Hi Heiko, Thanks for submitting this. A quick scan indicates it should work with a (recent) Debian kernel OOTB :-) On Wednesday, 3 July 2024 23:05:24 CEST Heiko Stuebner wrote: > +&sdhci { > + bus-width = <8>; > + no-sdio; > + no-sd; > + non-removable; > + max-frequency = <200000000>; > + mmc-hs400-1_8v; > + mmc-hs400-enhanced-strobe; > + mmc-hs200-1_8v; > + status = "okay"; > +}; > + > +&sdmmc { > + max-frequency = <200000000>; > + no-sdio; > + no-mmc; > + bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + disable-wp; > + sd-uhs-sdr104; > + vmmc-supply = <&vcc_3v3_s3>; > + vqmmc-supply = <&vccio_sd_s0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>; > + status = "okay"; > +}; > + > +/* M.2 E-KEY */ > +&sdio { > + broken-cd; > + bus-width = <4>; > + cap-sdio-irq; > + disable-wp; > + keep-power-in-suspend; > + max-frequency = <150000000>; > + mmc-pwrseq = <&sdio_pwrseq>; > + no-sd; > + no-mmc; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdiom0_pins>; > + sd-uhs-sdr104; > + vmmc-supply = <&vcc3v3_ekey>; > + status = "okay"; > +}; > + > +&sfc { > + pinctrl-names = "default"; > + pinctrl-0 = <&fspim2_pins>; > + status = "okay"; Shouldn't those properties be sorted alphabetically? Or at least consistently? Note that the same issue is present on other places too, but I believe the above quoted part shows the issue enough. Cheers, Diederik
Attachment:
signature.asc
Description: This is a digitally signed message part.