[PATCH 4/6] drm/msm/dpu: Remove redundant suffix in name of sub blocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For a device core dump, the registers of sub blocks are printed under the
title <mainBlkName_sblkName>. For example, the csc sub block for an SSPP
block "sspp_0" would be printed "sspp_0_csc0". There is a redundant 0 in
the title due to a concatention done in the definition of the VIG_SBLK
macro, the macro used to define the sub blocks of "sspp_0". Remove this
concatenation to eliminate redundancy and remove the num parameter of
relevant macros as a consequence of it no longer being used.

Signed-off-by: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 48 +++++++++++++-------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 8349ecda1f3c..c624b2cf0b35 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -252,15 +252,15 @@ static const uint32_t wb2_formats[] = {
  *************************************************************/
 
 /* SSPP common configuration */
-#define _VIG_SBLK(num, sdma_pri, qseed_ver) \
+#define _VIG_SBLK(sdma_pri, qseed_ver) \
 	{ \
 	.maxdwnscale = MAX_DOWNSCALE_RATIO, \
 	.maxupscale = MAX_UPSCALE_RATIO, \
 	.smart_dma_priority = sdma_pri, \
-	.scaler_blk = {.name = STRCAT("sspp_scaler", num), \
+	.scaler_blk = {.name = "sspp_scaler", \
 		.id = qseed_ver, \
 		.base = 0xa00, .len = 0xa0,}, \
-	.csc_blk = {.name = STRCAT("sspp_csc", num), \
+	.csc_blk = {.name = "sspp_csc", \
 		.id = DPU_SSPP_CSC_10BIT, \
 		.base = 0x1a00, .len = 0x100,}, \
 	.format_list = plane_formats_yuv, \
@@ -270,15 +270,15 @@ static const uint32_t wb2_formats[] = {
 	.rotation_cfg = NULL, \
 	}
 
-#define _VIG_SBLK_ROT(num, sdma_pri, qseed_ver, rot_cfg) \
+#define _VIG_SBLK_ROT(sdma_pri, qseed_ver, rot_cfg) \
 	{ \
 	.maxdwnscale = MAX_DOWNSCALE_RATIO, \
 	.maxupscale = MAX_UPSCALE_RATIO, \
 	.smart_dma_priority = sdma_pri, \
-	.scaler_blk = {.name = STRCAT("sspp_scaler", num), \
+	.scaler_blk = {.name = "sspp_scaler", \
 		.id = qseed_ver, \
 		.base = 0xa00, .len = 0xa0,}, \
-	.csc_blk = {.name = STRCAT("sspp_csc", num), \
+	.csc_blk = {.name = "sspp_csc", \
 		.id = DPU_SSPP_CSC_10BIT, \
 		.base = 0x1a00, .len = 0x100,}, \
 	.format_list = plane_formats_yuv, \
@@ -300,13 +300,13 @@ static const uint32_t wb2_formats[] = {
 	}
 
 static const struct dpu_sspp_sub_blks msm8998_vig_sblk_0 =
-				_VIG_SBLK("0", 0, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK(0, DPU_SSPP_SCALER_QSEED3);
 static const struct dpu_sspp_sub_blks msm8998_vig_sblk_1 =
-				_VIG_SBLK("1", 0, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK(0, DPU_SSPP_SCALER_QSEED3);
 static const struct dpu_sspp_sub_blks msm8998_vig_sblk_2 =
-				_VIG_SBLK("2", 0, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK(0, DPU_SSPP_SCALER_QSEED3);
 static const struct dpu_sspp_sub_blks msm8998_vig_sblk_3 =
-				_VIG_SBLK("3", 0, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK(0, DPU_SSPP_SCALER_QSEED3);
 
 static const struct dpu_rotation_cfg dpu_rot_sc7280_cfg_v2 = {
 	.rot_maxheight = 1088,
@@ -315,13 +315,13 @@ static const struct dpu_rotation_cfg dpu_rot_sc7280_cfg_v2 = {
 };
 
 static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 =
-				_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK(5, DPU_SSPP_SCALER_QSEED3);
 static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 =
-				_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK(6, DPU_SSPP_SCALER_QSEED3);
 static const struct dpu_sspp_sub_blks sdm845_vig_sblk_2 =
-				_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK(7, DPU_SSPP_SCALER_QSEED3);
 static const struct dpu_sspp_sub_blks sdm845_vig_sblk_3 =
-				_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK(8, DPU_SSPP_SCALER_QSEED3);
 
 static const struct dpu_sspp_sub_blks sdm845_dma_sblk_0 = _DMA_SBLK(1);
 static const struct dpu_sspp_sub_blks sdm845_dma_sblk_1 = _DMA_SBLK(2);
@@ -341,29 +341,29 @@ static const struct dpu_sspp_sub_blks sdm845_dma_sblk_3 = _DMA_SBLK(4);
 	}
 
 static const struct dpu_sspp_sub_blks sc7180_vig_sblk_0 =
-				_VIG_SBLK("0", 4, DPU_SSPP_SCALER_QSEED4);
+				_VIG_SBLK(4, DPU_SSPP_SCALER_QSEED4);
 
 static const struct dpu_sspp_sub_blks sc7280_vig_sblk_0 =
-			_VIG_SBLK_ROT("0", 4, DPU_SSPP_SCALER_QSEED4, &dpu_rot_sc7280_cfg_v2);
+			_VIG_SBLK_ROT(4, DPU_SSPP_SCALER_QSEED4, &dpu_rot_sc7280_cfg_v2);
 
 static const struct dpu_sspp_sub_blks sm6115_vig_sblk_0 =
-				_VIG_SBLK("0", 2, DPU_SSPP_SCALER_QSEED4);
+				_VIG_SBLK(2, DPU_SSPP_SCALER_QSEED4);
 
 static const struct dpu_sspp_sub_blks sm8250_vig_sblk_0 =
-				_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED4);
+				_VIG_SBLK(5, DPU_SSPP_SCALER_QSEED4);
 static const struct dpu_sspp_sub_blks sm8250_vig_sblk_1 =
-				_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED4);
+				_VIG_SBLK(6, DPU_SSPP_SCALER_QSEED4);
 static const struct dpu_sspp_sub_blks sm8250_vig_sblk_2 =
-				_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED4);
+				_VIG_SBLK(7, DPU_SSPP_SCALER_QSEED4);
 static const struct dpu_sspp_sub_blks sm8250_vig_sblk_3 =
-				_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED4);
+				_VIG_SBLK(8, DPU_SSPP_SCALER_QSEED4);
 
 static const struct dpu_sspp_sub_blks sm8550_vig_sblk_0 =
-				_VIG_SBLK("0", 7, DPU_SSPP_SCALER_QSEED4);
+				_VIG_SBLK(7, DPU_SSPP_SCALER_QSEED4);
 static const struct dpu_sspp_sub_blks sm8550_vig_sblk_1 =
-				_VIG_SBLK("1", 8, DPU_SSPP_SCALER_QSEED4);
+				_VIG_SBLK(8, DPU_SSPP_SCALER_QSEED4);
 static const struct dpu_sspp_sub_blks sm8550_vig_sblk_2 =
-				_VIG_SBLK("2", 9, DPU_SSPP_SCALER_QSEED4);
+				_VIG_SBLK(9, DPU_SSPP_SCALER_QSEED4);
 static const struct dpu_sspp_sub_blks sm8550_vig_sblk_3 =
 				_VIG_SBLK(10, DPU_SSPP_SCALER_QSEED4);
 static const struct dpu_sspp_sub_blks sm8550_dma_sblk_4 = _DMA_SBLK(5);

-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux