Add USB phy and controller nodes.
Co-developed-by: Amandeep Singh <quic_amansing@xxxxxxxxxxx>
Signed-off-by: Amandeep Singh <quic_amansing@xxxxxxxxxxx>
Signed-off-by: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 54 +++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 9f13d2dcdfd5..ff477923a823 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -238,6 +238,60 @@
status = "disabled";
};
};
+
+ usbphy0: phy@5b000 {
+ compatible = "qcom,ipq5018-usb-hsphy";
+ reg = <0x0005b000 0x120>;
+
+ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+ resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb: usb2@8a00000 {
+ compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
+ reg = <0x08af8800 0x400>;
+
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq";
+
+ clocks = <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+ <&gcc GCC_USB0_SLEEP_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ resets = <&gcc GCC_USB0_BCR>;
+
+ qcom,select-utmi-as-pipe-clk;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ status = "disabled";
+
+ usb2_0_dwc: usb@8a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x08a00000 0xe000>;
+ clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "ref";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ phy-names = "usb2-phy";
+ phys = <&usbphy0>;
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ };
+ };
};
timer {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
