Modem subsystem in SDM630/660 is similar to MSM8998 and
device tree node for it is based on the one from msm8998.dtsi.
Signed-off-by: Alexey Minnekhanov <alexeymin@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm630.dtsi | 65 ++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 014237d4b5b2..ad01f2951154 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1028,6 +1028,71 @@ data-pins {
};
};
+ remoteproc_mss: remoteproc@4080000 {
+ compatible = "qcom,sdm660-mss-pil";
+ reg = <0x04080000 0x100>, <0x04180000 0x40>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&gcc GPLL0_OUT_MSSCC>,
+ <&gcc GCC_MSS_SNOC_AXI_CLK>,
+ <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+ <&rpmcc RPM_SMD_QDSS_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface",
+ "bus",
+ "mem",
+ "gpll0_mss",
+ "snoc_axi",
+ "mnoc_axi",
+ "qdss",
+ "xo";
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+
+ power-domains = <&rpmpd SDM660_VDDCX>,
+ <&rpmpd SDM660_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ status = "disabled";
+
+ mba {
+ memory-region = <&mba_region>;
+ };
+
+ mpss {
+ memory-region = <&mpss_region>;
+ };
+
+ glink-edge {
+ interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 15>;
+ };
+ };
+
adreno_gpu: gpu@5000000 {
compatible = "qcom,adreno-508.0", "qcom,adreno";
--
2.39.3
