xtheadvector is a custom extension that is based upon riscv vector version 0.7.1 [1]. All of the vector routines have been modified to support this alternative vector version based upon whether xtheadvector was determined to be supported at boot. vlenb is not supported on the existing xtheadvector hardware, so a devicetree property thead,vlenb is added to provide the vlenb to Linux. There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is used to request which thead vendor extensions are supported on the current platform. This allows future vendors to allocate hwprobe keys for their vendor. Support for xtheadvector is also added to the vector kselftests. Signed-off-by: Charlie Jenkins <charlie@xxxxxxxxxxxx> [1] https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361c61d335e03d3134b14133f/xtheadvector.adoc --- This series is a continuation of a different series that was fragmented into two other series in an attempt to get part of it merged in the 6.10 merge window. The split-off series did not get merged due to a NAK on the series that added the generic riscv,vlenb devicetree entry. This series has converted riscv,vlenb to thead,vlenb to remedy this issue. The original series is titled "riscv: Support vendor extensions and xtheadvector" [3]. The series titled "riscv: Extend cpufeature.c to detect vendor extensions" is still under development and this series is based on that series! [4] I have tested this with an Allwinner Nezha board. I ran into issues booting the board after 6.9-rc1 so I applied these patches to 6.8. There are a couple of minor merge conflicts that do arrise when doing that, so please let me know if you have been able to boot this board with a 6.9 kernel. I used SkiffOS [1] to manage building the image, but upgraded the U-Boot version to Samuel Holland's more up-to-date version [2] and changed out the device tree used by U-Boot with the device trees that are present in upstream linux and this series. Thank you Samuel for all of the work you did to make this task possible. [1] https://github.com/skiffos/SkiffOS/tree/master/configs/allwinner/nezha [2] https://github.com/smaeul/u-boot/commit/2e89b706f5c956a70c989cd31665f1429e9a0b48 [3] https://lore.kernel.org/all/20240503-dev-charlie-support_thead_vector_6_9-v6-0-cb7624e65d82@xxxxxxxxxxxx/ [4] https://lore.kernel.org/linux-riscv/20240609-support_vendor_extensions-v2-0-9a43f1fdcbb9@xxxxxxxxxxxx/ --- Changes in v4: - Replace inline asm with C (Samuel) - Rename VCSRs to CSRs (Samuel) - Replace .insn directives with .4byte directives - Link to v3: https://lore.kernel.org/r/20240619-xtheadvector-v3-0-bff39eb9668e@xxxxxxxxxxxx Changes in v3: - Add back Heiko's signed-off-by (Conor) - Mark RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 as a bitmask - Link to v2: https://lore.kernel.org/r/20240610-xtheadvector-v2-0-97a48613ad64@xxxxxxxxxxxx Changes in v2: - Removed extraneous references to "riscv,vlenb" (Jess) - Moved declaration of "thead,vlenb" into cpus.yaml and added restriction that it's only applicable to thead cores (Conor) - Check CONFIG_RISCV_ISA_XTHEADVECTOR instead of CONFIG_RISCV_ISA_V for thead,vlenb (Jess) - Fix naming of hwprobe variables (Evan) - Link to v1: https://lore.kernel.org/r/20240609-xtheadvector-v1-0-3fe591d7f109@xxxxxxxxxxxx --- Charlie Jenkins (12): dt-bindings: riscv: Add xtheadvector ISA extension description dt-bindings: cpus: add a thead vlen register length property riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree riscv: Add thead and xtheadvector as a vendor extension riscv: vector: Use vlenb from DT for thead riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT riscv: Add xtheadvector instruction definitions riscv: vector: Support xtheadvector save/restore riscv: hwprobe: Add thead vendor extension probing riscv: hwprobe: Document thead vendor extensions and xtheadvector extension selftests: riscv: Fix vector tests selftests: riscv: Support xtheadvector in vector tests Heiko Stuebner (1): RISC-V: define the elements of the VCSR vector CSR Documentation/arch/riscv/hwprobe.rst | 10 + Documentation/devicetree/bindings/riscv/cpus.yaml | 19 ++ .../devicetree/bindings/riscv/extensions.yaml | 10 + arch/riscv/Kconfig.vendor | 26 ++ arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 3 +- arch/riscv/include/asm/cpufeature.h | 2 + arch/riscv/include/asm/csr.h | 15 ++ arch/riscv/include/asm/hwprobe.h | 5 +- arch/riscv/include/asm/switch_to.h | 2 +- arch/riscv/include/asm/vector.h | 224 ++++++++++++---- arch/riscv/include/asm/vendor_extensions/thead.h | 42 +++ .../include/asm/vendor_extensions/thead_hwprobe.h | 18 ++ .../include/asm/vendor_extensions/vendor_hwprobe.h | 37 +++ arch/riscv/include/uapi/asm/hwprobe.h | 3 +- arch/riscv/include/uapi/asm/vendor/thead.h | 3 + arch/riscv/kernel/cpufeature.c | 51 +++- arch/riscv/kernel/kernel_mode_vector.c | 8 +- arch/riscv/kernel/process.c | 4 +- arch/riscv/kernel/signal.c | 6 +- arch/riscv/kernel/sys_hwprobe.c | 5 + arch/riscv/kernel/vector.c | 25 +- arch/riscv/kernel/vendor_extensions.c | 10 + arch/riscv/kernel/vendor_extensions/Makefile | 2 + arch/riscv/kernel/vendor_extensions/thead.c | 18 ++ .../riscv/kernel/vendor_extensions/thead_hwprobe.c | 19 ++ tools/testing/selftests/riscv/vector/.gitignore | 3 +- tools/testing/selftests/riscv/vector/Makefile | 17 +- .../selftests/riscv/vector/v_exec_initval_nolibc.c | 93 +++++++ tools/testing/selftests/riscv/vector/v_helpers.c | 67 +++++ tools/testing/selftests/riscv/vector/v_helpers.h | 7 + tools/testing/selftests/riscv/vector/v_initval.c | 22 ++ .../selftests/riscv/vector/v_initval_nolibc.c | 68 ----- .../selftests/riscv/vector/vstate_exec_nolibc.c | 20 +- .../testing/selftests/riscv/vector/vstate_prctl.c | 295 ++++++++++++--------- 34 files changed, 888 insertions(+), 271 deletions(-) --- base-commit: 11cc01d4d2af304b7288251aad7e03315db8dffc change-id: 20240530-xtheadvector-833d3d17b423 -- - Charlie
