Re: [PATCH v2 3/6] clk: qcom: clk-alpha-pll: Add support for Regera PLL ops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 02, 2024 at 09:20:41PM GMT, Satya Priya Kakitapalli wrote:
> From: Taniya Das <quic_tdas@xxxxxxxxxxx>
> 
> Regera PLL ops are required to control the Regera PLL from clock
> controller drivers, thus add support for the same.

the same what?

> 
> Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
> ---
>  drivers/clk/qcom/clk-alpha-pll.c | 32 +++++++++++++++++++++++++++++++-
>  drivers/clk/qcom/clk-alpha-pll.h |  5 +++++
>  2 files changed, 36 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index d2bef078588f..afb7ab72c90d 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -1,7 +1,7 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /*
>   * Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved.
> - * Copyright (c) 2021, 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2021, 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
>   */
>  
>  #include <linux/kernel.h>
> @@ -2605,3 +2605,33 @@ const struct clk_ops clk_alpha_pll_stromer_plus_ops = {
>  	.set_rate = clk_alpha_pll_stromer_plus_set_rate,
>  };
>  EXPORT_SYMBOL_GPL(clk_alpha_pll_stromer_plus_ops);
> +
> +void clk_regera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> +			     const struct alpha_pll_config *config)
> +{
> +	clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
> +	clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);
> +	clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll), config->config_ctl_val);
> +	clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U(pll), config->config_ctl_hi_val);
> +	clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U1(pll), config->config_ctl_hi1_val);
> +	clk_alpha_pll_write_config(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
> +	clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U(pll), config->user_ctl_hi_val);
> +	clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U1(pll), config->user_ctl_hi1_val);
> +	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll), config->test_ctl_val);
> +	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val);
> +	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U1(pll), config->test_ctl_hi1_val);
> +
> +	/* Set operation mode to STANDBY */
> +	regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
> +}
> +EXPORT_SYMBOL_GPL(clk_regera_pll_configure);

Does it make sense to call this function from clk_zonda_pll_configure()?

> +
> +const struct clk_ops clk_alpha_pll_regera_ops = {
> +	.enable = clk_zonda_pll_enable,
> +	.disable = clk_zonda_pll_disable,
> +	.is_enabled = clk_alpha_pll_is_enabled,
> +	.recalc_rate = clk_trion_pll_recalc_rate,
> +	.round_rate = clk_alpha_pll_round_rate,
> +	.set_rate = clk_zonda_pll_set_rate,
> +};
> +EXPORT_SYMBOL_GPL(clk_alpha_pll_regera_ops);
> diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
> index fb6d50263bb9..5bb0a07da53d 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.h
> +++ b/drivers/clk/qcom/clk-alpha-pll.h
> @@ -21,6 +21,7 @@ enum {
>  	CLK_ALPHA_PLL_TYPE_LUCID = CLK_ALPHA_PLL_TYPE_TRION,
>  	CLK_ALPHA_PLL_TYPE_AGERA,
>  	CLK_ALPHA_PLL_TYPE_ZONDA,
> +	CLK_ALPHA_PLL_TYPE_REGERA = CLK_ALPHA_PLL_TYPE_ZONDA,
>  	CLK_ALPHA_PLL_TYPE_ZONDA_OLE,
>  	CLK_ALPHA_PLL_TYPE_LUCID_EVO,
>  	CLK_ALPHA_PLL_TYPE_LUCID_OLE,
> @@ -189,6 +190,8 @@ extern const struct clk_ops clk_alpha_pll_postdiv_lucid_evo_ops;
>  extern const struct clk_ops clk_alpha_pll_rivian_evo_ops;
>  #define clk_alpha_pll_postdiv_rivian_evo_ops clk_alpha_pll_postdiv_fabia_ops
>  
> +extern const struct clk_ops clk_alpha_pll_regera_ops;
> +
>  void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>  			     const struct alpha_pll_config *config);
>  void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> @@ -210,5 +213,7 @@ void clk_rivian_evo_pll_configure(struct clk_alpha_pll *pll, struct regmap *regm
>  				  const struct alpha_pll_config *config);
>  void clk_stromer_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>  			       const struct alpha_pll_config *config);
> +void clk_regera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> +			     const struct alpha_pll_config *config);
>  
>  #endif
> 
> -- 
> 2.25.1
> 

-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux