On Wed, Jul 03, 2024 at 03:34:34PM +0200, Matteo Martelli wrote: > Add iio driver and DT binding for the Microchip PAC1921 Current/Power > monitor. > > Implemented most of the features with few limitations listed in the > driver commit message. > > Tested with a Pine64 host board connected to a PAC1921 click board [1] > via I2C. The PAC1921 click board embeds the Microchip PAC1921 device > and a 10 mOhms shunt resistor. The PAC1921 datasheet is at [2]. > > [1]: https://www.mikroe.com/pac1921-click > [2]: https://ww1.microchip.com/downloads/en/DeviceDoc/PAC1921-Data-Sheet-DS20005293E.pdf > > Signed-off-by: Matteo Martelli <matteomartelli3@xxxxxxxxx> Marius, could you take a look at this driver/binding? > --- > Matteo Martelli (2): > dt-bindings: iio: adc: add binding for pac1921 > iio: adc: add support for pac1921 > > .../ABI/testing/sysfs-bus-iio-adc-pac1921 | 45 + > .../bindings/iio/adc/microchip,pac1921.yaml | 79 ++ > MAINTAINERS | 7 + > drivers/iio/adc/Kconfig | 10 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/pac1921.c | 1033 ++++++++++++++++++++ > 6 files changed, 1175 insertions(+) > --- > base-commit: 529d2e1900642eba6df28307e26e19793e227546 > change-id: 20240606-iio-pac1921-77fa0fa3ac11 > > Best regards, > -- > Matteo Martelli <matteomartelli3@xxxxxxxxx> >
Attachment:
signature.asc
Description: PGP signature
