[Prev Page][Next Page]
- Re: [PATCH 1/7] gpiolib: gpiolib-of: Implement device tree gpio-names based lookup
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH] arm: dts: exynos4412-trats2: rename alias for i2c_ak8975 label
- From: Tomasz Stanislawski <t.stanislaws@xxxxxxxxxxx>
- RE: [PATCH] mmc: add a driver for the Renesas v08r07s01e SD/SDIO host controller
- From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
- Re: [PATCH V8 3/9] phy: SPEAr1310/40-miphy: Add binding information
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH 1/3] net: phy: add minimal support for QSGMII PHY
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- Re: [alsa-devel] [PATCH 1/5] ASoC: omap: rx51: Use devm_snd_soc_register_card
- From: Rajeev kumar <rajeev-dlh.kumar@xxxxxx>
- [PATCH v2 1/5] ARM: introduce CPU_METHOD_OF_DECLARE_SETUP()
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH v2 4/5] ARM: dts: enable SMP support for bcm28155
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH v2 2/5] ARM: add SMP support for Broadcom mobile SoCs
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH v2 3/5] ARM: configs: enable SMP in bcm_defconfig
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH v2 5/5] ARM: dts: enable SMP support for bcm21664
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH v2 0/5] ARM: SMP: support Broadcom mobile SoCs
- From: Alex Elder <elder@xxxxxxxxxx>
- Re: [PATCH 2/6] regulator: arizona-ldo1: Move setup processing from arizona-core
- From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/6] mfd: arizona: Factor out read of device tree GPIOs
- From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH] ARM: shmobile: armadillo-reference dts: Seiko Instruments, Inc is "sii"
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- Re: [PATCH 3/5] ASoC: RX-51: Add DT support to sound driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/5] ARM: add SMP support for Broadcom mobile SoCs
- From: Alex Elder <elder@xxxxxxxxxx>
- Re: [PATCH 5/5] ASoC: tlv320aic3x: fix shared reset pin for DT
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 4/5] ASoC: RX-51: Convert to table based DAPM setup
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/5] ASoC: omap: rx51: Use devm_snd_soc_register_card
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 9/9] DMA: shdma: wire r8a7790
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/5] ASoC: Allow Aux Codecs to be specified using DT
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/6] regulator: arizona-ldo1: Move setup processing from arizona-core
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] Configure FSL eSPI CSBEF, CSAFT, and whether to send all received data to user
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH V8 1/9] clk: SPEAr13XX: Fix pcie clock name
- From: Mohit Kumar <mohit.kumar@xxxxxx>
- [PATCH V8 2/9] SPEAr13XX: Fix static mapping table
- From: Mohit Kumar <mohit.kumar@xxxxxx>
- [PATCH V8 7/9] SPEAr13XX: dts: Add PCIe node information
- From: Mohit Kumar <mohit.kumar@xxxxxx>
- [PATCH V8 9/9] SPEAr13xx: defconfig: Update
- From: Mohit Kumar <mohit.kumar@xxxxxx>
- [PATCH V8 5/9] phy: SPEAr1310/40-miphy: Add phy driver for PCIe and SATA
- From: Mohit Kumar <mohit.kumar@xxxxxx>
- [PATCH V8 8/9] pcie: SPEAr13xx: Add designware wrapper support
- From: Mohit Kumar <mohit.kumar@xxxxxx>
- [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support
- From: Mohit Kumar <mohit.kumar@xxxxxx>
- Re: [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH V8 6/9] SPEAr13XX: Add binding information for PCIe controller
- From: Mohit Kumar <mohit.kumar@xxxxxx>
- [PATCH V8 4/9] SPEAr: misc: Add binding information
- From: Mohit Kumar <mohit.kumar@xxxxxx>
- [PATCH V8 3/9] phy: SPEAr1310/40-miphy: Add binding information
- From: Mohit Kumar <mohit.kumar@xxxxxx>
- Re: [PATCH v2 0/7] usb: gadget: gr_udc: OF and ep.maxpacket_limit improvements and fix of GFP_KERNEL in atomic context
- From: Andreas Larsson <andreas@xxxxxxxxxxx>
- [PATCH v3] pcie: Add Xilinx PCIe Host Bridge IP driver
- From: Srikanth Thokala <sthokal@xxxxxxxxxx>
- Re: [PATCH v2 2/5] Power: reset: add bindings for keystone reset driver
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- [PATCH RFC v11 4/6] dma: of: Add common xlate function for matching by channel id
- From: Alexander Popov <a13xp0p0v88@xxxxxxxxx>
- [PATCH RFC v11 6/6] dma: mpc512x: register for device tree channel lookup
- From: Alexander Popov <a13xp0p0v88@xxxxxxxxx>
- [PATCH RFC v11 5/6] dma: mpc512x: add device tree binding document
- From: Alexander Popov <a13xp0p0v88@xxxxxxxxx>
- [PATCH RFC v11 0/6] MPC512x DMA slave s/g support, OF DMA lookup
- From: Alexander Popov <a13xp0p0v88@xxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- Re: [PATCH 1/6] mfd: arizona: Factor out read of device tree GPIOs
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 2/6] regulator: arizona-ldo1: Move setup processing from arizona-core
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- Re: [PATCH V7 1/1] drivers/gpio: Altera soft IP GPIO driver and devicetree binding
- From: Tien Hock Loh <thloh@xxxxxxxxxx>
- Re: [PATCH v2 8/9] DMA: shdma: initial of common code
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] regulator: s5m8767: Use same binding for external control as in s2mps11
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [PATCH v2 2/9] ARM: shmobile: r8a7790: add dma defines for sys and audio dmacs
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH 12/14] ARM: dts: exynos5: add system register support
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [PATCH 1/2] ARM: berlin: add the LIBGPIO as a dependency for the BG2Q
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: berlin: add the LIBGPIO as a dependency for the BG2Q
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- Re: [RFC PATCH 12/14] ARM: dts: exynos5: add system register support
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: berlin: add the LIBGPIO as a dependency for the BG2Q
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- Re: [PATCH] dts: socfpga: Add DTS entries for USB
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: berlin: add the LIBGPIO as a dependency for the BG2Q
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- Re: [PATCH 4/4] regulator: s5m8767: Use same binding for external control as in s2mps11
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [RFC PATCH 12/14] ARM: dts: exynos5: add system register support
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250
- From: Vikas Sajjan <sajjan.linux@xxxxxxxxx>
- Re: [PATCH 5/5] arm: exynos: Add MCPM call-back functions
- From: Dave Martin <Dave.Martin@xxxxxxx>
- Re: [PATCH v4 2/2] reset: Add GPIO support to reset controller framework
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- Re: [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCH 4/4] regulator: s5m8767: Use same binding for external control as in s2mps11
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [RFC PATCH 09/14] ARM: dts: s6e3fa0: add DT bindings
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [PATCH 4/4] regulator: s5m8767: Use same binding for external control as in s2mps11
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] tty/serial: atmel_serial: Fix device tree documentation
- From: Richard Genoud <richard.genoud@xxxxxxxxx>
- [PATCH 1/2] ARM: berlin: add the LIBGPIO as a dependency for the BG2Q
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH 0/2] ARM: berlin: add GPIO support for the BG2Q
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH 07/14] ARM: dts: exynos_dsim: add exynos5420 Soc compatible
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [RFC PATCH 14/14] ARM: dts: exynos5420: add dsi node
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [RFC PATCH 04/14] ARM: dts: add exynos5 compatible to sysreg
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [PATCH] tty/serial: atmel_serial: Fix device tree documentation
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- [PATCH v3 4/4] ARM: socfpga: dts: add reset-controller
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v3 1/4] reset: add driver for socfpga
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v3 3/4] Documentation: dt: reset: move socfpga-reset
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] regulator: s5m8767: Use same binding for external control as in s2mps11
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- [PATCH v3 2/4] Documentation: dt: socfpga: add reset-cells property
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH] tty/serial: atmel_serial: Fix device tree documentation
- From: Richard Genoud <richard.genoud@xxxxxxxxx>
- [PATCH 0/7] net: rfkill: gpio: Add device tree support
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH 3/7] net: rfkill: gpio: use clk_prepare_enable/clk_disable_unprepare
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH 6/7] net: rfkill: gpio: add clock-frequency device tree property
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH 5/7] net: rfkill: gpio: add device tree support
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH 1/7] gpiolib: gpiolib-of: Implement device tree gpio-names based lookup
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH 4/7] net: rfkill: gpio: fix reversed clock enable state
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH 7/7] ARM: sun7i: cubietruck: enable bluetooth module
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH 2/7] gpiolib: Support purely name based gpiod lookup in device trees
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v2 1/4] reset: add driver for socfpga
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- Re: [PATCH] tty/serial: atmel_serial: Fix device tree documentation
- From: Richard Genoud <richard.genoud@xxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
- Re: Device tree support for Atmel AC97 controller on AT91SAM9263
- From: Takashi Iwai <tiwai@xxxxxxx>
- [RFC PATCH 14/14] ARM: dts: exynos5420: add dsi node
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 10/14] drm/panel: add S6E3FA0 driver
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 06/14] drm/exynos: support MIPI DSI command mode
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 13/14] ARM: dts: exynos5420: add mipi-phy node
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 11/14] ARM: dts: exynos4: add system register node
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 09/14] ARM: dts: s6e3fa0: add DT bindings
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 12/14] ARM: dts: exynos5: add system register support
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 07/14] ARM: dts: exynos_dsim: add exynos5420 Soc compatible
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 08/14] drm/exynos: dsi: add driver data to support Exynos5420
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 03/14] drm/exynos: use wait_event_timeout() for safety usage
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 04/14] ARM: dts: add exynos5 compatible to sysreg
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 05/14] ARM: dts: samsung-fimd: add I80 specific properties
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 02/14] drm/exynos: dsi: delay setting clocks after reset
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 00/14] drm/exynos: support MIPI DSI command mode display
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [RFC PATCH 01/14] drm/exynos: dsi: move the Eot packets configuration point
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- Re: [PATCHv2 5/8] ARM: EXYNOS: Support secondary CPU boot of Exynos3250
- From: Tushar Behera <tushar.behera@xxxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- Re: [PATCH v4 1/2] SPI: Add driver for Cadence SPI controller
- From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
- [PATCH 2/3] dt: Document Qualcomm IPQ8064 pinctrl binding
- From: Andy Gross <agross@xxxxxxxxxxxxxx>
- [PATCH 3/3] ARM: qcom: Select PINCTRL by default for ARCH_QCOM
- From: Andy Gross <agross@xxxxxxxxxxxxxx>
- [PATCH 1/3] pinctrl: qcom: Add definitions for IPQ8064
- From: Andy Gross <agross@xxxxxxxxxxxxxx>
- [PATCH 0/3] pinctrl: qcom: Add IPQ8064 pinctrl support
- From: Andy Gross <agross@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform
- From: Nicolin Chen <Guangyu.Chen@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] ASoC: fsl_sai: Add clock controls for SAI
- From: Nicolin Chen <Guangyu.Chen@xxxxxxxxxxxxx>
- [PATCHv2 1/8] ARM: EXYNOS: Add Exynos3250 SoC ID
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- [PATCHv2 0/8] Support new Exynos3250 SoC based on Cortex-A7 dual core
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- [PATCHv2 2/8] ARM: EXYNOS: Add IO mapping for non-secure SYSRAM of Exynos3250
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- [PATCHv2 5/8] ARM: EXYNOS: Support secondary CPU boot of Exynos3250
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- [PATCHv2 6/8] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- [PATCHv2 4/8] ARM: EXYNOS: Support secondary CPU boot of Exynos4212
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- [PATCHv2 7/8] clk: samsung: exynos3250: Add clocks using common clock framework
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- [PATCHv2 8/8] ARM: dts: Add device tree sources for Exynos3250
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [alsa-devel] [PATCH RFC v2 0/2] Fix simple-card *-master DT parameter handling
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxx>
- Re: [PATCH] Configure FSL eSPI CSBEF, CSAFT, and whether to send all received data to user
- From: Insop Song <insop.song@xxxxxxxxxxxxx>
- Re: [PATCH] Configure FSL eSPI CSBEF, CSAFT, and whether to send all received data to user
- From: Insop Song <insop.song@xxxxxxxxxxxxx>
- Re: [PATCH] Configure FSL eSPI CSBEF, CSAFT, and whether to send all received data to user
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: Re: [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/9] ARM: shmobile: r8a7790: add dma defines for sys and audio dmacs
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH 2/4] ALSA: sound/atmel-ac97c.h: Remove unused flags from platform data
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] ALSA: sound/atmel/ac97c.c: Convert to module_platform_driver
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: Re: Device tree support for Atmel AC97 controller on AT91SAM9263
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 5/6] ARM: shmobile: r8a7740: drop address cells from GIC node
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH v2 6/6] ARM: shmobile: sh73a0: drop address cells from GIC node
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH v2 1/4] reset: add driver for socfpga
- From: Dinh Nguyen <dinh.linux@xxxxxxxxx>
- Re: [PATCH v2 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver
- From: Iyappan Subramanian <isubramanian@xxxxxxx>
- Re: [PATCH v2 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver
- From: Iyappan Subramanian <isubramanian@xxxxxxx>
- Re: [PATCH v2 4/4] drivers: net: Add APM X-Gene SoC ethernet driver support.
- From: Iyappan Subramanian <isubramanian@xxxxxxx>
- Re: [PATCH v2 2/9] ARM: shmobile: r8a7790: add dma defines for sys and audio dmacs
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2 8/9] DMA: shdma: initial of common code
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] Configure FSL eSPI CSBEF, CSAFT, and whether to send all received data to user
- From: Insop Song <insop.song@xxxxxxxxxxxxx>
- [PATCH] dts: socfpga: Add DTS entries for USB
- From: <dinguyen@xxxxxxxxxx>
- [PATCH v2 9/9] DMA: shdma: wire r8a7790
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH v2 7/9] ARM: shmobile: lager: enable sysdma units 0 and 1
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH v2 8/9] DMA: shdma: initial of common code
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH v2 6/9] ARM: shmobile: r8a7790: add audio dmac node
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH v2 5/9] ARM: shmobile: add Audio DMAC clocks
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH v2 3/9] ARM: shmobile: r8a7790: add dmac0 dmac1 nodes
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH v2 4/9] ARM: shmobile: r8a7790: Add DMA for MMCIF1
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH v2 2/9] ARM: shmobile: r8a7790: add dma defines for sys and audio dmacs
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Updates Renesas OF-DMA code
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH v2 1/9] ARM: shmobile: r8a7790: add dmac0,dmac1 clocks
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: Questions about of/base.c:of_update_property()
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH 1/4] regulator: s2mps11: Move DTS parsing code to separate function
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/4] regulator: s2mps11: Add external GPIO control for S2MPS14
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 3/4] Documentation: regulator: s2mps11: Document external GPIO control
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 4/4] regulator: s5m8767: Use same binding for external control as in s2mps11
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 1/2] ASoC: fsl_sai: Add clock controls for SAI
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: Append clock bindings for sai2 on VF610 platform
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v4 1/2] SPI: Add driver for Cadence SPI controller
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 3/4] regulator: bcm590xx: add support for regulators on secondary i2c slave
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 2/2] ARM: dts: AM4372: add l3-noc information
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 1/2] ARM: dts: DRA7: Use dra7-l3-noc instead of omap4-l3-noc
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 0/2] ARM: dts: DRA7/AM4372: add l3_noc information
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 2/4] mfd: bcm590xx: add support for second i2c slave address space
- From: Matt Porter <mporter@xxxxxxxxxx>
- [PATCH 4/4] ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators
- From: Matt Porter <mporter@xxxxxxxxxx>
- [PATCH 3/4] regulator: bcm590xx: add support for regulators on secondary i2c slave
- From: Matt Porter <mporter@xxxxxxxxxx>
- [PATCH 1/4] mfd: bcm590xx: update binding with additional BCM59056 regulators
- From: Matt Porter <mporter@xxxxxxxxxx>
- [PATCH 0/4] Support additional regulators on BCM590xx
- From: Matt Porter <mporter@xxxxxxxxxx>
- Re: [PATCH v2 2/5] Power: reset: add bindings for keystone reset driver
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: Re: Device tree support for Atmel AC97 controller on AT91SAM9263
- From: Alexander Stein <alexanders83@xxxxxx>
- Re: Re: Device tree support for Atmel AC97 controller on AT91SAM9263
- From: Alexander Stein <alexanders83@xxxxxx>
- [PATCH v2 1/6] gpio: rcar: Add optional functional clock to bindings
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v2] rtc: Fix suspend/resume for APM X-Gene SoC RTC driver
- From: Loc Ho <lho@xxxxxxx>
- Re: [rtc-linux] [PATCH] rtc: Fix suspend/resume for APM X-Gene SoC RTC driver
- From: Loc Ho <lho@xxxxxxx>
- [PATCH v2 2/5] Power: reset: add bindings for keystone reset driver
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- [PATCH v2 1/5] Power: reset: keystone-reset: introduce keystone reset driver
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- [PATCH] spi: core: Ignore unsupported Dual/Quad Transfer Mode bits
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v2 5/5] ARM: keystone: enable reset driver support
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- [PATCH v2 3/5] ARM: keystone: remove redundant reset stuff
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- [PATCH v2 0/5] Introduce keystone reset driver
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- [PATCH v2 4/5] ARM: dts: keystone: update reset node to work with reset driver
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- Re: [rtc-linux] [PATCH] rtc: Fix suspend/resume for APM X-Gene SoC RTC driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH] clk: Improve clock-indices binding documentation
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH 13/15] bus: omap_l3_noc: introduce concept of submodule
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 01/15] bus: omap_l3_noc: Fix copyright information
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 09/15] bus: omap_l3_noc: rename functions and data to omap_l3
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 02/15] bus: omap_l3_noc: switch over to relaxed variants of readl/writel
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 07/15] bus: omap_l3_noc: populate l3->dev and use it
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 03/15] bus: omap_l3_noc: un-obfuscate l3_targ address computation
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 12/15] bus: omap_l3_noc: convert flagmux information into a structure
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 10/15] bus: omap_l3_noc: remove iclk from omap_l3 struct
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 04/15] bus: omap_l3_noc: move L3 master data structure out
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 15/15] bus: omap_l3_noc: Add AM4372 interconnect error data
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 05/15] bus: omap_l3_noc: convert target information into a structure
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 00/15] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 11/15] bus: omap_l3_noc: use of_match_data to pick up SoC information
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 14/15] bus: omap_l3_noc: Add DRA7 interconnect error data
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 02/15] bus: omap_l3_noc: switched over to relaxed variants of readl/writel
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 08/15] bus: omap_l3_noc: Add support for discountinous flag mux input numbers
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 06/15] bus: omap_l3_noc: make error reporting and handling common.
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 02/15] bus: omap_l3_noc: switched over to relaxed variants of readl/writel
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 3/6] ARM: dts: zynq: drop address cells from GIC node
- From: Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
- Re: [PATCH] tty/serial: atmel_serial: Fix device tree documentation
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- [PATCH] tty/serial: atmel_serial: Fix device tree documentation
- From: Richard Genoud <richard.genoud@xxxxxxxxx>
- Re: [PATCH v2 0/4] Allow to specify an ECC scheme through DT
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- [PATCH v2 1/6] ARM: dts: keystone: drop address and size cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 2/6] ARM: dts: highbank,ecx-2000: drop address and size cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 5/6] ARM: shmobile: r8a7740: drop address cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 4/6] ARM: dts: ste-dbx: drop address cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 3/6] ARM: dts: zynq: drop address cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 6/6] ARM: shmobile: sh73a0: drop address cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [GIT PULL] ARM: Updates for mmci driver for 3.16, take 1
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] DMA: add a driver for AMBA AXI NBPF DMAC IP cores
- From: "Shevchenko, Andriy" <andriy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 4/4] drivers: net: Add APM X-Gene SoC ethernet driver support.
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH 5/5] arm: exynos: Add MCPM call-back functions
- From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
- Re: [PATCH/RFC v3 1/5] leds: Add sysfs and kernel internal API for flash LEDs
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH 3/5] ARM: EXYNOS5420: Add IO mapping for non-secure SYSRAM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- Re: [PATCH v2 0/4] net: Add APM X-Gene SoC Ethernet driver support
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH v2 0/4] net: Add APM X-Gene SoC Ethernet driver support
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [RFC PATCH v2 9/9] ARM: DT: qcom: Add Qualcomm crypto driver binding document
- From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
- Re: [PATCH 3/6] ARM: dts: zynq: drop address cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [RFC PATCH v2 1/9] crypto: qce: Add core driver implementation
- From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
- [RFC PATCH v2 0/9] Add Qualcomm crypto driver
- From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
- [PATCH 2/4] ARM: dts: exynos4: add exynos_usbphy node
- From: Chanho Park <chanho61.park@xxxxxxxxxxx>
- [PATCH 3/4] ARM: dts: exynos4: add hsotg device node
- From: Chanho Park <chanho61.park@xxxxxxxxxxx>
- [PATCH 4/4] ARM: dts: exynos4412-trats2: enable usb nodes
- From: Chanho Park <chanho61.park@xxxxxxxxxxx>
- [PATCH 1/4] ARM: dts: exynos4: add PMU syscon node
- From: Chanho Park <chanho61.park@xxxxxxxxxxx>
- [PATCH 0/4] Enable usbphy and hsotg for exynos4
- From: Chanho Park <chanho61.park@xxxxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
- Re: [PATCH v8 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC
- From: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>
- Re: [PATCH 3/5] ARM: EXYNOS5420: Add IO mapping for non-secure SYSRAM
- From: Dave Martin <Dave.Martin@xxxxxxx>
- [PATCH v2 00/13] extcon: major rework
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v2 01/13] Documentation: add extcon devicetree bindings
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v2 02/13] Documentation: update charger-manager devicetree bindings
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 03/13] extcon: extcon-class: remove extcon_set_cable_state() function
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v2 04/13] extcon: extcon-class: match extcon device by devicetree node
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- Re: [PATCH 3/5] ARM: EXYNOS5420: Add IO mapping for non-secure SYSRAM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH v2 05/13] extcon: extcon-class: improve extcon client API
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v2 06/13] extcon: extcon-class: remove unused functions
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v2 07/13] extcon: extcon-class: improve get_cable_state_()/set_cable_state_() functions
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v2 08/13] extcon: extcon-class: simplify extcon_updata_state() function
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v2 09/13] extcon: extcon-class: move example to Documentation
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v2 12/13] extcon: extcon-max8997: check if pdata exists
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v2 11/13] extcon: extcon-adc-jack: add devicetree support
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v2 13/13] extcon: extcon-max77693: check if pdata exists
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v2 10/13] extcon: extcon-gpio: add devicetree support
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- Re: [PATCH 3/5] ARM: EXYNOS5420: Add IO mapping for non-secure SYSRAM
- From: Dave Martin <Dave.Martin@xxxxxxx>
- Re: [PATCH v8 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v4 2/2] reset: Add GPIO support to reset controller framework
- From: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Srikanth Thokala <sriku.linux@xxxxxxxxx>
- Re: [PATCH 5/5] arm: exynos: Add MCPM call-back functions
- From: Dave Martin <Dave.Martin@xxxxxxx>
- Re: [PATCH 0/4] ARM: sunxi: dt: Misc. fixes
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [alsa-devel] [PATCH RFC v2 0/2] Fix simple-card *-master DT parameter handling
- From: Jyri Sarha <jsarha@xxxxxx>
- Re: [PATCH 4/4] ARM: at91: move sam9x5 SoCs to the CCF
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] SPI: Add driver for Cadence SPI controller
- From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
- Re: [PATCH 3/4] ARM: at91/dt: define sam9x5ek's crystal frequencies
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] ARM: at91/dt: define sam9x5 clocks
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH v4 2/2] devicetree: Add devicetree bindings documentation for Cadence SPI
- From: Harini Katakam <harinik@xxxxxxxxxx>
- [PATCHv2 2/2] iio: devicetree: Add DT binding documentation for Exynos3250 ADC
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCH 2/4] ARM: at91/dt: define sam9n12 clocks
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCHv2 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- [PATCHv2 0/2] iio: adc: exynos_adc: Support Exynos3250 ADC
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- [PATCH v4 1/2] SPI: Add driver for Cadence SPI controller
- From: Harini Katakam <harinik@xxxxxxxxxx>
- Re: [PATCH 1/4] ARM: at91: prepare common clk transition for sam9x5 SoCs
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] ARM: at91/dt: define sam9n12ek crystal frequencies
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: at91: move sam9n12 SoC to the CCF
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: at91: prepare common clk transition for sam9n12 SoC
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] ARM: at91/dt: define sam9n12 clocks
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH 0/4] ARM: at91: move sam9x5 SoCs and boards to the CCF
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 4/4] ARM: at91: move sam9x5 SoCs to the CCF
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/4] ARM: at91/dt: define sam9x5 clocks
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/4] ARM: at91: prepare common clk transition for sam9x5 SoCs
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 3/4] ARM: at91/dt: define sam9x5ek's crystal frequencies
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: Device tree support for Atmel AC97 controller on AT91SAM9263
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: Device tree support for Atmel AC97 controller on AT91SAM9263
- From: Bo Shen <voice.shen@xxxxxxxxx>
- [PATCH v4 2/2] reset: Add GPIO support to reset controller framework
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- [PATCH v4 1/2] Documentation: Add GPIO reset binding to reset binding documentation
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- Re: [PATCH 1/9] crypto: qce: Add core driver implementation
- From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
- [PATCH 0/4] ARM: at91: move sam9n12 SoC and boards to the CCF
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/4] ARM: at91: prepare common clk transition for sam9n12 SoC
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 4/4] ARM: at91: move sam9n12 SoC to the CCF
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 3/4] ARM: at91/dt: define sam9n12ek crystal frequencies
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/4] ARM: at91/dt: define sam9n12 clocks
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/4] regulator: s2mps11: Move DTS parsing code to separate function
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [PATCH 3/4] Documentation: regulator: s2mps11: Document external GPIO control
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- [PATCH 0/4] regulator: s2mps11: Add external GPIO control for S2MPS14
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [PATCH 2/4] regulator: s2mps11: Add external GPIO control for S2MPS14
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [PATCH 4/4] regulator: s5m8767: Use same binding for external control as in s2mps11
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [PATCH 1/1] ARM: dts: omap5: Add clocks to USB3 PHY node
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v8 2/3] clk: exynos5410: register clocks using common clock framework
- From: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>
- [PATCH v8 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC
- From: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>
- [PATCH v8 3/3] ARM: dts: Add initial device tree support for EXYNOS5410
- From: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>
- [PATCH v8 0/3] Exynos 5410 support
- From: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>
- [PATCH 8/9] drm/exynos: fix comment to exynos_drm_device_subdrv_prove call
- From: Inki Dae <inki.dae@xxxxxxxxxxx>
- [PATCH 9/9] drm/exynos: modify goto labels to meaningful names
- From: Inki Dae <inki.dae@xxxxxxxxxxx>
- [PATCH 3/9] ARM: dts: exynos4210-universal: add super device node for exynos drm
- From: Inki Dae <inki.dae@xxxxxxxxxxx>
- [PATCH 5/9] ARM: dts: exynos4412-trats2: add super device node for exynos drm
- From: Inki Dae <inki.dae@xxxxxxxxxxx>
- [PATCH v2 7/9] drm/exynos: separate dpi from fimd
- From: Inki Dae <inki.dae@xxxxxxxxxxx>
- [PATCH 4/9] ARM: dts: exynos4210-trats: add super device node for exynos drm
- From: Inki Dae <inki.dae@xxxxxxxxxxx>
- [PATCH 6/9] exynos/drm: add DT bindings
- From: Inki Dae <inki.dae@xxxxxxxxxxx>
- [PATCH v5 1/9] drm/exynos: add super device support
- From: Inki Dae <inki.dae@xxxxxxxxxxx>
- [PATCH 2/9] drm/exynos: dpi: fix hotplug fail issue
- From: Inki Dae <inki.dae@xxxxxxxxxxx>
- [PATCH v3 0/9] drm/exynos: more cleanup with super device support
- From: Inki Dae <inki.dae@xxxxxxxxxxx>
- Re: [PATCH v3] phy: Renesas R-Car Gen2 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [alsa-devel] [PATCH RFC v2 0/2] Fix simple-card *-master DT parameter handling
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxx>
- Re: [PATCH 3/4] ARM: dts: imx6: use of_clk_get_by_name() to retrieve fixed-clock
- From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
- Re: [PATCH 4/6] ARM: dts: vybrid: drop address and size cells from GIC node
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH 6/6] ARM: dts: sh: drop address cells from GIC node
- From: Simon Horman <horms@xxxxxxxxxxxx>
- [PATCH 4/6] iio: st_sensors: add device tree bindings
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] ARM: vexpress: Add CPU clock frequencies to TC1 device tree
- From: Francesco Lavra <francescolavra.fl@xxxxxxxxx>
- [PATCH 4/4] ARM: sun7i: dt: Add address- and size-cells info to i2c controller nodes
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 3/4] ARM: sun5i: dt: Add address- and size-cells info to i2c controller nodes
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 2/4] ARM: sun4i: dt: Add address- and size-cells info to i2c controller nodes
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 1/4] ARM: sun6i: dt: Fixup prcm node name
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 0/4] ARM: sunxi: dt: Misc. fixes
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: Re: [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support
- From: Alexander Stein <alexanders83@xxxxxx>
- Re: [PATCH BUGFIX] arm: dts: imx53: fix apparent copy/paste error
- From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
- Re: [PATCH v4 1/7] drivers: input: keyboard: st-keyscan: add keyscan driver
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 4/4] drivers: net: Add APM X-Gene SoC ethernet driver support.
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH] mmc: add a driver for the Renesas v08r07s01e SD/SDIO host controller
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- [PATCH] DMA: add a driver for AMBA AXI NBPF DMAC IP cores
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH] serial: uart: add hw flow control support configuration
- From: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re: Re: [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support
- From: Alexander Stein <alexanders83@xxxxxx>
- Re: [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH 2/4] ALSA: sound/atmel-ac97c.h: Remove unused flags from platform data
- From: Alexander Stein <alexanders83@xxxxxx>
- [PATCH 4/4] ARM: at91/dt: sam9263: Add ac97 device node
- From: Alexander Stein <alexanders83@xxxxxx>
- Device tree support for Atmel AC97 controller on AT91SAM9263
- From: Alexander Stein <alexanders83@xxxxxx>
- [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support
- From: Alexander Stein <alexanders83@xxxxxx>
- [PATCH 1/4] ALSA: sound/atmel/ac97c.c: Convert to module_platform_driver
- From: Alexander Stein <alexanders83@xxxxxx>
- [PATCH v2 3/3] video: clps711x: Add bindings documentation for CLPS711X framebuffer
- From: Alexander Shiyan <shc_work@xxxxxxx>
- [PATCH v2 2/2] ASoC: cirrus: clps711x: Add bindings documentation for the CLPS711X DAI
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re: [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH v2 4/4] drivers: net: Add APM X-Gene SoC ethernet driver support.
- From: Iyappan Subramanian <isubramanian@xxxxxxx>
- [PATCH v2 1/4] MAINTAINERS: Add entry for APM X-Gene SoC ethernet driver
- From: Iyappan Subramanian <isubramanian@xxxxxxx>
- [PATCH v2 3/4] dts: Add bindings for APM X-Gene SoC ethernet driver
- From: Iyappan Subramanian <isubramanian@xxxxxxx>
- [PATCH v2 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver
- From: Iyappan Subramanian <isubramanian@xxxxxxx>
- [PATCH v2 0/4] net: Add APM X-Gene SoC Ethernet driver support
- From: Iyappan Subramanian <isubramanian@xxxxxxx>
- [PATCH v3] phy: Renesas R-Car Gen2 PHY driver
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH] rtc: Fix suspend/resume for APM X-Gene SoC RTC driver
- From: Loc Ho <lho@xxxxxxx>
- Re: [PATCH] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC
- From: 최찬우 <cwchoi00@xxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 5/5] arm: exynos: Add MCPM call-back functions
- From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
- Re: [PATCH 2/5] arm64: dts: APM X-Gene SoC Ethernet device tree nodes
- From: Iyappan Subramanian <isubramanian@xxxxxxx>
- Re: [PATCH v2 1/5] ARM: zynq: DT: Add 'clock-latency' property
- From: Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
- [PATCH] serial: uart: add hw flow control support configuration
- From: Murali Karicheri <m-karicheri2@xxxxxx>
- Re: [PATCH 2/5] drivers/bus: arm-cci: Add common control interface for ACE ports
- From: Abhilash Kesavan <kesavan.abhilash@xxxxxxxxx>
- Re: [PATCH 2/5] drivers/bus: arm-cci: Add common control interface for ACE ports
- From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
- Re: [PATCH V3 2/6] ARM: AM43xx: fix dpll init in bypass mode
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 1/5] ARM: bL_switcher: Don't enable bL switcher on systems without CCI
- From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
- [PATCH 5/5] arm: exynos: Add MCPM call-back functions
- From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
- [PATCH 4/5] ARM: dts: exynos5420: add CCI node
- From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
- [PATCH 3/5] ARM: EXYNOS5420: Add IO mapping for non-secure SYSRAM
- From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
- [PATCH 2/5] drivers/bus: arm-cci: Add common control interface for ACE ports
- From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
- [PATCH 1/5] ARM: bL_switcher: Don't enable bL switcher on systems without CCI
- From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
- [PATCH 0/5] MCPM backend for Exynos5420
- From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
- Re: [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible
- From: Srikanth Thokala <sriku.linux@xxxxxxxxx>
- Re: [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH 1/6] ARM: dts: keystone: drop address and size cells from GIC node
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 3/6] ARM: dts: zynq: drop address cells from GIC node
- From: Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
- [PATCH] pinctrl/TB10x: Fix signedness bug
- From: Christian Ruppert <christian.ruppert@xxxxxxxxxx>
- [PATCH v4 1/7] drivers: input: keyboard: st-keyscan: add keyscan driver
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v4 5/7] ARM: STi: DT: add keyscan for stih416
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v4 2/7] driver: reset: sti: add keyscan for stih415
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v4 6/7] ARM: STi: DT: add keyscan for stih41x-b2000
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v4 7/7] ARM: multi_v7_defconfig: add ST Keyscan driver
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v4 0/7] Add ST Keyscan driver
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v4 3/7] driver: reset: sti: add keyscan for stih416
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v4 4/7] ARM: STi: DT: add keyscan for stih415
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- Re: [PATCH v2] axs_nand - add driver for NAND controller used on Synopsys AXS dev boards
- From: "ezequiel.garcia@xxxxxxxxxxxxxxxxxx" <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 0/7] Add ST Keyscan driver
- From: Gabriel Fernandez <gabriel.fernandez@xxxxxxxxxx>
- [PATCH/RFC v3 2/5] leds: Improve and export led_update_brightness function
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- [PATCH 3/6] ARM: dts: zynq: drop address cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 6/6] ARM: dts: sh: drop address cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 5/6] ARM: dts: ste-dbx: drop address cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 1/6] ARM: dts: keystone: drop address and size cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 2/6] ARM: dts: highbank,ecx-2000: drop address and size cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 4/6] ARM: dts: vybrid: drop address and size cells from GIC node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH/RFC v3 1/5] leds: Add sysfs and kernel internal API for flash LEDs
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- [PATCH/RFC v3 3/5] leds: Add support for max77693 mfd flash cell
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- [PATCH/RFC v3 4/5] DT: Add documentation for the mfd Maxim max77693 flash cell
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- [PATCH/RFC v3 5/5] media: Add registration helpers for V4L2 flash sub-devices
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- [PATCH/RFC v3 0/5] LED / flash API integration
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH v2] axs_nand - add driver for NAND controller used on Synopsys AXS dev boards
- From: Alexey Brodkin <Alexey.Brodkin@xxxxxxxxxxxx>
- [PATCH v3 4/7] ARM: STi: DT: add keyscan for stih41x-b2000
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- Re: [PATCH 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller
- From: Thor Thayer <tthayer@xxxxxxxxxx>
- [PATCH v3 7/7] ARM: multi_v7_defconfig: add ST Keyscan driver
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v3 7/7] driver: reset: sti: add keyscan for stih416
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v3 2/7] ARM: STi: DT: add keyscan for stih415
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v3 2/7] driver: reset: sti: add keyscan for stih415
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v3 6/7] driver: reset: sti: add keyscan for stih415
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v3 5/7] ARM: STi: DT: add keyscan for stih416
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v3 6/7] ARM: STi: DT: add keyscan for stih41x-b2000
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v3 3/7] ARM: STi: DT: add keyscan for stih416
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v3 3/7] driver: reset: sti: add keyscan for stih416
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v3 1/7] drivers: input: keyboard: st-keyscan: add keyscan driver
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v3 4/7] ARM: STi: DT: add keyscan for stih415
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- Re: [PATCH 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller
- From: Thor Thayer <tthayer@xxxxxxxxxx>
- [PATCH v3 5/7] ARM: multi_v7_defconfig: add ST Keyscan driver
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- [PATCH v3 0/7] Add ST Keyscan driver
- From: Gabriel FERNANDEZ <gabriel.fernandez@xxxxxx>
- Re: [PATCH 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller
- From: Thor Thayer <tthayer@xxxxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 1/2] ARM: dt-binding: fix GIC example
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH RESEND 2/5] pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: dt-binding: fix GIC example
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: dt-binding: fix GIC example
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH v2 0/3] Add initial support of PMU for exynos5260
- From: Vikas Sajjan <sajjan.linux@xxxxxxxxx>
- Re: [RFC PATCH] edac: add support for ARM PL310 L2 cache parity
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH v3 6/7] pinctrl: sunxi: add reset control support
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/7] pinctrl: sunxi: check clk_prepare_enable return value
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/7] pinctrl: sunxi: disable clk when failing to probe pin controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH RFC v5 2/2] clk: Add handling of clk parent and rate assigned from DT
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH RESEND 2/5] pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH RFC v5 2/2] clk: Add handling of clk parent and rate assigned from DT
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- Re: [PATCH v2] phy: Renesas R-Car Gen2 PHY driver
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH 0/2] Add support for sii9234 chip
- From: Tomasz Stanislawski <t.stanislaws@xxxxxxxxxxx>
- [PATCH 1/2] misc: add sii9234 driver
- From: Tomasz Stanislawski <t.stanislaws@xxxxxxxxxxx>
- [PATCH 2/2] arm: dts: trats2: add SiI9234 node
- From: Tomasz Stanislawski <t.stanislaws@xxxxxxxxxxx>
- Re: [PATCH] ARM: shmobile: r8a7790: link PCI USb devices to USB PHY
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: dt-binding: fix GIC example
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- Re: [PATCH v2] Documentation: dt: Reduce fragmentation of <..> placeholders
- From: Florian Vaussard <florian.vaussard@xxxxxxx>
- Re: [PATCH v4 2/3] rtc: Add APM X-Gene SoC RTC driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH RESEND 2/5] pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH RESEND 1/5] pinctrl: allows not to define the get_group_pins operation
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- Re: [PATCH 1/4] clocksource: Add support for the Mediatek SoCs
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Liviu Dudau <Liviu.Dudau@xxxxxxx>
- Re: [PATCH RESEND 5/5] ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH RESEND 4/5] Documentation: add the Marvell Berlin pinctrl documentation
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- Re: [PATCH RESEND 5/5] ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] clocksource: Add support for the Mediatek SoCs
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [PATCH RESEND 3/5] ARM: berlin: add the pinctrl dependency for the Marvell Berlin SoCs
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- Re: [PATCH RESEND 2/5] pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- Re: [PATCH 3/4] ARM: dts: imx6: use of_clk_get_by_name() to retrieve fixed-clock
- From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH RESEND 2/5] pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- Re: [PATCH RESEND 4/5] Documentation: add the Marvell Berlin pinctrl documentation
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH RESEND 5/5] ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH RESEND 4/5] Documentation: add the Marvell Berlin pinctrl documentation
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- Re: [PATCH RESEND 2/5] pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH RESEND 4/5] Documentation: add the Marvell Berlin pinctrl documentation
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH 4/4] ARM: dts: imx6: use generic name for fixed-clock nodes
- From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
- [PATCH 3/4] ARM: dts: imx6: use of_clk_get_by_name() to retrieve fixed-clock
- From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
- [PATCH 2/4] ARM: dts: imx6: define input clocks to CCM block
- From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
- [PATCH 1/4] ARM: dts: imx: add required #clock-cells for fixed-clock
- From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
- [PATCH 0/4] ARM: imx6: cleanup for fixed-clock
- From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
- Re: [PATCH v5 5/8 fix] mtd: m25p80: use the SPI nor framework
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 1/2] GPIO: Add driver for Zynq GPIO controller
- From: Michal Simek <monstr@xxxxxxxxx>
- Re: [PATCH RESEND 2/5] pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- Re: [PATCH RESEND 4/5] Documentation: add the Marvell Berlin pinctrl documentation
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- Re: [PATCH] ARM: shmobile: r8a7790: link PCI USb devices to USB PHY
- From: Magnus Damm <magnus.damm@xxxxxxxxx>
- Re: [RFC PATCH 1/2] drivers: mfd: Add support of exynos-pmu driver
- From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/3] rtc: Add APM X-Gene SoC RTC driver
- From: Loc Ho <lho@xxxxxxx>
- Re: [PATCH v3 1/2] SPI: Add driver for Cadence SPI controller
- From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
- Re: [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Questions about of/base.c:of_update_property()
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: dt-binding: fix GIC example
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH v5 5/8 fix] mtd: m25p80: use the SPI nor framework
- From: Huang Shijie <shijie8@xxxxxxxxx>
- Re: [PATCH v2] Documentation: dt: Reduce fragmentation of <..> placeholders
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH] ARM: topology: Make it clear that all CPUs need to be described
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH 4/6] v4l: vsp1: Add DT support
- From: Simon Horman <horms@xxxxxxxxxxxx>
- [PATCH 08/11] ARM: dts: Fix omap serial wake-up when booted with device tree
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 4/6] v4l: vsp1: Add DT support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [rtc-linux] [PATCH v2 2/3] rtc: Add APM X-Gene SoC RTC driver
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] ARM: topology: Make it clear that all CPUs need to be described
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 4/6] v4l: vsp1: Add DT support
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH] DT: add vendor prefix for EBV Elektronik
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH] ARM: topology: Make it clear that all CPUs need to be described
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH v3 1/2] SPI: Add driver for Cadence SPI controller
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v4 2/3] rtc: Add APM X-Gene SoC RTC driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v6] ASoC: fsl_sai: Add clock controls for SAI
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 04/15] pinctrl: sunxi: specify clk name when retrieving pinctrl pio clk
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2] phy: Renesas R-Car Gen2 PHY driver
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 0/8] mtd: spi-nor: add a new framework for SPI NOR
- From: Brian Norris <computersforpeace@xxxxxxxxx>
- Re: [PATCH v5 5/8 fix] mtd: m25p80: use the SPI nor framework
- From: Brian Norris <computersforpeace@xxxxxxxxx>
- [PATCH v4 3/3] arm64: Add APM X-Gene SoC RTC DTS entry
- From: Loc Ho <lho@xxxxxxx>
- [PATCH v4 2/3] rtc: Add APM X-Gene SoC RTC driver
- From: Loc Ho <lho@xxxxxxx>
- [PATCH v4 1/3] Documentation: Add documentation for the APM X-Gene SoC RTC DTS binding
- From: Loc Ho <lho@xxxxxxx>
- [PATCH v4 0/3] rtc: Add APM X-Gene SoC RTC driver
- From: Loc Ho <lho@xxxxxxx>
- Re: [PATCH] ARM: shmobile: r8a7790: link PCI USb devices to USB PHY
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 04/15] pinctrl: sunxi: specify clk name when retrieving pinctrl pio clk
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 04/15] pinctrl: sunxi: specify clk name when retrieving pinctrl pio clk
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 05/13] extcon: extcon-class: improve extcon client API
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH v3 1/3] pinctrl: Rename Broadcom Capri pinctrl driver
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: [PATCH v3 2/3] Update bcm_defconfig with new pinctrl CONFIG
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: [PATCH 1/2] GPIO: Add driver for Zynq GPIO controller
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/2] GPIO: Add driver for Zynq GPIO controller
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 1/3] pinctrl: Rename Broadcom Capri pinctrl driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 1/3] pinctrl: Rename Broadcom Capri pinctrl driver
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: [PATCH v3 1/3] pinctrl: Rename Broadcom Capri pinctrl driver
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: [PATCH v3 1/3] pinctrl: Rename Broadcom Capri pinctrl driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 1/3] pinctrl: Rename Broadcom Capri pinctrl driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: MSM8974: Add pinctrl node
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 4/4] pinctrl: msm: Add definitions for the APQ8064 platform
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 3/4] pinctrl: msm: Add documentation for pinctrl-apq8064 binding
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/4] pinctrl: msm: Make number of functions variable
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: msm: Correct interrupt code for TLMM v2
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH RFC v5 2/2] clk: Add handling of clk parent and rate assigned from DT
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH] DT: add vendor prefix for EBV Elektronik
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH v6] ASoC: fsl_sai: Add clock controls for SAI
- From: Nicolin Chen <Guangyu.Chen@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: dt-binding: fix GIC example
- From: Rob Herring <robherring2@xxxxxxxxx>
- [PATCH v6] ASoC: fsl_sai: Add clock controls for SAI
- From: Nicolin Chen <Guangyu.Chen@xxxxxxxxxxxxx>
- Re: [PATCH v3 2/3] devcietree: bindings: add some MFD Keymile FPGAs
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH v5] ASoC: fsl_sai: Add clock controls for SAI
- From: Nicolin Chen <Guangyu.Chen@xxxxxxxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Liviu Dudau <Liviu.Dudau@xxxxxxx>
- Re: [PATCH] of: add vendor prefix for I2SE GmbH
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH] dt-bindings: add vendor-prefix for Newhaven Display
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v5] ASoC: fsl_sai: Add clock controls for SAI
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH v3 3/7] pinctrl: sunxi: add PL and PM pin definitions
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 1/7] pinctrl: sunxi: check clk_prepare_enable return value
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 6/7] pinctrl: sunxi: add reset control support
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 4/7] pinctrl: sunxi: support multiple pin controller
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 5/7] pinctrl: sunxi: define A31 R_PIO pin functions
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 2/7] pinctrl: sunxi: disable clk when failing to probe pin controller
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 7/7] ARM: sunxi: update the default ARCH_NR_GPIO for sunxi arch
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 0/7] ARM: sunxi: add multi pin controller support
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- [PATCH v2] checkpatch: fix wildcard DT compatible string checking
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH 1/1] of: add vendor prefix for ISEE 2007 S.L.
- From: Rob Herring <robherring2@xxxxxxxxx>
- [PATCH 00/13] extcon: major rework
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH 01/13] Documentation: add extcon devicetree bindings
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH 02/13] Documentation: update charger-manager devicetree bindings
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH 03/13] extcon: extcon-class: remove extcon_set_cable_state() function
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH 05/13] extcon: extcon-class: improve extcon client API
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH 04/13] extcon: extcon-class: match extcon device by devicetree node
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework
- From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
- [PATCH 07/13] extcon: extcon-class: improve get_cable_state_()/set_cable_state_() functions
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH 08/13] extcon: extcon-class: simplify extcon_updata_state() function
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH 09/13] extcon: extcon-class: move example to Documentation
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH 10/13] extcon: extcon-gpio: add devicetree support
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH 11/13] extcon: extcon-adc-jack: add devicetree support
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH 12/13] extcon: extcon-max8997: check if pdata exists
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH 13/13] extcon: extcon-max77693: check if pdata exists
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH 06/13] extcon: extcon-class: remove unused functions
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH RESEND 4/5] Documentation: add the Marvell Berlin pinctrl documentation
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 5/5] ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 1/5] pinctrl: allows not to define the get_group_pins operation
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 2/5] pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 3/5] ARM: berlin: add the pinctrl dependency for the Marvell Berlin SoCs
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 0/5] ARM: berlin: add pinctrl support
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/5] pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 5/5] ARM: sunxi: update the default ARCH_NR_GPIO for sunxi arch
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 4/5] pinctrl: sunxi: add reset control support
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/5] pinctrl: allows not to define the get_group_pins operation
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH 4/5] Documentation: add the Marvell Berlin pinctrl documentation
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH 3/5] ARM: berlin: add the pinctrl dependency for the Marvell Berlin SoCs
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH 5/5] ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH 0/5] ARM: berlin: add pinctrl support
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/5] pinctrl: sunxi: define A31 R_PIO pin functions
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v12 1/4] thermal: samsung: replace inten_ bit fields with intclr_
- From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
- Re: [PATCH v2 2/5] pinctrl: sunxi: support multiple pin controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] pinctrl: sunxi: add PL and PM pin definitions
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 4/5] pinctrl: sunxi: add reset control support
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 5/5] ARM: sunxi: update the default ARCH_NR_GPIO for sunxi arch
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/5] pinctrl: sunxi: add PL and PM pin definitions
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 2/5] pinctrl: sunxi: support multiple pin controller
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH V3 00/19] mmc: mmci: Improve DT support
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH v2 3/5] pinctrl: sunxi: define A31 R_PIO pin functions
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 0/5] ARM: sunxi: add multi pin controller support
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] SPI: Add driver for Cadence SPI controller
- From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
- Re: [PATCH v3 1/2] SPI: Add driver for Cadence SPI controller
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH V3 19/19] mmc: mmci: Enforce max frequency configuration through DT
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 18/19] mmc: mmci: Enforce DMA configuration through DT
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 17/19] mmc: mmci: Enforce mmc capabilities through DT
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 16/19] mmc: mmci: Enforce DT for signal direction and feedback clock
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 15/19] ARM: ux500: Remove redundant board file for mmci platform data
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 14/19] ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 13/19] ARM: ux500: Add the mmc capabilities flags to DT
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 12/19] mmc: mmci: Enable MMC_CAP_CMD23
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 11/19] mmc: mmci: Mark the DT bindings for highspeed mode as deprecated
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 10/19] ARM: u300: Convert to the common mmc DT bindings for highspeed mode
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 09/19] ARM: nomadik: Convert to the common mmc DT bindings for highspeed mode
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 08/19] ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 07/19] ARM: ux500: Add mmci signal directions and feeback clock in DT for href
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 06/19] mmc: mmci: Use the common mmc DT parser
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 05/19] mmc: mmci: Add DT bindings for feedback clock pin
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 04/19] mmc: mmci: Add DT bindings for signal direction
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 03/19] mmc: mmci: Update DT documentation
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 02/19] mmc: mmci: Convert to devm functions
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 01/19] mmc: mmci: Convert to the mmc gpio API
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 00/19] mmc: mmci: Improve DT support
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH v3 2/2] devicetree: Add devicetree bindings documentation for Cadence SPI
- From: Harini Katakam <harinik@xxxxxxxxxx>
- [PATCH v3 1/2] SPI: Add driver for Cadence SPI controller
- From: Harini Katakam <harinik@xxxxxxxxxx>
- Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- [PATCH v5] ASoC: fsl_sai: Add clock controls for SAI
- From: Nicolin Chen <Guangyu.Chen@xxxxxxxxxxxxx>
- Re: [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off
- From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
- Re: [PATCH v2 2/5] ARM: zynq: dt: Convert to preprocessor includes
- From: Michal Simek <monstr@xxxxxxxxx>
- Re: [PATCH] ARM: shmobile: r8a7790: link PCI USb devices to USB PHY
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- Re: [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller
- From: Michal Simek <michal.simek@xxxxxxxxxx>
- Re: [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller
- From: Michal Simek <michal.simek@xxxxxxxxxx>
- Re: [RFC PATCH] edac: add support for ARM PL310 L2 cache parity
- From: Michal Simek <monstr@xxxxxxxxx>
- Re: [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH v2] phy: Renesas R-Car Gen2 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH 00/15] ARM: sunxi: add A31 PL pins support
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller
- From: Michal Simek <michal.simek@xxxxxxxxxx>
- Re: [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards
- From: Heiko Stübner <heiko.stuebner@xxxxxx>
- Re: [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [RFC PATCH] edac: add support for ARM PL310 L2 cache parity
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- Re: [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] of: add vendor prefix for ISEE 2007 S.L.
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [PATCH 4/4] arm: mediatek: Add earlyprintk support for MT6589
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- [PATCH v2 1/4] reset: add driver for socfpga
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v2 4/4] ARM: socfpga: dts: add reset-controller
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v2 3/4] Documentation: dt: reset: move socfpga-reset
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v2 2/4] Documentation: dt: socfpga: add reset-cells property
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH v5 3/8] mtd: spi-nor: add the framework for SPI NOR
- From: Huang Shijie <b32955@xxxxxxxxxxxxx>
- Re: [PATCH 00/15] ARM: sunxi: add A31 PL pins support
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 5/8 fix] mtd: m25p80: use the SPI nor framework
- From: Huang Shijie <b32955@xxxxxxxxxxxxx>
- Re: [PATCH 00/15] ARM: sunxi: add A31 PL pins support
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH BUGFIX] arm: dts: imx53: fix apparent copy/paste error
- From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v4] ASoC: fsl_sai: Add clock controls for SAI
- From: Nicolin Chen <Guangyu.Chen@xxxxxxxxxxxxx>
- Re: [PATCH v5 0/8] mtd: spi-nor: add a new framework for SPI NOR
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- RE: [PATCH v4] ASoC: fsl_sai: Add clock controls for SAI
- From: "Li.Xiubo@xxxxxxxxxxxxx" <Li.Xiubo@xxxxxxxxxxxxx>
- Re: [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] ARM: shmobile: r8a7790: link PCI USb devices to USB PHY
- From: Magnus Damm <magnus.damm@xxxxxxxxx>
- Re: [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [RFC PATCH] edac: add support for ARM PL310 L2 cache parity
- From: Michal Simek <monstr@xxxxxxxxx>
- Re: [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller
- From: Michal Simek <monstr@xxxxxxxxx>
- Re: [PATCH 2/2] ALSA: hda - Add driver for Tegra SoC HDA
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- Re: [PATCH 2/2] ALSA: hda - Add driver for Tegra SoC HDA
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- [PATCH v2 2/2] ALSA: hda - Add driver for Tegra SoC HDA
- From: Dylan Reid <dgreid@xxxxxxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]
