DWC3 driver needs access to XHCI Extended Capabilities registers to
read number of usb2 ports and usb3 ports present on multiport controller.
Since the extcaps header is sufficient to parse this info, move port_count
related macros and structure from xhci.h to xhci-ext-caps.h.
Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
drivers/usb/host/xhci-ext-caps.h | 27 +++++++++++++++++++++++++++
drivers/usb/host/xhci.h | 27 ---------------------------
2 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index e8af0a125f84..96eb36a58738 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -79,6 +79,33 @@
/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
#define XHCI_STS_CNR (1 << 11)
+/**
+ * struct xhci_protocol_caps
+ * @revision: major revision, minor revision, capability ID,
+ * and next capability pointer.
+ * @name_string: Four ASCII characters to say which spec this xHC
+ * follows, typically "USB ".
+ * @port_info: Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+ u32 revision;
+ u32 name_string;
+ u32 port_info;
+};
+
+#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
+#define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff)
+#define XHCI_EXT_PORT_PSIC(x) (((x) >> 28) & 0x0f)
+#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
+#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
+
+#define XHCI_EXT_PORT_PSIV(x) (((x) >> 0) & 0x0f)
+#define XHCI_EXT_PORT_PSIE(x) (((x) >> 4) & 0x03)
+#define XHCI_EXT_PORT_PLT(x) (((x) >> 6) & 0x03)
+#define XHCI_EXT_PORT_PFD(x) (((x) >> 8) & 0x01)
+#define XHCI_EXT_PORT_LP(x) (((x) >> 14) & 0x03)
+#define XHCI_EXT_PORT_PSIM(x) (((x) >> 16) & 0xffff)
+
#include <linux/io.h>
/**
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7e282b4522c0..77016338bee1 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -558,33 +558,6 @@ struct xhci_doorbell_array {
#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
#define DB_VALUE_HOST 0x00000000
-/**
- * struct xhci_protocol_caps
- * @revision: major revision, minor revision, capability ID,
- * and next capability pointer.
- * @name_string: Four ASCII characters to say which spec this xHC
- * follows, typically "USB ".
- * @port_info: Port offset, count, and protocol-defined information.
- */
-struct xhci_protocol_caps {
- u32 revision;
- u32 name_string;
- u32 port_info;
-};
-
-#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
-#define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff)
-#define XHCI_EXT_PORT_PSIC(x) (((x) >> 28) & 0x0f)
-#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
-#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
-
-#define XHCI_EXT_PORT_PSIV(x) (((x) >> 0) & 0x0f)
-#define XHCI_EXT_PORT_PSIE(x) (((x) >> 4) & 0x03)
-#define XHCI_EXT_PORT_PLT(x) (((x) >> 6) & 0x03)
-#define XHCI_EXT_PORT_PFD(x) (((x) >> 8) & 0x01)
-#define XHCI_EXT_PORT_LP(x) (((x) >> 14) & 0x03)
-#define XHCI_EXT_PORT_PSIM(x) (((x) >> 16) & 0xffff)
-
#define PLT_MASK (0x03 << 6)
#define PLT_SYM (0x00 << 6)
#define PLT_ASYM_RX (0x02 << 6)
--
2.40.0
