: move shrinker-related code into a separate file
  • From: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
• [PATCH] PCI: qcom: configure the parf halt window size to 1GB
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH 2/2] drm/msm/dpu: fix DSC 1.2 enc subblock length
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/2] drm/msm/dpu: fix DSC 1.2 block lengths
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: ufs: qcom: Add ICE phandle
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 21/28] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 10/11] media: v4l2: Add DELETE_BUF ioctl
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 20/28] ASoC: dt-bindings: Add Q6USB backend bindings
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 2/6] drm/msm/dpu: Drop unused num argument from relevant macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 6/6] drm/msm/dpu: Update dev core dump to dump registers of sub blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/6] drm/msm: Update dev core dump to not print backwards
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/6] drm/msm/dpu: Drop unused num argument from relevant macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v13 10/24] gunyah: vm_mgr: Add/remove user memory regions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH 4/6] drm/msm/dpu: Remove redundant suffix in name of sub blocks
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• [PATCH 3/6] drm/msm/dpu: Define names for unnamed sblks
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• [PATCH 6/6] drm/msm/dpu: Update dev core dump to dump registers of sub blocks
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• [PATCH 2/6] drm/msm/dpu: Drop unused num argument from relevant macros
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• [PATCH 5/6] drm/msm/disp: Remove redundant prefix in name of sub blocks
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• [PATCH 0/6] Add support to print sub block registers in dpu hw catalog
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• [PATCH 1/6] drm/msm: Update dev core dump to not print backwards
  • From: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 10/11] media: v4l2: Add DELETE_BUF ioctl
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] phy: qcom-snps-femto-v2: add system sleep PM ops
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3 1/3] phy: qcom-snps-femto-v2: properly enable ref clock
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] SC8280XP clock runtime pm
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 1/4] dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: firmware: qcom,scm: Allow interconnect on SC8280XP
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/4] bluetooth: qca: add support for WCN7850
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v3 2/3] phy: qcom-snps-femto-v2: add system sleep PM ops
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH v3 1/3] phy: qcom-snps-femto-v2: properly enable ref clock
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH v3 0/3] Fixes for qcom-snps-femto-v2 PHY driver
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH v3 3/3] phy: qcom-snps-femto-v2: use qcom_snps_hsphy_do_suspend/resume error code
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• Re: [PATCH v3 2/3] spi: dt-bindings: qcom,spi-geni-qcom: Add SPI device mode support for GENI based QuPv3
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on sa8775p-ride
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on sa8775p-ride
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/adreno: Add missing MODULE_FIRMWARE macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drm/msm/dsi: Enable runtime PM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 1/2] drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/2] drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Alan Huang <mmpgouride@xxxxxxxxx>
• [PATCH v5 1/2] drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v5 0/2] retrieve DSI DSC through priv-dsi[0]
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v5 2/2] drm/msm/dpu: remove struct drm_dsc_config from struct msm_display_info
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [RESEND v7 2/3] scsi: ufs: ufs-qcom: Switch to the new ICE API
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sc8280xp: Add missing SCM interconnect
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: firmware: qcom,scm: Allow interconnect on SC8280XP
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/2] Hook up 8280 SCM icc
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 08/11] media: verisilicon: postproc: Fix down scale test
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH 7/7] arm64: dts: qcom: msm8916-samsung-fortuna: Add NFC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/9] clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 6/7] arm64: dts: qcom: msm8916-samsung-fortuna: Add accelerometer/magnetometer
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• Re: [PATCH 3/8] arm64: dts: qcom: msm8939-samsung-a7: Add touch key
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 6/9] clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 3/9] clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/9] clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTs
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 4/9] clk: qcom: mmcc-msm8998: Properly consume GPLL0 inputs
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 3/9] clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: clock: qcom,mmcc: Add GPLL0_DIV for MSM8998
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 29/29] mm: shrinker: move shrinker-related code into a separate file
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• Re: [PATCH v5 1/6] dt-bindings: iommu: qcom,iommu: Add qcom,ctx-asid property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 01/29] mm: shrinker: add shrinker::private_data field
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• Re: [PATCH 2/9] dt-bindings: clock: qcom,mmcc: Add GPLL0_DIV for MSM8998
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/9] dt-bindings: clk: qcom,gcc-msm8998: Add missing GPU/MMSS GPLL0 legs
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: qcom: Document msm8939,a7
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 3/4] input: touchscreen: add I2C support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 2/4] input: touchscreen: add core support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 4/4] input: touchscreen: add SPI support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: input: document Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 0/4] input: touchscreen: add initial support for Goodix Berlin touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 03/11] media: videobuf2: Remove VB2_MAX_FRAME limit on buffer storage
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH v3 03/11] media: videobuf2: Remove VB2_MAX_FRAME limit on buffer storage
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v3 3/3] spi: spi-geni-qcom: Add SPI Device mode support for GENI based QuPv3
  • From: Praveen Talari <quic_ptalari@xxxxxxxxxxx>
• [PATCH v3 2/3] spi: dt-bindings: qcom,spi-geni-qcom: Add SPI device mode support for GENI based QuPv3
  • From: Praveen Talari <quic_ptalari@xxxxxxxxxxx>
• [PATCH v3 1/3] soc: qcom: geni-se: Add SPI Device mode support for GENI based QuPv3
  • From: Praveen Talari <quic_ptalari@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 0/3] spi-geni-qcom: Add SPI device mode support for GENI based QuPv3
  • From: Praveen Talari <quic_ptalari@xxxxxxxxxxx>
• Re: [PATCH v3 03/11] media: videobuf2: Remove VB2_MAX_FRAME limit on buffer storage
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/3] remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 03/11] media: videobuf2: Remove VB2_MAX_FRAME limit on buffer storage
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 11/11] media: v4l2: Add mem2mem helpers for DELETE_BUF ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 04/11] media: videobuf2: Stop define VB2_MAX_FRAME as global
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 09/11] media: verisilicon: vp9: Allow to change resolution while streaming
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 07/11] media: verisilicon: vp9: Use destination buffer height to compute chroma offset
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 10/11] media: v4l2: Add DELETE_BUF ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 08/11] media: verisilicon: postproc: Fix down scale test
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 06/11] media: verisilicon: Store chroma and motion vectors offset
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 05/11] media: verisilicon: Refactor postprocessor to store more buffers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 01/11] media: videobuf2: Access vb2_queue bufs array through helper functions
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 02/11] media: videobuf2: Use Xarray instead of static buffers array
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v3 00/11] Add DELETE_BUF ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [Freedreno] [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: "Leonard Lausen" <leonard@xxxxxxxxx>
• Re: [PATCH 0/2] Add provision to keep idle state disabled
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v10 5/6] iommu/dma: Allow a single FQ in addition to per-CPU FQs
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [RESEND PATCH v2 1/5] arm64: dts: qcom: sa8775p: add the SGMII PHY node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v2 2/5] arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v2 5/5] arm64: dts: qcom: sa8775p-ride: enable ethernet0
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v2 4/5] arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v2 3/5] arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on sa8775p-ride
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 6/9] clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 4/9] clk: qcom: mmcc-msm8998: Properly consume GPLL0 inputs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 9/9] arm64: dts: qcom: msm8998: Use the correct GPLL0_DIV leg for MMCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 8/9] arm64: dts: qcom: msm8998: Use the correct GPLL0 leg for GPUCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/9] clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 5/9] clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 6/9] clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 7/9] clk: qcom: gcc-msm8998: Don't poke at some BIMC GPU clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/9] dt-bindings: clock: qcom,mmcc: Add GPLL0_DIV for MSM8998
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/9] dt-bindings: clk: qcom,gcc-msm8998: Add missing GPU/MMSS GPLL0 legs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/9] MSM8998 clk cleanups and fixups
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/5] accel/qaic: tighten bounds checking in encode_message()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH 1/5] accel/qaic: tighten bounds checking in encode_message()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/5] accel/qaic: tighten bounds checking in encode_message()
  • From: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@xxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sdm845-mtp: add chassis-type property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: sdm630: Add support for modem remoteproc
  • From: Alexey Minnekhanov <alexeymin@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sdm845-mtp: add chassis-type property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sdm845-mtp: add chassis-type property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/5] accel/qaic: Improve bounds checking in encode/decode
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v5 3/6] iommu/qcom: Disable and reset context bank before programming
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 6/6] iommu/qcom: Add support for QSMMUv2 and QSMMU-500 secured contexts
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 4/6] iommu/qcom: Index contexts by asid number to allow asid 0
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 2/6] iommu/qcom: Use the asid read from device-tree if specified
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: ufs: qcom: Add ICE phandle
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 5/6] dt-bindings: iommu: qcom,iommu: Add QSMMUv2 and MSM8976 compatibles
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 6/6] iommu/qcom: Add support for QSMMUv2 and QSMMU-500 secured contexts
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 4/6] iommu/qcom: Index contexts by asid number to allow asid 0
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 3/6] iommu/qcom: Disable and reset context bank before programming
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 2/6] iommu/qcom: Use the asid read from device-tree if specified
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 1/6] dt-bindings: iommu: qcom,iommu: Add qcom,ctx-asid property
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 0/6] Add support for Qualcomm's legacy IOMMU v2
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sdm845-mtp: add chassis-type property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 00/29] use refcount+RCU method to implement lockless slab shrink
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] arm64: dts: qcom: msm89xx-mtp: add chassis-type property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/5] arm64: dts: qcom: sm8[1234]50-hdk: add chassis-type property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/5] arm64: dts: qcom: sm8[45]50-qrd: add chassis-type property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/5] arm64: dts: qcom: sm8[1235]50-mtp: add chassis-type property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 24/29] mm: vmscan: make global slab shrink lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 29/29] mm: shrinker: move shrinker-related code into a separate file
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 2/5] arm64: dts: qcom: sm8[45]50-qrd: add chassis-type property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 4/5] arm64: dts: qcom: msm89xx-mtp: add chassis-type property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 3/5] arm64: dts: qcom: sm8[1234]50-hdk: add chassis-type property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 25/29] mm: vmscan: make memcg slab shrink lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 0/5] arm64: dts: qcom: add chassis-type to reference platforms
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 27/29] mm: vmscan: hold write lock to reparent shrinker nr_deferred
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: sdm845-mtp: add chassis-type property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 26/29] mm: shrinker: make count and scan in shrinker debugfs lockless
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 1/5] arm64: dts: qcom: sm8[1235]50-mtp: add chassis-type property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 28/29] mm: shrinkers: convert shrinker_rwsem to mutex
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8939-sony-xperia-kanuti-tulip: Add missing 'chassis-type'
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 23/29] mm: shrinker: add refcount and completion_wait fields
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 21/29] fs: super: dynamically allocate the s_shrink
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 22/29] drm/ttm: introduce pool_shrink_rwsem
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 20/29] zsmalloc: dynamically allocate the mm-zspool shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 19/29] xfs: dynamically allocate the xfs-qm shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 18/29] xfs: dynamically allocate the xfs-inodegc shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 17/29] xfs: dynamically allocate the xfs-buf shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 14/29] jbd2,ext4: dynamically allocate the jbd2-journal shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 16/29] NFSD: dynamically allocate the nfsd-reply shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 15/29] NFSD: dynamically allocate the nfsd-client shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 13/29] ext4: dynamically allocate the ext4-es shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 12/29] mbcache: dynamically allocate the mbcache shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 11/29] virtio_balloon: dynamically allocate the virtio-balloon shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 10/29] vmw_balloon: dynamically allocate the vmw-balloon shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 07/29] dm zoned: dynamically allocate the dm-zoned-meta shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 08/29] md/raid5: dynamically allocate the md-raid5 shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 09/29] bcache: dynamically allocate the md-bcache shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 06/29] dm: dynamically allocate the dm-bufio shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 05/29] drm/panfrost: dynamically allocate the drm-panfrost shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 04/29] drm/msm: dynamically allocate the drm-msm_gem shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 02/29] mm: vmscan: introduce some helpers for dynamically allocating shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 01/29] mm: shrinker: add shrinker::private_data field
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 03/29] drm/i915: dynamically allocate the i915_gem_mm shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• [PATCH 00/29] use refcount+RCU method to implement lockless slab shrink
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: ipq9574: Use assigned-clock-rates for QUP I2C core clks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 06/29] dm: dynamically allocate the dm-bufio shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 03/29] drm/i915: dynamically allocate the i915_gem_mm shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 05/29] drm/panfrost: dynamically allocate the drm-panfrost shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 00/29] use refcount+RCU method to implement lockless slab shrink
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 01/29] mm: shrinker: add shrinker::private_data field
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 04/29] drm/msm: dynamically allocate the drm-msm_gem shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 02/29] mm: vmscan: introduce some helpers for dynamically allocating shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 07/29] dm zoned: dynamically allocate the dm-zoned-meta shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 14/29] jbd2,ext4: dynamically allocate the jbd2-journal shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 13/29] ext4: dynamically allocate the ext4-es shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 12/29] mbcache: dynamically allocate the mbcache shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 11/29] virtio_balloon: dynamically allocate the virtio-balloon shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 10/29] vmw_balloon: dynamically allocate the vmw-balloon shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 09/29] bcache: dynamically allocate the md-bcache shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 08/29] md/raid5: dynamically allocate the md-raid5 shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 00/29] use refcount+RCU method to implement lockless slab shrink
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 01/29] mm: shrinker: add shrinker::private_data field
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• [PATCH 02/29] mm: vmscan: introduce some helpers for dynamically allocating shrinker
  • From: Qi Zheng <qi.zheng@xxxxxxxxx>
• Re: [External] [PATCH 00/29] use refcount+RCU method to implement lockless slab shrink
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: ufs: qcom: Add ICE phandle
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: ipq9574: Use assigned-clock-rates for QUP I2C core clks
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH v2 6/6] arm64: defconfig: Enable M31 USB phy driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 5/6] arm64: dts: qcom: ipq5332: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 4/6] arm64: dts: qcom: ipq5332: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 3/6] phy: qcom-m31: Introduce qcom,m31 USB phy driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: usb: dwc3: Add IPQ5332 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v1 0/6] Enable IPQ5332 USB2
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: sdm630: Add support for modem remoteproc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: ufs: qcom: Add ICE phandle
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 0/5] accel/qaic: Improve bounds checking in encode/decode
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: msm8939-sony-xperia-kanuti-tulip: Add missing 'chassis-type'
  • From: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
• [PATCH 8/8] arm64: dts: qcom: msm8939-samsung-a7: Add touchscreen
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 7/8] arm64: dts: qcom: msm8939-samsung-a7: Add vibrator
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 6/8] arm64: dts: qcom: msm8939-samsung-a7: Add NFC
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 5/8] arm64: dts: qcom: msm8939-samsung-a7: Add rt5033 battery
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 4/8] arm64: dts: qcom: msm8939-samsung-a7: Add accelerometer/magnetometer
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 3/8] arm64: dts: qcom: msm8939-samsung-a7: Add touch key
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 2/8] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 1/8] dt-bindings: qcom: Document msm8939,a7
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 0/8] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: display: msm: sm8550-mdss: document displayport controller subnode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: display: msm: sm8450-mdss: document displayport controller subnode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: display: msm: sm8350-mdss: document displayport controller subnode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: clock: qcom,gcc-sc8280xp: Add missing GDSCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: net: bluetooth: qualcomm: document WCN7850 chipset
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 5/6] dt-bindings: iommu: qcom,iommu: Add QSMMUv2 and MSM8976 compatibles
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: iommu: qcom,iommu: Add qcom,ctx-num property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 12/13] dt-bindings: arm: Add support for DSB MSR register
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 02/13] dt-bindings: arm: Add support for DSB element size
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: ufs: qcom: Add ICE phandle
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH 0/7] arm64: dts: qcom: msm8916-samsung-fortuna: Add initial device trees
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 6/7] arm64: dts: qcom: msm8916-samsung-fortuna: Add accelerometer/magnetometer
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 2/7] arm64: dts: qcom: msm8916-samsung-fortuna: Add initial device trees
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 4/7] arm64: dts: qcom: msm8916-samsung-fortuna: Add rt5033 battery
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 5/7] arm64: dts: qcom: msm8916-samsung-fortuna: Add touchscreen
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 1/7] dt-bindings: qcom: Document new msm8916-samsung devices
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 3/7] ARM: dts: qcom-msm8916-samsung-fortuna: Include dts from arm64
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 7/7] arm64: dts: qcom: msm8916-samsung-fortuna: Add NFC
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v9 2/2] dt-bindings: msm: dsi-controller-main: Document clocks on a per compatible basis
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 2/2] dt-bindings: msm: dsi-controller-main: Document clocks on a per compatible basis
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] phy: qcom-snps-femto-v2: add system sleep PM ops
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v2 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LUT through NVMEM devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 0/2] retrieve DSI DSC through priv-dsi[0]
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] arm64: dts: qcom: sm6115p-j606f: Hook up display
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 7/7] leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 6/7] leds: rgb: leds-qcom-lpg: Support two-nvmem PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 4/7] leds: rgb: leds-qcom-lpg: Add support for LUT pattern through single SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LUT through NVMEM devices
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 0/7] Add support for LUT PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660
  • From: Alexey Minnekhanov <alexeymin@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible
  • From: Alexey Minnekhanov <alexeymin@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: sdm630: Add support for modem remoteproc
  • From: Alexey Minnekhanov <alexeymin@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 00/10] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v4 2/2] drm/msm/dpu: remove struct drm_dsc_config from struct msm_display_info
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v4 1/2] drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v4 0/2] retrieve DSI DSC through priv-dsi[0]
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH V8 2/3] rpmsg: glink: Add support to handle signals command
  • From: Sarannya S <quic_sarannya@xxxxxxxxxxx>
• [PATCH V8 3/3] rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support
  • From: Sarannya S <quic_sarannya@xxxxxxxxxxx>
• [PATCH V8 1/3] rpmsg: core: Add signal API support
  • From: Sarannya S <quic_sarannya@xxxxxxxxxxx>
• [PATCH V8 0/3] *** rpmsg signaling/flowcontrol patches ***
  • From: Sarannya S <quic_sarannya@xxxxxxxxxxx>
• [RESEND PATCH 7/7] phy: qcom: qmp-combo: extract common function to setup clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [RESEND PATCH 5/7] phy: qcom: qmp-combo: drop similar functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [RESEND PATCH 6/7] phy: qcom: qmp-combo: drop qmp_v6_dp_aux_init()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [RESEND PATCH 2/7] phy: qcom: qmp-combo: reuse register layouts for more registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [RESEND PATCH 3/7] phy: qcom: qmp-combo: reuse register layouts for even more registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [RESEND PATCH 4/7] phy: qcom: qmp-combo: reuse register layouts for some more registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [RESEND PATCH 1/7] phy: qcom: qmp-combo: correct bias0_en programming
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [RESEND PATCH 0/7] phy: qcom: qmp-combo: rework register access
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 7/7] phy: qcom: qmp-combo: extract common function to setup clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 6/7] phy: qcom: qmp-combo: drop qmp_v6_dp_aux_init()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/7] phy: qcom: qmp-combo: drop similar functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 4/7] phy: qcom: qmp-combo: reuse register layouts for some more registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/7] phy: qcom: qmp-combo: reuse register layouts for even more registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/7] phy: qcom: qmp-combo: reuse register layouts for more registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/7] phy: qcom: qmp-combo: correct bias0_en programming
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/7] phy: qcom: qmp-combo: rework register access
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH v5 2/4] driver core: Add dev_is_drv_state_synced()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [RFC PATCH v5 4/4] PM: domains: Add and set generic sync state callback
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [RFC PATCH v5 3/4] PM: domains: Ignore power off request for enabled unused domains
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [RFC PATCH v5 2/4] driver core: Add dev_is_drv_state_synced()
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [RFC PATCH v5 0/4] PM: domain: Support skiping disabling unused domains until sync state
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [RFC PATCH v5 1/4] driver core: Add dev_set_drv_sync_state()
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/2] ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PULL] Add Audio topology firmware for Qualcomm SC8280XP X13s platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 08/10] clk: qcom: gcc-mdm9615: drop the cxo clock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm6115p-j606f: Hook up display
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH V2 01/13] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: qrb4210-rb2: Enable GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sm6115p-j606f: Enable GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/4] arm64: dts: qcom: sm6115: Add GPU nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: qcom: sm6115p-j606f: Hook up display
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/4] A610 enablement, J606F display
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] soundwire: qcom: fix storing port config out-of-bounds
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PULL] Add Audio topology firmware for Qualcomm SC8280XP X13s platform
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8450: add missing power-domains property to usb qmpphy node
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8450: add missing power-domains property to usb qmpphy node
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• 回复: [PATCH v4] bus: mhi: host: pci_generic: Add support for quectel's new EM160R-GL product
  • From: Duke Xin(辛安文) <duke.xin@xxxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v9 06/10] usb: dwc3: qcom: Add support to read IRQ's related to multiport
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v9 06/10] usb: dwc3: qcom: Add support to read IRQ's related to multiport
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8450: add missing power-domains property to usb qmpphy node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8450: add missing power-domains property to usb qmpphy node
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: display: msm: sm8450-mdss: document displayport controller subnode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 3/3] dt-bindings: display: msm: sm8550-mdss: document displayport controller subnode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: display: msm: sm8350-mdss: document displayport controller subnode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 0/3] dt-bindings: display: msm: document the SM8[345]50 displayport MDSS subnode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH V23 2/3] misc: dcc: Add driver support for Data Capture and Compare unit(DCC)
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH 01/18] dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/18] dt-bindings: soc: qcom: qcom,saw2: define optional regulator node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v15 5/5] arm64: dts: qcom: ipq9574: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 5/5] accel/qaic: Fix a leak in map_user_pages()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 4/5] accel/qaic: move and expand integer overflow checks for map_user_pages()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 3/5] accel/qaic: Add consistent integer overflow checks
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 2/5] accel/qaic: tighten bounds checking in decode_message()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 1/5] accel/qaic: tighten bounds checking in encode_message()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 0/5] accel/qaic: Improve bounds checking in encode/decode
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sc8280xp-crd: Fix naming of regulators
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sc8280xp-crd: Correct vreg_misc_3p3 GPIO
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sc8280xp-crd: Fix naming of regulators
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v1] misc: fastrpc: Fix DSP capabilities request
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: idle-states: Add idle-state-disabled property
  • From: Tushar Nimkar <quic_tnimkar@xxxxxxxxxxx>
• Re: [PATCH 0/2] Add provision to keep idle state disabled
  • From: Tushar Nimkar <quic_tnimkar@xxxxxxxxxxx>
• Re: [RESEND v6 7/8] arm64: dts: qcom: sc7280: Modify LPASS_MCC reg region size in the lpass_tlmm node
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v9 10/10] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v9 09/10] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v9 07/10] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v9 08/10] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v9 06/10] usb: dwc3: qcom: Add support to read IRQ's related to multiport
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v9 05/10] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v9 04/10] usb: dwc3: core: Skip setting event buffers for host only controllers
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v9 02/10] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v9 03/10] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v9 00/10] Add multiport support for DWC3 controllers
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v9 01/10] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [RESEND PATCH net-next v2 00/14] net: stmmac: dwmac-qcom-ethqos: add support for EMAC4
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH] soc: qcom: rpmh-rsc: Include state in trace event
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [Freedreno] [PATCH 1/3] drm/msm/dpu: Add DPU_INTF_DATABUS_WIDEN feature flag for DPU >= 5.0
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: cmd-db: Drop NUL bytes from debugfs output
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] soc: qcom: rpmh-rsc: Include state in trace event
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH] arm64: defconfig: Enable Qualcomm SC8280XP GPUCC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [Freedreno] [PATCH 1/3] drm/msm/dpu: Add DPU_INTF_DATABUS_WIDEN feature flag for DPU >= 5.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH 1/3] drm/msm/dpu: Add DPU_INTF_DATABUS_WIDEN feature flag for DPU >= 5.0
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH] soc: qcom: cmd-db: Drop NUL bytes from debugfs output
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v4 16/20] arm64: enable Permission Indirection Extension (PIE)
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v4 16/20] arm64: enable Permission Indirection Extension (PIE)
  • From: Oliver Upton <oliver.upton@xxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sc8280xp-crd: Fix naming of regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sc8280xp-crd: Correct vreg_misc_3p3 GPIO
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sc8280xp-crd: Fix naming of regulators
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sc8280xp-crd: Correct vreg_misc_3p3 GPIO
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v4 16/20] arm64: enable Permission Indirection Extension (PIE)
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH v4 16/20] arm64: enable Permission Indirection Extension (PIE)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] arm64: defconfig: Enable Qualcomm SC8280XP GPUCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: defconfig: Enable Qualcomm SC8280XP GPUCC
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: (subset) [PATCH 1/2] clk: qcom: mmcc-msm8974: use clk_rcg2_shared_ops for mdp_clk_src clock
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v4 16/20] arm64: enable Permission Indirection Extension (PIE)
  • From: Joey Gouly <joey.gouly@xxxxxxx>
• Re: [PATCH v2 2/4] input: touchscreen: add core support for Goodix Berlin Touchscreen IC
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v4 16/20] arm64: enable Permission Indirection Extension (PIE)
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: qrb4210-rb2: Enable GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] arm64: dts: qcom: sm6115p-j606f: Hook up display
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: icc-bwmon: Don't ignore return values of regmap functions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/3] clk: qcom: gcc-sc8280xp: Add missing GDSC flags
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/3] clk: qcom: gcc-sc8280xp: Add missing GDSCs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: clock: qcom,gcc-sc8280xp: Add missing GDSCs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/3] Fix up 8280 GCC GDSCs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/4] input: touchscreen: add core support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: icc-bwmon: Don't ignore return values of regmap functions
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: icc-bwmon: Don't ignore return values of regmap functions
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: pinctrl: qcom,sm8350-lpass-lpi: add SM8350 LPASS TLMM
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: pinctrl: qcom,sm8350-lpass-lpi: add SM8350 LPASS TLMM
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/2] ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: extcon-usb-gpio: convert to DT schema format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: input: document Goodix Berlin Touchscreen IC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/4] arm64: dts: qcom: sm6115: Add GPU nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/4] arm64: dts: qcom: sm6115p-j606f: Hook up display
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: qcom: sm6115p-j606f: Enable GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: qrb4210-rb2: Enable GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/4] bluetooth: qca: add support for WCN7850
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/2] of: reserved_mem: Use stable allocation order
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] of: reserved_mem: Try to keep range allocations contiguous
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/4] bluetooth: qca: add support for WCN7850
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: net: bluetooth: qualcomm: document WCN7850 chipset
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sm8550-qrd: add bluetooth support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: sm8550: add UART14 nodes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 0/4] bluetooth: qca: enable WCN7850 support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH net-next v3 17/18] sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES)
  • From: David Howells <dhowells@xxxxxxxxxx>
• [PATCH net-next v3 18/18] net: Kill MSG_SENDPAGE_NOTLAST
  • From: David Howells <dhowells@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] accel/qaic: Call DRM helper function to destroy prime GEM
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v6 09/13] Add nodes for dsb edge control
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm6115: Set up CPU cooling maps
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: sm6115p-j606f: Enable GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/4] arm64: dts: qcom: sm6115: Add GPU nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/4] arm64: dts: qcom: sm6115p-j606f: Hook up display
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: qrb4210-rb2: Enable GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/4] A610 enablement, J606F display
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH net-next v2 17/17] net: Kill MSG_SENDPAGE_NOTLAST
  • From: Willem de Bruijn <willemdebruijn.kernel@xxxxxxxxx>
• Re: [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/2] DSIPHY RPM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/2] drm/msm/dsi: Enable runtime PM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 6/8] drm/msm/dpu: use dpu_perf_cfg in DPU core_perf code
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/2] drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/2] drm/msm/dsi: Enable runtime PM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/2] DSIPHY RPM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/8] drm/msm/dpu: use dpu_perf_cfg in DPU core_perf code
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 5/6] drm/msm/a6xx: Improve GMU force shutdown sequence
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 6/6] drm/msm/a6xx: Fix up GMU region reservations
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 4/6] drm/msm/a6xx: Ensure clean GMU state in a6xx_gmu_fw_start
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 1/6] drm/msm/a6xx: Add some missing header definitions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 2/6] drm/msm/a6xx: Use descriptive bitfield names for CP_PROTECT_CNTL
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 3/6] drm/msm/a6xx: Skip empty protection ranges entries
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 0/6] Adreno QoL changes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: sm8250-edo: Rectify gpio-keys
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/4] SM8250 Edo pins, keys & pmic
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 8/8] drm/msm/dpu: remove unused fields from struct dpu_core_perf
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 7/8] drm/msm/dpu: drop dpu_core_perf_destroy()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/8] drm/msm/dpu: use dpu_perf_cfg in DPU core_perf code
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/8] drm/msm/dpu: drop dpu_core_perf_params::max_per_pipe_ib
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/8] drm/msm/dpu: rework indentation in dpu_core_perf
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/8] drm/msm/dpu: drop dpu_core_perf_params::max_per_pipe_ib
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/8] drm/msm/dpu: drop performance tuning modes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/8] drm/msm/dpu: drop enum dpu_core_perf_data_bus_id
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 0/9] PCI: qcom: Do not advertise hotplug capability
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH v4 1/5] mtd: rawnand: qcom: Implement exec_op()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 0/6] Add support for Qualcomm's legacy IOMMU v2
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v4 6/6] iommu/qcom: Add support for QSMMUv2 and QSMMU-500 secured contexts
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v4 4/6] iommu/qcom: Index contexts by asid number to allow asid 0
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v4 5/6] dt-bindings: iommu: qcom,iommu: Add QSMMUv2 and MSM8976 compatibles
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v4 3/6] iommu/qcom: Disable and reset context bank before programming
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v4 2/6] iommu/qcom: Use the asid read from device-tree if specified
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v4 1/6] dt-bindings: iommu: qcom,iommu: Add qcom,ctx-num property
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v4 0/6] Add support for Qualcomm's legacy IOMMU v2
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] iommu/qcom: Use the asid read from device-tree if specified
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v4 11/11] thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
  • From: Yangtao Li <frank.li@xxxxxxxx>
• [PATCH v4 10/11] thermal/drivers/mediatek/lvts_thermal: remove redundant msg
  • From: Yangtao Li <frank.li@xxxxxxxx>
• [PATCH v4 09/11] thermal/drivers/qcom: remove redundant msg
  • From: Yangtao Li <frank.li@xxxxxxxx>
• [PATCH v4 08/11] thermal/drivers/ti-soc: remove redundant msg in ti_thermal_expose_sensor()
  • From: Yangtao Li <frank.li@xxxxxxxx>
• [PATCH v4 07/11] thermal/drivers/qoriq: remove redundant msg in qoriq_tmu_register_tmu_zone()
  • From: Yangtao Li <frank.li@xxxxxxxx>
• [PATCH v4 06/11] thermal/drivers/tegra: remove redundant msg in tegra_tsensor_register_channel()
  • From: Yangtao Li <frank.li@xxxxxxxx>
• [PATCH v4 05/11] drivers/thermal/k3: remove redundant msg in k3_bandgap_probe()
  • From: Yangtao Li <frank.li@xxxxxxxx>
• [PATCH v4 04/11] thermal/drivers/imx: remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()
  • From: Yangtao Li <frank.li@xxxxxxxx>
• [PATCH v4 03/11] thermal/drivers/amlogic: remove redundant msg in amlogic_thermal_probe()
  • From: Yangtao Li <frank.li@xxxxxxxx>
• [PATCH v4 02/11] thermal/drivers/sun8i: remove redundant msg in sun8i_ths_register()
  • From: Yangtao Li <frank.li@xxxxxxxx>
• [PATCH v4 01/11] thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs()
  • From: Yangtao Li <frank.li@xxxxxxxx>
• Re: [PATCH v6 09/13] Add nodes for dsb edge control
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 09/13] Add nodes for dsb edge control
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v6 09/13] Add nodes for dsb edge control
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 09/13] Add nodes for dsb edge control
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v6 13/13] coresight-tpdm: Add nodes for dsb msr support
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 12/13] dt-bindings: arm: Add support for DSB MSR register
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 08/13] coresight-tpdm: Add node to set dsb programming mode
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 09/13] Add nodes for dsb edge control
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 11/13] coresight-tpdm: Add nodes for timestamp request
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 06/13] coresight-tpdm: Add reset node to TPDM node
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 04/13] coresight-tpda: Add DSB dataset support
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 00/13] Add support to configure TPDM DSB subunit
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 01/13] coresight-tpdm: Remove the unnecessary lock
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 03/13] coresight-tpdm: Introduce TPDM subtype to TPDM driver
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 07/13] coresight-tpdm: Add nodes to set trigger timestamp and type
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 02/13] dt-bindings: arm: Add support for DSB element size
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 05/13] coresight-tpdm: Initialize DSB subunit configuration
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 10/13] coresight-tpdm: Add nodes to configure pattern match output
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v3 2/6] drm/msm/a6xx: Use descriptive bitfield names for CP_PROTECT_CNTL
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH V2] firmware: qcom_scm: use the SCM_CONVENTION based on ARM / ARM64
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH v2] drm/msm/adreno: Add missing MODULE_FIRMWARE macros
  • From: Juerg Haefliger <juerg.haefliger@xxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Update MODULE_FIRMWARE macros
  • From: Juerg Haefliger <juerg.haefliger@xxxxxxxxxxxxx>
• [PATCH 8/8] drm/msm/dpu: remove unused fields from struct dpu_core_perf
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 7/8] drm/msm/dpu: drop dpu_core_perf_destroy()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 6/8] drm/msm/dpu: use dpu_perf_cfg in DPU core_perf code
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/8] drm/msm/dpu: drop the dpu_core_perf_crtc_update()'s stop_req param
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 4/8] drm/msm/dpu: rework indentation in dpu_core_perf
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/8] drm/msm/dpu: drop dpu_core_perf_params::max_per_pipe_ib
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/8] drm/msm/dpu: drop enum dpu_core_perf_data_bus_id
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/8] drm/msm/dpu: drop performance tuning modes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/8] drm/msm/dpu: cleanup dpu_core_perf module
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 0/6] Add support for Qualcomm's legacy IOMMU v2
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH] drm/msm: Fix typo in comment
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/2] drm/msm/dpu: remove struct drm_dsc_config from struct msm_display_info
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 1/2] drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 17/19] drm/msm/dpu: inline INTF_BLK and INTF_BLK_DSI_TE macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 19/19] drm/msm/dpu: drop empty features mask INTF_SDM845_MASK
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 18/19] drm/msm/dpu: drop empty features mask MERGE_3D_SM8150_MASK
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 15/19] drm/msm/dpu: inline various PP_BLK_* macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 16/19] drm/msm/dpu: inline WB_BLK macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 12/19] drm/msm/dpu: inline LM_BLK macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 14/19] drm/msm/dpu: inline MERGE_3D_BLK macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 13/19] drm/msm/dpu: inline DSC_BLK and DSC_BLK_1_2 macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 11/19] drm/msm/dpu: inline DSPP_BLK macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 10/19] drm/msm/dpu: inline SSPP_BLK macros
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 09/19] drm/msm/dpu: correct indentation for CTL definitions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 06/19] drm/msm/dpu: expand .clk_ctrls definitions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 08/19] drm/msm/dpu: drop zero features from dpu_ctl_cfg data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 07/19] drm/msm/dpu: drop zero features from dpu_mdp_cfg data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 04/19] drm/msm/dpu: drop dpu_mdss_cfg::mdp_count field
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 05/19] drm/msm/dpu: drop enum dpu_mdp and MDP_TOP value
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 03/19] drm/msm/dpu: simplify peer LM handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 02/19] drm/msm/dpu: always use MSM_DP/DSI_CONTROLLER_n
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 01/19] drm/msm: enumerate DSI interfaces
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 00/19] drm/msm/dpu: another catalog rework
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: msm8916-samsung-serranove: Add RT5033 PMIC with charger
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: qcom: msm8960: drop spi-max-frequency from controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: qcom: ipq8064: drop spi-max-frequency from controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: qcom: sdx55: use generic node names for USB
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: qcom: ipq4019: use generic node names for USB
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 4/4] ARM: dts: qcom: msm8960: drop spi-max-frequency from controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/4] ARM: dts: qcom: ipq8064: drop spi-max-frequency from controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/4] ARM: dts: qcom: sdx55: use generic node names for USB
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/4] ARM: dts: qcom: ipq4019: use generic node names for USB
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 6/6] drm/msm/a6xx: Fix up GMU region reservations
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 5/6] drm/msm/a6xx: Improve GMU force shutdown sequence
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 4/6] drm/msm/a6xx: Ensure clean GMU state in a6xx_gmu_fw_start
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 3/6] drm/msm/a6xx: Skip empty protection ranges entries
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 2/6] drm/msm/a6xx: Use descriptive bitfield names for CP_PROTECT_CNTL
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 1/6] drm/msm/a6xx: Add some missing header definitions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 0/6] Adreno QoL changes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH RFT RFC 3/3] arm64: dts: qcom: sc8280xp: Fix up idle state periods
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH RFT RFC 2/3] arm64: dts: qcom: sc8280xp: Add missing CPU idle states
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH RFT RFC 1/3] arm64: dts: qcom: sc8280xp: Add lower cluster idle states
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH RFT RFC 0/3] Fix up SC8280XP idle states
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/2] clk: qcom: gcc-sc8280xp: Add runtime PM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/2] clk: qcom: gpucc-sc8280xp: Add runtime PM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/2] SC8280XP clock runtime pm
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 11/12] thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v3 11/12] thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v4 6/9] PCI: qcom: Do not advertise hotplug capability for IP v2.3.2
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 7/9] PCI: qcom: Use post init sequence of IP v2.3.2 for v2.4.0
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 8/9] PCI: qcom: Do not advertise hotplug capability for IP v1.0.0
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 9/9] PCI: qcom: Do not advertise hotplug capability for IP v2.1.0
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 5/9] PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 4/9] PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 2/9] PCI: qcom: Use DWC helpers for modifying the read-only DBI registers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 3/9] PCI: qcom: Disable write access to read only registers for IP v2.9.0
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 1/9] PCI: qcom: Disable write access to read only registers for IP v2.3.3
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 0/9] PCI: qcom: Do not advertise hotplug capability
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sm8350: add APR and LPASS TLMM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sm8350: add APR and LPASS TLMM
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: patches dropped from drm-misc-next [Was: Re: [PATCH 00/53] drm: Convert to platform remove callback returning] void
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFT PATCH] arm64: dts: qcom: sdm850-c630: add missing panel supply
  • From: Steev Klimaszewski <steev@xxxxxxxx>
• Re: patches dropped from drm-misc-next [Was: Re: [PATCH 00/53] drm: Convert to platform remove callback returning] void
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: patches dropped from drm-misc-next [Was: Re: [PATCH 00/53] drm: Convert to platform remove callback returning] void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: patches dropped from drm-misc-next [Was: Re: [PATCH 00/53] drm: Convert to platform remove callback returning] void
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sm8350: add APR and LPASS TLMM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sm8350-hdk: include PMK8350
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sm8350-hdk: add uSD card
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sm8350-hdk: include PMK8350
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: apq8039-t2: remove superfluous "input-enable"
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sc8180x-flex-5g: remove superfluous "input-enable"
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 15/15] arm64: dts: qcom: sm6115-pro1x: fix incorrect gpio-key,wakeup
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFT PATCH] arm64: dts: qcom: sdm850-c630: add missing panel supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 10/15] arm64: dts: qcom: sc8180x: use generic ADC channel node names
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 11/15] arm64: dts: qcom: sc8180x: align thermal node name with bindings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 09/15] arm64: dts: qcom: sc7280-crd: add dummy Bluetooth VDDIO supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 12/15] arm64: dts: qcom: sc8180x-flex-5g: correct panel ports
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 13/15] arm64: dts: qcom: sc8180x-primus: correct panel ports
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 14/15] arm64: dts: qcom: sc8180x-flex-5g: align gpio-keys node name with bindings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 08/15] arm64: dts: qcom: sc7180-aspire1: use generic ADC channel node names
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 07/15] arm64: dts: qcom: msm8996-xiaomi: use generic node names
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 06/15] arm64: dts: qcom: msm8996-xiaomi: drop label from I2C
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 05/15] arm64: dts: qcom: msm8939: drop incorrect smp2p Hexagon properties
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 04/15] arm64: dts: qcom: apq8096-db820c: drop label from I2C
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 03/15] arm64: dts: qcom: apq8016-sbc: drop label from I2C and SPI
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v8 10/18] drm/msm/a6xx: Introduce GMU wrapper support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: defconfig: enable Qualcomm MSM8996 Global Clock Controller as built-in
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 17/22] interconnect: qcom: icc-rpm: Control bus rpmcc from icc
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 21/22] interconnect: qcom: icc-rpm: Set correct bandwidth through RPM bw req
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 20/22] interconnect: qcom: icc-rpm: Set bandwidth on both contexts
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 18/22] clk: qcom: smd-rpm: Separate out interconnect bus clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 22/22] interconnect: qcom: icc-rpm: Fix bandwidth calculations
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 19/22] interconnect: qcom: icc-rpm: Fix bucket number
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 16/22] interconnect: qcom: qcm2290: Hook up RPM bus clk definitions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 15/22] interconnect: qcom: msm8916: Hook up RPM bus clk definitions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 14/22] interconnect: qcom: msm8939: Hook up RPM bus clk definitions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 08/22] interconnect: qcom: Fold smd-rpm.h into icc-rpm.h
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 09/22] interconnect: qcom: smd-rpm: Add rpmcc handling skeleton code
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 12/22] interconnect: qcom: msm8996: Hook up RPM bus clk definitions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 10/22] interconnect: qcom: Define RPM bus clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 11/22] interconnect: qcom: sdm660: Hook up RPM bus clk definitions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 07/22] interconnect: qcom: Add missing headers in icc-rpm.h
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 13/22] interconnect: qcom: qcs404: Hook up RPM bus clk definitions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 06/22] interconnect: qcom: icc-rpm: Introduce keep_alive
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 05/22] soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 04/22] clk: qcom: smd-rpm: Move some RPM resources to the common header
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 02/22] soc: qcom: smd-rpm: Add QCOM_SMD_RPM_STATE_NUM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 00/22] Restructure RPM SMD ICC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 03/22] soc: qcom: smd-rpm: Use tabs for defines
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 01/22] dt-bindings: interconnect: Add Qcom RPM ICC bindings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] interconnect: qcom: rpmh: add optional mask to send as vote
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] arm64: defconfig: enable Qualcomm MSM8996 Global Clock Controller as built-in
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: patches dropped from drm-misc-next [Was: Re: [PATCH 00/53] drm: Convert to platform remove callback returning] void
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: Drop aux devices together with DP controller
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] soc: qcom: rpmpd: Add sync_state
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH net-next v2 17/17] net: Kill MSG_SENDPAGE_NOTLAST
  • From: David Howells <dhowells@xxxxxxxxxx>
• Re: patches dropped from drm-misc-next [Was: Re: [PATCH 00/53] drm: Convert to platform remove callback returning] void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 5/6] arm64: dts: qcom: sm8550-mtp: add pmic glink port/endpoints
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 6/6] arm64: dts: qcom: sm8550-qrd: add pmic glink port/endpoints
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] interconnect: qcom: sm8550: add enable_mask for bcm nodes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>