On 16.08.2023 13:51, Bryan O'Donoghue wrote:
> Switch on USB orientation-switching for usb_1_qmp via TCPM. Detecting the
> orientation switch is required to get the PHY to reset and bring-up the PHY
> with the CC lines set to the appropriate lane.
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 12 ++++++++++++
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 1 +
> 2 files changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index 3e34f4e2af14a..b878d765f8c42 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -1290,6 +1290,11 @@ &usb_1_qmpphy {
>
> vdda-phy-supply = <&vreg_l9a_1p2>;
> vdda-pll-supply = <&vreg_l18a_0p92>;
> + orientation-switch;
> +};
> +
> +&usb_1_qmpphy_out {
> + remote-endpoint = <&pm8150b_typec_mux_in>;
> };
>
> &usb_2 {
> @@ -1374,6 +1379,13 @@ pm8150b_role_switch_in: endpoint {
> remote-endpoint = <&usb_1_role_switch_out>;
> };
> };
> +
> + port@1 {
> + reg = <1>;
> + pm8150b_typec_mux_in: endpoint {
should also go to pmic dt
Konrad
