Re: [PATCH V5 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 28, 2023 at 01:35:37PM +0530, Manivannan Sadhasivam wrote:
> On Wed, Aug 23, 2023 at 09:14:10PM +0530, Nitin Rawat wrote:
> > Add Support to configure CORE_CLK_1US_CYCLES, PA_VS_CORE_CLK_40NS_CYCLES
> > for multiple unipro clock frequencies. Currently this is handled only for
> > only 150Mhz and 75MHz.
> > 
> > Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
> > Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
> > Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
> > ---
> >  drivers/ufs/host/ufs-qcom.c | 88 ++++++++++++++++++++++++++++++++-----
> >  drivers/ufs/host/ufs-qcom.h |  9 ++++
> >  2 files changed, 87 insertions(+), 10 deletions(-)
> > 
> > diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> > index abc0e7f7d1b0..8162b19191a9 100644
> > --- a/drivers/ufs/host/ufs-qcom.c
> > +++ b/drivers/ufs/host/ufs-qcom.c
> > @@ -671,6 +671,45 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
> >  	return 0;
> >  }
> > 
> > +static int ufs_qcom_cfg_core_clk_ctrl(struct ufs_hba *hba)
> > +{
> > +	struct list_head *head = &hba->clk_list_head;
> > +	struct ufs_clk_info *clki;
> > +	u32 max_freq = 0;
> > +	int err;
> 
> Let's use "ret" from now onwards. Existing "err" can be cleaned up later.
> 
> > +
> > +	list_for_each_entry(clki, head, list) {
> > +		if (!IS_ERR_OR_NULL(clki->clk) &&
> > +			!strcmp(clki->name, "core_clk_unipro")) {
> 
> Odd indentation.
> 
> > +			max_freq = clki->max_freq;
> > +			break;
> > +		}
> > +	}
> > +
> > +	switch (max_freq) {
> > +	case MHZ_403:
> 
> UNIPRO_CORE_CLK_FREQ_403_MHZ?
> 
> Same applies to other defines.
> 
> > +		err = ufs_qcom_set_core_clk_ctrl(hba, 403, 16);
> 
> #define to_cycles_per_1us(freq)		(freq / (1000 * 1000))
> 
> 		ret = ufs_qcom_set_core_clk_ctrl(hba, to_cycles_per_1us(max_freq), 16);
> 

You could also use:

#define to_cycles_per_40us(freq) (freq / (25 * 1000 * 1000))

		ret = ufs_qcom_set_core_clk_ctrl(hba, to_cycles_per_1us(max_freq),
						 to_cycles_per_40us(max_freq));

This also gives me an impression that the caller could just pass the max_freq
and the ufs_qcom_set_core_clk_ctrl() function could internally calculate 1us and
40us cycles value.

- Mani

> > +		break;
> > +	case MHZ_300:
> > +		err = ufs_qcom_set_core_clk_ctrl(hba, 300, 12);
> > +		break;
> > +	case MHZ_201_5:
> > +		err = ufs_qcom_set_core_clk_ctrl(hba, 202, 8);
> > +		break;
> > +	case MHZ_150:
> > +		err = ufs_qcom_set_core_clk_ctrl(hba, 150, 6);
> > +		break;
> > +	case MHZ_100:
> > +		err = ufs_qcom_set_core_clk_ctrl(hba, 100, 4);
> > +		break;
> > +	default:
> > +		dev_err(hba->dev, "unipro max_freq=%u entry missing\n", max_freq);
> 
> "UNIPRO clk max frequency (%u) not supported!"
> 
> > +		err = -EINVAL;
> 
> -ERANGE
> 
> > +		break;
> > +	}
> > +
> > +	return err;
> > +}
> >  static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
> >  					enum ufs_notify_change_status status)
> >  {
> > @@ -686,12 +725,15 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
> >  			return -EINVAL;
> >  		}
> > 
> > -		if (ufs_qcom_cap_qunipro(host))
> > -			/*
> > -			 * set unipro core clock cycles to 150 & clear clock
> > -			 * divider
> > -			 */
> > -			err = ufs_qcom_set_core_clk_ctrl(hba, 150, 6);
> > +		if (ufs_qcom_cap_qunipro(host)) {
> > +			err = ufs_qcom_cfg_core_clk_ctrl(hba);
> > +			if (err) {
> > +				dev_err(hba->dev,
> > +					"%s cfg core clk ctrl failed\n",
> 
> "Failed to configure UNIPRO core clk"
> 
> > +					__func__);
> > +				return err;
> > +			}
> > +		}
> > 
> >  		/*
> >  		 * Some UFS devices (and may be host) have issues if LCC is
> > @@ -1369,8 +1411,7 @@ static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
> >  	if (!ufs_qcom_cap_qunipro(host))
> >  		return 0;
> > 
> > -	/* set unipro core clock cycles to 150 and clear clock divider */
> > -	return ufs_qcom_set_core_clk_ctrl(hba, 150, 6);
> > +	return ufs_qcom_cfg_core_clk_ctrl(hba);
> >  }
> > 
> >  static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
> > @@ -1401,12 +1442,39 @@ static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
> >  static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
> >  {
> >  	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> > +	struct list_head *head = &hba->clk_list_head;
> > +	struct ufs_clk_info *clki;
> > +	u32 curr_freq = 0;
> > +	int err;
> > 
> >  	if (!ufs_qcom_cap_qunipro(host))
> >  		return 0;
> > 
> > -	/* set unipro core clock cycles to 75 and clear clock divider */
> > -	return ufs_qcom_set_core_clk_ctrl(hba, 75, 3);
> > +
> > +	list_for_each_entry(clki, head, list) {
> > +		if (!IS_ERR_OR_NULL(clki->clk) &&
> > +			!strcmp(clki->name, "core_clk_unipro")) {
> > +			curr_freq = clk_get_rate(clki->clk);
> > +			break;
> > +		}
> > +	}
> > +	switch (curr_freq) {
> > +	case MHZ_37_5:
> > +		err = ufs_qcom_set_core_clk_ctrl(hba, 38, 2);
> > +		break;
> > +	case MHZ_75:
> > +		err = ufs_qcom_set_core_clk_ctrl(hba, 75, 3);
> > +		break;
> > +	case MHZ_100:
> > +		err = ufs_qcom_set_core_clk_ctrl(hba, 100, 4);
> > +		break;
> > +	default:
> > +		err = -EINVAL;
> > +		dev_err(hba->dev, "unipro curr_freq=%u entry missing\n", curr_freq);
> > +		break;
> > +	}
> > +
> > +	return err;
> 
> Why can't you use the existing ufs_qcom_cfg_core_clk_ctrl() function?
> 
> - Mani
> 
> >  }
> > 
> >  static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
> > diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
> > index 325f08aca260..56550fd36c4e 100644
> > --- a/drivers/ufs/host/ufs-qcom.h
> > +++ b/drivers/ufs/host/ufs-qcom.h
> > @@ -79,6 +79,15 @@ enum {
> >  	UFS_MEM_CQIS_VS		= 0x8,
> >  };
> > 
> > +/* QCOM UFS host controller core clk frequencies */
> > +#define MHZ_37_5	37500000
> > +#define MHZ_50		50000000
> > +#define MHZ_75		75000000
> > +#define MHZ_100		100000000
> > +#define MHZ_150		150000000
> > +#define MHZ_300		300000000
> > +#define MHZ_201_5	201500000
> > +#define MHZ_403		403000000
> >  #define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x)	(0x000 + x)
> >  #define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x)	(0x400 + x)
> > 
> > --
> > 2.17.1
> > 
> 
> -- 
> மணிவண்ணன் சதாசிவம்

-- 
மணிவண்ணன் சதாசிவம்



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux