Re: [PATCH 6/7] arm64: dts: qcom: ipq5018: Add tsens node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 28 Aug 2023 at 22:20, Sricharan Ramabadhran
<quic_srichara@xxxxxxxxxxx> wrote:
>
> IPQ5018 has tsens V1.0 IP with 4 sensors.
> There is no RPM, so tsens has to manually enabled.
> Adding the tsens and nvmem node.
>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/ipq5018.dtsi | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 9f13d2dcdfd5..277b3cfc7f72 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -93,6 +93,29 @@ soc: soc@0 {
>                 #size-cells = <1>;
>                 ranges = <0 0 0 0xffffffff>;
>
> +               qfprom_nvmem: qfprom_nvmem@a0000 {
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +                       compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
> +                       reg = <0xa0000 0x1000>;
> +
> +                       tsens_calib: calib@248 {
> +                               reg = <0x248 0x10>;
> +                       };

NAK. Please define per-sensor fields here.

> +               };
> +
> +               tsens: thermal-sensor@4a9000 {
> +                       compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1";
> +                       reg = <0x4a9000 0x1000>, /* TM */
> +                             <0x4a8000 0x1000>; /* SORT */
> +                       nvmem-cells = <&tsens_calib>;
> +                       nvmem-cell-names = "calib";
> +                       interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>;
> +                       interrupt-names = "uplow";
> +                       #qcom,sensors = <5>;
> +                       #thermal-sensor-cells = <1>;
> +               };
> +
>                 tlmm: pinctrl@1000000 {
>                         compatible = "qcom,ipq5018-tlmm";
>                         reg = <0x01000000 0x300000>;
> --
> 2.34.1
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux