On Tue, Jul 2, 2024 at 10:16 PM Jonathan Cameron <jic23@xxxxxxxxxx> wrote: > > On Tue, 02 Jul 2024 16:59:09 +0200 > Petar Stoykov via B4 Relay <devnull+pd.pstoykov.gmail.com@xxxxxxxxxx> wrote: > > > From: Petar Stoykov <pd.pstoykov@xxxxxxxxx> > > > > Sensirion SDP500 is a digital differential pressure sensor. The sensor is > > accessed over I2C. > > > > Signed-off-by: Petar Stoykov <pd.pstoykov@xxxxxxxxx> > Hi Petar > > Given you are going to be doing a v4, a few comments inline on things > to tidy up in here. > > Note that I've already tagged what may be the last pull request from me > for the 6.11 merge window, so this is probably 6.12 material now anyway. > Hence plenty of time to tidy up. > > Jonathan > Hi Jonathan, I have no rush, thank you for the explanation! > > diff --git a/drivers/iio/pressure/sdp500.c b/drivers/iio/pressure/sdp500.c > > new file mode 100644 > > index 000000000000..661c70bc1b5b > > --- /dev/null > > +++ b/drivers/iio/pressure/sdp500.c > > @@ -0,0 +1,153 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Driver for Sensirion sdp500 and sdp510 pressure sensors > > + * > > + * Datasheet: https://sensirion.com/resource/datasheet/sdp600 > > + */ > > + > > +#include <linux/i2c.h> > > +#include <linux/crc8.h> > > +#include <linux/iio/iio.h> > > #include <linux/mod_devicetable.h> appropriate for the id tables. I don't understand. Why add an extra header to a working driver? I will add it and test the driver in the meantime. > > > +#include <linux/regulator/consumer.h> > > +#include <asm/unaligned.h> > > + > > +#define SDP500_CRC8_POLYNOMIAL 0x31 // x8 + x5 + x4 + 1 (normalized to 0x31) > > For IIO we tend to just use c style comments /* xxx */ > and not c++ ones. I try to follow this rule but once in a while I slip to my old habits. My teachers all used // for C for whatever reason. Will fix. > > > +#define SDP500_READ_SIZE 3 > > > +static int sdp500_read_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int *val, int *val2, long mask) > > +{ > > + int ret; > > + u8 rxbuf[SDP500_READ_SIZE]; > > + u8 received_crc, calculated_crc; > > + struct sdp500_data *data = iio_priv(indio_dev); > > + struct i2c_client *client = to_i2c_client(data->dev); > > + > > + switch (mask) { > > + case IIO_CHAN_INFO_RAW: > > + ret = i2c_master_recv(client, rxbuf, SDP500_READ_SIZE); > > + if (ret < 0) { > > + dev_err(data->dev, "Failed to receive data"); > > + return ret; > > + } > > + if (ret != SDP500_READ_SIZE) { > > + dev_err(data->dev, "Data is received wrongly"); > > + return -EIO; > > + } > > + > > + received_crc = rxbuf[2]; > > + calculated_crc = crc8(sdp500_crc8_table, rxbuf, sizeof(rxbuf) - 1, 0x00); > A line break in here to keep it under 80 chars would be good (see below). I find the 80 chars too constraining and also saw that the limit was updated to 100 somewhere in kernel.org which made me happy. But.. you seem to feel strongly enough about this so I'll trim lines to 80. > > > + if (received_crc != calculated_crc) { > > + dev_err(data->dev, "calculated crc = 0x%.2X, received 0x%.2X", > > + calculated_crc, received_crc); > > + return -EIO; > > + } > > + > > + *val = get_unaligned_be16(rxbuf); > > + return IIO_VAL_INT; > > + case IIO_CHAN_INFO_SCALE: > > + *val = 1; > > + *val2 = 60; > > + > > + return IIO_VAL_FRACTIONAL; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static const struct iio_info sdp500_info = { > > + .read_raw = &sdp500_read_raw, > > +}; > > + > > +static int sdp500_probe(struct i2c_client *client) > > +{ > > + struct iio_dev *indio_dev; > > + struct sdp500_data *data; > > + struct device *dev = &client->dev; > > + int ret; > > + u8 rxbuf[SDP500_READ_SIZE]; > > + > > + ret = devm_regulator_get_enable(dev, "vdd"); > > + if (ret) > > + return dev_err_probe(dev, ret, "Failed to get and enable regulator\n"); > Given you are going around again. Add a line break before " > General rule is stay under 80 chars unless it hurts readability. > > > +
