On Wed, Jul 3, 2024 at 10:17 AM Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> wrote: > > Add an initial devicetree for the Lenovo Yoga slim 7x with support for > Display, usb, keyboard, touchscreen, PMICs, speaker audio, gpu, NVMe, > and remoteprocs. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 910 +++++++++++++++++++++ > 2 files changed, 911 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index e0babd642fa8..d7de2aea4748 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -261,4 +261,5 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb > +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts > new file mode 100644 > index 000000000000..1d00119691bc > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts > @@ -0,0 +1,910 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > + > +#include "x1e80100.dtsi" > +#include "x1e80100-pmics.dtsi" > + > +/ { > + model = "Lenovo Yoga Slim 7x"; > + compatible = "lenovo,yoga-slim7x", "qcom,x1e80100"; > + > + pmic-glink { > + compatible = "qcom,x1e80100-pmic-glink", > + "qcom,sm8550-pmic-glink", > + "qcom,pmic-glink"; > + #address-cells = <1>; > + #size-cells = <0>; > + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, > + <&tlmm 123 GPIO_ACTIVE_HIGH>, > + <&tlmm 125 GPIO_ACTIVE_HIGH>; > + > + /* Left-side rear port */ > + connector@0 { > + compatible = "usb-c-connector"; > + reg = <0>; > + power-role = "dual"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + pmic_glink_ss0_hs_in: endpoint { > + remote-endpoint = <&usb_1_ss0_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_ss0_ss_in: endpoint { > + remote-endpoint = <&usb_1_ss0_qmpphy_out>; > + }; > + }; > + }; > + }; > + > + /* Left-side front port */ > + connector@1 { > + compatible = "usb-c-connector"; > + reg = <1>; > + power-role = "dual"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + pmic_glink_ss1_hs_in: endpoint { > + remote-endpoint = <&usb_1_ss1_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_ss1_ss_in: endpoint { > + remote-endpoint = <&usb_1_ss1_qmpphy_out>; > + }; > + }; > + }; > + }; > + > + /* Right-side port */ > + connector@2 { > + compatible = "usb-c-connector"; > + reg = <2>; > + power-role = "dual"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + pmic_glink_ss2_hs_in: endpoint { > + remote-endpoint = <&usb_1_ss2_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_ss2_ss_in: endpoint { > + remote-endpoint = <&usb_1_ss2_qmpphy_out>; > + }; > + }; > + }; > + }; > + }; > + > + reserved-memory { > + linux,cma { > + compatible = "shared-dma-pool"; > + size = <0x0 0x8000000>; > + reusable; > + linux,cma-default; > + }; > + }; > + > + sound { > + compatible = "qcom,x1e80100-sndcard"; > + model = "X1E80100-LENOVO-Yoga-Slim7x"; > + audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", > + "TwitterLeft IN", "WSA WSA_SPK2 OUT", > + "WooferRight IN", "WSA2 WSA_SPK2 OUT", > + "TwitterRight IN", "WSA2 WSA_SPK2 OUT"; > + > + wsa-dai-link { > + link-name = "WSA Playback"; > + > + cpu { > + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; > + }; > + > + codec { > + sound-dai = <&left_woofer>, <&left_tweeter>, > + <&swr0 0>, <&lpass_wsamacro 0>, > + <&right_woofer>, <&right_tweeter>, > + <&swr3 0>, <&lpass_wsa2macro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + > + va-dai-link { > + link-name = "VA Capture"; > + > + cpu { > + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; > + }; > + > + codec { > + sound-dai = <&lpass_vamacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vreg_edp_3p3: regulator-edp-3p3 { > + compatible = "regulator-fixed"; > + > + regulator-name = "VREG_EDP_3P3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-0 = <&edp_reg_en>; > + pinctrl-names = "default"; > + > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vreg_nvme: regulator-nvme { > + compatible = "regulator-fixed"; > + > + regulator-name = "VREG_NVME_3P3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-0 = <&nvme_reg_en>; > + pinctrl-names = "default"; > + }; > +}; > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm8550-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + vdd-bob1-supply = <&vph_pwr>; > + vdd-bob2-supply = <&vph_pwr>; > + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; > + vdd-l2-l13-l14-supply = <&vreg_bob1>; > + vdd-l5-l16-supply = <&vreg_bob1>; > + vdd-l6-l7-supply = <&vreg_bob2>; > + vdd-l8-l9-supply = <&vreg_bob1>; > + vdd-l12-supply = <&vreg_s5j_1p2>; > + vdd-l15-supply = <&vreg_s4c_1p8>; > + vdd-l17-supply = <&vreg_bob2>; > + > + vreg_bob1: bob1 { > + regulator-name = "vreg_bob1"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob2: bob2 { > + regulator-name = "vreg_bob2"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1b_1p8: ldo1 { > + regulator-name = "vreg_l1b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2b_3p0: ldo2 { > + regulator-name = "vreg_l2b_3p0"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3100000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8b_3p0: ldo8 { > + regulator-name = "vreg_l8b_3p0"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12b_1p2: ldo12 { > + regulator-name = "vreg_l12b_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l14b_3p0: ldo14 { > + regulator-name = "vreg_l14b_3p0"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l15b_1p8: ldo15 { > + regulator-name = "vreg_l15b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + }; > + > + regulators-1 { > + compatible = "qcom,pm8550ve-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vdd-l1-supply = <&vreg_s5j_1p2>; > + vdd-l2-supply = <&vreg_s1f_0p7>; > + vdd-l3-supply = <&vreg_s1f_0p7>; > + vdd-s4-supply = <&vph_pwr>; > + > + vreg_s4c_1p8: smps4 { > + regulator-name = "vreg_s4c_1p8"; > + regulator-min-microvolt = <1856000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1c_1p2: ldo1 { > + regulator-name = "vreg_l1c_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2c_0p8: ldo2 { > + regulator-name = "vreg_l2c_0p8"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3c_0p8: ldo3 { > + regulator-name = "vreg_l3c_0p8"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-2 { > + compatible = "qcom,pmc8380-rpmh-regulators"; > + qcom,pmic-id = "d"; > + > + vdd-l1-supply = <&vreg_s1f_0p7>; > + vdd-l2-supply = <&vreg_s1f_0p7>; > + vdd-l3-supply = <&vreg_s4c_1p8>; > + vdd-s1-supply = <&vph_pwr>; > + > + vreg_l1d_0p8: ldo1 { > + regulator-name = "vreg_l1d_0p8"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2d_0p9: ldo2 { > + regulator-name = "vreg_l2d_0p9"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3d_1p8: ldo3 { > + regulator-name = "vreg_l3d_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-3 { > + compatible = "qcom,pmc8380-rpmh-regulators"; > + qcom,pmic-id = "e"; > + > + vdd-l2-supply = <&vreg_s1f_0p7>; > + vdd-l3-supply = <&vreg_s5j_1p2>; > + > + vreg_l2e_0p8: ldo2 { > + regulator-name = "vreg_l2e_0p8"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3e_1p2: ldo3 { > + regulator-name = "vreg_l3e_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-4 { > + compatible = "qcom,pmc8380-rpmh-regulators"; > + qcom,pmic-id = "f"; > + > + vdd-l1-supply = <&vreg_s5j_1p2>; > + vdd-l2-supply = <&vreg_s5j_1p2>; > + vdd-l3-supply = <&vreg_s5j_1p2>; > + vdd-s1-supply = <&vph_pwr>; > + > + vreg_s1f_0p7: smps1 { > + regulator-name = "vreg_s1f_0p7"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1100000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1f_1p0: ldo1 { > + regulator-name = "vreg_l1f_1p0"; > + regulator-min-microvolt = <1024000>; > + regulator-max-microvolt = <1024000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2f_1p0: ldo2 { > + regulator-name = "vreg_l2f_1p0"; > + regulator-min-microvolt = <1024000>; > + regulator-max-microvolt = <1024000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3f_1p0: ldo3 { > + regulator-name = "vreg_l3f_1p0"; > + regulator-min-microvolt = <1024000>; > + regulator-max-microvolt = <1024000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-6 { > + compatible = "qcom,pm8550ve-rpmh-regulators"; > + qcom,pmic-id = "i"; > + > + vdd-l1-supply = <&vreg_s4c_1p8>; > + vdd-l2-supply = <&vreg_s5j_1p2>; > + vdd-l3-supply = <&vreg_s1f_0p7>; > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + > + vreg_s1i_0p9: smps1 { > + regulator-name = "vreg_s1i_0p9"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s2i_1p0: smps2 { > + regulator-name = "vreg_s2i_1p0"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1100000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1i_1p8: ldo1 { > + regulator-name = "vreg_l1i_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2i_1p2: ldo2 { > + regulator-name = "vreg_l2i_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3i_0p8: ldo3 { > + regulator-name = "vreg_l3i_0p8"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-7 { > + compatible = "qcom,pm8550ve-rpmh-regulators"; > + qcom,pmic-id = "j"; > + > + vdd-l1-supply = <&vreg_s1f_0p7>; > + vdd-l2-supply = <&vreg_s5j_1p2>; > + vdd-l3-supply = <&vreg_s1f_0p7>; > + vdd-s5-supply = <&vph_pwr>; > + > + vreg_s5j_1p2: smps5 { > + regulator-name = "vreg_s5j_1p2"; > + regulator-min-microvolt = <1256000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1j_0p8: ldo1 { > + regulator-name = "vreg_l1j_0p8"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2j_1p2: ldo2 { > + regulator-name = "vreg_l2j_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3j_0p8: ldo3 { > + regulator-name = "vreg_l3j_0p8"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&gpu { > + status = "okay"; > + > + zap-shader { > + firmware-name = "qcom/x1e80100/LENOVO/14Q8X9/qcdxkmsuc8380.mbn"; I ended up with: firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn"; my DMI string is: DMI: LENOVO 83ED/LNVNB161216, BIOS NHCN36WW 05/23/2024 idk if that is different for you? > + }; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + > + status = "okay"; > + I also have this, which is working for me (sry about gmail butchering the formating): touchpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&tpad_default>; pinctrl-names = "default"; wakeup-source; }; basically just uncommented the node from Xilin's tree, but seems to work fine. BR, -R > + keyboard@3a { > + compatible = "hid-over-i2c"; > + reg = <0x3a>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; > + > + pinctrl-0 = <&kybd_default>; > + pinctrl-names = "default"; > + > + wakeup-source; > + }; > +}; > + > +&i2c8 { > + clock-frequency = <400000>; > + > + status = "okay"; > + > + touchscreen@14 { > + compatible = "hid-over-i2c"; > + reg = <0x14>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; > + > + pinctrl-0 = <&ts0_default>; > + pinctrl-names = "default"; > + }; > +}; > + > +&lpass_tlmm { > + spkr_01_sd_n_active: spkr-01-sd-n-active-state { > + pins = "gpio12"; > + function = "gpio"; > + drive-strength = <16>; > + bias-disable; > + output-low; > + }; > + > + spkr_23_sd_n_active: spkr-23-sd-n-active-state { > + pins = "gpio13"; > + function = "gpio"; > + drive-strength = <16>; > + bias-disable; > + output-low; > + }; > +}; > + > +&lpass_vamacro { > + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; > + pinctrl-names = "default"; > + > + vdd-micb-supply = <&vreg_l1b_1p8>; > + qcom,dmic-sample-rate = <4800000>; > +}; > + > +&mdss { > + status = "okay"; > +}; > + > +&mdss_dp3 { > + compatible = "qcom,x1e80100-dp"; > + /delete-property/ #sound-dai-cells; > + > + status = "okay"; > + > + aux-bus { > + panel { > + compatible = "edp-panel"; > + power-supply = <&vreg_edp_3p3>; > + > + port { > + edp_panel_in: endpoint { > + remote-endpoint = <&mdss_dp3_out>; > + }; > + }; > + }; > + }; > + > + ports { > + port@1 { > + reg = <1>; > + > + mdss_dp3_out: endpoint { > + data-lanes = <0 1 2 3>; > + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; > + > + remote-endpoint = <&edp_panel_in>; > + }; > + }; > + }; > +}; > + > +&mdss_dp3_phy { > + vdda-phy-supply = <&vreg_l3j_0p8>; > + vdda-pll-supply = <&vreg_l2j_1p2>; > + > + status = "okay"; > +}; > + > +&pcie4 { > + status = "okay"; > +}; > + > +&pcie4_phy { > + vdda-phy-supply = <&vreg_l3j_0p8>; > + vdda-pll-supply = <&vreg_l3e_1p2>; > + > + status = "okay"; > +}; > + > +&pcie6a { > + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; > + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; > + > + vddpe-3v3-supply = <&vreg_nvme>; > + > + pinctrl-0 = <&pcie6a_default>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&pcie6a_phy { > + vdda-phy-supply = <&vreg_l1d_0p8>; > + vdda-pll-supply = <&vreg_l2j_1p2>; > + > + status = "okay"; > +}; > + > +&qupv3_0 { > + status = "okay"; > +}; > + > +&qupv3_1 { > + status = "okay"; > +}; > + > +&qupv3_2 { > + status = "okay"; > +}; > + > +&remoteproc_adsp { > + firmware-name = "qcom/x1e80100/LENOVO/14Q8X9/qcadsp8380.mbn", > + "qcom/x1e80100/LENOVO/14Q8X9/adsp_dtbs.elf"; > + status = "okay"; > +}; > + > +&remoteproc_cdsp { > + firmware-name = "qcom/x1e80100/LENOVO/14Q8X9/qccdsp8380.mbn", > + "qcom/x1e80100/LENOVO/14Q8X9/cdsp_dtbs.elf"; > + > + status = "okay"; > +}; > + > +&smb2360_0_eusb2_repeater { > + vdd18-supply = <&vreg_l3d_1p8>; > + vdd3-supply = <&vreg_l2b_3p0>; > +}; > + > +&smb2360_1_eusb2_repeater { > + vdd18-supply = <&vreg_l3d_1p8>; > + vdd3-supply = <&vreg_l14b_3p0>; > +}; > + > +&smb2360_2_eusb2_repeater { > + vdd18-supply = <&vreg_l3d_1p8>; > + vdd3-supply = <&vreg_l8b_3p0>; > +}; > + > +&swr0 { > + status = "okay"; > + > + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; > + pinctrl-names = "default"; > + > + /* WSA8845, Left Woofer */ > + left_woofer: speaker@0,0 { > + compatible = "sdw20217020400"; > + reg = <0 0>; > + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; > + #sound-dai-cells = <0>; > + sound-name-prefix = "WooferLeft"; > + vdd-1p8-supply = <&vreg_l15b_1p8>; > + vdd-io-supply = <&vreg_l12b_1p2>; > + qcom,port-mapping = <1 2 3 7 10 13>; > + }; > + > + /* WSA8845, Left Tweeter */ > + left_tweeter: speaker@0,1 { > + compatible = "sdw20217020400"; > + reg = <0 1>; > + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; > + #sound-dai-cells = <0>; > + sound-name-prefix = "TwitterLeft"; > + vdd-1p8-supply = <&vreg_l15b_1p8>; > + vdd-io-supply = <&vreg_l12b_1p2>; > + qcom,port-mapping = <4 5 6 7 11 13>; > + }; > +}; > + > + > +&swr3 { > + status = "okay"; > + > + pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; > + pinctrl-names = "default"; > + > + /* WSA8845, Right Woofer */ > + right_woofer: speaker@0,0 { > + compatible = "sdw20217020400"; > + reg = <0 0>; > + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; > + #sound-dai-cells = <0>; > + sound-name-prefix = "WooferRight"; > + vdd-1p8-supply = <&vreg_l15b_1p8>; > + vdd-io-supply = <&vreg_l12b_1p2>; > + qcom,port-mapping = <1 2 3 7 10 13>; > + }; > + > + /* WSA8845, Right Tweeter */ > + right_tweeter: speaker@0,1 { > + compatible = "sdw20217020400"; > + reg = <0 1>; > + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; > + #sound-dai-cells = <0>; > + sound-name-prefix = "TwitterRight"; > + vdd-1p8-supply = <&vreg_l15b_1p8>; > + vdd-io-supply = <&vreg_l12b_1p2>; > + qcom,port-mapping = <4 5 6 7 11 13>; > + }; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <34 2>, /* Unused */ > + <44 4>, /* SPI (TPM) */ > + <238 1>; /* UFS Reset */ > + > + edp_reg_en: edp-reg-en-state { > + pins = "gpio70"; > + function = "gpio"; > + drive-strength = <16>; > + bias-disable; > + }; > + > + kybd_default: kybd-default-state { > + pins = "gpio67"; > + function = "gpio"; > + bias-disable; > + }; > + > + nvme_reg_en: nvme-reg-en-state { > + pins = "gpio18"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + pcie6a_default: pcie2a-default-state { > + clkreq-n-pins { > + pins = "gpio153"; > + function = "pcie6a_clk"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + perst-n-pins { > + pins = "gpio152"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + wake-n-pins { > + pins = "gpio154"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > + > + ts0_default: ts0-default-state { > + int-n-pins { > + pins = "gpio51"; > + function = "gpio"; > + bias-disable; > + }; > + > + reset-n-pins { > + pins = "gpio48"; > + function = "gpio"; > + output-high; > + drive-strength = <16>; > + }; > + }; > + > +}; > + > +&usb_1_ss0_hsphy { > + vdd-supply = <&vreg_l3j_0p8>; > + vdda12-supply = <&vreg_l2j_1p2>; > + > + phys = <&smb2360_0_eusb2_repeater>; > + > + status = "okay"; > +}; > + > +&usb_1_ss0_qmpphy { > + vdda-phy-supply = <&vreg_l3e_1p2>; > + vdda-pll-supply = <&vreg_l1j_0p8>; > + > + orientation-switch; > + > + status = "okay"; > +}; > + > +&usb_1_ss0 { > + status = "okay"; > +}; > + > +&usb_1_ss0_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_1_ss0_dwc3_hs { > + remote-endpoint = <&pmic_glink_ss0_hs_in>; > +}; > + > +&usb_1_ss0_qmpphy_out { > + remote-endpoint = <&pmic_glink_ss0_ss_in>; > +}; > + > +&usb_1_ss1_hsphy { > + vdd-supply = <&vreg_l3j_0p8>; > + vdda12-supply = <&vreg_l2j_1p2>; > + > + phys = <&smb2360_1_eusb2_repeater>; > + > + status = "okay"; > +}; > + > +&usb_1_ss1_qmpphy { > + vdda-phy-supply = <&vreg_l3e_1p2>; > + vdda-pll-supply = <&vreg_l2d_0p9>; > + > + orientation-switch; > + > + status = "okay"; > +}; > + > +&usb_1_ss1 { > + status = "okay"; > +}; > + > +&usb_1_ss1_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_1_ss1_dwc3_hs { > + remote-endpoint = <&pmic_glink_ss1_hs_in>; > +}; > + > +&usb_1_ss1_qmpphy_out { > + remote-endpoint = <&pmic_glink_ss1_ss_in>; > +}; > + > +&usb_1_ss2_hsphy { > + vdd-supply = <&vreg_l3j_0p8>; > + vdda12-supply = <&vreg_l2j_1p2>; > + > + phys = <&smb2360_2_eusb2_repeater>; > + > + status = "okay"; > +}; > + > +&usb_1_ss2_qmpphy { > + vdda-phy-supply = <&vreg_l3e_1p2>; > + vdda-pll-supply = <&vreg_l2d_0p9>; > + > + status = "okay"; > +}; > + > +&usb_1_ss2 { > + status = "okay"; > +}; > + > +&usb_1_ss2_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_1_ss2_dwc3_hs { > + remote-endpoint = <&pmic_glink_ss2_hs_in>; > +}; > + > +&usb_1_ss2_qmpphy_out { > + remote-endpoint = <&pmic_glink_ss2_ss_in>; > +}; > > -- > 2.25.1 > >