On 15 April 2014 11:17, YoungJun Cho <yj44.cho@xxxxxxxxxxx> wrote:
> This patch adds DT bindings for s6e3fa0 panel.
> The bindings describes panel resources, display timings, delays
> and physical size.
>
> Signed-off-by: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
> Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/panel/samsung,s6e3fa0.txt | 52 ++++++++++++++++++++
> 1 file changed, 52 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt
>
> diff --git a/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt b/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt
> new file mode 100644
> index 0000000..5986899
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt
> @@ -0,0 +1,52 @@
> +Samsung S6E3FA0 AMOLED LCD 5.7 inch panel
> +
> +Required properties:
> + - compatible: "samsung,s6e3fa0"
> + - reg: the virtual channel number of a DSI peripheral
> + - vdd3-supply: core voltage supply
> + - vci-supply: voltage supply for analog circuits
> + - reset-gpio: a GPIO spec for the reset pin
> + - display-timings: timings for the connected panel as described by [1]
> +
> +Optional properties:
> + - power-on-delay: delay after turning regulators on [ms]
> + - reset-delay: delay after reset sequence [ms]
> + - init-delay: delay after initialization sequence [ms]
> + - panel-width-mm: physical panel width [mm]
> + - panel-height-mm: physical panel height [mm]
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in [2]. This
> +node should describe panel's video bus.
> +
> +[1]: Documentation/devicetree/bindings/video/display-timing.txt
> +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> +
> + panel {
How about panel@0?
> + compatible = "samsung,s6e3fa0";
> + reg = <0>;
--
With warm regards,
Sachin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
