[PATCH v4 09/11] thermal/drivers/qcom: remove redundant msg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The upper-layer devm_thermal_add_hwmon_sysfs() function can directly
print error information.

Signed-off-by: Yangtao Li <frank.li@xxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/thermal/qcom/qcom-spmi-adc-tm5.c    | 4 +---
 drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 4 +---
 drivers/thermal/qcom/tsens.c                | 4 +---
 3 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
index 5749149ae2e4..5ddc39b2be32 100644
--- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -689,9 +689,7 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
 			return PTR_ERR(tzd);
 		}
 		adc_tm->channels[i].tzd = tzd;
-		if (devm_thermal_add_hwmon_sysfs(adc_tm->dev, tzd))
-			dev_warn(adc_tm->dev,
-				 "Failed to add hwmon sysfs attributes\n");
+		devm_thermal_add_hwmon_sysfs(adc_tm->dev, tzd);
 	}
 
 	return 0;
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index 0f88e98428ac..2a3b3e21260f 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -459,9 +459,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev))
-		dev_warn(&pdev->dev,
-			 "Failed to add hwmon sysfs attributes\n");
+	devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev);
 
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr,
 					IRQF_ONESHOT, node->name, chip);
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index d3218127e617..f99b0539468b 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -1189,9 +1189,7 @@ static int tsens_register(struct tsens_priv *priv)
 		if (priv->ops->enable)
 			priv->ops->enable(priv, i);
 
-		if (devm_thermal_add_hwmon_sysfs(priv->dev, tzd))
-			dev_warn(priv->dev,
-				 "Failed to add hwmon sysfs attributes\n");
+		devm_thermal_add_hwmon_sysfs(priv->dev, tzd);
 	}
 
 	/* VER_0 require to set MIN and MAX THRESH
-- 
2.39.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux