DRI Development

• Thread Index

• [PATCH 6/6] drm: panel: nv3052c: Add a panel for RG CubeXX
  • From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
• [PATCH 5/6] dt-bindings: display: panel: Add a panel for RG CubeXX
  • From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
• [PATCH 4/6] drm: panel: nv3052c: Add a panel for RG40XX series
  • From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
• [PATCH 3/6] dt-bindings: display: panel: Add a panel for RG40XX series
  • From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
• [PATCH 2/6] drm: panel: nv3052c: Add another panel for RG35XX Plus (Rev6)
  • From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
• [PATCH 1/6] dt-bindings: display: panel: Add another panel for RG35XX Plus (Rev6)
  • From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
• [PATCH 0/6] drm/panel: nv3052c: Add support for new Anbernic panels
  • From: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>
• Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
  • From: Mithil Bavishi <bavishimithil@xxxxxxxxx>
• Re: [PATCH v2 08/11] drm/msm: adreno: request for maximum bus bandwidth usage
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v2 20/28] fbdev: clps711x-fb: Replace check_fb in favor of struct fb_info.lcd_dev
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
  • From: Mithil Bavishi <bavishimithil@xxxxxxxxx>
• Re: [PATCH v2 02/11] drm/msm: adreno: rename quirks that are features
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v3 06/10] ARM: dts: ti: omap: espresso-common: Add common device tree for Samsung Galaxy Tab 2 series
  • From: Mithil Bavishi <bavishimithil@xxxxxxxxx>
• Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
  • From: Mithil Bavishi <bavishimithil@xxxxxxxxx>
• Re: Re: [PATCH v3 08/10] ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy Tab 2 7.0
  • From: Mithil Bavishi <bavishimithil@xxxxxxxxx>
• Re: [v10,3/3] drm/rockchip: Add basic RK3588 HDMI output support
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add lid switch
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: display: panel: samsung,atna56ac03: Document ATNA56AC03
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/cirrus: Use virtual encoder and connector types
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/9] dt-bindings: display/msm: dsi-controller-main: Document SM6150
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/9] dt-bindings: display/msm: Add SM6150 DSI phy
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 0/9] Add display support for QCS615 platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 3/9] dt-bindings: display/msm: Add SM6150 MDSS & DPU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 0/9] Add display support for QCS615 platform
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [v10,3/3] drm/rockchip: Add basic RK3588 HDMI output support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add lid switch
  • From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: qcom: x1e80100-vivobook-s15: Use the samsung,atna33xc20 panel driver
  • From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
  • From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
• [PATCH v2 0/4] Asus vivobook s15 improvements
  • From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: display: panel: samsung,atna56ac03: Document ATNA56AC03
  • From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: display: panel: samsung,atna56ac03: Document ATNA56AC03
  • From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
  • From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add lid switch
  • From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
• [PATCH 2/4] arm64: dts: qcom: x1e80100-vivobook-s15: Use the samsung,atna33xc20 panel driver
  • From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
• [PATCH 0/4] Asus vivobook s15 improvements
  • From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@xxxxxxxxxx>
• Re: [PATCH RFC v2 17/18] drm/vkms: Introduce config for connector EDID
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• Re: [PATCH] ammdgpu fix for gfx1103 queue evict/restore crash
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] ammdgpu fix for gfx1103 queue evict/restore crash
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 3/3] drm/msm/mdss: use boolean values for macrotile_mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/3] drm/msm/mdss: reuse defined bitfields for UBWC 2.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/3] drm/msm/mdss: define bitfields for the UBWC_STATIC register
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/3] drm/msm/mdss: rework UBWC registers programming
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• RE: [PATCHv6 7/8] drm/i915/histogram: Histogram changes for Display 20+
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH] drm/msm: UAPI error reporting
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Kernel warning in dcn30_dpp.c; short freezing, crashes in KWin
  • From: Forest Crossman <cyrozap@xxxxxxxxx>
• Re: [PATCH] drm/msm: UAPI error reporting
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: Add VBIF to DPU snapshot
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 00/13] acpi/x86: s2idle: implement Modern Standby transition states and expose to userspace
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: Add VBIF to DPU snapshot
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH] drm/msm/dpu: Add VBIF to DPU snapshot
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH RFC v2 17/18] drm/vkms: Introduce config for connector EDID
  • From: Ian Forbes <ian.forbes@xxxxxxxxxxxx>
• [PATCH v2] drm/vmwgfx: Add Fake EDID
  • From: Ian Forbes <ian.forbes@xxxxxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Petr Vorel <pvorel@xxxxxxx>
• Re: [PATCHv2 2/3] drm/plane: Expose function to create format/modifier blob
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] nouveau: Remove unused functions
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [RFC 00/13] acpi/x86: s2idle: implement Modern Standby transition states and expose to userspace
  • From: Xaver Hugl <xaver.hugl@xxxxxxx>
• Re: [PATCH V11 00/10] AMD XDNA driver
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• Re: [PATCH V11 00/10] AMD XDNA driver
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v2] drm/rockchip: vop2: fix rk3588 dp+dsi maxclk verification
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH] accel/qaic: Drop redundant vfree() null check in sahara
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH RFC v2 00/16] drm/vkms: ConfigFS interface
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 15/16] drm/vkms: Introduce configfs for connector EDID
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 13/16] drm/vkms: Introduce configfs for connector status
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 14/16] drm/vkms: Introduce configfs for connector id
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 16/16] drm/vkms: Introduce configfs for encoder type
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 11/16] drm/vkms: Introduce configfs for plane format
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 08/16] drm/vkms: Introduce configfs for crtc and encoder
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 12/16] drm/vkms: Introduce configfs for device name
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 10/16] drm/vkms: Introduce configfs for connector type
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 09/16] drm/vkms: Introduce configfs for connectors
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 07/16] drm/vkms: Introduce configfs for plane color range
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 04/16] drm/vkms: Introduce configfs for plane
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 06/16] drm/vkms: Introduce configfs for plane color encoding
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 03/16] drm/vkms: Introduce ConfigFS interface
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 02/16] drm/vkms: Cleanup configuration field on device destroy
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 05/16] drm/vkms: Introduce configfs for plane rotation
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 00/16] drm/vkms: ConfigFS interface
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 01/16] drm/vkms: Add vkms_delete/create_device helper
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 18/18] drm/vkms: Introduce config for encoder type
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 15/18] drm/vkms: Introduce config for plane format
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 13/18] drm/vkms: Introduce config for connector
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 16/18] drm/vkms: Introduce config for connector status
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 17/18] drm/vkms: Introduce config for connector EDID
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 10/18] drm/vkms: Introduce config for encoder name
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 12/18] drm/vkms: Add test for config structure
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 08/18] drm/vkms: Introduce config for plane color range
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 07/18] drm/vkms: Introduce config for plane color encoding
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 14/18] drm/vkms: Introduce config for connector type
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 06/18] drm/vkms: Introduce config for plane rotation
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 04/18] drm/vkms: Introduce config for plane
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 11/18] drm/vkms: Introduce config for CRTC name
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 09/18] drm/vkms: Introduce config for CRTCs and encoders
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 05/18] drm/vkms: Introduce config for plane name
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 01/18] drm/vkms: Extract vkms_config header
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 03/18] drm/vkms: Move default_config creation to its own function
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 02/18] drm/vkms: Add a validation function for vkms configuration
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH RFC v2 00/18] drm/vkms: Introduce detailed configuration
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• Re: [PATCH 1/2] drm/sched: add WARN_ON and BUG_ON to drm_sched_fini
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v14 4/7] drm: Export symbols to use in tests
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH v2 2/4] drm/vkms: Switch to dynamic allocation for encoder
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v2 4/4] drm/vkms: Rename vkms_output to vkms_crtc
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v2 3/4] drm/vkms: Switch to dynamic allocation for CRTC
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v2 1/4] drm/vkms: Switch to dynamic allocation for connector
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v2 0/4] drm/vkms: Switch to allocated for drm objects
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v5 4/5] drm: writeback: Introduce drm managed helpers
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v5 3/5] drm/vkms: Switch to managed for crtc
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v5 5/5] drm/vkms: Switch to managed for writeback connector
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v5 2/5] drm/vkms: Switch to managed for encoder
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v5 1/5] drm/vkms: Switch to managed for connector
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v5 0/5] drm/vkms: Switch all vkms object to DRM managed objects
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v3 3/3] drm/vkms: Add support for XRGB2101010
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v3 1/3] drm/vkms: Re-introduce line-by-line algorithm for writeback
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v3 2/3] drm/vkms: Add a macro for write_line functions
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v3 0/3] drm/vkms: Reimplement line-per-line pixel conversion for writeback
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• Re: [PATCH 1/2] drm/sched: add WARN_ON and BUG_ON to drm_sched_fini
  • From: Philipp Stanner <pstanner@xxxxxxxxxx>
• Re: [PATCH] dma-buf: fix dma_fence_array_signaled v4
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxxx>
• [PATCH v3 3/8] drm/vkms: Add support for ARGB16161616 formats
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v3 5/8] drm/vkms: Add support for RGB888 formats
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v3 6/8] drm/vkms: Change YUV helpers to support u16 inputs for conversion
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v3 7/8] drm/vkms: Create helper macro for YUV formats
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v3 8/8] drm/vkms: Add P01* formats
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v3 2/8] drm/vkms: Add support for ARGB8888 formats
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v3 4/8] drm/vkms: Add support for RGB565 formats
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v3 1/8] drm/vkms: Create helpers macro to avoid code duplication in format callbacks
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v3 0/8] drm/vkms: Add support for multiple plane formats
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 7/7] drm/vkms: Add support for DRM_FORMAT_R*
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 3/7] drm/vkms: Drop YUV formats TODO
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 4/7] drm: Export symbols to use in tests
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 5/7] drm/vkms: Create KUnit tests for YUV conversions
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 6/7] drm/vkms: Add how to run the Kunit tests
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 2/7] drm/vkms: Add range and encoding properties to the plane
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 1/7] drm/vkms: Add YUV support
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 0/7] drm/vkms: Add support for YUV and DRM_FORMAT_R*
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• Re: [PATCH v9 1/4] drm: Introduce device wedged event
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH] drm/msm: UAPI error reporting
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [pull] amdgpu, amdkfd, radeon drm-fixes-6.13
  • From: Alex Deucher <alexander.deucher@xxxxxxx>
• [PATCH] dma-buf: fix dma_fence_array_signaled v4
  • From: "Christian König" <ckoenig.leichtzumerken@xxxxxxxxx>
• Re: [PATCH v1 3/7] drm/mediatek: mtk_cec: Switch to register as module_platform_driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] drm/amdgpu: Make the submission path memory reclaim safe
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: Phase out ttm_exec
  • From: Christian König <ckoenig.leichtzumerken@xxxxxxxxx>
• Re: [PATCH 1/3] drm/dp: extract drm_dp_dpcd_poll_act_handled()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH] drm/amdgpu: Make the submission path memory reclaim safe
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v2 2/2] drm/bridge: tc358767: Improve DPI output pixel clock accuracy
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v14 0/9] drm/vkms: Reimplement line-per-line pixel conversion for plane reading
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• Re: [PATCH 1/3] drm/dp: extract drm_dp_dpcd_poll_act_handled()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] drm/msm: UAPI error reporting
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/v3d: Stop active perfmon if it is being destroyed
  • From: Maíra Canal <mcanal@xxxxxxxxxx>
• Re: [PATCH v4 3/7] drm/connector: implement generic HDMI codec helpers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/amdgpu: Make the submission path memory reclaim safe
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxx>
• Re: [PATCH v4 3/7] drm/connector: implement generic HDMI codec helpers
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 01/29] dma-fence: Add dma_fence_preempt base class
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [RFC PATCH 02/29] dma-fence: Add dma_fence_user_fence
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v3 8/9] arm64: dts: qcom: Add display support for QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 7/9] drm/msm/dsi: Add support for SM6150
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 1/4] drm: Introduce device wedged event
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v3 6/9] drm/msm/dsi: Add dsi phy support for SM6150
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3] drm/vkms: Remove index parameter from init_vkms_output
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• Re: [PATCH v3 5/9] drm/msm/dpu: Add SM6150 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 4/9] drm/msm: mdss: Add SM6150 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 8/9] arm64: dts: qcom: Add display support for QCS615
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 7/9] drm/msm/dsi: Add support for SM6150
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 6/9] drm/msm/dsi: Add dsi phy support for SM6150
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 5/9] drm/msm/dpu: Add SM6150 support
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 4/9] drm/msm: mdss: Add SM6150 support
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 3/9] dt-bindings: display/msm: Add SM6150 MDSS & DPU
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 2/9] dt-bindings: display/msm: dsi-controller-main: Document SM6150
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 1/9] dt-bindings: display/msm: Add SM6150 DSI phy
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 0/9] Add display support for QCS615 platform
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH 0/5] clk: Fix simple video pipelines on i.MX8
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/rockchip: avoid 64-bit division
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v4 0/2] Refactor MST DSC Determination Policy
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 3/7] drm/tidss: Remove extra K2G check
  • From: Devarsh Thakkar <devarsht@xxxxxx>
• Re: [PATCH 2/7] drm/tidss: Remove unused OCP error flag
  • From: Devarsh Thakkar <devarsht@xxxxxx>
• Re: [PATCH v1 7/7] drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH] drm/rockchip: avoid 64-bit division
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PULL] drm-misc-next
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH v4 10/10] drm/sun4i: use drm_atomic_helper_connector_hdmi_check()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 09/10] drm/bridge: dw-hdmi-qp: replace mode_valid with tmds_char_rate
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 08/10] drm/bridge: lontium-lt9611: drop TMDS char rate check in mode_valid
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 07/10] drm/display: bridge_connector: use drm_bridge_connector_mode_valid()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 06/10] drm/vc4: use drm_hdmi_connector_mode_valid()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 05/10] drm/sun4i: use drm_hdmi_connector_mode_valid()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 04/10] drm/display: hdmi: add generic mode_valid helper
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 03/10] drm/tests: hdmi: return meaningful value from set_connector_edid()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 02/10] drm/tests: hdmi: rename connector creation function
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 01/10] drm/tests: hdmi: handle empty modes in find_preferred_mode()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 00/10] drm/display: hdmi: add drm_hdmi_connector_mode_valid()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/rockchip: avoid 64-bit division
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCHv6 5/8] drm/i915/histogram: Add crtc properties for global histogram
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• RE: [PATCHv6 7/8] drm/i915/histogram: Histogram changes for Display 20+
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• Re: [PATCH 7/7] drm/tidss: Rename 'wait_lock' to 'irq_lock'
  • From: Devarsh Thakkar <devarsht@xxxxxx>
• Re: [PATCHv6 5/8] drm/i915/histogram: Add crtc properties for global histogram
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/7] drm/tidss: Add printing of underflows
  • From: Devarsh Thakkar <devarsht@xxxxxx>
• Re: [PATCH 00/37] drm/vc4: Add support for BCM2712 / Pi5 display hardware
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• RE: [PATCHv6 7/8] drm/i915/histogram: Histogram changes for Display 20+
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH v1 6/6] drm/mediatek: Add support for MT8195 Digital Parallel Interface
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v9 1/4] drm: Introduce device wedged event
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH v1 3/6] drm/mediatek: mtk_dpi: Use an array for pixclk factor calculation
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH 0/5] clk: Fix simple video pipelines on i.MX8
  • From: Liu Ying <victor.liu@xxxxxxx>
• RE: [PATCHv6 5/8] drm/i915/histogram: Add crtc properties for global histogram
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• Re: Phase out ttm_exec
  • From: Zack Rusin <zack.rusin@xxxxxxxxxxxx>
• Re: [PATCHv2 3/3] drm/i915/display: Populate list of async supported formats/modifiers
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 3/6] drm/mediatek: mtk_dpi: Use an array for pixclk factor calculation
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• RE: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
  • From: Ying Liu <victor.liu@xxxxxxx>
• Re: [RFC PATCH 02/29] dma-fence: Add dma_fence_user_fence
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v5 4/9] drm/vs: Add Hardware Functions for VS DC8200
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 drm-dp 5/5] drm/hisilicon/hibmc: add dp module in hibmc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 drm-dp 4/5] drm/hisilicon/hibmc: separate struct of vdac
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 drm-dp 3/5] drm/hisilicon/hibmc: add dp hw moduel in hibmc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 drm-dp 2/5] drm/hisilicon/hibmc: add dp link moduel in hibmc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 2/6] drm/mediatek: mtk_dpi: Add support for Pattern Generator in debugfs
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH] nouveau: Remove unused functions
  • From: "Dr. David Alan Gilbert" <linux@xxxxxxxxxxx>
• Re: [PATCH v1 1/6] dt-bindings: display: mediatek: dpi: Add MT8195 and MT8188 compat
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v5 drm-dp 1/5] drm/hisilicon/hibmc: add dp aux in hibmc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 7/7] drm/bridge_connector: hook drm_atomic_helper_connector_hdmi_update_edid()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 6/7] drm/display/hdmi: implement connector update functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 5/7] drm/bridge: lt9611: switch to using the DRM HDMI codec framework
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 4/7] drm/bridge: connector: add support for HDMI codec framework
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 3/7] drm/connector: implement generic HDMI codec helpers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 2/7] ASoC: hdmi-codec: move no_capture_mute to struct hdmi_codec_pdata
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 1/7] ASoC: hdmi-codec: pass data to get_dai_id too
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 0/7] drm: add DRM HDMI Codec framework
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 9/9] drm/vs: Add VS DRM Master Driver for JH7110 SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 7/9] drm/vs: Add VS Plane API
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 6/9] drm/vs: Add CRTC Functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 5/9] drm/vs: Add Base API for VS Mode Configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 4/9] drm/vs: Add Hardware Functions for VS DC8200
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 8/9] drm/vs: Add Innosilicon HDMI Support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [git pull] drm for 6.13-rc1
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCHv6 5/8] drm/i915/histogram: Add crtc properties for global histogram
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• RE: [PATCH v4 0/2] Refactor MST DSC Determination Policy
  • From: "Zuo, Jerry" <Jerry.Zuo@xxxxxxx>
• Re: [PATCH v4 15/18] dt-bindings: usb: Add ports to google,cros-ec-typec for DP altmode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 30/37] clk: bcm: rpi: Add ISP to exported clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 31/37] clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 32/37] clk: bcm: rpi: Enable minimize for all firmware clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [RFC 13/13] PM: standby: Add sysfs attribute for modern standby transitions
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• [RFC 05/13] acpi/x86: s2idle: add modern standby transition function
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• [RFC 09/13] acpi/x86: s2idle: call Sleep Entry/Exit as part of callbacks
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• Re: [PATCH 33/37] clk: bcm: rpi: Create helper to retrieve private data
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RFC 05/13] acpi/x86: s2idle: add modern standby transition function
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• [RFC 01/13] Documentation: PM: Add documentation for S0ix Standby States
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• Re: [RFC 11/13] acpi/x86: s2idle: add quirk table for modern standby delays
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• Re: [RFC 01/13] Documentation: PM: Add documentation for S0ix Standby States
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• [RFC 08/13] acpi/x86: s2idle: rename MS Exit/Entry to Sleep Exit/Entry
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• [RFC 04/13] acpi/x86: s2idle: add support for Turn On Display callback
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• [RFC 00/13] acpi/x86: s2idle: implement Modern Standby transition states and expose to userspace
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• Re: [PATCH 34/37] clk: bcm: rpi: Add disp clock
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [RFC 12/13] platform/x86: asus-wmi: remove Ally (1st gen) and Ally X suspend quirk
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• [RFC 02/13] acpi/x86: s2idle: add support for Display Off and Display On callbacks
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• [RFC 07/13] acpi/x86: s2idle: call Display On/Off as part of callbacks
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• Re: [RFC 01/13] Documentation: PM: Add documentation for S0ix Standby States
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• [RFC 10/13] acpi/x86: s2idle: add Turn On Display and call as part of callback
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• Re: [PATCH v2 8/9] arm64: dts: qcom: Add display support for QCS615 RIDE board
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• [RFC 11/13] acpi/x86: s2idle: add quirk table for modern standby delays
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• [RFC 06/13] acpi/x86: s2idle: rename Screen On/Off to Display On/Off
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• Re: [PATCH v2 6/9] drm/msm/dsi: Add support for QCS615
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH v2 6/9] drm/msm/dsi: Add support for QCS615
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• [RFC 03/13] acpi/x86: s2idle: add support for Sleep Entry and Sleep Exit callbacks
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• Re: [RFC 01/13] Documentation: PM: Add documentation for S0ix Standby States
  • From: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/2] misc: fastrpc: Rename tgid and pid to client_id
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/2] misc: fastrpc: Add support for multiple PD from one process
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: i2c-qcom-geni: Update compile dependenices for I2C GENI driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v1 1/1] drm/xe: fix the ERR_PTR() returned on failure to allocate tiny pt
  • From: Mirsad Todorovac <mtodorovac69@xxxxxxxxx>
• Re: [RFC 01/13] Documentation: PM: Add documentation for S0ix Standby States
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH 2/2] drm/sched: Fix docu of drm_sched_entity_flush()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 1/7] dt-bindings: display: mediatek: Add binding for HDMIv2 DDC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2 v2] bcachefs: do not use PF_MEMALLOC_NORECLAIM
  • From: Simona Vetter <simona.vetter@xxxxxxxx>
• [PATCH] ammdgpu fix for gfx1103 queue evict/restore crash
  • From: Mika Laitio <lamikr@xxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [RFC 01/13] Documentation: PM: Add documentation for S0ix Standby States
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PULL] drm-xe-next-fixes
  • From: Thomas Hellstrom <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [RFC 01/13] Documentation: PM: Add documentation for S0ix Standby States
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH v1 4/4] misc: fastrpc: Add debugfs support for fastrpc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH 01/29] dma-fence: Add dma_fence_preempt base class
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [RFC 05/13] acpi/x86: s2idle: add modern standby transition function
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH 1/2] drm/sched: add WARN_ON and BUG_ON to drm_sched_fini
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH 1/2] drm/sched: add WARN_ON and BUG_ON to drm_sched_fini
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [RFC 11/13] acpi/x86: s2idle: add quirk table for modern standby delays
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH 5/5] clk: imx: imx8mp: Prevent media clocks to be incompatibly changed
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 3/5] clk: Split clk_calc_subtree()
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 4/5] clk: Add flag to prevent frequency changes when walking subtrees
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 2/5] clk: Add a helper to determine a clock rate
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 1/5] clk: imx: clk-imx8mp: Allow LDB serializer clock reconfigure parent rate
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 0/5] clk: Fix simple video pipelines on i.MX8
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [RFC 00/13] acpi/x86: s2idle: implement Modern Standby transition states and expose to userspace
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH] drm/msm: UAPI error reporting
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: Merging the xe / ttm shrinker series?
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/sched: Extend and update documentation
  • From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
• Re: [PATCH v14 1/8] drm/ttm: Balance ttm_resource_cursor_init() and ttm_resource_cursor_fini()
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/4] drm: Minimum backlight overrides and implementation for amdgpu
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
  • From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
• Re: [PATCH] drm/amd/pm: Fix an error handling path in vega10_enable_se_edc_force_stall_config()
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [PATCH v6 0/7] Improve gpu_scheduler trace events + uAPI
  • From: Pierre-Eric Pelloux-Prayer <pierre-eric@xxxxxxxxx>
• Re: [git pull] drm for 6.13-rc1
  • From: Uros Bizjak <ubizjak@xxxxxxxxx>
• Re: [PATCH 00/37] drm/vc4: Add support for BCM2712 / Pi5 display hardware
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 4/7] drm/sched: cleanup gpu_scheduler trace events
  • From: Pierre-Eric Pelloux-Prayer <pierre-eric@xxxxxxxxx>
• Re: [PATCH v6 4/7] drm/sched: cleanup gpu_scheduler trace events
  • From: Pierre-Eric Pelloux-Prayer <pierre-eric@xxxxxxxxx>
• Re: [PATCH v6 3/7] drm/sched: add device name to the drm_sched_process_job event
  • From: Pierre-Eric Pelloux-Prayer <pierre-eric@xxxxxxxxx>
• [PATCHv6 7/8] drm/i915/histogram: Histogram changes for Display 20+
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv3 6/8] drm/i915/histogram: histogram delay counter doesnt reset
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv5 2/8] drm/i915/histogram: Add support for histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• RE: [PATCHv6 7/8] drm/i915/histogram: Histogram changes for Display 20+
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• RE: [PATCHv5 2/8] drm/i915/histogram: Add support for histogram
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• RE: [PATCH 0/8] Display Global Histogram
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• RE: [PATCHv2 6/8] drm/i915/histogram: histogram delay counter doesnt reset
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCHv6 7/8] drm/i915/histogram: Histogram changes for Display 20+
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• RE: [PATCHv5 2/8] drm/i915/histogram: Add support for histogram
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH 0/8] Display Global Histogram
  • From: Daniel Stone <daniel@xxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] misc: fastrpc: Add debugfs support for fastrpc
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL] drm-misc-fixes
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 3/3] i2c: i2c-qcom-geni: Update compile dependenices for I2C GENI driver
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v3 2/3] i2c: i2c-qcom-geni: Add Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v3 1/3] dmaengine: qcom: gpi: Add GPI Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v3 0/3] Add Block event interrupt support for I2C protocol
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v2 RESEND 3/3] i2c: i2c-qcom-geni: Add Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v2 RESEND 1/3] dmaengine: qcom: gpi: Add GPI Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v2 RESEND 2/3] i2c: qcom_geni: Update compile dependenices for qcom geni
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v2 RESEND 1/3] dmaengine: qcom: gpi: Add GPI Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH 0/2] drm/cirrus: Don't pretend to operate hardware
  • From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
• [PATCH 8/8] drm/i915/histogram: Enable pipe dithering
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv6 7/8] drm/i915/histogram: Histogram changes for Display 20+
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv2 6/8] drm/i915/histogram: histogram delay counter doesnt reset
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv6 5/8] drm/i915/histogram: Add crtc properties for global histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv5 4/8] drm/i915/histogram: histogram interrupt handling
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCH 3/8] drm/xe: Add histogram support to Xe builds
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv5 2/8] drm/i915/histogram: Add support for histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv2 1/8] drm/i915/histogram: Define registers for histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCH 0/8] Display Global Histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• RE: [PATCH 8/8] drm/i915/histogram: Enable pipe dithering
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• RE: [PATCHv4 7/8] drm/i915/histogram: Histogram changes for Display 20+
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• RE: [PATCH 6/8] drm/i915/histogram: histogram delay counter doesnt reset
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 0/8] Add GCE support for MT8196
  • From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
• Re: [PATCH] drm/sti: Add __iomem for mixer_dbg_mxn's parameter
  • From: Raphaël Gallais-Pou <rgallaispou@xxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
  • From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
• Re: [PATCH 4/8] soc: mediatek: mtk-cmdq: Add unsupported subsys ID programing flow
  • From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
• [PATCH 4/4] drm/ttm: remove ttm_execbug_util
  • From: "Christian König" <ckoenig.leichtzumerken@xxxxxxxxx>
• [PATCH 1/4] drm/vmwgfx: start to phase out ttm_exec v2
  • From: "Christian König" <ckoenig.leichtzumerken@xxxxxxxxx>
• [PATCH 3/4] drm/vmwgfx: replace ttm_validate_buffer with separate struct
  • From: "Christian König" <ckoenig.leichtzumerken@xxxxxxxxx>
• [PATCH 2/4] drm/vmwgfx: use the new drm_exec object v2
  • From: "Christian König" <ckoenig.leichtzumerken@xxxxxxxxx>
• Phase out ttm_exec
  • From: "Christian König" <ckoenig.leichtzumerken@xxxxxxxxx>
• Re: [RFC PATCH 01/29] dma-fence: Add dma_fence_preempt base class
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCH v5 1/9] dt-bindings: display: bindings for starfive, JH7110 display pipeline
  • From: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/etnaviv: Add fdinfo support for memory stats
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxx>
• Re: [PATCH] drm/vmwgfx: Add Fake EDID
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 02/29] dma-fence: Add dma_fence_user_fence
  • From: Christian König <christian.koenig@xxxxxxx>
• [PATCH] drm/etnaviv: Add fdinfo support for memory stats
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• [PATCH 3/3] drm: atmel-hlcdc: set LVDS PLL clock rate for LVDS Displays
  • From: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
• [PATCH 2/3] mfd: atmel-hlcdc: fetch LVDS PLL clock for LVDS display
  • From: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
• [PATCH 1/3] drm: atmel-hlcdc: add support for LVDS encoder type
  • From: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/sched: add WARN_ON and BUG_ON to drm_sched_fini
  • From: Philipp Stanner <pstanner@xxxxxxxxxx>
• Re: [PATCH 0/8] Add GCE support for MT8196
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v4 2/2] misc: fastrpc: Rename tgid and pid to client_id
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v4 1/2] misc: fastrpc: Add support for multiple PD from one process
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v4 0/2] Add changes to use session index as identifier
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 0/5] Improve Rockchip VOP2 display modes handling on RK3588 HDMI0
  • From: FUKAUMI Naoki <naoki@xxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Petr Vorel <pvorel@xxxxxxx>
• [PATCH v4 2/2] drm/msm: depend on python3
  • From: Petr Vorel <pvorel@xxxxxxx>
• [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Petr Vorel <pvorel@xxxxxxx>
• [git pull] drm for 6.13-rc1
  • From: Dave Airlie <airlied@xxxxxxxxx>
• Re: [PATCH v1 1/6] dt-bindings: display: mediatek: dpi: Add MT8195 and MT8188 compat
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PULL] drm-intel-next-fixes
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxx>
• Re: [PATCH 0/2] drm/cirrus: Don't pretend to operate hardware
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH] drm/bochs: Replace deprecated PCI implicit devres
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v5 1/9] dt-bindings: display: bindings for starfive,JH7110 display pipeline
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCH] drm: renesas: rz-du: Increase supported resolutions
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCHv5 5/8] drm/i915/histogram: Add crtc properties for global histogram
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• RE: [PATCHv4 2/8] drm/i915/histogram: Add support for histogram
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• Re: [PATCH 4/8] soc: mediatek: mtk-cmdq: Add unsupported subsys ID programing flow
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v1 4/4] misc: fastrpc: Add debugfs support for fastrpc
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH 4/8] soc: mediatek: mtk-cmdq: Add unsupported subsys ID programing flow
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v1 3/4] misc: fastrpc: Introduce fastrpc_shared.h header
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v1 2/4] misc: fastrpc: Rename fastrpc.c to fastrpc_main.c
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 2/8] dt-bindings: mailbox: mediatek: Add MT8196 support for gce-mailbox
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 4/8] soc: mediatek: mtk-cmdq: Add unsupported subsys ID programing flow
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 0/8] Add GCE support for MT8196
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 6/8] soc: mediatek: Add pa_base due to CMDQ API change
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 8/8] media: mediatek: mdp3: Add pa_base due to CMDQ API change
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 3/8] mailbox: mtk-cmdq: Add driver data to support for MT8196
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 5/8] soc: mediatek: mtk-cmdq: Add mminfra_offset compatibility for DRAM address
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 7/8] drm/mediatek: Add pa_base due to CMDQ API change
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• Re: [PATCH 1/2] clk: imx: clk-imx8mp: Allow LDB serializer clock reconfigure parent rate
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2] mediatek: dsi: Correct calculation formula of PHY Timing
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• RE: [PATCHv4 4/8] drm/i915/histogram: histogram interrupt handling
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• RE: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• RE: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH] nouveau/gsp: drop WARN_ON in ACPI probes
  • From: Dave Airlie <airlied@xxxxxxxxx>
• Re: [PATCH] drm/bridge: Constify struct i2c_device_id
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [RFC PATCH 02/29] dma-fence: Add dma_fence_user_fence
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH v2 2/2] drm/msm: require python3 and xml.parsers.expat module
  • From: Petr Vorel <pvorel@xxxxxxx>
• [PATCH v3 2/2] drm/msm: require python3
  • From: Petr Vorel <pvorel@xxxxxxx>
• Re: [PATCH drm-next] drm/msm/dp: Fix potential division by zero issue
  • From: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@xxxxxxxxx>
• [PATCH 1/1] Remove hard-coded strings by using the helper functions str_true_false()
  • From: Paolo Perego <pperego@xxxxxxx>
• [PATCH 0/1] Removed hard-coded string by using the str_true_false() helper
  • From: Paolo Perego <pperego@xxxxxxx>
• [PATCH v2] staging:fbtft: Using str_true_false() helper instead of hardcoded strings
  • From: Paolo Perego <pperego@xxxxxxx>
• [PATCH v3 1/2] init/Kconfig: add python3 availability check
  • From: Petr Vorel <pvorel@xxxxxxx>
• [PATCH v2 1/2] init/Kconfig: add python3 availability check
  • From: Petr Vorel <pvorel@xxxxxxx>
• [RFC][PATCH 1/1] drm/msm: require python3 and xml.parsers.expat module
  • From: Petr Vorel <pvorel@xxxxxxx>
• Re: [RFC][PATCH 1/1] drm/msm: require python3 and xml.parsers.expat module
  • From: Petr Vorel <pvorel@xxxxxxx>
• [PATCH] drm: renesas: rz-du: Increase supported resolutions
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• Re: [PATCH] drm/vmwgfx: Add Fake EDID
  • From: Ian Forbes <ian.forbes@xxxxxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [RFC][PATCH 1/1] drm/msm: require python3 and xml.parsers.expat module
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [RFC PATCH 01/29] dma-fence: Add dma_fence_preempt base class
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v5 2/9] riscv: dts: Add display property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] drm: renesas: rz-du: Increase supported resolutions
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH 1/3] drm/dp: extract drm_dp_dpcd_poll_act_handled()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH 3/3] drm/dp: extract drm_dp_dpcd_clear_payload()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH 2/3] drm/dp: extract drm_dp_dpcd_write_payload()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH 1/3] drm/dp: extract drm_dp_dpcd_poll_act_handled()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH] drm/bochs: Replace deprecated PCI implicit devres
  • From: Philipp Stanner <pstanner@xxxxxxxxxx>
• Re: [PATCH v1 2/7] dt-bindings: display: mediatek: Add binding for MT8195 HDMI-TX v2
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 09/10] drm/xe: Restore system memory GGTT mappings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [RFC PATCH 02/29] dma-fence: Add dma_fence_user_fence
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [RFC PATCH 01/29] dma-fence: Add dma_fence_preempt base class
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH] drm/vmwgfx: Add Fake EDID
  • From: Zack Rusin <zack.rusin@xxxxxxxxxxxx>
• [PATCH v1 6/7] drm/mediatek: mtk_hdmi: Split driver and add common probe function
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 4/7] drm/mediatek: mtk_hdmi_ddc: Switch to register as module_platform_driver
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 5/7] drm/mediatek: hdmi: Use regmap instead of iomem for main registers
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 7/7] drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 3/7] drm/mediatek: mtk_cec: Switch to register as module_platform_driver
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 2/7] dt-bindings: display: mediatek: Add binding for MT8195 HDMI-TX v2
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 1/7] dt-bindings: display: mediatek: Add binding for HDMIv2 DDC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 0/7] drm/mediatek: Add support for HDMIv2 and DDCv2 IPs
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 6/6] drm/mediatek: Add support for MT8195 Digital Parallel Interface
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 5/6] drm/mediatek: mtk_dpi: Add checks for reg_h_fre_con existence
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 3/6] drm/mediatek: mtk_dpi: Use an array for pixclk factor calculation
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 4/6] drm/mediatek: mtk_dpi: Move pixel clock setting flow to function
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 1/6] dt-bindings: display: mediatek: dpi: Add MT8195 and MT8188 compat
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 2/6] drm/mediatek: mtk_dpi: Add support for Pattern Generator in debugfs
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 0/6] drm/mediatek: dpi: Add support for MT8195/8188 and Pattern Generator
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH] phy: mediatek: phy-mtk-hdmi: Register PHY provided regulator
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 10/11] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH drm-next] drm/msm/dp: Fix potential division by zero issue
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/1] Remove hard-coded strings by using the helper functions str_true_false()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] drm/panthor: Coherency related fixes
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• Re: [PATCH] drm/panthor: Fix compilation failure on panthor_fw.c
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• Re: [PATCH v2 11/11] arm64: qcom: dts: sm8650: add interconnect and opp-peak-kBps for GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 10/11] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 09/11] drm/msm: adreno: enable GMU bandwidth for A740 and A750
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 07/11] drm/msm: adreno: find bandwidth index of OPP and set it along freq index
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/panthor: Fix compilation failure on panthor_fw.c
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH] drm/panthor: Fix compilation failure on panthor_fw.c
  • From: Karunika Choo <karunika.choo@xxxxxxx>
• Re: [PATCH 1/1] Remove hard-coded strings by using the helper functions str_true_false()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v14 2/8] drm/ttm: Provide a shmem backup implementation
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v14 2/8] drm/ttm: Provide a shmem backup implementation
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH drm-next] drm/msm/dp: Fix potential division by zero issue
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v14 1/8] drm/ttm: Balance ttm_resource_cursor_init() and ttm_resource_cursor_fini()
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v14 2/8] drm/ttm: Provide a shmem backup implementation
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v14 2/8] drm/ttm: Provide a shmem backup implementation
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• RE: [PATCHv4 7/8] drm/i915/histogram: Histogram changes for Display 20+
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH] drm/vmwgfx: Add Fake EDID
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/vkms: Remove index parameter from init_vkms_output
  • From: Maíra Canal <mcanal@xxxxxxxxxx>
• Re: [PATCH 0/3] drm/rockchip: Add driver for the new DSI2 controller
  • From: Daniel Semkowicz <dse@xxxxxxxxxxxxx>
• Re: [PATCH] drm/vmwgfx: Add Fake EDID
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v14 2/8] drm/ttm: Provide a shmem backup implementation
  • From: Christian König <christian.koenig@xxxxxxx>
• RE: [PATCH 8/8] drm/i915/histogram: Enable pipe dithering
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• [no subject]
  • From: Unknown
• RE: [PATCH 6/8] drm/i915/histogram: histogram delay counter doesnt reset
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH v2 19/21] livepatch: Convert timeouts to secs_to_jiffies()
  • From: Miroslav Benes <mbenes@xxxxxxx>
• [PATCH] drm/sti: Add __iomem for mixer_dbg_mxn's parameter
  • From: Pei Xiao <xiaopei01@xxxxxxxxxx>
• [PATCH drm-next] drm/msm/dp: Fix potential division by zero issue
  • From: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@xxxxxxxxx>
• Re: [PATCH v2 1/2] drm/msm/dpu1: don't choke on disabling the writeback connector
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 21/21] arm64: dts: ti: k3-j721s2: Add GPU node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCHv5 5/8] drm/i915/histogram: Add crtc properties for global histogram
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [v2,1/2] drm/msm/dpu1: don't choke on disabling the writeback connector
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 07/21] arm64: dts: ti: k3-am62: New GPU binding details
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 05/21] drm/imagination: Use more specific compatible strings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 08/21] dt-bindings: gpu: img: Add BXS-4-64 devicetree bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 04/21] dt-bindings: gpu: img: Allow dma-coherent
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 03/21] dt-bindings: gpu: img: Power domain details
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 02/21] dt-bindings: gpu: img: Further constrain clocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 01/21] dt-bindings: gpu: img: More explicit compatible strings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCHv4 2/8] drm/i915/histogram: Add support for histogram
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH v2 16/29] drm/xe: Add migrate layer functions for SVM support
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v14 2/8] drm/ttm: Provide a shmem backup implementation
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v9 3/4] drm/xe: Use device wedged event
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• RE: [PATCHv2 1/8] drm/i915/histogram: Define registers for histogram
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
  • From: Ying Liu <victor.liu@xxxxxxx>
• Re: [PATCH v1 03/10] media: platform: mediatek: add isp_7x seninf unit
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• [PATCH v5 7/9] drm/vs: Add VS Plane API
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• [PATCH v5 9/9] drm/vs: Add VS DRM Master Driver for JH7110 SoC
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• [PATCH v5 8/9] drm/vs: Add Innosilicon HDMI Support
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• [PATCH v5 2/9] riscv: dts: Add display property
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• [PATCH v5 1/9] dt-bindings: display: bindings for starfive, JH7110 display pipeline
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• [PATCH v5 6/9] drm/vs: Add CRTC Functions
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• [PATCH v5 4/9] drm/vs: Add Hardware Functions for VS DC8200
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• [PATCH v5 5/9] drm/vs: Add Base API for VS Mode Configuration
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• [PATCH v5 0/9] drm/verisilicon : support DC8200 and inno hdmi
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 05/10] media: platform: mediatek: add isp_7x camsys unit
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• [PATCH 4/5] drm/i915/display: Add registers and compute the strength
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• [PATCH 5/5] drm/i915/display: Load the lut values and enable sharpness
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• [PATCH 3/5] drm/i915/display: Enable the second scaler for sharpness
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• [PATCH 2/5] drm/i915/display: Compute the scaler filter coefficients
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• [PATCH 1/5] drm: Introduce sharpness strength property
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• [PATCH 0/5] Introduce drm sharpness property
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• RE: [PATCH v2 2/5] drm/virtio: Add a helper to map and note the dma addrs and lengths
  • From: "Kasireddy, Vivek" <vivek.kasireddy@xxxxxxxxx>
• Re: [PATCH v2 17/29] drm/xe: Add SVM device memory mirroring
  • From: Gwan-gyeong Mun <gwan-gyeong.mun@xxxxxxxxx>
• Re: [v2,1/2] drm/msm/dpu1: don't choke on disabling the writeback connector
  • From: Leonard Lausen <leonard@xxxxxxxxx>
• Re: [PATCH v2 05/29] drm/gpusvm: Add support for GPU Shared Virtual Memory
  • From: Gwan-gyeong Mun <gwan-gyeong.mun@xxxxxxxxx>
• Re: linux-next: build failure after merge of the random tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v4 15/18] dt-bindings: usb: Add ports to google,cros-ec-typec for DP altmode
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v1 07/10] media: platform: mediatek: add isp_7x video ops
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v2 13/29] drm/xe: Add unbind to SVM garbage collector
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v2 14/29] drm/xe: Do not allow system allocator VMA unbind if the GPU has bindings
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v2 16/29] drm/xe: Add migrate layer functions for SVM support
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PULL] drm-misc-next
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PATCH 2/2] nouveau/dp: handle retries for AUX CH transfers with GSP.
  • From: Ben Skeggs <bskeggs@xxxxxxxxxx>
• [PATCH] drm/amdgpu: Fix an error handling path in amdgpu_device_xgmi_reset_func()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] drm/amd/pm: Fix an error handling path in vega10_enable_se_edc_force_stall_config()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 19/21] drm/imagination: Add device_memory_force_cpu_cached override
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH v2 2/3] drm/vmwgfx: Support hw_destroy for userspace managed surfaces
  • From: Zack Rusin <zack.rusin@xxxxxxxxxxxx>
• [PATCH] drm/vmwgfx: Add Fake EDID
  • From: Ian Forbes <ian.forbes@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] drm/vmwgfx: Introduce userspace managed surfaces
  • From: Zack Rusin <zack.rusin@xxxxxxxxxxxx>
• [PATCH v7 3/3] drm: adv7511: Drop dsi single lane support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v7 2/3] dt-bindings: display: adi, adv7533: Drop single lane support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v7 0/3] drm: adv7511: ADV7535 fixes
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v7 1/3] drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v6 1/3] drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v6 1/3] drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v6 3/3] drm: adv7511: Drop dsi single lane support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v6 1/3] drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v6 2/3] dt-bindings: display: adi, adv7533: Drop single lane support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v6 0/3] drm: adv7511: ADV7535 fixes
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v5 1/3] drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 08/11] drm/msm: adreno: request for maximum bus bandwidth usage
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 09/11] drm/msm: adreno: enable GMU bandwidth for A740 and A750
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 00/11] drm/msm: adreno: add support for DDR bandwidth scaling via GMU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 11/11] arm64: qcom: dts: sm8650: add interconnect and opp-peak-kBps for GPU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 10/11] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 07/11] drm/msm: adreno: find bandwidth index of OPP and set it along freq index
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 06/11] drm/msm: adreno: dynamically generate GMU bw table
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 02/11] drm/msm: adreno: rename quirks that are features
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 01/11] opp: core: implement dev_pm_opp_get_bw
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: display: vop2: Add optional PLL clock properties
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 18/29] drm/xe: Add drm_gpusvm_devmem to xe_bo
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 17/29] drm/xe: Add SVM device memory mirroring
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 16/29] drm/xe: Add migrate layer functions for SVM support
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• [PATCH] drm/panthor: Fix compilation failure on panthor_fw.c
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• Re: [PATCH v2] drm/panthor: Simplify FW fast reset path
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• Re: [PULL] drm-misc-next
  • From: Liviu Dudau <liviu@xxxxxxxxxxx>
• [PATCH v2] drm/mediatek: Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• Re: [PATCH v2 15/29] drm/xe: Enable system allocator uAPI
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 14/29] drm/xe: Do not allow system allocator VMA unbind if the GPU has bindings
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] drm/msm/adreno: Setup SMMU aparture for per-process page table
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/29] drm/gpuvm: Add DRM_GPUVA_OP_USER
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v2 08/29] drm/xe: Add dma_addr res cursor
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v2 07/29] drm/xe: Add SVM init / close / fini to faulting VMs
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v6 2/7] drm/sched: store the drm client_id in drm_sched_fence
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxx>
• Re: [PATCH v2 06/29] drm/xe/uapi: Add DRM_XE_VM_BIND_FLAG_SYSTEM_ALLOCATON flag
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH 2/2] drm/sched: Fix docu of drm_sched_entity_flush()
  • From: Philipp Stanner <pstanner@xxxxxxxxxx>
• Re: [PATCH v2 13/29] drm/xe: Add unbind to SVM garbage collector
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 0/8] Display Global Histogram
  • From: Daniel Stone <daniel@xxxxxxxxxxxxx>
• Re: [v2,1/2] drm/msm/dpu1: don't choke on disabling the writeback connector
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v13 5/9] drm/vkms: Update pixels accessor to support packed and multi-plane formats.
  • From: José Expósito <jose.exposito89@xxxxxxxxx>
• Re: [PATCH v3] drm/vkms: Remove index parameter from init_vkms_output
  • From: José Expósito <jose.exposito89@xxxxxxxxx>
• Re: [PATCH v2 12/29] drm/xe: Add SVM garbage collector
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [v2,1/2] drm/msm/dpu1: don't choke on disabling the writeback connector
  • From: Leonard Lausen <leonard@xxxxxxxxx>
• RE: [PATCHv5 0/8] Display Global Histogram
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• Re: [PATCH 2/2] drm/sched: Fix docu of drm_sched_entity_flush()
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v2 11/29] drm/xe: Add (re)bind to SVM page fault handler
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/panthor: Simplify FW fast reset path
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• [PATCH v3 10/10] drm/xe/nvm: add support for access mode
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v3 09/10] drm/xe/nvm: add on-die non-volatile memory device
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v3 08/10] drm/i915/nvm: add support for access mode
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v3 07/10] drm/i915/nvm: add nvm device for discrete graphics
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v3 06/10] mtd: intel-dg: wake card on operations
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v3 05/10] mtd: intel-dg: align 64bit read and write
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v3 04/10] mtd: intel-dg: register with mtd
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v3 03/10] mtd: intel-dg: implement access functions
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v3 02/10] mtd: intel-dg: implement region enumeration
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v3 01/10] mtd: add driver for intel graphics non-volatile memory device
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v3 00/10] mtd: add driver for Intel discrete graphics
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• Re: [PATCH v5 3/3] drm: adv7511: Drop dsi single lane support
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2 10/29] drm/gpuvm: Add DRM_GPUVA_OP_USER
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/vkms: Remove index parameter from init_vkms_output
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• Re: [PATCH v2 09/29] drm/xe: Add SVM range invalidation
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/7] drm/sched: store the drm client_id in drm_sched_fence
  • From: Pierre-Eric Pelloux-Prayer <pierre-eric@xxxxxxxxx>
• Re: [PATCH v6 2/7] drm/sched: store the drm client_id in drm_sched_fence
  • From: Pierre-Eric Pelloux-Prayer <pierre-eric@xxxxxxxxx>
• Re: [v2,1/2] drm/msm/dpu1: don't choke on disabling the writeback connector
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v2] drm/panthor: Simplify FW fast reset path
  • From: Karunika Choo <karunika.choo@xxxxxxx>
• Re: [PATCH v6 2/7] drm/sched: store the drm client_id in drm_sched_fence
  • From: Pierre-Eric Pelloux-Prayer <pierre-eric@xxxxxxxxx>
• Re: [PATCH 1/2] drm/sched: Fix drm_sched_entity_flush() return val
  • From: Philipp Stanner <pstanner@xxxxxxxxxx>
• [PATCH 2/2] drm/sched: Fix docu of drm_sched_entity_flush()
  • From: Philipp Stanner <pstanner@xxxxxxxxxx>
• [PATCH 1/2] drm/sched: Fix drm_sched_entity_flush() return val
  • From: Philipp Stanner <pstanner@xxxxxxxxxx>
• Re: [PATCH v14 2/8] drm/ttm: Provide a shmem backup implementation
  • From: Christian König <christian.koenig@xxxxxxx>
• [PATCH v3] drm/vkms: Remove index parameter from init_vkms_output
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v5 3/3] drm: adv7511: Drop dsi single lane support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 2/3] dt-bindings: display: adi, adv7533: Drop single lane support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 1/3] drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 0/3] drm: adv7511: ADV7535 fixes
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: Merging the xe / ttm shrinker series?
  • From: Christian König <christian.koenig@xxxxxxx>
• RE: [RFC PATCH 13/29] drm/xe/mmap: Add mmap support for PCI memory barrier
  • From: "Mrozek, Michal" <michal.mrozek@xxxxxxxxx>
• Re: [PATCHv5 0/8] Display Global Histogram
  • From: Daniel Stone <daniel@xxxxxxxxxxxxx>
• Re: [PATCH v2 08/29] drm/xe: Add dma_addr res cursor
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 07/29] drm/xe: Add SVM init / close / fini to faulting VMs
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 13/29] drm/xe/mmap: Add mmap support for PCI memory barrier
  • From: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
• Re: [PATCHv5 5/8] drm/i915/histogram: Add crtc properties for global histogram
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCHv4 4/8] drm/i915/histogram: histogram interrupt handling
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: Merging the xe / ttm shrinker series?
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• [PATCHv4 7/8] drm/i915/histogram: Histogram changes for Display 20+
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCH 8/8] drm/i915/histogram: Enable pipe dithering
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv5 5/8] drm/i915/histogram: Add crtc properties for global histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCH 6/8] drm/i915/histogram: histogram delay counter doesnt reset
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv4 4/8] drm/i915/histogram: histogram interrupt handling
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCH 3/8] drm/xe: Add histogram support to Xe builds
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv4 2/8] drm/i915/histogram: Add support for histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv2 1/8] drm/i915/histogram: Define registers for histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv5 0/8] Display Global Histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• Re: [PATCH v4] drm/virtio: Add drm_panic support
  • From: Jocelyn Falempe <jfalempe@xxxxxxxxxx>
• Re: [PATCH v2 2/5] drm/virtio: Add a helper to map and note the dma addrs and lengths
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] drm/virtio: Use drm_gem_plane_helper_prepare_fb()
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH v1] drm/virtio: Don't create a context with default param if context_init is supported
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH v2 RESEND] drm/virtio: use generic dumb_map_offset implementation
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [RFC PATCH 13/29] drm/xe/mmap: Add mmap support for PCI memory barrier
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v2] drm/i2c: tda9950: Constify struct i2c_device_id
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• RE: [PATCH v4 1/3] drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/panthor: Simplify FW fast reset path
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v2 19/21] livepatch: Convert timeouts to secs_to_jiffies()
  • From: Petr Mladek <pmladek@xxxxxxxx>
• Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• RE: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
  • From: Ying Liu <victor.liu@xxxxxxx>
• [PATCH v2] drm/bridge: adv7533: Reset DSI receiver logic
  • From: Stefan Ekenberg <stefan.ekenberg@xxxxxxxx>
• [PATCH v4] drm/bridge: adv7511_audio: Update Audio InfoFrame properly
  • From: Stefan Ekenberg <stefan.ekenberg@xxxxxxxx>
• Re: [PATCH v2 19/21] livepatch: Convert timeouts to secs_to_jiffies()
  • From: zhang warden <zhangwarden@xxxxxxxxx>
• Re: [PATCH] drm/mediatek: Add no pending_planes flag checking for mtk_crtc_finish_page_flip()
  • From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
• [PATCH v3 2/5] drm/virtio: Add a helper to map and note the dma addrs and lengths
  • From: Vivek Kasireddy <vivek.kasireddy@xxxxxxxxx>
• [PATCH v3 3/5] drm/virtio: Add helpers to initialize and free the imported object
  • From: Vivek Kasireddy <vivek.kasireddy@xxxxxxxxx>
• [PATCH v3 4/5] drm/virtio: Import prime buffers from other devices as guest blobs
  • From: Vivek Kasireddy <vivek.kasireddy@xxxxxxxxx>
• [PATCH v3 1/5] drm/virtio: Implement VIRTIO_GPU_CMD_RESOURCE_DETACH_BACKING cmd
  • From: Vivek Kasireddy <vivek.kasireddy@xxxxxxxxx>
• [PATCH v3 5/5] drm/virtio: Add prepare and cleanup routines for imported dmabuf obj
  • From: Vivek Kasireddy <vivek.kasireddy@xxxxxxxxx>
• [PATCH v3 0/5] drm/virtio: Import scanout buffers from other devices
  • From: Vivek Kasireddy <vivek.kasireddy@xxxxxxxxx>
• RE: [PATCH v2 2/5] drm/virtio: Add a helper to map and note the dma addrs and lengths
  • From: "Kasireddy, Vivek" <vivek.kasireddy@xxxxxxxxx>
• Re: [PATCH v1 05/10] media: platform: mediatek: add isp_7x camsys unit
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v9 3/4] drm/xe: Use device wedged event
  • From: "Ghimiray, Himal Prasad" <himal.prasad.ghimiray@xxxxxxxxx>
• Re: [PATCH v9 4/4] drm/i915: Use device wedged event
  • From: Aravind Iddamsetty <aravind.iddamsetty@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 3/4] drm/xe: Use device wedged event
  • From: Aravind Iddamsetty <aravind.iddamsetty@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 03/13] drm/bridge: fsl-ldb: Use clk_round_rate() to validate "ldb" clock rate
  • From: Liu Ying <victor.liu@xxxxxxx>
• Re: [PATCH 1/2] clk: imx: clk-imx8mp: Allow LDB serializer clock reconfigure parent rate
  • From: Liu Ying <victor.liu@xxxxxxx>
• Re: [PATCH v1 03/10] media: platform: mediatek: add isp_7x seninf unit
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v1 03/10] media: platform: mediatek: add isp_7x seninf unit
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
  • From: Marek Vasut <marex@xxxxxxx>
• [Bug 219507] nouveau: GeForce GT 710: irq 166 handler nvkm_intr+0x0/0x1b3 [nouveau] enabled interrupts
  • From: bugzilla-daemon@xxxxxxxxxx
• [RFC PATCH 26/29] drm/xe: Always wait on preempt fences in vma_check_userptr
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 23/29] drm/xe: Add user fence IRQ handler
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 19/29] drm/xe: Do not allow usermap exec queues in exec IOCTL
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 25/29] drm/xe: Add a message lock to the Xe GPU scheduler
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 28/29] drm/xe: Add VM convert fence IOCTL
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 27/29] drm/xe: Teach xe_sync layer about drm_xe_semaphore
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 12/29] drm/xe: Add exec queue post init extension processing
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 21/29] drm/xe: Enable preempt fences on usermap queues
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 15/29] drm/xe: Add support for mmapping submission ring and indirect ring state to user space
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 29/29] drm/xe: Add user fence TDR
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 16/29] drm/xe/uapi: Define UMD exec queue mapping uAPI
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 10/29] drm/xe: Enable indirect ring on media GT
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 24/29] drm/xe: Add xe_hw_fence_user_init
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 14/29] drm/xe: Add support for mmapping doorbells to user space
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 18/29] drm/xe: Drop EXEC_QUEUE_FLAG_UMD_SUBMISSION flag
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 22/29] drm/xe/uapi: Add uAPI to convert user semaphore to / from drm syncobj
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 20/29] drm/xe: Teach GuC backend to kill usermap queues
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 06/29] drm/xe: Break submission ring out into its own BO
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 09/29] FIXME: drm/xe: Add pad to ring and indirect state
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 11/29] drm/xe: Don't add pinned mappings to VM bulk move
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 13/29] drm/xe/mmap: Add mmap support for PCI memory barrier
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 03/29] drm/xe: Use dma_fence_preempt base class
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 17/29] drm/xe: Add usermap exec queue extension
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 07/29] drm/xe: Break indirect ring state out into its own BO
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 08/29] drm/xe: Clear GGTT in xe_bo_restore_kernel
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 02/29] dma-fence: Add dma_fence_user_fence
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 05/29] drm/xe: Add doorbell ID to snapshot capture
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 04/29] drm/xe: Allocate doorbells for UMD exec queues
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 00/29] UMD direct submission in Xe
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [RFC PATCH 01/29] dma-fence: Add dma_fence_preempt base class
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v3] drm/v3d: Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• [PATCH] drm/v3d: Stop active perfmon if it is being destroyed
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• Re: [PATCH 5/5] drm/connector: make mode_valid accept const struct drm_display_mode
  • From: Raphaël Gallais-Pou <rgallaispou@xxxxxxxxx>
• Re: [PATCH 3/5] drm/sti: hda: pass const struct drm_display_mode* to hda_get_mode_idx()
  • From: Raphaël Gallais-Pou <rgallaispou@xxxxxxxxx>
• Re: [PATCH V11 00/10] AMD XDNA driver
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v13 0/7] drm/vkms: Add support for YUV and DRM_FORMAT_R*
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v13 3/7] drm/vkms: Drop YUV formats TODO
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v13 7/7] drm/vkms: Add support for DRM_FORMAT_R*
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v13 6/7] drm/vkms: Add how to run the Kunit tests
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v13 5/7] drm/vkms: Create KUnit tests for YUV conversions
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v13 2/7] drm/vkms: Add range and encoding properties to the plane
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v13 4/7] drm: Export symbols to use in tests
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v13 1/7] drm/vkms: Add YUV support
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v13 0/7] drm/vkms: Add support for YUV and DRM_FORMAT_R*
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 8/9] drm/vkms: Re-introduce line-per-line composition algorithm
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 7/9] drm/vkms: Introduce pixel_read_direction enum
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 9/9] drm/vkms: Remove useless drm_rotation_simplify
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 6/9] drm/vkms: Avoid computing blending limits inside pre_mul_alpha_blend
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 4/9] drm/vkms: Use const for input pointers in pixel_read an pixel_write functions
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 5/9] drm/vkms: Update pixels accessor to support packed and multi-plane formats.
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 2/9] drm/vkms: Use drm_frame directly
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 3/9] drm/vkms: Add typedef and documentation for pixel_read and pixel_write functions
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 1/9] drm/vkms: Code formatting
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH v14 0/9] drm/vkms: Reimplement line-per-line pixel conversion for plane reading
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• Re: [PATCH v2 19/21] livepatch: Convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/21] coccinelle: misc: Add secs_to_jiffies script
  • From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/21] netfilter: conntrack: Cleanup timeout definitions
  • From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/21] coccinelle: misc: Add secs_to_jiffies script
  • From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/21] Converge on using secs_to_jiffies()
  • From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] drm/dp: Add a way to init/add a connector in separate steps
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH] drm/panthor: Simplify FW fast reset path
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• Re: [PATCH v13 5/9] drm/vkms: Update pixels accessor to support packed and multi-plane formats.
  • From: Louis Chauvet <louis.chauvet@xxxxxxxxxxx>
• [PATCH V11 10/10] accel/amdxdna: Add query functions
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V11 09/10] accel/amdxdna: Add error handling
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V11 08/10] accel/amdxdna: Add suspend and resume
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V11 03/10] accel/amdxdna: Support hardware mailbox
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V11 05/10] accel/amdxdna: Add hardware context
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V11 06/10] accel/amdxdna: Add GEM buffer object management
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V11 07/10] accel/amdxdna: Add command execution
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V11 04/10] accel/amdxdna: Add hardware resource solver
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V11 02/10] accel/amdxdna: Add a new driver for AMD AI Engine
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V11 01/10] accel/amdxdna: Add documentation for AMD NPU accelerator driver
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V11 00/10] AMD XDNA driver
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>