[PATCH 2/5] arm64: dts: layerscape: remove big-endian for mmc nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



According to binding doc fsl,esdhc.yaml, the default endian mode is
big-endian. So remove big-endian property to fix below CHECK_DTBS warnings:

arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: mmc@1560000: Unevaluated properties are not allowed ('big-endian' was unexpected)
        from schema $id: http://devicetree.org/schemas/mmc/fsl,esdhc.yaml

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 --
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 -
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 2 --
 3 files changed, 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index e61ea7e0737e4..42d2134b8170b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -164,7 +164,6 @@ esdhc0: mmc@1560000 {
 					    QORIQ_CLK_PLL_DIV(1)>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 			status = "disabled";
 		};
@@ -183,7 +182,6 @@ esdhc1: mmc@1580000 {
 					    QORIQ_CLK_PLL_DIV(1)>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			broken-cd;
 			bus-width = <4>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 17f4e31711209..9a19bcd1850d9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -431,7 +431,6 @@ esdhc: mmc@1560000 {
 			clock-frequency = <0>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 200e52622f998..9bbe2d686a39f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -315,7 +315,6 @@ esdhc: mmc@1560000 {
 			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 		};
 
@@ -694,7 +693,6 @@ wdog0: watchdog@2ad0000 {
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
-			big-endian;
 		};
 
 		edma0: dma-controller@2c00000 {
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux