Step by step, improve the DT support for the mmci host driver.
This enables us to move the final pieces of platform data for mmci for ux500
into DT. We are then able to remove yet another machine specific file for ux500.
This patchset needs to be merged together. I suggest we go through Russell's
ARM tree, since most of the patches are mmci specific which he maintains -
unless someone think there is a better alternative.
I will thus seek acks from the SOC maintainers for the SOC specific patches.
The goal is to queue this for 3.16, thus I might need to rebase the patches for
3.15 rc[n]. Still I would appreciate any comments at this point.
Changes in v3:
- Adopting to review comments from Michal Simek for patch 2.
- Rebased patches and added some acks/reviewed by tags.
Changes in v2:
- Adopting to review comments from Rob Herring and Linus Walleij. More
or less causing each an every patch to be rebased.
- Removed the patch for regulator for the db8500-prcmu from this
patchset, since Mark Brown already queued it for 3.15.
Ulf Hansson (19):
mmc: mmci: Convert to the mmc gpio API
mmc: mmci: Convert to devm functions
mmc: mmci: Update DT documentation
mmc: mmci: Add DT bindings for signal direction
mmc: mmci: Add DT bindings for feedback clock pin
mmc: mmci: Use the common mmc DT parser
ARM: ux500: Add mmci signal directions and feeback clock in DT for
href
ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
ARM: nomadik: Convert to the common mmc DT bindings for highspeed
mode
ARM: u300: Convert to the common mmc DT bindings for highspeed mode
mmc: mmci: Mark the DT bindings for highspeed mode as deprecated
mmc: mmci: Enable MMC_CAP_CMD23
ARM: ux500: Add the mmc capabilities flags to DT
ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for
href
ARM: ux500: Remove redundant board file for mmci platform data
mmc: mmci: Enforce DT for signal direction and feedback clock
mmc: mmci: Enforce mmc capabilities through DT
mmc: mmci: Enforce DMA configuration through DT
mmc: mmci: Enforce max frequency configuration through DT
Documentation/devicetree/bindings/mmc/mmci.txt | 54 ++++-
arch/arm/boot/dts/ste-ccu9540.dts | 6 +-
arch/arm/boot/dts/ste-href.dtsi | 19 +-
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 4 +-
arch/arm/boot/dts/ste-snowball.dts | 4 +-
arch/arm/boot/dts/ste-u300.dts | 4 +-
arch/arm/mach-ux500/Makefile | 3 +-
arch/arm/mach-ux500/board-mop500-sdi.c | 166 ---------------
arch/arm/mach-ux500/board-mop500.h | 5 -
arch/arm/mach-ux500/cpu-db8500.c | 4 -
drivers/mmc/host/mmci.c | 265 +++++++-----------------
drivers/mmc/host/mmci.h | 14 +-
include/linux/amba/mmci.h | 42 ----
13 files changed, 157 insertions(+), 433 deletions(-)
delete mode 100644 arch/arm/mach-ux500/board-mop500-sdi.c
--
1.7.9.5
Ulf Hansson (19):
mmc: mmci: Convert to the mmc gpio API
mmc: mmci: Convert to devm functions
mmc: mmci: Update DT documentation
mmc: mmci: Add DT bindings for signal direction
mmc: mmci: Add DT bindings for feedback clock pin
mmc: mmci: Use the common mmc DT parser
ARM: ux500: Add mmci signal directions and feeback clock in DT for
href
ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
ARM: nomadik: Convert to the common mmc DT bindings for highspeed
mode
ARM: u300: Convert to the common mmc DT bindings for highspeed mode
mmc: mmci: Mark the DT bindings for highspeed mode as deprecated
mmc: mmci: Enable MMC_CAP_CMD23
ARM: ux500: Add the mmc capabilities flags to DT
ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for
href
ARM: ux500: Remove redundant board file for mmci platform data
mmc: mmci: Enforce DT for signal direction and feedback clock
mmc: mmci: Enforce mmc capabilities through DT
mmc: mmci: Enforce DMA configuration through DT
mmc: mmci: Enforce max frequency configuration through DT
Documentation/devicetree/bindings/mmc/mmci.txt | 54 ++++-
arch/arm/boot/dts/ste-ccu9540.dts | 6 +-
arch/arm/boot/dts/ste-href.dtsi | 19 +-
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 4 +-
arch/arm/boot/dts/ste-snowball.dts | 4 +-
arch/arm/boot/dts/ste-u300.dts | 4 +-
arch/arm/mach-ux500/Makefile | 3 +-
arch/arm/mach-ux500/board-mop500-sdi.c | 166 ---------------
arch/arm/mach-ux500/board-mop500.h | 5 -
arch/arm/mach-ux500/cpu-db8500.c | 4 -
drivers/mmc/host/mmci.c | 264 ++++++------------------
drivers/mmc/host/mmci.h | 14 +-
include/linux/amba/mmci.h | 42 ----
13 files changed, 154 insertions(+), 435 deletions(-)
delete mode 100644 arch/arm/mach-ux500/board-mop500-sdi.c
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
