From: Utsav Agarwal <utsav.agarwal@xxxxxxxxxx> Keypad specific setup is relaxed if no keypad rows/columns are specified, enabling a purely gpio operation. Signed-off-by: Utsav Agarwal <utsav.agarwal@xxxxxxxxxx> --- drivers/input/keyboard/adp5588-keys.c | 37 +++++++++++++++++++++++++++++++---- 1 file changed, 33 insertions(+), 4 deletions(-) diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index 09bcfc6b9408..7c32f8b69a3e 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -188,6 +188,7 @@ struct adp5588_kpad { u32 cols; u32 unlock_keys[2]; int nkeys_unlock; + bool gpio_only; unsigned short keycode[ADP5588_KEYMAPSIZE]; unsigned char gpiomap[ADP5588_MAXGPIO]; struct gpio_chip gc; @@ -431,10 +432,12 @@ static int adp5588_gpio_add(struct adp5588_kpad *kpad) kpad->gc.label = kpad->client->name; kpad->gc.owner = THIS_MODULE; - girq = &kpad->gc.irq; - gpio_irq_chip_set_chip(girq, &adp5588_irq_chip); - girq->handler = handle_bad_irq; - girq->threaded = true; + if (kpad->client->irq) { + girq = &kpad->gc.irq; + gpio_irq_chip_set_chip(girq, &adp5588_irq_chip); + girq->handler = handle_bad_irq; + girq->threaded = true; + } mutex_init(&kpad->gpio_lock); @@ -632,6 +635,21 @@ static int adp5588_fw_parse(struct adp5588_kpad *kpad) struct i2c_client *client = kpad->client; int ret, i; + /* + * Check if the device is to be operated purely in GPIO mode. To do + * so, check that no keypad rows or columns have been specified, + * since all GPINS should be configured as GPIO. + */ + ret = device_property_present(&client->dev, + "keypad,num-rows"); + ret |= device_property_present(&client->dev, + "keypad,num-columns"); + /* If purely GPIO, skip keypad setup */ + if (!ret) { + kpad->gpio_only = true; + return 0; + } + ret = matrix_keypad_parse_properties(&client->dev, &kpad->rows, &kpad->cols); if (ret) @@ -775,6 +793,11 @@ static int adp5588_probe(struct i2c_client *client) if (error) return error; + if (kpad->gpio_only && !client->irq) { + dev_info(&client->dev, "Rev.%d, started as GPIO only\n", revid); + return 0; + } + error = devm_request_threaded_irq(&client->dev, client->irq, adp5588_hard_irq, adp5588_thread_irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, @@ -785,6 +808,12 @@ static int adp5588_probe(struct i2c_client *client) return error; } + if (kpad->gpio_only) { + dev_info(&client->dev, "Rev.%d GPIO only, irq %d\n", + revid, client->irq); + return 0; + } + dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq); return 0; } -- 2.34.1