Re: [PATCH v11 09/24] drm/rockchip: dw_hdmi: add regulator support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Donnerstag, 4. Juli 2024, 11:09:00 CEST schrieb Diederik de Haas:
> On Friday, 22 April 2022 09:28:26 CEST Sascha Hauer wrote:
> > The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs needed
> > for the HDMI port. add support for these to the driver for boards which
> > have them supplied by switchable regulators.
> > 
> > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> > Reviewed-by: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 41 +++++++++++++++++++--
> >  1 file changed, 38 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c index
> > b64cc62c7b5af..fe4f9556239ac 100644
> > --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > @@ -9,6 +9,7 @@
> >  #include <linux/platform_device.h>
> >  #include <linux/phy/phy.h>
> >  #include <linux/regmap.h>
> > +#include <linux/regulator/consumer.h>
> > 
> >  #include <drm/bridge/dw_hdmi.h>
> >  #include <drm/drm_edid.h>
> > @@ -76,6 +77,8 @@ struct rockchip_hdmi {
> >  	struct clk *ref_clk;
> >  	struct clk *grf_clk;
> >  	struct dw_hdmi *hdmi;
> > +	struct regulator *avdd_0v9;
> > +	struct regulator *avdd_1v8;
> >  	struct phy *phy;
> >  };
> > 
> > @@ -226,6 +229,14 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi
> > *hdmi) return PTR_ERR(hdmi->grf_clk);
> >  	}
> > 
> > +	hdmi->avdd_0v9 = devm_regulator_get(hdmi->dev, "avdd-0v9");
> > +	if (IS_ERR(hdmi->avdd_0v9))
> > +		return PTR_ERR(hdmi->avdd_0v9);
> > +
> > +	hdmi->avdd_1v8 = devm_regulator_get(hdmi->dev, "avdd-1v8");
> > +	if (IS_ERR(hdmi->avdd_1v8))
> > +		return PTR_ERR(hdmi->avdd_1v8);
> > +
> >  	return 0;
> >  }
> > 
> > @@ -566,11 +577,23 @@ static int dw_hdmi_rockchip_bind(struct device *dev,
> > struct device *master, return ret;
> >  	}
> > 
> > +	ret = regulator_enable(hdmi->avdd_0v9);
> > +	if (ret) {
> > +		DRM_DEV_ERROR(hdmi->dev, "failed to enable avdd0v9: 
> %d\n", ret);
> > +		goto err_avdd_0v9;
> > +	}
> > +
> > +	ret = regulator_enable(hdmi->avdd_1v8);
> > +	if (ret) {
> > +		DRM_DEV_ERROR(hdmi->dev, "failed to enable avdd1v8: 
> %d\n", ret);
> > +		goto err_avdd_1v8;
> > +	}
> > +
> >  	ret = clk_prepare_enable(hdmi->ref_clk);
> >  	if (ret) {
> >  		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI 
> reference clock: %d\n",
> >  			      ret);
> > -		return ret;
> > +		goto err_clk;
> >  	}
> > 
> >  	if (hdmi->chip_data == &rk3568_chip_data) {
> > @@ -594,10 +617,19 @@ static int dw_hdmi_rockchip_bind(struct device *dev,
> > struct device *master, */
> >  	if (IS_ERR(hdmi->hdmi)) {
> >  		ret = PTR_ERR(hdmi->hdmi);
> > -		drm_encoder_cleanup(encoder);
> > -		clk_disable_unprepare(hdmi->ref_clk);
> > +		goto err_bind;
> >  	}
> > 
> > +	return 0;
> > +
> > +err_bind:
> > +	clk_disable_unprepare(hdmi->ref_clk);
> > +	drm_encoder_cleanup(encoder);
> > +err_clk:
> > +	regulator_disable(hdmi->avdd_1v8);
> > +err_avdd_1v8:
> > +	regulator_disable(hdmi->avdd_0v9);
> > +err_avdd_0v9:
> >  	return ret;
> >  }
> > 
> > @@ -608,6 +640,9 @@ static void dw_hdmi_rockchip_unbind(struct device *dev,
> > struct device *master,
> > 
> >  	dw_hdmi_unbind(hdmi->hdmi);
> >  	clk_disable_unprepare(hdmi->ref_clk);
> > +
> > +	regulator_disable(hdmi->avdd_1v8);
> > +	regulator_disable(hdmi->avdd_0v9);
> >  }
> > 
> >  static const struct component_ops dw_hdmi_rockchip_ops = {
> 
> Is it possible to probe for those avdd_0v9 and avdd_1v8 regulators only on 
> devices that should have them?
> 
> On a Rock64 (rk3328), but probably for all VOP1 devices, they're not present 
> and that results in the following warnings:
> dwhdmi-rockchip ff3c0000.hdmi: supply avdd-0v9 not found, using dummy regulator
> dwhdmi-rockchip ff3c0000.hdmi: supply avdd-1v8 not found, using dummy regulator

counter-argument, why not define them in the dts?
I.e. looking at the rock64 schematics, you want the dvideo_avdd_1v8 (from
LDO1) and dvideo_avdd_1v0 (from LDO3) if I'm not mistaken. Why this stuff
is called dvideo and not hdmi in there I have no clue ;-)


Heiko






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux