The MSM8998 clock controller drivers have some rough edges around whether
and how Linux should touch them, which this series tries to sand down
a bit.
MSM8998 maple seems not to explode, please give it a spin on your boards.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
Konrad Dybcio (9):
dt-bindings: clk: qcom,gcc-msm8998: Add missing GPU/MMSS GPLL0 legs
dt-bindings: clock: qcom,mmcc: Add GPLL0_DIV for MSM8998
clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly
clk: qcom: mmcc-msm8998: Properly consume GPLL0 inputs
clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTs
clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
clk: qcom: gcc-msm8998: Don't poke at some BIMC GPU clocks
arm64: dts: qcom: msm8998: Use the correct GPLL0 leg for GPUCC
arm64: dts: qcom: msm8998: Use the correct GPLL0_DIV leg for MMCC
.../devicetree/bindings/clock/qcom,mmcc.yaml | 2 +
arch/arm64/boot/dts/qcom/msm8998.dtsi | 8 +-
drivers/clk/qcom/gcc-msm8998.c | 92 ++++++++++++++--------
drivers/clk/qcom/gpucc-msm8998.c | 2 +-
drivers/clk/qcom/mmcc-msm8998.c | 35 ++------
include/dt-bindings/clock/qcom,gcc-msm8998.h | 3 +
6 files changed, 80 insertions(+), 62 deletions(-)
---
base-commit: c87d46a9e8ebd2f2c3960927b1d21687096d1109
change-id: 20230622-topic-8998clk-4317986f3008
Best regards,
--
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
