From: Pratyush Anand <pratyush.anand@xxxxxx> SPEAr1310 and SPEAr1340 SOC uses designware PCIe controller. Add SPEAr13xx PCIe driver based on designware controller driver. SPEAr1310 has 3 PCIe ports and SPEAr1340 has 1, which are multiplexed with ahci/sata pins. By default evaluation board of both controller works for ahci mode. To use these patches on SPEAr1340/1310 evaluation board, do the necessary modifications on board and enable (okay) pcie and miphy from respective evb dtsi file. Add Mohit Kumar as maintainer for ST SPEAr13xx PCIe driver. Signed-off-by: Pratyush Anand <pratyush.anand@xxxxxx> Signed-off-by: Mohit Kumar <mohit.kumar@xxxxxx> Acked-by: Arnd Bergmann <arnd@xxxxxxxx> Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Acked-by: Jingoo Han <jg1.han@xxxxxxxxxxx> Cc: Viresh Kumar <viresh.linux@xxxxxxxxx> Cc: spear-devel@xxxxxxxxxxx Cc: linux-pci@xxxxxxxxxxxxxxx --- MAINTAINERS | 6 + arch/arm/boot/dts/spear1310.dtsi | 6 + arch/arm/boot/dts/spear1340.dtsi | 2 + arch/arm/boot/dts/spear13xx.dtsi | 4 +- arch/arm/mach-spear/Kconfig | 1 + drivers/pci/host/Kconfig | 8 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pcie-spear13xx.c | 407 +++++++++++++++++++++++++++++++++++++ 8 files changed, 433 insertions(+), 2 deletions(-) create mode 100644 drivers/pci/host/pcie-spear13xx.c diff --git a/MAINTAINERS b/MAINTAINERS index 2421c8d..574218f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6734,6 +6734,12 @@ L: linux-pci@xxxxxxxxxxxxxxx S: Maintained F: drivers/pci/host/*designware* +PCIE DRIVER FOR ST SPEAR13XX +M: Mohit Kumar <mohit.kumar@xxxxxx> +L: linux-pci@xxxxxxxxxxxxxxx +S: Maintained +F: drivers/pci/host/pcie-spear13xx.c + PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: linux-pcmcia@xxxxxxxxxxxxxxxxxxx diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 53f73a2..77bebae 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -90,6 +90,8 @@ interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 0 68 0x4>; num-lanes = <1>; + phys = <&miphy0 1>; + phy-names = "pcie-phy"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -106,6 +108,8 @@ interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 0 69 0x4>; num-lanes = <1>; + phys = <&miphy1 1>; + phy-names = "pcie-phy"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -122,6 +126,8 @@ interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 0 70 0x4>; num-lanes = <1>; + phys = <&miphy2 1>; + phy-names = "pcie-phy"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index bc492f5..0d8fe32 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -55,6 +55,8 @@ interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 0 68 0x4>; num-lanes = <1>; + phys = <&miphy0 1>; + phy-names = "pcie-phy"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 3a72508..a6eb543 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -83,8 +83,8 @@ #size-cells = <1>; compatible = "simple-bus"; ranges = <0x50000000 0x50000000 0x10000000 - 0xb0000000 0xb0000000 0x10000000 - 0xd0000000 0xd0000000 0x02000000 + 0x80000000 0x80000000 0x20000000 + 0xb0000000 0xb0000000 0x22000000 0xd8000000 0xd8000000 0x01000000 0xe0000000 0xe0000000 0x10000000>; diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index ce1e70f..b44dd1a 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -21,6 +21,7 @@ config ARCH_SPEAR13XX select HAVE_ARM_TWD if SMP select PINCTRL select MFD_SYSCON + select MIGHT_HAVE_PCI help Supports for ARM's SPEAR13XX family diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index a6f67ec..5fd1098 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -33,4 +33,12 @@ config PCI_RCAR_GEN2 There are 3 internal PCI controllers available with a single built-in EHCI/OHCI host controller present on each one. +config PCIE_SPEAR13XX + tristate "STMicroelectronics SPEAr PCIe controller" + depends on ARCH_SPEAR13XX + select PCIEPORTBUS + select PCIE_DW + help + Say Y here if you want PCIe support on SPEAr13XX SoCs. + endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 13fb333..42a491d 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o +obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o diff --git a/drivers/pci/host/pcie-spear13xx.c b/drivers/pci/host/pcie-spear13xx.c new file mode 100644 index 0000000..47e8e91 --- /dev/null +++ b/drivers/pci/host/pcie-spear13xx.c @@ -0,0 +1,407 @@ +/* + * PCIe host controller driver for ST Microelectronics SPEAr13xx SoCs + * + * SPEAr13xx PCIe Glue Layer Source Code + * + * Copyright (C) 2010-2014 ST Microelectronics + * Pratyush Anand <pratyush.anand@xxxxxx> + * Mohit Kumar <mohit.kumar@xxxxxx> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pci.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/resource.h> + +#include "pcie-designware.h" + +struct spear13xx_pcie { + void __iomem *app_base; + struct phy *phy; + struct clk *clk; + struct pcie_port pp; + bool is_gen1; +}; + +struct pcie_app_reg { + u32 app_ctrl_0; /* cr0 */ + u32 app_ctrl_1; /* cr1 */ + u32 app_status_0; /* cr2 */ + u32 app_status_1; /* cr3 */ + u32 msg_status; /* cr4 */ + u32 msg_payload; /* cr5 */ + u32 int_sts; /* cr6 */ + u32 int_clr; /* cr7 */ + u32 int_mask; /* cr8 */ + u32 mst_bmisc; /* cr9 */ + u32 phy_ctrl; /* cr10 */ + u32 phy_status; /* cr11 */ + u32 cxpl_debug_info_0; /* cr12 */ + u32 cxpl_debug_info_1; /* cr13 */ + u32 ven_msg_ctrl_0; /* cr14 */ + u32 ven_msg_ctrl_1; /* cr15 */ + u32 ven_msg_data_0; /* cr16 */ + u32 ven_msg_data_1; /* cr17 */ + u32 ven_msi_0; /* cr18 */ + u32 ven_msi_1; /* cr19 */ + u32 mst_rmisc; /* cr20 */ +}; + +/* CR0 ID */ +#define RX_LANE_FLIP_EN_ID 0 +#define TX_LANE_FLIP_EN_ID 1 +#define SYS_AUX_PWR_DET_ID 2 +#define APP_LTSSM_ENABLE_ID 3 +#define SYS_ATTEN_BUTTON_PRESSED_ID 4 +#define SYS_MRL_SENSOR_STATE_ID 5 +#define SYS_PWR_FAULT_DET_ID 6 +#define SYS_MRL_SENSOR_CHGED_ID 7 +#define SYS_PRE_DET_CHGED_ID 8 +#define SYS_CMD_CPLED_INT_ID 9 +#define APP_INIT_RST_0_ID 11 +#define APP_REQ_ENTR_L1_ID 12 +#define APP_READY_ENTR_L23_ID 13 +#define APP_REQ_EXIT_L1_ID 14 +#define DEVICE_TYPE_EP (0 << 25) +#define DEVICE_TYPE_LEP (1 << 25) +#define DEVICE_TYPE_RC (4 << 25) +#define SYS_INT_ID 29 +#define MISCTRL_EN_ID 30 +#define REG_TRANSLATION_ENABLE 31 + +/* CR1 ID */ +#define APPS_PM_XMT_TURNOFF_ID 2 +#define APPS_PM_XMT_PME_ID 5 + +/* CR3 ID */ +#define XMLH_LTSSM_STATE_DETECT_QUIET 0x00 +#define XMLH_LTSSM_STATE_DETECT_ACT 0x01 +#define XMLH_LTSSM_STATE_POLL_ACTIVE 0x02 +#define XMLH_LTSSM_STATE_POLL_COMPLIANCE 0x03 +#define XMLH_LTSSM_STATE_POLL_CONFIG 0x04 +#define XMLH_LTSSM_STATE_PRE_DETECT_QUIET 0x05 +#define XMLH_LTSSM_STATE_DETECT_WAIT 0x06 +#define XMLH_LTSSM_STATE_CFG_LINKWD_START 0x07 +#define XMLH_LTSSM_STATE_CFG_LINKWD_ACEPT 0x08 +#define XMLH_LTSSM_STATE_CFG_LANENUM_WAIT 0x09 +#define XMLH_LTSSM_STATE_CFG_LANENUM_ACEPT 0x0A +#define XMLH_LTSSM_STATE_CFG_COMPLETE 0x0B +#define XMLH_LTSSM_STATE_CFG_IDLE 0x0C +#define XMLH_LTSSM_STATE_RCVRY_LOCK 0x0D +#define XMLH_LTSSM_STATE_RCVRY_SPEED 0x0E +#define XMLH_LTSSM_STATE_RCVRY_RCVRCFG 0x0F +#define XMLH_LTSSM_STATE_RCVRY_IDLE 0x10 +#define XMLH_LTSSM_STATE_L0 0x11 +#define XMLH_LTSSM_STATE_L0S 0x12 +#define XMLH_LTSSM_STATE_L123_SEND_EIDLE 0x13 +#define XMLH_LTSSM_STATE_L1_IDLE 0x14 +#define XMLH_LTSSM_STATE_L2_IDLE 0x15 +#define XMLH_LTSSM_STATE_L2_WAKE 0x16 +#define XMLH_LTSSM_STATE_DISABLED_ENTRY 0x17 +#define XMLH_LTSSM_STATE_DISABLED_IDLE 0x18 +#define XMLH_LTSSM_STATE_DISABLED 0x19 +#define XMLH_LTSSM_STATE_LPBK_ENTRY 0x1A +#define XMLH_LTSSM_STATE_LPBK_ACTIVE 0x1B +#define XMLH_LTSSM_STATE_LPBK_EXIT 0x1C +#define XMLH_LTSSM_STATE_LPBK_EXIT_TIMEOUT 0x1D +#define XMLH_LTSSM_STATE_HOT_RESET_ENTRY 0x1E +#define XMLH_LTSSM_STATE_HOT_RESET 0x1F +#define XMLH_LTSSM_STATE_MASK 0x3F +#define XMLH_LINK_UP (1 << 6) + +/* CR4 ID */ +#define CFG_MSI_EN_ID 18 + +/* CR6 */ +#define INTA_CTRL_INT (1 << 7) +#define INTB_CTRL_INT (1 << 8) +#define INTC_CTRL_INT (1 << 9) +#define INTD_CTRL_INT (1 << 10) +#define MSI_CTRL_INT (1 << 26) + +/* CR19 ID */ +#define VEN_MSI_REQ_ID 11 +#define VEN_MSI_FUN_NUM_ID 8 +#define VEN_MSI_TC_ID 5 +#define VEN_MSI_VECTOR_ID 0 +#define VEN_MSI_REQ_EN ((u32)0x1 << VEN_MSI_REQ_ID) +#define VEN_MSI_FUN_NUM_MASK ((u32)0x7 << VEN_MSI_FUN_NUM_ID) +#define VEN_MSI_TC_MASK ((u32)0x7 << VEN_MSI_TC_ID) +#define VEN_MSI_VECTOR_MASK ((u32)0x1F << VEN_MSI_VECTOR_ID) + +#define PCI_CAP_ID_EXP_OFFSET 0x70 + +#define to_spear13xx_pcie(x) container_of(x, struct spear13xx_pcie, pp) + +static int spear13xx_pcie_establish_link(struct pcie_port *pp) +{ + u32 val; + int count = 0; + struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp); + struct pcie_app_reg *app_reg = spear13xx_pcie->app_base; + u32 exp_cap_off = PCI_CAP_ID_EXP_OFFSET; + + if (dw_pcie_link_up(pp)) { + dev_err(pp->dev, "link already up\n"); + return 0; + } + + dw_pcie_setup_rc(pp); + + /* + * this controller support only 128 bytes read size, however its + * default value in capability register is 512 bytes. So force + * it to 128 here. + */ + dw_pcie_cfg_read(pp->dbi_base, exp_cap_off + PCI_EXP_DEVCTL, 4, &val); + val &= ~PCI_EXP_DEVCTL_READRQ; + dw_pcie_cfg_write(pp->dbi_base, exp_cap_off + PCI_EXP_DEVCTL, 4, val); + + dw_pcie_cfg_write(pp->dbi_base, PCI_VENDOR_ID, 2, 0x104A); + dw_pcie_cfg_write(pp->dbi_base, PCI_DEVICE_ID, 2, 0xCD80); + + /* + * if is_gen1 is set then handle it, so that some buggy card + * also works + */ + if (spear13xx_pcie->is_gen1) { + dw_pcie_cfg_read(pp->dbi_base, exp_cap_off + PCI_EXP_LNKCAP, 4, + &val); + if ((val & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB) { + val &= ~((u32)PCI_EXP_LNKCAP_SLS); + val |= PCI_EXP_LNKCAP_SLS_2_5GB; + dw_pcie_cfg_write(pp->dbi_base, exp_cap_off + + PCI_EXP_LNKCAP, 4, val); + } + + dw_pcie_cfg_read(pp->dbi_base, exp_cap_off + PCI_EXP_LNKCTL2, + 4, &val); + if ((val & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB) { + val &= ~((u32)PCI_EXP_LNKCAP_SLS); + val |= PCI_EXP_LNKCAP_SLS_2_5GB; + dw_pcie_cfg_write(pp->dbi_base, exp_cap_off + + PCI_EXP_LNKCTL2, 4, val); + } + } + + /* enable ltssm */ + writel(DEVICE_TYPE_RC | (1 << MISCTRL_EN_ID) + | (1 << APP_LTSSM_ENABLE_ID) + | ((u32)1 << REG_TRANSLATION_ENABLE), + &app_reg->app_ctrl_0); + + /* check if the link is up or not */ + while (!dw_pcie_link_up(pp)) { + mdelay(100); + count++; + if (count == 10) { + dev_err(pp->dev, "link Fail\n"); + return -EINVAL; + } + } + dev_info(pp->dev, "link up\n"); + + return 0; +} + +static irqreturn_t spear13xx_pcie_irq_handler(int irq, void *arg) +{ + struct pcie_port *pp = arg; + struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp); + struct pcie_app_reg *app_reg = spear13xx_pcie->app_base; + unsigned int status; + + status = readl(&app_reg->int_sts); + + if (status & MSI_CTRL_INT) { + if (!IS_ENABLED(CONFIG_PCI_MSI)) + BUG(); + dw_handle_msi_irq(pp); + } + + writel(status, &app_reg->int_clr); + + return IRQ_HANDLED; +} + +static void spear13xx_pcie_enable_interrupts(struct pcie_port *pp) +{ + struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp); + struct pcie_app_reg *app_reg = spear13xx_pcie->app_base; + + /* Enable MSI interrupt */ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + dw_pcie_msi_init(pp); + writel(readl(&app_reg->int_mask) | + MSI_CTRL_INT, &app_reg->int_mask); + } +} + +static int spear13xx_pcie_link_up(struct pcie_port *pp) +{ + struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp); + struct pcie_app_reg *app_reg = spear13xx_pcie->app_base; + + if (readl(&app_reg->app_status_1) & XMLH_LINK_UP) + return 1; + + return 0; +} + +static void spear13xx_pcie_host_init(struct pcie_port *pp) +{ + spear13xx_pcie_establish_link(pp); + spear13xx_pcie_enable_interrupts(pp); +} + +static struct pcie_host_ops spear13xx_pcie_host_ops = { + .link_up = spear13xx_pcie_link_up, + .host_init = spear13xx_pcie_host_init, +}; + +static int add_pcie_port(struct pcie_port *pp, struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int ret; + + pp->irq = platform_get_irq(pdev, 0); + if (!pp->irq) { + dev_err(dev, "failed to get irq\n"); + return -ENODEV; + } + ret = devm_request_irq(dev, pp->irq, spear13xx_pcie_irq_handler, + IRQF_SHARED, "spear1340-pcie", pp); + if (ret) { + dev_err(dev, "failed to request irq %d\n", pp->irq); + return ret; + } + + pp->root_bus_nr = -1; + pp->ops = &spear13xx_pcie_host_ops; + + spin_lock_init(&pp->conf_lock); + ret = dw_pcie_host_init(pp); + if (ret) { + dev_err(dev, "failed to initialize host\n"); + return ret; + } + + return 0; +} + +static int __init spear13xx_pcie_probe(struct platform_device *pdev) +{ + struct spear13xx_pcie *spear13xx_pcie; + struct pcie_port *pp; + struct device *dev = &pdev->dev; + struct device_node *np = pdev->dev.of_node; + struct resource *dbi_base; + int ret; + + spear13xx_pcie = devm_kzalloc(dev, sizeof(*spear13xx_pcie), + GFP_KERNEL); + if (!spear13xx_pcie) { + dev_err(dev, "no memory for SPEAr13xx pcie\n"); + return -ENOMEM; + } + + spear13xx_pcie->phy = devm_phy_get(dev, "pcie-phy"); + if (IS_ERR(spear13xx_pcie->phy)) { + ret = PTR_ERR(spear13xx_pcie->phy); + if (ret == -EPROBE_DEFER) + dev_info(dev, "probe deferred\n"); + else + dev_err(dev, "couldn't get pcie-phy\n"); + return ret; + } + + phy_init(spear13xx_pcie->phy); + + spear13xx_pcie->clk = devm_clk_get(dev, NULL); + if (IS_ERR(spear13xx_pcie->clk)) { + dev_err(dev, "couldn't get clk for pcie\n"); + return PTR_ERR(spear13xx_pcie->clk); + } + ret = clk_prepare_enable(spear13xx_pcie->clk); + if (ret) { + dev_err(dev, "couldn't enable clk for pcie\n"); + return ret; + } + + pp = &spear13xx_pcie->pp; + + pp->dev = dev; + + dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pp->dbi_base = devm_ioremap_resource(dev, dbi_base); + if (IS_ERR(pp->dbi_base)) { + dev_err(dev, "couldn't remap dbi base %p\n", dbi_base); + ret = PTR_ERR(pp->dbi_base); + goto fail_clk; + } + spear13xx_pcie->app_base = pp->dbi_base + 0x2000; + + if (of_property_read_bool(np, "st,pcie-is-gen1")) + spear13xx_pcie->is_gen1 = true; + + ret = add_pcie_port(pp, pdev); + if (ret < 0) + goto fail_clk; + + platform_set_drvdata(pdev, spear13xx_pcie); + return 0; + +fail_clk: + clk_disable_unprepare(spear13xx_pcie->clk); + + return ret; +} + +static int __exit spear13xx_pcie_remove(struct platform_device *pdev) +{ + struct spear13xx_pcie *spear13xx_pcie = platform_get_drvdata(pdev); + + clk_disable_unprepare(spear13xx_pcie->clk); + + phy_exit(spear13xx_pcie->phy); + + return 0; +} + +static const struct of_device_id spear13xx_pcie_of_match[] = { + { .compatible = "st,spear1340-pcie", }, + {}, +}; +MODULE_DEVICE_TABLE(of, spear13xx_pcie_of_match); + +static struct platform_driver spear13xx_pcie_driver = { + .probe = spear13xx_pcie_probe, + .remove = spear13xx_pcie_remove, + .driver = { + .name = "spear-pcie", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(spear13xx_pcie_of_match), + }, +}; + +/* SPEAr13xx PCIe driver does not allow module unload */ + +static int __init pcie_init(void) +{ + return platform_driver_register(&spear13xx_pcie_driver); +} +module_init(pcie_init); + +MODULE_DESCRIPTION("ST Microelectronics SPEAr13xx PCIe host controller driver"); +MODULE_AUTHOR("Pratyush Anand <pratyush.anand@xxxxxx>"); +MODULE_LICENSE("GPL v2"); -- 1.7.0.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html