Re: [PATCH 2/2] arm64: dts: rockchip: add rock5 itx board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 04.07.24 um 12:05 schrieb Heiko Stübner:
Hi Diederik,

Am Donnerstag, 4. Juli 2024, 11:38:51 CEST schrieb Diederik de Haas:
Thanks for submitting this. A quick scan indicates it should work with a
(recent) Debian kernel OOTB :-)

On Wednesday, 3 July 2024 23:05:24 CEST Heiko Stuebner wrote:
+&sdhci {
+       bus-width = <8>;
+       no-sdio;
+       no-sd;
+       non-removable;
+       max-frequency = <200000000>;
+       mmc-hs400-1_8v;
+       mmc-hs400-enhanced-strobe;
+       mmc-hs200-1_8v;
+       status = "okay";
+};
+
+&sdmmc {
+       max-frequency = <200000000>;
+       no-sdio;
+       no-mmc;
+       bus-width = <4>;
+       cap-mmc-highspeed;
+       cap-sd-highspeed;
+       disable-wp;
+       sd-uhs-sdr104;
+       vmmc-supply = <&vcc_3v3_s3>;
+       vqmmc-supply = <&vccio_sd_s0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
+       status = "okay";
+};
+
+/* M.2 E-KEY */
+&sdio {
+       broken-cd;
+       bus-width = <4>;
+       cap-sdio-irq;
+       disable-wp;
+       keep-power-in-suspend;
+       max-frequency = <150000000>;
+       mmc-pwrseq = <&sdio_pwrseq>;
+       no-sd;
+       no-mmc;
+       non-removable;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdiom0_pins>;
+       sd-uhs-sdr104;
+       vmmc-supply = <&vcc3v3_ekey>;
+       status = "okay";
+};
+
+&sfc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&fspim2_pins>;
+       status = "okay";

Shouldn't those properties be sorted alphabetically? Or at least consistently?
Note that the same issue is present on other places too, but I believe the
above quoted part shows the issue enough.

The main sorting is
- compatible
- reg
[... alphabetically ...]
- status

Yeah ... that's always the question when adding new board files. Do it like
"it's always been done" or re-sort the properties alphanumeric _everywhere_
which looks quite strange at times. If I'm getting the newly added dt
coding style correctly common (subsystem?) properties should also be placed
before vendor (driver?) specific ones. Yet I didn't see a board file which
places 'regulator-max-microvolt' before 'regulator-min-microvolt'. So I
guess it's fine if it's done consistently within the same file?

Alex
But now that I look at it, you're right there are some non-alphabetical
shenanigans going on there in the sdmmc and sdhci nodes ;-)

Heiko



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux