This commit adds the necessary definitions for the PHY layer to recognize "qsgmii" as a valid PHY interface. A QSMII interface, as defined at http://en.wikipedia.org/wiki/Media_Independent_Interface#Quad_Serial_Gigabit_Media_Independent_Interface, is "is a method of combining four SGMII lines into a 5Gbit/s interface. QSGMII, like SGMII, uses LVDS signalling for the TX and RX data and a single LVDS clock signal. QSGMII uses significantly fewer signal lines than four SGMII busses." This type of MAC <-> PHY connection might require special handling on the MAC driver side, so it should be possible to express this type of MAC <-> PHY connection, for example in the Device Tree. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx --- Documentation/devicetree/bindings/net/ethernet.txt | 2 +- include/linux/phy.h | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index 9ecd43d..3fc3605 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -10,7 +10,7 @@ The following properties are common to the Ethernet controllers: - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in ePAPR). - phy-mode: string, operation mode of the PHY interface; supported values are - "mii", "gmii", "sgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", + "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii"; this is now a de-facto standard property; - phy-connection-type: the same as "phy-mode" property but described in ePAPR; diff --git a/include/linux/phy.h b/include/linux/phy.h index 24126c4..4d0221f 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -75,6 +75,7 @@ typedef enum { PHY_INTERFACE_MODE_SMII, PHY_INTERFACE_MODE_XGMII, PHY_INTERFACE_MODE_MOCA, + PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_MAX, } phy_interface_t; @@ -116,6 +117,8 @@ static inline const char *phy_modes(phy_interface_t interface) return "xgmii"; case PHY_INTERFACE_MODE_MOCA: return "moca"; + case PHY_INTERFACE_MODE_QSGMII: + return "qsgmii"; default: return "unknown"; } -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html