Linux Device Tree

• Thread Index

• Re: [PATCH net-next v6 6/7] net: stmmac: add support for RZ/N1 GMAC
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v6 3/7] net: stmmac: Make stmmac_xpcs_setup() generic to all PCS devices
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v6 2/7] net: stmmac: Add dedicated XPCS cleanup method
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: hwmon: Document adt7475 PWM initial duty cycle
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: iio: dac: fix ad3552r gain parameter names
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: dac: ad3552r: add support for ad3541r and ad3551r
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: dac: add ad35xxr single output variants
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 5/5] misc: add ge-addon-connector driver
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v9 2/5] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH RESEND v7 0/8] Add V4L2 M2M Driver for E5010 JPEG Encoder
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/8] [PATCH v7 0/8] Add V4L2 M2M Driver for E5010 JPEG Encoder
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, Misc, Pinctrl and Regulator due for the v6.10 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, Pinctrl and Regulator due for the v6.10 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: connector: add GE SUNH hotplug addon connector
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v4 10/11] can: lin: Support setting LIN mode
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 09/11] can: lin: Handle rx offload config frames
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: broadcom: Add support for BCM2712
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 3/4] mmc: sdhci-brcmstb: Add BCM2712 support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 2/4] dt-bindings: mmc: Add support for BCM2712 SD host controller
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 1/4] dt-bindings: arm: bcm: Add BCM2712 SoC support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 0/4] Add minimal boot support for Raspberry Pi 5
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v4 07/11] can: Add support for hexDEV serial LIN adapter hexLINSER
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 7/7] drm/panel: himax-hx83102: Support for IVO t109nw41 MIPI-DSI panel
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: arm: fsl: add imx-se-fw binding doc
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 04/11] tty: serdev: Add method to enable break flags
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 5/6] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 3/3] dt-bindings: iio: dac: fix ad3552r gain parameter names
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH 2/3] iio: dac: ad3552r: add support for ad3541r and ad3551r
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: dac: add ad35xxr single output variants
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v4 03/11] treewide, serdev: add flags argument to receive_buf()
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Add basic APR sound support for SC7280 SoC
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Add Bananapi R3 Mini
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 02/11] HID: hexLIN: Add support for USB LIN adapter
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 4/4] firmware: imx: add driver for NXP EdgeLock Enclave
  • From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
• [PATCH 3/4] arm64: dts: imx8ulp-evk: add nxp secure enclave firmware
  • From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
• [PATCH 2/4] dt-bindings: arm: fsl: add imx-se-fw binding doc
  • From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
• [PATCH 1/4] Documentation/firmware: add imx/se to other_interfaces
  • From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
• [PATCH 0/4] Communication Interface to NXP secure-enclave HW IP like Edgelock Enclave
  • From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
• Re: [PATCH v4 01/11] can: Add LIN bus as CAN abstraction
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: connector: add GE SUNH hotplug addon connector
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 11/13] mfd: pm8008: rework driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 2/2] ASoC: codecs: es8311: add everest es8311 codec support
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH 1/2] ASoC: es8311: dt-bindings: add everest es8311 codec
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH 0/2] ASoC: codecs: add support for everest-semi es8311 codec
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH 12/12] arm64: dts: qcom: sm8650: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 11/12] arm64: dts: qcom: sm8550: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 10/12] arm64: dts: qcom: sm8450: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 09/12] arm64: dts: qcom: sm8350: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 08/12] arm64: dts: qcom: sm8250: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 07/12] arm64: dts: qcom: sm8150: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 06/12] arm64: dts: qcom: sm6350: Update GPU thermal zone settings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 05/12] arm64: dts: qcom: sm6115: Update GPU thermal zone settings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 04/12] arm64: dts: qcom: sdm845: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 02/12] arm64: dts: qcom: sc8280xp: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 03/12] arm64: dts: qcom: sdm630: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 00/12] Adreno cooling, take 2
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 01/12] arm64: dts: qcom: sc8180x: Throttle the GPU when overheating
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 00/31] Clean up thermal zone polling-delay
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 2/2] Add dp PHY dt-bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 31/31] arm64: dts: qcom: sm8650-*: Remove thermal zone polling delays
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: arm: Remove obsolete RTSM DCSCB binding
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: mfd: syscon: Add more simple compatibles
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH DNM 2/2] arm64: dts: qcom: qcm6490-fairphone-fp5: Add DisplayPort sound support
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sc7280: Add APR nodes for sound
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 0/2] Add basic APR sound support for SC7280 SoC
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] HID: i2c-hid: elan: Add ili2900 timing
  • From: zhaoxiong lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 5/6] regulator: rtq2208: Fix LDO to be compatible with both fixed and adjustable vout
  • From: Alina Yu <alina_yu@xxxxxxxxxxx>
• [PATCH v3 4/6] regulator: rtq2208: Fix the BUCK ramp_delay range to maximum of 16mVstep/us
  • From: Alina Yu <alina_yu@xxxxxxxxxxx>
• [PATCH v3 2/6] regulator: rtq2208: Fix LDO vsel setting
  • From: Alina Yu <alina_yu@xxxxxxxxxxx>
• [PATCH v3 1/6] regulator: rtq2208: Fix invalid memory access when devm_of_regulator_put_matches is called
  • From: Alina Yu <alina_yu@xxxxxxxxxxx>
• [PATCH v3 6/6] regulator: dt-bindings: rtq2208: Add property to get ldo of RTQ2208 is adjustable or not
  • From: Alina Yu <alina_yu@xxxxxxxxxxx>
• [PATCH v3 3/6] regulator: rtq2208: Fix LDO discharge register
  • From: Alina Yu <alina_yu@xxxxxxxxxxx>
• [PATCH v3 0/6] Fix rtq2208 BUCK ramp_delay and LDO dvs setting
  • From: Alina Yu <alina_yu@xxxxxxxxxxx>
• [PATCH v2 31/31] arm64: dts: qcom: sm8650-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 30/31] arm64: dts: qcom: sm8550-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 29/31] arm64: dts: qcom: sm8450-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 28/31] arm64: dts: qcom: sm8350-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 27/31] arm64: dts: qcom: sm8250-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 26/31] arm64: dts: qcom: sm8150-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 25/31] arm64: dts: qcom: sm6375-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 24/31] arm64: dts: qcom: sm6350-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 23/31] arm64: dts: qcom: sm6125-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 22/31] arm64: dts: qcom: sm6115-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 21/31] arm64: dts: qcom: sdm845-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 20/31] arm64: dts: qcom: sdm660-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 19/31] arm64: dts: qcom: sc8280xp-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 18/31] arm64: dts: qcom: sc8180x-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 17/31] arm64: dts: qcom: sc7280-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 16/31] arm64: dts: qcom: sc7180-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 15/31] arm64: dts: qcom: sa8775p-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 14/31] arm64: dts: qcom: qcs404-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 13/31] arm64: dts: qcom: qcm2290-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 12/31] arm64: dts: qcom: pmx75: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 11/31] arm64: dts: qcom: pms405: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 10/31] arm64: dts: qcom: pm7550ba: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 08/31] arm64: dts: qcom: msm8996-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 09/31] arm64: dts: qcom: msm8998-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 07/31] arm64: dts: qcom: msm8976-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 05/31] arm64: dts: qcom: msm8939-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 06/31] arm64: dts: qcom: msm8953-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 04/31] arm64: dts: qcom: msm8916-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 03/31] arm64: dts: qcom: ipq9574-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 02/31] arm64: dts: qcom: ipq8074-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 01/31] arm64: dts: qcom: ipq6018-*: Remove thermal zone polling delays
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 00/31] Clean up thermal zone polling-delay
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: Add QCM6490 SHIFTphone 8
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v2 0/2] Add PHY-dp bindings
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v24 2/4] reset: npcm: register npcm8xx clock auxiliary bus device
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v24 2/4] reset: npcm: register npcm8xx clock auxiliary bus device
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
  • From: <Parthiban.Veerasooran@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: phy: Add Sophgo CV1800 USB phy
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] regulator: dt-bindings: pca9450: add PMIC_RST_B warm reset property
  • From: Fabio Aiuto <fabio.aiuto@xxxxxxxxxxx>
• [PATCH v2 0/2] Add PHY-dp bindings
  • From: Liankun Yang <liankun.yang@xxxxxxxxxxxx>
• [PATCH v2 2/2] Add dp PHY dt-bindings
  • From: Liankun Yang <liankun.yang@xxxxxxxxxxxx>
• [PATCH v2 1/2] Add write DP phyd register from parse dts
  • From: Liankun Yang <liankun.yang@xxxxxxxxxxxx>
• Re: [PATCH v2 5/5] misc: add ge-addon-connector driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] misc: add ge-addon-connector driver
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v2 5/5] misc: add ge-addon-connector driver
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v2 5/5] misc: add ge-addon-connector driver
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: connector: add GE SUNH hotplug addon connector
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v24 2/4] reset: npcm: register npcm8xx clock auxiliary bus device
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 5/5] misc: add ge-addon-connector driver
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH RFC 2/2] pmdomain: ti-sci: Support retaining PD boot time state
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v10 9/9] ARM: dts: turris-omnia: Add GPIO key node for front button
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v10 8/9] ARM: dts: turris-omnia: Add MCU system-controller node
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v10 1/9] dt-bindings: firmware: add cznic,turris-omnia-mcu binding
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v10 0/9] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 0/3] LoongArch: dts: Add more support device ndoes to Loongson-2K
  • From: Huacai Chen <chenhuacai@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: arm: mediatek: mmsys: Add OF graph support for board path
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v7 5/6] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: arm64: mediatek: add BananaPi R3 Mini
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: mediatek: Add mt7986 based Bananapi R3 Mini
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v3 0/2] Add Bananapi R3 Mini
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• Re: [PATCH v1 0/2] riscv: dts: starfive: Enable Bluetooth on JH7100 boards
  • From: Andreas Schwab <schwab@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: arm: mediatek: mmsys: Add OF graph support for board path
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v3 02/11] HID: hexLIN: Add support for USB LIN bus adapter
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: amlogic: a1: setup CPU power management
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: amlogic: a1: add new input clock 'sys_pll_div16' to clkc_periphs
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: amlogic: a1: declare cpu clock controller
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] arm64: dts: amlogic: a1: add new syspll_in input for clkc_pll controller
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 0/4] arm64: dts: amlogic: a1: Support CPU Power Management
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 7/7] clk: meson: a1: add Amlogic A1 CPU clock controller driver
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 6/7] dt-bindings: clock: meson: add A1 CPU clock controller bindings
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 5/7] clk: meson: a1: peripherals: support 'sys_pll_div16' clock as GEN input
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 0/7] clk: meson: introduce Amlogic A1 SoC Family CPU clock controller driver
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 4/7] dt-bindings: clock: meson: a1: peripherals: support sys_pll_div16 input
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 1/7] clk: meson: introduce 'INIT_ONCE' flag to eliminate init for enabled PLL
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 2/7] dt-bindings: clock: meson: a1: pll: introduce new syspll bindings
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 3/7] clk: meson: a1: pll: support 'syspll' general-purpose PLL for CPU clock
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/2] riscv: dts: starfive: Enable Bluetooth on JH7100 boards
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: connector: add GE SUNH hotplug addon connector
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH RESEND v7 2/8] media: imagination: Add E5010 JPEG Encoder driver
  • From: Devarsh Thakkar <devarsht@xxxxxx>
• [PATCH RESEND v7 1/8] media: dt-bindings: Add Imagination E5010 JPEG Encoder
  • From: Devarsh Thakkar <devarsht@xxxxxx>
• [PATCH RESEND v7 0/8] Add V4L2 M2M Driver for E5010 JPEG Encoder
  • From: Devarsh Thakkar <devarsht@xxxxxx>
• Re: [PATCH v2 5/5] misc: add ge-addon-connector driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/2] riscv: dts: starfive: Enable Bluetooth on JH7100 boards
  • From: Andreas Schwab <schwab@xxxxxxxxxxxxxx>
• [PATCH net-next v6 4/7] net: stmmac: introduce pcs_init/pcs_exit stmmac operations
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH net-next v6 3/7] net: stmmac: Make stmmac_xpcs_setup() generic to all PCS devices
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH net-next v6 2/7] net: stmmac: Add dedicated XPCS cleanup method
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH net-next v6 7/7] ARM: dts: r9a06g032: describe GMAC1
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH net-next v6 1/7] dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH net-next v6 6/7] net: stmmac: add support for RZ/N1 GMAC
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH net-next v6 0/7] net: stmmac: Add support for RZN1 GMAC devices
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH net-next v6 5/7] net: stmmac: dwmac-socfpga: use pcs_init/pcs_exit
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• Re: Hotplug hardware with (un)loadable DT overlays - unconference meeting notes
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v2 5/5] misc: add ge-addon-connector driver
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v2 2/5] drm/bridge: add bridge notifier to be notified of bridge addition and removal
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v2 4/5] drm/bridge: hotplug-bridge: add driver to support hot-pluggable DSI bridges
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: connector: add GE SUNH hotplug addon connector
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v2 0/5] Add support for GE SUNH hot-pluggable connector (was: "drm: add support for hot-pluggable bridges")
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v2 3/5] drm/encoder: add drm_encoder_cleanup_from()
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH RFT 0/7] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
• [PATCH 0/2] add AD8460 DAC driver
  • From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: add QCM6490 SHIFTphone 8
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v6 0/2] regulator: sun20i: Add Allwinner D1 LDOs driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RESEND v5 0/2] regulator: sun20i: Add Allwinner D1 LDOs driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 7/7] drm/panel: himax-hx83102: Support for IVO t109nw41 MIPI-DSI panel
  • From: cong yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v24 3/4] clk: npcm8xx: add clock controller
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v2 2/4] clk: imx: clk-audiomix: Add reset controller
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: hwmon: Document adt7475 PWM initial duty cycle
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 2/2] firmware: arm_scmi: mailbox: support P2A channel completion
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: firmware: arm,scmi: Support notification completion channel
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH v2 0/2] firmware: arm_scmi: add notification completion channel
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• Re: [PATCH 2/4] ASoC: dt-bindings: fsl,xcvr: Add two PLL clock sources
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxxxx>
• Re: [PATCH 1/4] ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxxxx>
• Re: [PATCH 2/4] ASoC: dt-bindings: fsl,xcvr: Add two PLL clock sources
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxxxx>
• [PATCH v24 2/4] reset: npcm: register npcm8xx clock auxiliary bus device
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v3 29/29] kselftest/riscv: kselftest for user mode cfi
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• Re: [PATCH v5 2/7] drm/panel: himax-hx83102: Break out as separate driver
  • From: cong yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v24 1/4] dt-bindings: reset: npcm: add clock properties
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v3 04/29] riscv: zicfilp / zicfiss in dt-bindings (extensions.yaml)
  • From: Deepak Gupta <debug@xxxxxxxxxxxx>
• Re: [PATCH 3/4] ASoC: fsl_xcvr: Support reparent pll clocks for phy_clk
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v21 27/39] ASoC: Introduce SND kcontrols to select sound card and PCM device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v4 7/9] riscv: vector: adjust minimum Vector requirement to ZVE32X
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RFC v3 2/7] dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v21 38/39] ASoC: qcom: Populate SoC components string
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v21 34/39] ALSA: usb-audio: Add USB offloading capable kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] clk: imx: clk-audiomix: Add reset controller
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH RFC v6 09/10] iio: adc: ad7380: add support for rolling average oversampling mode
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v21 26/39] ASoC: qcom: qdsp6: Add support to track available USB PCM devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v4 1/4] mips: bmips: rework and cache CBR addr handling
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v4 3/4] mips: bmips: setup: make CBR address configurable
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v21 22/39] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v21 09/39] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v4 4/4] mips: bmips: enable RAC on BMIPS4350
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v4 3/4] mips: bmips: setup: make CBR address configurable
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v4 2/4] dt-bindings: mips: brcm: Document brcm,bmips-cbr-reg property
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v4 1/4] mips: bmips: rework and cache CBR addr handling
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v4 0/4] mips: bmips: improve handling of RAC and CBR addr
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 04/29] riscv: zicfilp / zicfiss in dt-bindings (extensions.yaml)
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v8 1/3] dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM controller
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v21 38/39] ASoC: qcom: Populate SoC components string
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 34/39] ALSA: usb-audio: Add USB offloading capable kcontrol
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 27/39] ASoC: Introduce SND kcontrols to select sound card and PCM device
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 26/39] ASoC: qcom: qdsp6: Add support to track available USB PCM devices
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 22/39] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 09/39] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] kbuild: use $(src) instead of $(srctree)/$(src) for source directory
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH v24 4/4] dt-binding: clock: remove nuvoton npcm845-clk bindings
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v24 0/4] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v3 29/29] kselftest/riscv: kselftest for user mode cfi
  • From: Deepak Gupta <debug@xxxxxxxxxxxx>
• Re: [PATCH v3 01/29] riscv: envcfg save and restore on task switching
  • From: Deepak Gupta <debug@xxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: mfd: add schema for 8ulp AVD-SIM
  • From: Laurentiu Mihalcea <laurentiumihalcea111@xxxxxxxxx>
• Re: [PATCH v3 04/29] riscv: zicfilp / zicfiss in dt-bindings (extensions.yaml)
  • From: Deepak Gupta <debug@xxxxxxxxxxxx>
• [PATCH v7 2/8] media: imagination: Add E5010 JPEG Encoder driver
  • From: Devarsh Thakkar <devarsht@xxxxxx>
• [PATCH v7 0/8] [PATCH v7 0/8] Add V4L2 M2M Driver for E5010 JPEG Encoder
  • From: Devarsh Thakkar <devarsht@xxxxxx>
• [PATCH v7 1/8] media: dt-bindings: Add Imagination E5010 JPEG Encoder
  • From: Devarsh Thakkar <devarsht@xxxxxx>
• Re: [PATCH v12 2/6] PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path
  • From: Mayank Rana <quic_mrana@xxxxxxxxxxx>
• Re: [PATCH v3 29/29] kselftest/riscv: kselftest for user mode cfi
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: hwmon: Document adt7475 PWM initial duty cycle
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 04/29] riscv: zicfilp / zicfiss in dt-bindings (extensions.yaml)
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 06/11] dt-bindings: net/can: Add serial LIN adapter hexLINSER
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: pwm: renesas,tpu: Do not require pwm-cells twice
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: mips: Document mti,mips-cm
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: spi: cadence: Add MRVL overlay bindings documentation for Cadence XSPI
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v4 11/11] HID: hexLIN: Implement ability to update lin mode
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v4 08/11] can: bcm: Add LIN answer offloading for responder mode
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v4 06/11] dt-bindings: net/can: Add serial LIN adapter hexLINSER
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v4 07/11] can: Add support for hexDEV serial LIN adapter hexLINSER
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v4 10/11] can: lin: Support setting LIN mode
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v4 09/11] can: lin: Handle rx offload config frames
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v4 05/11] dt-bindings: vendor-prefixes: Add hexDEV
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v4 03/11] treewide, serdev: add flags argument to receive_buf()
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v4 02/11] HID: hexLIN: Add support for USB LIN adapter
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v4 04/11] tty: serdev: Add method to enable break flags
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v4 01/11] can: Add LIN bus as CAN abstraction
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v4 00/11] LIN Bus support for Linux
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v5 1/7] dt-bindings: display: panel: Add himax hx83102 panel bindings
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/4] ASoC: dt-bindings: fsl,xcvr: Add two PLL clock sources
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: add BananaPi R3 Mini
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/4] ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: add BananaPi R3 Mini
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 09/11] can: lin: Handle rx offload config frames
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v3 08/11] can: bcm: Add LIN answer offloading for responder mode
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v3 07/11] can: Add support for serdev LIN adapters
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v3 02/11] HID: hexLIN: Add support for USB LIN bus adapter
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v3 01/11] can: Add LIN bus as CAN abstraction
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: mark label as depected to match description
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v5 2/7] drm/panel: himax-hx83102: Break out as separate driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v5 7/7] drm/panel: himax-hx83102: Support for IVO t109nw41 MIPI-DSI panel
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v5 8/8] selftest: run vector prctl test for ZVE32X
  • From: Andy Chiu <andy.chiu@xxxxxxxxxx>
• [PATCH v5 7/8] riscv: vector: adjust minimum Vector requirement to ZVE32X
  • From: Andy Chiu <andy.chiu@xxxxxxxxxx>
• [PATCH v5 6/8] riscv: hwprobe: add zve Vector subextensions into hwprobe interface
  • From: Andy Chiu <andy.chiu@xxxxxxxxxx>
• [PATCH v5 5/8] riscv: cpufeature: add zve32[xf] and zve64[xfd] isa detection
  • From: Andy Chiu <andy.chiu@xxxxxxxxxx>
• [PATCH v5 4/8] dt-bindings: riscv: add Zve32[xf] Zve64[xfd] ISA extension description
  • From: Andy Chiu <andy.chiu@xxxxxxxxxx>
• [PATCH v5 3/8] riscv: cpufeature: call match_isa_ext() for single-letter extensions
  • From: Andy Chiu <andy.chiu@xxxxxxxxxx>
• Re: [PATCH v9 2/5] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v5 2/8] riscv: smp: fail booting up smp if inconsistent vlen is detected
  • From: Andy Chiu <andy.chiu@xxxxxxxxxx>
• [PATCH v5 1/8] riscv: vector: add a comment when calling riscv_setup_vsize()
  • From: Andy Chiu <andy.chiu@xxxxxxxxxx>
• [PATCH v5 0/8] Support Zve32[xf] and Zve64[xfd] Vector subextensions
  • From: Andy Chiu <andy.chiu@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: mediatek: Add mt7986 based Bananapi R3 Mini
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: mips: brcm: Document brcm,bmips-cbr-reg property
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v9 2/5] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH v12 6/6] PCI: qcom: Add OPP support to scale performance
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v9 2/5] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [PATCH v6 0/2] regulator: sun20i: Add Allwinner D1 LDOs driver
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH v6 2/2] regulator: sun20i: Add Allwinner D1 LDOs driver
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH v6 1/2] regulator: dt-bindings: Add Allwinner D1 system LDOs
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH v9 2/5] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: mediatek: Add mt7986 based Bananapi R3 Mini
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: add BananaPi R3 Mini
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v2 0/2] Add Bananapi R3 Mini
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• Re: [PATCH 03/13] dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 3/3] phy: freescale: imx8qm-hsio: Add i.MX8QM HSIO PHY driver support
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH] dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
  • From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
• Re: [PATCH v1 2/2] HID: i2c-hid: elan: Add ili2900 timing
  • From: Doug Anderson <dianders@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: imx8mp: Initialize audio PLLs from audiomix subsystem
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: imx8mp-evk: add bt-sco sound card support
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH 03/13] dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add starry bindings and driver
  • From: Doug Anderson <dianders@xxxxxxxxxx>
• [PATCH v3 7/7] ARM: dts: rockchip: Add DSI for RK3128
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v3 6/7] ARM: dts: rockchip: Add D-PHY for RK3128
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v3 5/7] drm/rockchip: dsi: Add support for RK3128
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v3 4/7] clk: rockchip: rk3128: Add hclk_vio_h2p to critical clocks
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v3 3/7] clk: rockchip: rk3128: Export PCLK_MIPIPHY
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v3 2/7] dt-bindings: clock: rk3128: Add PCLK_MIPIPHY
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v3 1/7] dt-bindings: display: rockchip,dw-mipi-dsi: Document RK3128 DSI
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v3 0/7] Add DSI support for RK3128
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v3 0/7] Add DSI support for RK3128
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• Re: [PATCH RESEND v5 2/2] regulator: sun20i: Add Allwinner D1 LDOs driver
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH] dt-bindings: pwm: renesas,tpu: Do not require pwm-cells twice
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 02/13] mfd: pm8008: fix regmap irq chip initialisation
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: hwmon: Document adt7475 PWM initial duty cycle
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 0/7] Add DSI support for RK3128
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• Re: [PATCH] ARM: dts: ti: align panel timings node name with dtschema
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
  • From: <Parthiban.Veerasooran@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/7] Add DSI support for RK3128
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: mark label as depected to match description
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 0/7] Add DSI support for RK3128
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] riscv: dts: fix isa string for Canaan Kendryte K230
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v4] of: property: Add fw_devlink support for interrupt-map property
  • From: Anup Patel <apatel@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] of: property: Add fw_devlink support for interrupt-map property
  • From: Anup Patel <anup@xxxxxxxxxxxxxx>
• [PATCH v2 7/7] ARM: dts: rockchip: Add DSI for RK3128
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v2 6/7] ARM: dts: rockchip: Add D-PHY for RK3128
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v2 5/7] drm/rockchip: dsi: Add support for RK3128
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v2 4/7] drm/rockchip: dsi: Support optional AHB clock
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v2 3/7] clk: rockchip: rk3128: Export PCLK_MIPIPHY
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v2 2/7] dt-bindings: clock: rk3128: Add PCLK_MIPIPHY
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v2 1/7] dt-bindings: display: rockchip,dw-mipi-dsi: Document RK3128 DSI
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• [PATCH v2 0/7] Add DSI support for RK3128
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: mark label as depected to match description
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: qcom: sm8150: Add video clock controller node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/5] mips: bmips: rework and cache CBR addr handling
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH] dt-bindings: leds: mark label as depected to match description
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH 5/5] ARM: dts: imx28-tx28: drop redundant 'panel-name' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/5] ARM: dts: imx: drop redundant 'u-boot,panel-name' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/5] ARM: dts: imx6dl-aristainetos2_4: drop redundant 'power-on-delay' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/5] ARM: dts: imx: correct choice of panel native mode
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/5] ARM: dts: imx: align panel timings node name with dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] ARM: dts: cirrus: align panel timings node name with dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] ARM: dts: ti: align panel timings node name with dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] ARM: dts: vt8500: align panel timings node name with dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 4/4] arm64: dts: add description for solidrun cn9131 solidwan board
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v5 3/4] arm64: dts: add description for solidrun cn9130 som and clearfog boards
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v5 2/4] dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v5 0/4] arm64: dts: add description for solidrun cn9130 som and clearfog boards
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v5 1/4] dt-bindings: arm64: marvell: add solidrun cn9130 som based boards
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• Re: Aw: Re: [RFC v1 5/5] arm64: dts: mediatek: Add mt7986 based Bananapi R3 Mini
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: Aw: Re: [RFC v1 5/5] arm64: dts: mediatek: Add mt7986 based Bananapi R3 Mini
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v4 2/2] arm64: dts: qcom: sm8150: Add video clock controller node
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: clock: qcom: Add AHB clock for SM8150
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH v4 0/2] Add DT support for video clock controller on SM8150
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• Re: Aw: Re: [RFC v1 5/5] arm64: dts: mediatek: Add mt7986 based Bananapi R3 Mini
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2] media: mediatek: vcodec: add decoder command to support stateless decoder
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH 3/3] dt-bindings: display: panel: constrain 'reg' in DSI panels
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: display: panel: constrain 'reg' in SPI panels
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/3] dt-bindings: display: panel: constrain 'reg'
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 11/13] mfd: pm8008: rework driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] riscv: dts: fix isa string for Canaan Kendryte K230
  • From: Yangyu Chen <cyy@xxxxxxxxxxxx>
• Re: [PATCH 03/13] mfd: pm8008: deassert reset on probe
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: arm: mediatek: mmsys: Add OF graph support for board path
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: display: panel: Add Starry-er88577 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 4/4] kbuild: use $(src) instead of $(srctree)/$(src) for source directory
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 02/13] mfd: pm8008: fix regmap irq chip initialisation
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: display: panel: Add Starry-er88577 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 00/13] arm64: dts: qcom: sc8280xp-x13s: enable pm8008 camera pmic
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: display: panel: Add Starry-er88577 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: usb: qcom,dwc3: fix interrupt max items
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v2 2/2] drm/panel: starry: add new panel driver
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: display: panel: Add Starry-er88577 support
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] Add starry bindings and driver
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: input: i2c-hid: Introduce Ilitek ili2900
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: hwmon: max31790: Add maxim,pwmout-pin-as-tach-input property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 7/9] riscv: vector: adjust minimum Vector requirement to ZVE32X
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH v6 05/17] riscv: Extend cpufeature.c to detect vendor extensions
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• RE: [PATCH v5 1/2] hwmon: (isl28022) new driver for ISL28022 power monitor
  • From: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@xxxxxxxxxx>
• Re: [PATCH v6 03/17] riscv: vector: Use vlenb from DT
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: input: i2c-hid: Introduce Ilitek ili2900
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 7/9] riscv: vector: adjust minimum Vector requirement to ZVE32X
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 7/7] iommu/riscv: Paging domain support
  • From: Zong Li <zong.li@xxxxxxxxxx>
• Re: [PATCH v2 7/7] ARM: dts: samsung: exynos4212-tab3: Fix up wm1811 codec config
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: hwmon: Document adt7475 PWM initial duty cycle
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: clock: imx8mp: Add #reset-cells property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 10/13] dt-bindings: mfd: pm8008: rework binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 7/9] riscv: vector: adjust minimum Vector requirement to ZVE32X
  • From: Andy Chiu <andy.chiu@xxxxxxxxxx>
• [PATCH v1 2/2] drm/panel: starry: add new panel driver
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: display: panel: Add Starry-er88577 support
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 0/2] Add starry bindings and driver
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 2/2] HID: i2c-hid: elan: Add ili2900 timing
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: input: i2c-hid: Introduce Ilitek ili2900
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/3] LoongArch: dts: Add new supported device nodes to Loongson-2K0500
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH v2 1/3] LoongArch: dts: Remove "disabled" state of clock controller node
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH v2 0/3] LoongArch: dts: Add more support device ndoes to Loongson-2K
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH v2 3/3] LoongArch: dts: Add new supported device nodes to Loongson-2K2000
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH v4 3/3] phy: freescale: imx8qm-hsio: Add i.MX8QM HSIO PHY driver support
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v4 2/3] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v4 1/3] dt-bindings: phy: phy-imx8-pcie: Add header file for i.MX8Q HSIO SerDes PHY
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v4 0/3] Add i.MX8Q HSIO PHY support
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• Re: [PATCH 1/4] dt-bindings: firmware: secvio: Add device tree bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: firmware: secvio: Add device tree bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 0/4] soc: imx: secvio: Add secvio support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: arm: mediatek: mmsys: Add OF graph support for board path
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v4 2/6] arm64: dts: rockchip: enable thermal management on all RK3588 boards
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH 1/2] arm64: dts: imx8mp: Initialize audio PLLs from audiomix subsystem
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• [PATCH 2/2] arm64: dts: imx8mp-evk: add bt-sco sound card support
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• [PATCH 0/2] arm64: dts: imx8mp-evk: support bt-sco sound card
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RESEND v5 2/2] regulator: sun20i: Add Allwinner D1 LDOs driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH 0/2] firmware: arm_scmi: add notification completion channel
  • From: Peng Fan <peng.fan@xxxxxxx>
• Re: [PATCH] arm64: dts: imx93-11x11-evk: reoder lpi2c2 and lpi2c3 label
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH 4/4] ASoC: fsl_xcvr: Add support for i.MX95 platform
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• [PATCH 3/4] ASoC: fsl_xcvr: Support reparent pll clocks for phy_clk
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• [PATCH 2/4] ASoC: dt-bindings: fsl,xcvr: Add two PLL clock sources
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• [PATCH 1/4] ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• [PATCH 0/4] ASoC: fsl_xcvr: Support i.MX95 platform
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• Re: [PATCH 1/4] dt-bindings: firmware: secvio: Add device tree bindings
  • From: Frank Li <Frank.li@xxxxxxx>
• RE: [RFC PATCH v3 1/7] dt-bindings: pinctrl: starfive: Add JH8100 pinctrl
  • From: Yuklin Soo <yuklin.soo@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] clk: imx: clk-audiomix: Corrent parent clock for earc_phy and audpll
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• [PATCH v2 3/4] clk: imx: clk-audiomix: Add CLK_SET_RATE_PARENT flags for clocks
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• [PATCH v2 2/4] clk: imx: clk-audiomix: Add reset controller
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• [PATCH v2 1/4] dt-bindings: clock: imx8mp: Add #reset-cells property
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• [PATCH v2 0/4] clk: imx: clk-audiomix: Improvement for audiomix
  • From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
• Re: [PATCH v2] dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v4 6/7] iommu/riscv: Command and fault queue support
  • From: Zong Li <zong.li@xxxxxxxxxx>
• [PATCH v5 7/7] drm/panel: himax-hx83102: Support for IVO t109nw41 MIPI-DSI panel
  • From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 6/7] dt-bindings: display: panel: Add compatible for IVO t109nw41
  • From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 5/7] drm/panel: himax-hx83102: Support for BOE nv110wum-l60 MIPI-DSI panel
  • From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 4/7] dt-bindings: display: panel: Add compatible for BOE nv110wum-l60
  • From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 3/7] arm64: defconfig: Enable HIMAX_HX83102 panel
  • From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 2/7] drm/panel: himax-hx83102: Break out as separate driver
  • From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 1/7] dt-bindings: display: panel: Add himax hx83102 panel bindings
  • From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 0/7] Break out as separate driver and add BOE nv110wum-l60 IVO t109nw41 MIPI-DSI panel
  • From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: net: ipq4019-mdio: add IPQ9574 compatible
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH] arm64: dts: imx93-11x11-evk: reoder lpi2c2 and lpi2c3 label
  • From: Joy Zou <joy.zou@xxxxxxx>
• Re: [PATCH v1 1/2] LoongArch: dts: Add new supported device nodes to Loongson-2K0500
  • From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
• RE: [EXTERNAL] Re: [PATCH v3 4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI
  • From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
• [PATCH v4 5/5] spi: cadence: Add MRVL overlay xfer operation support
  • From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
• [PATCH v4 3/5] spi: cadence: Add Marvell xSPI IP overlay changes
  • From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
• [PATCH v4 4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI
  • From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
• [PATCH v4 2/5] dt-bindings: spi: cadence: Add MRVL overlay bindings documentation for Cadence XSPI
  • From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
• [PATCH v4 1/5] spi: cadence: Ensure data lines set to low during dummy-cycle period
  • From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
• [PATCH v4 0/5] Marvell HW overlay support for Cadence xSPI
  • From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
• [PATCH 3/4] soc: imx: secvio: Add support for SNVS secvio and tamper via SCFW
  • From: Vabhav Sharma <vabhav.sharma@xxxxxxx>
• [PATCH 4/4] arm64: dts: imx8q: Add node for Security Violation
  • From: Vabhav Sharma <vabhav.sharma@xxxxxxx>
• [PATCH 2/4] firmware: imx: Add SC APIs required for secvio module
  • From: Vabhav Sharma <vabhav.sharma@xxxxxxx>
• [PATCH 1/4] dt-bindings: firmware: secvio: Add device tree bindings
  • From: Vabhav Sharma <vabhav.sharma@xxxxxxx>
• [PATCH 0/4] soc: imx: secvio: Add secvio support
  • From: Vabhav Sharma <vabhav.sharma@xxxxxxx>
• Re: [PATCH v21 34/39] ALSA: usb-audio: Add USB offloading capable kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v3 00/29] riscv control-flow integrity for usermode
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• Re: [PATCH v21 33/39] ASoC: usb: Fetch ASoC sound card information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v3 01/29] riscv: envcfg save and restore on task switching
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• Re: [PATCH v21 27/39] ASoC: Introduce SND kcontrols to select sound card and PCM device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v3 05/29] riscv: zicfiss / zicfilp enumeration
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• Re: [PATCH v3 05/29] riscv: zicfiss / zicfilp enumeration
  • From: Andy Chiu <andy.chiu@xxxxxxxxxx>
• Re: [PATCH v21 26/39] ASoC: qcom: qdsp6: Add support to track available USB PCM devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v21 22/39] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v21 09/39] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] mips: bmips: rework and cache CBR addr handling
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 10/13] dt-bindings: mfd: pm8008: rework binding
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 09/13] pinctrl: qcom: spmi-gpio: drop broken pm8008 support
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 08/13] dt-bindings: pinctrl: qcom,pmic-gpio: drop pm8008
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 07/13] mfd: pm8008: drop unused driver data
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 06/13] mfd: pm8008: rename irq chip
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 05/13] mfd: pm8008: use lower case hex notation
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 04/13] mfd: pm8008: mark regmap structures as const
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: hwmon: Document adt7475 PWM initial duty cycle
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] hwmon: (adt7475) Add support for configuring initial PWM duty cycle
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] hwmon: (adt7475) duty cycle configuration
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: mfd: pm8008: add reset gpio
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3] of: property: Add fw_devlink support for interrupt-map property
  • From: Saravana Kannan <saravanak@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: mips: Document mti,mips-cm
  • From: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
• Re: [PATCH v21 07/39] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v21 38/39] ASoC: qcom: Populate SoC components string
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v21 34/39] ALSA: usb-audio: Add USB offloading capable kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Use full path to other schemas
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwmon: Document adt7475 PWM initial duty cycle
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 01/11] can: Add LIN bus as CAN abstraction
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Mark Ethernet devices on sa8775p as DMA-coherent
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 1/2] arm64: dts: qcom: sa8775p: mark ethernet devices as DMA-coherent
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Aw: Re: [RFC v1 5/5] arm64: dts: mediatek: Add mt7986 based Bananapi R3 Mini
  • From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 01/11] can: Add LIN bus as CAN abstraction
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH 14/17] of: dynamic: Introduce of_changeset_add_prop_bool()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 11/13] mfd: pm8008: rework driver
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 13/13] arm64: dts: qcom: sc8280xp-x13s: enable pm8008 camera pmic
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 10/12] dt-bindings: imx6q-pcie: Add i.MX8Q pcie compatible string
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v9 0/9] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [APPROACH 2 1/2] arm64: dts: amlogic: list all slave clocks for audio clock controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (adt7475) Add support for configuring initial PWM duty cycle
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/13] pinctrl: qcom: spmi-gpio: drop broken pm8008 support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH V7 4/4] PCI: Use preserve_config in place of pci_flags
  • From: Vidya Sagar <vidyas@xxxxxxxxxx>
• [PATCH V7 3/4] PCI: Unify ACPI and DT 'preserve config' support
  • From: Vidya Sagar <vidyas@xxxxxxxxxx>
• [PATCH V7 2/4] PCI: of: Add of_pci_preserve_config() for per-host bridge support
  • From: Vidya Sagar <vidyas@xxxxxxxxxx>
• [PATCH V7 1/4] PCI: Move PRESERVE_BOOT_CONFIG _DSM evaluation to pci_register_host_bridge()
  • From: Vidya Sagar <vidyas@xxxxxxxxxx>
• [PATCH V7 0/4] PCI: Add support for preserving boot configuration
  • From: Vidya Sagar <vidyas@xxxxxxxxxx>
• Re: [PATCH 07/13] mfd: pm8008: drop unused driver data
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/13] mfd: pm8008: rename irq chip
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/13] mfd: pm8008: use lower case hex notation
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 04/13] mfd: pm8008: mark regmap structures as const
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 2/7] drm/panel: himax-hx83102: Break out as separate driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 7/8] dt-bindings: iio: imu: Add ADIS1657X family devices compatibles
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: mips: brcm: Document brcm,bmips-cbr-reg property
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: mips: brcm: Document brcm,bmips-cbr-reg property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: hwmon: Document adt7475 PWM initial duty cycle
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] hwmon: (adt7475) Add support for configuring initial PWM duty cycle
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] hwmon: (adt7475) duty cycle configuration
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 RESEND 0/8] ipq9574: Enable PCI-Express support
  • From: mr.nuke.me@xxxxxxxxx
• [PATCH v3 4/4] mips: bmips: enable RAC on BMIPS4350
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 3/4] mips: bmips: setup: make CBR address configurable
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: mips: brcm: Document brcm,bmips-cbr-reg property
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 1/4] mips: bmips: rework and cache CBR addr handling
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 0/4] mips: bmips: improve handling of RAC and CBR addr
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 0/2] firmware: arm_scmi: add notification completion channel
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH 4/5] dt-bindings: mips: Document mti,mips-cm
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 10/12] dt-bindings: imx6q-pcie: Add i.MX8Q pcie compatible string
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v9 2/5] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: hwmon: max31790: Add maxim,pwmout-pin-as-tach-input property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: mips: brcm: Document brcm,bmips-cbr-reg property
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• [PATCH v4 4/4] arm64: dts: qcom: msm8976: Add WCNSS node
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH v4 3/4] arm64: dts: qcom: msm8976: Add Adreno GPU
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH v4 2/4] arm64: dts: qcom: msm8976: Add MDSS nodes
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH v4 1/4] arm64: dts: qcom: msm8976: Add IOMMU nodes
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH v4 0/4] MSM8976 MDSS/GPU/WCNSS support
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• Re: [PATCH v5 2/2] arm64: dts: rockchip: Add Radxa ZERO 3W/3E
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 1/2] LoongArch: dts: Add new supported device nodes to Loongson-2K0500
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 3/5] MIPS: Move mips_cm_probe after prom_init
  • From: "Jiaxun Yang" <jiaxun.yang@xxxxxxxxxxx>
• Re: [PATCH v3 7/7] iommu/riscv: Paging domain support
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• Re: [APPROACH 2 2/2] dt-bindings: clock: meson: Convert axg-audio-clkc to YAML format
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 06/11] dt-bindings: net/can: Add serial (serdev) LIN adapter
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 7/7] iommu/riscv: Paging domain support
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• Re: [PATCH 03/13] mfd: pm8008: deassert reset on probe
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 6/7] iommu/riscv: Command and fault queue support
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• Re: [PATCH v4 7/7] iommu/riscv: Paging domain support
  • From: Zong Li <zong.li@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: Add QCM6490 SHIFTphone 8
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 6/7] iommu/riscv: Command and fault queue support
  • From: Zong Li <zong.li@xxxxxxxxxx>
• Re: [PATCH v9 2/5] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH v4 5/7] iommu/riscv: Device directory management.
  • From: Zong Li <zong.li@xxxxxxxxxx>
• Re: [PATCH v4 2/7] iommu/riscv: Add RISC-V IOMMU platform device driver
  • From: Zong Li <zong.li@xxxxxxxxxx>
• [APPROACH 2 1/2] arm64: dts: amlogic: list all slave clocks for audio clock controller
  • From: Jan Dakinevich <jan.dakinevich@xxxxxxxxxxxxxxxxx>
• [QUESTION] Convert axg-audio-clkc to YAML format
  • From: Jan Dakinevich <jan.dakinevich@xxxxxxxxxxxxxxxxx>
• [APPROACH 2 2/2] dt-bindings: clock: meson: Convert axg-audio-clkc to YAML format
  • From: Jan Dakinevich <jan.dakinevich@xxxxxxxxxxxxxxxxx>
• [APPROACH 1 1/1] dt-bindings: clock: meson: Convert axg-audio-clkc to YAML format
  • From: Jan Dakinevich <jan.dakinevich@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] drivers: iio: imu: Add support for adis1657x family
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 0/2] qcom: initial support for the SHIFTphone 8
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/3] dt-bindings: mtd: amlogic,meson-nand: support fields for boot ROM code
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] powerpc: dts: add power management nodes to FSL chips
  • From: Michael Ellerman <patch-notifications@xxxxxxxxxxxxxx>
• Re: [PATCH v7 3/5] media: i2c: add MAX96717 driver
  • From: "Togorean, Bogdan" <Bogdan.Togorean@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: ti: k3-j722s: Add support for SERDES0
  • From: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
• Re: [PATCH v4 2/6] arm64: dts: rockchip: enable thermal management on all RK3588 boards
  • From: Alexey Charkov <alchark@xxxxxxxxx>
• Re: [PATCH v21 38/39] ASoC: qcom: Populate SoC components string
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 34/39] ALSA: usb-audio: Add USB offloading capable kcontrol
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 33/39] ASoC: usb: Fetch ASoC sound card information
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 27/39] ASoC: Introduce SND kcontrols to select sound card and PCM device
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 26/39] ASoC: qcom: qdsp6: Add support to track available USB PCM devices
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 22/39] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 11/39] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 09/39] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v21 07/39] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• [PATCH v3 13/13] arm64: dts: rockchip: Add rock5b overlays for PCIe endpoint mode
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 12/13] arm64: dts: rockchip: Add PCIe endpoint mode support
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 11/13] misc: pci_endpoint_test: Add support for rockchip rk3588
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 10/13] PCI: dw-rockchip: Add endpoint mode support
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 09/13] PCI: dw-rockchip: Refactor the driver to prepare for EP mode
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 08/13] PCI: dw-rockchip: Add rockchip_pcie_get_ltssm() helper
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 07/13] PCI: dw-rockchip: Fix weird indentation
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 06/13] dt-bindings: rockchip: Add DesignWare based PCIe Endpoint controller
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 05/13] dt-bindings: PCI: rockchip-dw-pcie: Fix description of legacy irq
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 04/13] dt-bindings: PCI: rockchip-dw-pcie: Prepare for Endpoint mode support
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 03/13] dt-bindings: PCI: snps,dw-pcie-ep: Add tx_int{a,b,c,d} legacy irqs
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 02/13] dt-bindings: PCI: snps,dw-pcie-ep: Add vendor specific interrupt-names
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 01/13] dt-bindings: PCI: snps,dw-pcie-ep: Add vendor specific reg-name
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 00/13] PCI: dw-rockchip: Add endpoint mode support
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v2 8/8] drivers: iio: imu: Add support for adis1657x family
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 7/8] dt-bindings: iio: imu: Add ADIS1657X family devices compatibles
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 6/8] drivers: iio: imu: adis16475: generic computation for sample rate
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 5/8] iio: imu: adis16475: Create push single sample API
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 4/8] iio: imu: adis_buffer: Add buffer setup API with buffer attributes
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 3/8] iio: imu: adis16475: Re-define ADIS16475_DATA
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 2/8] drivers: iio: imu: Add support for ADIS16501
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 1/8] dt-bindings: iio: imu: Add ADIS16501 compatibles
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 0/8] adis16501 and adis1657x support
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• Re: [PATCH v3 01/11] can: Add LIN bus as CAN abstraction
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
  • From: <Parthiban.Veerasooran@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: arm: mediatek: mmsys: Add OF graph support for board path
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: ti: k3-j722s: Add support for SERDES0
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v2 2/7] ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/6] arm64: dts: rockchip: enable thermal management on all RK3588 boards
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH 3/5] MIPS: Move mips_cm_probe after prom_init
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: ti: k3-j722s-evm: Update USB0 and USB1 configuration for EVM
  • From: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
• Re: [PATCH v3 01/11] can: Add LIN bus as CAN abstraction
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v4 2/6] arm64: dts: rockchip: enable thermal management on all RK3588 boards
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH 0/5] MIPS: cm: Probe GCR address from devicetree
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: ti: k3-j722s: Add support for SERDES0
  • From: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
• Re: [PATCH v4 2/6] arm64: dts: rockchip: enable thermal management on all RK3588 boards
  • From: Alexey Charkov <alchark@xxxxxxxxx>
• Re: [PATCH v5 0/3] pinctrl: scmi: support i.MX95 OEM extensions
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH 1/5] regulator: dt-bindings: Unify compatible
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: ti: k3-j722s-evm: Update USB0 and USB1 configuration for EVM
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: ti: k3-j722s: Add support for SERDES0
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v4 5/7] drm/panel: himax-hx83102: Support for BOE nv110wum-l60 MIPI-DSI panel
  • From: cong yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] pinctrl: zynqmp: Support muxing individual pins
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v4 2/7] drm/panel: himax-hx83102: Break out as separate driver
  • From: cong yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [EXTERNAL] Re: [PATCH v3 4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 2/6] arm64: dts: rockchip: enable thermal management on all RK3588 boards
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH v4 1/7] dt-bindings: display: panel: Add himax hx83102 panel bindings
  • From: cong yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 2/6] arm64: dts: rockchip: enable thermal management on all RK3588 boards
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v3 06/11] dt-bindings: net/can: Add serial (serdev) LIN adapter
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH RFC v6 10/10] iio: adc: ad7380: add support for resolution boost
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH RFC v6 09/10] iio: adc: ad7380: add support for rolling average oversampling mode
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v9 0/9] Turris Omnia MCU driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• [PATCH v1 2/2] riscv: dts: starfive: Enable Bluetooth on JH7100 boards
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
• [PATCH v1 1/2] riscv: dts: starfive: Add JH7100 high speed UARTs
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
• [PATCH v1 0/2] riscv: dts: starfive: Enable Bluetooth on JH7100 boards
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: allwinner: Add cache information to the SoC dtsi for H616
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: allwinner: Add cache information to the SoC dtsi for H616
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH v2 7/7] ARM: dts: samsung: exynos4212-tab3: Fix up wm1811 codec config
  • From: Artur Weber <aweber.kernel@xxxxxxxxx>
• [PATCH v2 6/7] ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detection
  • From: Artur Weber <aweber.kernel@xxxxxxxxx>
• [PATCH v2 5/7] ASoC: samsung: midas_wm1811: Use dev_err_probe where appropriate
  • From: Artur Weber <aweber.kernel@xxxxxxxxx>
• [PATCH v2 4/7] ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection
  • From: Artur Weber <aweber.kernel@xxxxxxxxx>
• [PATCH v2 2/7] ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection
  • From: Artur Weber <aweber.kernel@xxxxxxxxx>
• [PATCH v2 3/7] ASoC: samsung: midas_wm1811: Add headset mic bias supply support
  • From: Artur Weber <aweber.kernel@xxxxxxxxx>
• [PATCH v2 1/7] ASoC: dt-bindings: samsung,midas-audio: Add headset mic bias supply
  • From: Artur Weber <aweber.kernel@xxxxxxxxx>
• [PATCH v2 0/7] ASoC: samsung: midas-audio: Add GPIO-based headset jack detection
  • From: Artur Weber <aweber.kernel@xxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: rockchip: Add OPP data for CPU cores on RK3588
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: rockchip: Add OPP data for CPU cores on RK3588
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/9] riscv: smp: fail booting up smp if inconsistent vlen is detected
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v9 8/9] ARM: dts: turris-omnia: Add MCU system-controller node
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v9 9/9] ARM: dts: turris-omnia: Add GPIO key node for front button
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v9 1/9] dt-bindings: firmware: add cznic,turris-omnia-mcu binding
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v9 0/9] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
  • From: Prahlad Valluru <quic_vvalluru@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] arm64: dts: rockchip: Add Radxa ZERO 3W/3E
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
  • From: Prahlad Valluru <quic_vvalluru@xxxxxxxxxxx>
• [PATCH] arm64: dts: imx8mp-evk: Add MX8-DLVDS-LCD1 display module support
  • From: Liu Ying <victor.liu@xxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: rockchip: Add OPP data for CPU cores on RK3588
  • From: Alexey Charkov <alchark@xxxxxxxxx>
• RE: [PATCH v5 0/3] pinctrl: scmi: support i.MX95 OEM extensions
  • From: Peng Fan <peng.fan@xxxxxxx>
• Re: [PATCH 3/3] arm64: dts: ti: k3-j722s-evm: Update USB0 and USB1 configuration for EVM
  • From: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
• Re: [PATCH v8 3/3] pinctrl: nuvoton: Add ma35d1 pinctrl and GPIO driver
  • From: Jacky Huang <ychuang570808@xxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: ti: k3-j722s: Redefine USB1 node description
  • From: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: rockchip: Add OPP data for CPU cores on RK3588
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH v5 0/3] pinctrl: scmi: support i.MX95 OEM extensions
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: rockchip: Add OPP data for CPU cores on RK3588
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxx>
• Re: [PATCH v3 03/11] tty: serdev: Add flag buffer aware receive_buf_fp()
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v8 3/3] pinctrl: nuvoton: Add ma35d1 pinctrl and GPIO driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 07/12] can: Add support for serdev LIN adapters
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v2 01/12] can: Add LIN bus as CAN abstraction
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v2 02/12] HID: hexLIN: Add support for USB LIN bus adapter
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v5 2/7] mtd: rawnand: qcom: cleanup qcom_nandc driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v5 4/7] drivers: mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v5 0/7] Add QPIC SPI NAND driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v5 7/7] arm64: dts: qcom: ipq9574: Disable eMMC node
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v5 3/7] mtd: rawnand: qcom: Add qcom prefix to common api
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v5 1/7] spi: dt-bindings: Introduce qcom,spi-qpic-snand
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v5 6/7] arm64: dts: qcom: ipq9574: Add SPI nand support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v1 2/2] LoongArch: dts: Add new supported device nodes to Loongson-2K2000
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH v1 1/2] LoongArch: dts: Add new supported device nodes to Loongson-2K0500
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH v1 0/2] LoongArch: dts: Add more support device ndoes to Loongson-2K
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH v4 2/9] riscv: smp: fail booting up smp if inconsistent vlen is detected
  • From: Andy Chiu <andy.chiu@xxxxxxxxxx>
• Re: [PATCH 16/17] mfd: Add support for LAN966x PCI device
  • From: <Steen.Hegelund@xxxxxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 6/6] arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 0/3] Add devicetree support of USB for QDU/QRU1000
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 12/17] irqchip: Add support for LAN966x OIC
  • From: <Steen.Hegelund@xxxxxxxxxxxxx>
• Re: [PATCH v8 5/5] clk: meson: c3: add c3 clock peripherals controller driver
  • From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
• Re: [PATCH v8 4/5] clk: meson: c3: add support for the C3 SoC PLL clock
  • From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
• RE: [EXTERNAL] Re: [PATCH v3 4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI
  • From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] ASoC: dt-bindings: Add bindings for Cadence I2S-MC controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: add QCM6490 SHIFTphone 8
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 1/2] ASoC: dt-bindings: Add bindings for Cadence I2S-MC controller
  • From: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] ASoC: cdns: Add drivers of Cadence Multi-Channel I2S Controller
  • From: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: Add QCM6490 SHIFTphone 8
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v2] dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 3/7] dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/3] MIPS: mobileye: Add EyeQ6H device tree
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 0/2] Add Cadence I2S-MC controller driver
  • From: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>