Re: [PATCH] ARM: dts: qcom: apq8960: reflect that memory node starts at offset 0

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>]

On 12.08.2023 20:32, David Heidelberg wrote:
> Fixes warning generated by `make qcom-msm8960-cdp.dtb`:
> arch/arm/boot/dts/qcom-msm8960-cdp.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 0]]}
> 
> Signed-off-by: David Heidelberg <david@xxxxxxx>
> ---
But does it really?

i.e., if you boot it on a device and xxd /sys/firmware/devicetree/base/memory
or decompile /sys/firmware/fdt, is it updated to <0x0 0xsomesize>?

Konrad
>  arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
> index c10797f3793c..c20f16845a97 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
> @@ -47,7 +47,7 @@ L2: l2-cache {
>  		};
>  	};
>  
> -	memory {
> +	memory@0 {
>  		device_type = "memory";
>  		reg = <0x0 0x0>;
>  	};