From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> Fix PCIe PERST# signal polarity in TI J721E used on TI K3 machines. PCIe PERST# needs to be de-asserted for PCIe to work, however, the driver is doing the opposite and the device tree files are defining the signal with the wrong polarity to cope with that. Fix both the driver and the affected DT files. Emanuele Ghidoli (2): arm64: dts: ti: Mark PCIe PERST# polarity active low in DT PCI: j721e: Fix PERST# polarity arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 +- arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts | 2 +- arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts | 2 +- arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 2 +- arch/arm64/boot/dts/ti/k3-am69-sk.dts | 6 +++--- arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 2 +- arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 2 +- arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 6 +++--- arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 4 ++-- arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts | 2 +- arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 2 +- arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 4 ++-- drivers/pci/controller/cadence/pci-j721e.c | 4 ++-- 13 files changed, 20 insertions(+), 20 deletions(-) -- 2.39.2
