Re: [PATCH 6/9] clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22.06.2023 13:57, Konrad Dybcio wrote:
> Some branch clocks are governed externally and we're only supposed to
> send a request concerning their shutdown, not actually ensure it happens.
> 
> Use the BRANCH_HALT_SKIP define to skip checking the halt bit.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
Whoops. Again, right after hitting send, I noticed this one was already
sent with 

https://lore.kernel.org/linux-arm-msm/20230531-topic-8998_mmssclk-v1-0-2b5a8fc90991@xxxxxxxxxx/
>  drivers/clk/qcom/gcc-msm8998.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
> index cccb19cae481..ef410f52f09f 100644
> --- a/drivers/clk/qcom/gcc-msm8998.c
> +++ b/drivers/clk/qcom/gcc-msm8998.c
> @@ -2112,7 +2112,7 @@ static struct clk_branch gcc_gp3_clk = {
>  
>  static struct clk_branch gcc_bimc_gfx_clk = {
>  	.halt_reg = 0x46040,
> -	.halt_check = BRANCH_HALT,
> +	.halt_check = BRANCH_HALT_SKIP,
>  	.clkr = {
>  		.enable_reg = 0x46040,
>  		.enable_mask = BIT(0),
> @@ -2125,7 +2125,7 @@ static struct clk_branch gcc_bimc_gfx_clk = {
>  
>  static struct clk_branch gcc_gpu_bimc_gfx_clk = {
>  	.halt_reg = 0x71010,
> -	.halt_check = BRANCH_HALT,
> +	.halt_check = BRANCH_HALT_SKIP,
>  	.clkr = {
>  		.enable_reg = 0x71010,
>  		.enable_mask = BIT(0),
> @@ -2151,7 +2151,7 @@ static struct clk_branch gcc_gpu_bimc_gfx_src_clk = {
>  
>  static struct clk_branch gcc_gpu_cfg_ahb_clk = {
>  	.halt_reg = 0x71004,
> -	.halt_check = BRANCH_HALT,
> +	.halt_check = BRANCH_HALT_SKIP,
>  	.clkr = {
>  		.enable_reg = 0x71004,
>  		.enable_mask = BIT(0),
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux