libvirt

• Thread Index

• Re: [libvirt-python PATCH v2] setup: require python >= 3.5 to build
  • From: Philipp Hahn
• Re: [libvirt PATCH 1/6] slirp: leave the dbus daemon running on error
  • From: Marc-André Lureau
• [PATCH v2] docs: Document reserved PCI addresses for QEMU
  • From: Michal Privoznik
• Re: [libvirt PATCH 1/6] slirp: leave the dbus daemon running on error
  • From: Michal Privoznik
• Re: [libvirt PATCH] virsh: Fix return code for dump and migrate
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH] CONTRIBUTING: Include information on build dependencies
  • From: Laine Stump
• [libvirt PATCH] virsh: Fix return code for dump and migrate
  • From: Andrea Bolognani
• Re: [PATCH] docs: Document reserved PCI addresses for QEMU
  • From: Laine Stump
• [libvirt PATCH] conf: split out virDomainFeaturesDefParse
  • From: Ján Tomko
• Re: [libvirt PATCH 1/6] slirp: leave the dbus daemon running on error
  • From: Marc-André Lureau
• Re: [PATCH v2 01/40] util: virresctrl: convert classes to GObject
  • From: Jonathon Jongsma
• Re: [libvirt PATCH 1/6] slirp: leave the dbus daemon running on error
  • From: Michal Privoznik
• Re: [PATCH v2 00/40] convert virObjects to GObject
  • From: Jonathon Jongsma
• [PATCH] docs: Document reserved PCI addresses for QEMU
  • From: Michal Privoznik
• Re: [PATCH v2 00/40] convert virObjects to GObject
  • From: Daniel P. Berrangé
• Re: [PATCH v2 00/40] convert virObjects to GObject
  • From: Rafael Fonseca
• Re: [PATCH v2 00/40] convert virObjects to GObject
  • From: Daniel P. Berrangé
• [PATCH v2 25/40] datatypes: convert virStorageVol to GObject
  • From: Rafael Fonseca
• [PATCH v2 00/40] convert virObjects to GObject
  • From: Rafael Fonseca
• [PATCH v2 37/40] qemu: convert virQEMUDriverConfig to GObject
  • From: Rafael Fonseca
• [PATCH v2 40/40] util: convert virStorageSource to GObject
  • From: Rafael Fonseca
• [PATCH v2 27/40] datatypes: convert virSecret to GObject
  • From: Rafael Fonseca
• [PATCH v2 39/40] conf: convert virSaveCookie to GObject
  • From: Rafael Fonseca
• [PATCH v2 33/40] libxl: convert libxlDriverConfig to GObject
  • From: Rafael Fonseca
• [PATCH v2 38/40] conf: convert virDomain*Private to GObject
  • From: Rafael Fonseca
• [PATCH v2 35/40] libxl: convert libxlMigrationDstArgs to GObject
  • From: Rafael Fonseca
• [PATCH v2 29/40] datatypes: convert virDomain to GObject
  • From: Rafael Fonseca
• [PATCH v2 30/40] rpc: gendispatch: use g_autoptr where possible
  • From: Rafael Fonseca
• [PATCH v2 24/40] datatypes: convert virStoragePool to GObject
  • From: Rafael Fonseca
• [PATCH v2 36/40] qemu: convert qemuBlockJobData to GObject
  • From: Rafael Fonseca
• [PATCH v2 28/40] datatypes: convert virStream to GObject
  • From: Rafael Fonseca
• [PATCH v2 21/40] datatypes: convert virNetwork to GObject
  • From: Rafael Fonseca
• [PATCH v2 34/40] hypervisor: convert virHostdevManager to GObject
  • From: Rafael Fonseca
• [PATCH v2 32/40] lxc: convert virLXCDriverConfig to GObject
  • From: Rafael Fonseca
• [PATCH v2 26/40] datatypes: convert virNodeDevice to GObject
  • From: Rafael Fonseca
• [PATCH v2 20/40] datatypes: convert virNWFilterBinding to GObject
  • From: Rafael Fonseca
• [PATCH v2 31/40] conf: convert virNetworkXMLOption to GObject
  • From: Rafael Fonseca
• [PATCH v2 22/40] datatypes: convert virNetworkPort to GObject
  • From: Rafael Fonseca
• [PATCH v2 15/40] admin: convert virAdmServer to GObject
  • From: Rafael Fonseca
• [PATCH v2 19/40] datatypes: convert virNWFilter to GObject
  • From: Rafael Fonseca
• [PATCH v2 23/40] datatypes: convert virInterface to GObject
  • From: Rafael Fonseca
• [PATCH v2 11/40] conf: convert virDomainCapsCPUModels to GObject
  • From: Rafael Fonseca
• [PATCH v2 12/40] util: convert dnsmasqCaps to GObject
  • From: Rafael Fonseca
• [PATCH v2 18/40] datatypes: convert virDomainSnapshot to GObject
  • From: Rafael Fonseca
• [PATCH v2 09/40] bhyve: convert virBhyveDriverConfig to GObject
  • From: Rafael Fonseca
• [PATCH v2 14/40] rpc: gendispatch: prepare for GObject conversion
  • From: Rafael Fonseca
• [PATCH v2 13/40] conf: convert virDomainChrSourceDef to GObject
  • From: Rafael Fonseca
• [PATCH v2 17/40] datatypes: convert virDomainCheckpoint to GObject
  • From: Rafael Fonseca
• [PATCH v2 08/40] bhyve: convert bhyveMonitor to GObject
  • From: Rafael Fonseca
• [PATCH v2 10/40] rpc: convert virNetServerService to GObject
  • From: Rafael Fonseca
• [PATCH v2 16/40] admin: convert virAdmClient to GObject
  • From: Rafael Fonseca
• [PATCH v2 07/40] conf: convert virDomainXMLOption to GObject
  • From: Rafael Fonseca
• [PATCH v2 05/40] rpc: convert virNetClientProgram to GObject
  • From: Rafael Fonseca
• [PATCH v2 04/40] util: add function to unref array of GObjects
  • From: Rafael Fonseca
• [PATCH v2 02/40] conf: capabilities: convert virCaps to GOBject
  • From: Rafael Fonseca
• [PATCH v2 06/40] rpc: convert virNetServerProgram to GObject
  • From: Rafael Fonseca
• [PATCH v2 03/40] qemu: convert virQEMUCaps to GObject
  • From: Rafael Fonseca
• [PATCH v2 01/40] util: virresctrl: convert classes to GObject
  • From: Rafael Fonseca
• Re: [PATCH 20/36] datatypes: convert virNetworkPort to GObject
  • From: Rafael Fonseca
• [PATCH v2 1/5] qemu_capabilities: Introduce QEMU_CAPS_AIO_IO_URING
  • From: Han Han
• [PATCH v2 5/5] news: qemu: support async IO mode 'io_uring'
  • From: Han Han
• [PATCH v2 4/5] tests: Tests for io mode io_uring
  • From: Han Han
• [PATCH v2 3/5] docs: Docs and rng schemas for io_uring
  • From: Han Han
• [PATCH v2 0/5] qemu: spport AIO interface io_uring
  • From: Han Han
• [PATCH v2 2/5] qemu: Implement the aio mode io_uring
  • From: Han Han
• [PATCH v2 2/5] conf: Support to parse rbd namespace attribute
  • From: Han Han
• [PATCH v2 5/5] news: qemu: Support rbd namespace
  • From: Han Han
• [PATCH v2 4/5] doc: rng schemas and html doc for rbd namespace attribute
  • From: Han Han
• [PATCH v2 3/5] qemu: Implement rbd namespace attribute
  • From: Han Han
• [PATCH v2 1/5] qemu_capabilities: Add QEMU_CAPS_RBD_NAMESPACE
  • From: Han Han
• [PATCH v2 0/5] qemu: Support rbd namespace attribute
  • From: Han Han
• RE: [PATCH v5 0/4] introduction of migration_version attribute for VFIO live migration
  • From: Tian, Kevin
• Re: [RFC 00/29] RFC: Generate object-model code based on relax-ng files
  • From: Daniel P. Berrangé
• Re: [PATCH 0/5] Xen: Add support for xl.cfg passthrough setting
  • From: Michal Privoznik
• Re: [libvirt PATCH v3 3/5] add virQEMUCapsProbeQMPTCGState function to set QEMU_CAPS_TCG_DISABLED
  • From: Peter Krempa
• Re: [libvirt PATCH v3 5/5] Add second qom-list-types call to test data.
  • From: Peter Krempa
• [libvirt PATCH v3 5/5] Add second qom-list-types call to test data.
  • From: Tobin Feldman-Fitzthum
• Re: [libvirt-ci PATCH v2] Fix comment about not building libvirt-tck on CentOS
  • From: Michal Privoznik
• [libvirt-ci PATCH v2] Fix comment about not building libvirt-tck on CentOS
  • From: Andrea Bolognani
• [PATCH v2 1/2] conf: Add <lease/> option for <dhcp/> settings
  • From: Julio Faracco
• [PATCH v2 2/2] tests: Add tests for <lease/> to cover dnsmasq settings
  • From: Julio Faracco
• [PATCH v2 0/2] Include lease time option into DHCP settings
  • From: Julio Faracco
• Re: [PATCH v5 0/4] introduction of migration_version attribute for VFIO live migration
  • From: Yan Zhao
• Re: [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: Zhenyu Zheng
• Re: [PATCH v5 0/4] introduction of migration_version attribute for VFIO live migration
  • From: Alex Williamson
• Re: [PATCH libvirt v1 0/6] Fix ZPCI address auto-generation on s390
  • From: Boris Fiuczynski
• [libvirt PATCH v3 4/5] use new functions when probing
  • From: Tobin Feldman-Fitzthum
• [libvirt PATCH v3 3/5] add virQEMUCapsProbeQMPTCGState function to set QEMU_CAPS_TCG_DISABLED
  • From: Tobin Feldman-Fitzthum
• [libvirt PATCH v3 0/5] QEMU: support QEMU built without TCG
  • From: Tobin Feldman-Fitzthum
• [libvirt PATCH v3 1/5] add QEMU_CAPS_TCG_DISABLED and probe conditionally
  • From: Tobin Feldman-Fitzthum
• [libvirt PATCH v3 2/5] add virQEMUCapsGetVirtType convenience function
  • From: Tobin Feldman-Fitzthum
• Re: [PATCH 2/2] Avoid unnecessary error messages handling udev events
  • From: Mark Asselstine
• Re: [libvirt-ci PATCH 1/2] mappings: Add libssh2 and wireshark on CentOS
  • From: Daniel P. Berrangé
• Re: [libvirt-ci PATCH 2/2] Build libvirt-tck on CentOS 8
  • From: Andrea Bolognani
• Re: [libvirt-ci PATCH 2/2] Build libvirt-tck on CentOS 8
  • From: Daniel P. Berrangé
• Re: [libvirt-ci PATCH 2/2] Build libvirt-tck on CentOS 8
  • From: Andrea Bolognani
• Re: [PATCH 1/3] udevRemoveOneDevice: Unlock node device obj upon return
  • From: Ján Tomko
• Re: [libvirt PATCH] README: Add GitLab CI badge
  • From: Ján Tomko
• Re: [libvirt PATCH] CONTRIBUTING: Include in release archives
  • From: Ján Tomko
• Re: [PATCH 2/2] Avoid unnecessary error messages handling udev events
  • From: Mark Asselstine
• Re: [libvirt PATCH] README: Add GitLab CI badge
  • From: Andrea Bolognani
• Re: [libvirt PATCH] CONTRIBUTING: Include in release archives
  • From: Andrea Bolognani
• Re: [PATCH 2/2] Avoid unnecessary error messages handling udev events
  • From: Michal Privoznik
• [PATCH 3/3] udevHandleOneDevice: Remove old instance of device on "move"
  • From: Michal Privoznik
• [PATCH 1/3] udevRemoveOneDevice: Unlock node device obj upon return
  • From: Michal Privoznik
• [PATCH 0/3] udevHandleOneDevice: Remove old instance of device on "move"
  • From: Michal Privoznik
• [PATCH 2/3] node_device_udev: Split udevRemoveOneDevice() into two
  • From: Michal Privoznik
• Re: [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: Jiri Denemark
• [libvirt-python PATCH v2] setup: require python >= 3.5 to build
  • From: Daniel P. Berrangé
• Re: [PATCH 2/2] Avoid unnecessary error messages handling udev events
  • From: Mark Asselstine
• Re: [PATCH 2/2] Avoid unnecessary error messages handling udev events
  • From: Michal Privoznik
• Re: [libvirt-python PATCH] setup: require python >= 3.5 to build
  • From: Philipp Hahn
• Re: [PATCH 2/2] Avoid unnecessary error messages handling udev events
  • From: Mark Asselstine
• Re: [PATCH v2] doc/python: Update to Python 3
  • From: Daniel P. Berrangé
• Re: [libvirt-ci PATCH 2/2] Build libvirt-tck on CentOS 8
  • From: Daniel P. Berrangé
• Re: [libvirt-python PATCH] setup: require python >= 3.5 to build
  • From: Daniel P. Berrangé
• [PATCH v2] doc/python: Update to Python 3
  • From: Philipp Hahn
• [libvirt-ci PATCH 1/2] mappings: Add libssh2 and wireshark on CentOS
  • From: Andrea Bolognani
• [libvirt-ci PATCH 2/2] Build libvirt-tck on CentOS 8
  • From: Andrea Bolognani
• [libvirt-ci PATCH 0/2] Improve CentOS coverage
  • From: Andrea Bolognani
• Re: [libvirt-python PATCH] setup: require python >= 3.5 to build
  • From: Philipp Hahn
• Re: [python] WIP-FYI: mypy annotations for libvirt-python and cleanup for generator.py
  • From: Daniel P. Berrangé
• [libvirt-python PATCH] setup: require python >= 3.5 to build
  • From: Daniel P. Berrangé
• Re: [PATCH 4/4] docs: Docs and news for io mode io_uring
  • From: Han Han
• Re: [PATCH libvirt-python] examples: Fix connection error handling
  • From: Daniel P. Berrangé
• Re: [PATCH] doc/python: Update to Python 3
  • From: Daniel P. Berrangé
• Re: [libvirt-ci PATCH] lcitool: Don't set root shell
  • From: Daniel P. Berrangé
• [libvirt-ci PATCH] lcitool: Don't set root shell
  • From: Andrea Bolognani
• [libvirt PATCH] CONTRIBUTING: Include information on build dependencies
  • From: Andrea Bolognani
• [libvirt-ci PATCH 2/2] Move MinGW builds back to Fedora Rawhide
  • From: Andrea Bolognani
• [libvirt-ci PATCH 1/2] lcitool: Prepare Fedora Rawhide for MinGW builds
  • From: Andrea Bolognani
• [libvirt-ci PATCH 0/2] Move MinGW builds back to Fedora Rawhide
  • From: Andrea Bolognani
• Re: [PATCH 2/2] Avoid unnecessary error messages handling udev events
  • From: Michal Privoznik
• Re: [PATCH 1/2] node_device_udev: handle move events
  • From: Michal Privoznik
• Re: [libvirt PATCH 00/10] vbox: update to support newer versions and drop eol versions
  • From: Michal Privoznik
• Re: [PATCH 3/3] virnetdev.c: Use g_auto*()
  • From: Ján Tomko
• Re: [PATCH 0/2] Include lease time option into DHCP settings
  • From: Daniel P. Berrangé
• Re: [PATCH 2/3] virNetDevSwitchdevFeature: Make failure to get 'family_id' non-fatal
  • From: Ján Tomko
• Re: [PATCH 1/3] virNetDevGetFamilyId: Change signature
  • From: Ján Tomko
• Re: [PATCH 4/4] docs: Docs and news for io mode io_uring
  • From: Peter Krempa
• Re: [PATCH 3/4] tests: Tests for io mode io_uring
  • From: Peter Krempa
• Re: [PATCH 2/4] qemu: Implement the aio mode io_uring
  • From: Peter Krempa
• Re: [PATCH 1/4] qemu_capabilities: Introduce QEMU_CAPS_AIO_IO_URING
  • From: Peter Krempa
• [libvirt-ci PATCH] README: Fix "maintainance" typo
  • From: Erik Skultety
• [PATCH 2/3] virNetDevSwitchdevFeature: Make failure to get 'family_id' non-fatal
  • From: Michal Privoznik
• [PATCH 3/3] virnetdev.c: Use g_auto*()
  • From: Michal Privoznik
• [PATCH 1/3] virNetDevGetFamilyId: Change signature
  • From: Michal Privoznik
• [PATCH 0/3] Enable net devices in node-dev driver again
  • From: Michal Privoznik
• [PATCH libvirt-python] examples: Fix connection error handling
  • From: Philipp Hahn
• [PATCH] doc/python: Update to Python 3
  • From: Philipp Hahn
• Re: [python] WIP-FYI: mypy annotations for libvirt-python and cleanup for generator.py
  • From: Philipp Hahn
• Re: [PATCH v5 0/4] introduction of migration_version attribute for VFIO live migration
  • From: Yan Zhao
• Re: [PATCH 0/2] Include lease time option into DHCP settings
  • From: Laine Stump
• Re: [PATCH] Add 'permissive' option for PCI devices
  • From: Laine Stump
• Re: [PATCH 1/2] node_device_udev: handle move events
  • From: Mark Asselstine
• [PATCH 4/4] docs: Docs and news for io mode io_uring
  • From: Han Han
• [PATCH 1/4] qemu_capabilities: Introduce QEMU_CAPS_AIO_IO_URING
  • From: Han Han
• [PATCH 2/4] qemu: Implement the aio mode io_uring
  • From: Han Han
• [PATCH 0/4] Support new qemu aio interface io_uring
  • From: Han Han
• [PATCH 3/4] tests: Tests for io mode io_uring
  • From: Han Han
• Re: [PATCH 1/2] node_device_udev: handle move events
  • From: Martin Kletzander
• [PATCH 5/5] tests: check conversion of passthrough hypervisor feature
  • From: Jim Fehlig
• [PATCH 0/5] Xen: Add support for xl.cfg passthrough setting
  • From: Jim Fehlig
• [PATCH 2/5] libxl: make use of passthrough hypervisor feature
  • From: Jim Fehlig
• [PATCH 4/5] xenconfig: Add support for 'passthrough' hypervisor feature
  • From: Jim Fehlig
• [PATCH 3/5] libxl: refactor cpu and hypervisor feature parser/formatter
  • From: Jim Fehlig
• [PATCH 1/5] conf: add xen hypervisor feature 'passthrough'
  • From: Jim Fehlig
• [libvirt PATCH] util: Do not include sys/wait.h on Win32
  • From: Jiri Denemark
• [PATCH] Add 'permissive' option for PCI devices
  • From: Marek Marczykowski-Górecki
• Re: [PATCH 0/2] Include lease time option into DHCP settings
  • From: Daniel P. Berrangé
• Re: [PATCH 1/2] conf: Add <leasetime/> option for <dhcp/> settings
  • From: Daniel P. Berrangé
• Re: [PATCH v2 0/2] docs: Further adjustments to pci-addresses.rst
  • From: Boris Fiuczynski
• Re: [PATCH 2/3] security: Introduce virSecurityManagerDomainSetIncomingPathLabel
  • From: Erik Skultety
• Re: [PATCH v2 0/2] docs: Further adjustments to pci-addresses.rst
  • From: Andrea Bolognani
• Re: [PATCH 2/3] security: Introduce virSecurityManagerDomainSetIncomingPathLabel
  • From: Michal Privoznik
• Re: [PATCH 1/3] Improve blockpull man entry
  • From: Peter Krempa
• Re: [PATCH 1/3] Improve blockpull man entry
  • From: Peter Krempa
• Re: [PATCH 0/3] doc: minor improvements
  • From: Sebastian Mitterle
• Re: [PATCH v2 2/2] docs: Improve zPCI section in pci-addresses.rst
  • From: Cornelia Huck
• [PATCH v2 1/2] docs: Update introduction in pci-addresses.rst
  • From: Boris Fiuczynski
• [PATCH v2 0/2] docs: Further adjustments to pci-addresses.rst
  • From: Boris Fiuczynski
• [PATCH v2 2/2] docs: Improve zPCI section in pci-addresses.rst
  • From: Boris Fiuczynski
• Re: [PATCH 2/2] docs: Improve zPCI section in pci-addresses.rst
  • From: Andrea Bolognani
• [libvirt PATCH 07/10] vbox: add support for version 6.0 SDK
  • From: Daniel P. Berrangé
• [libvirt PATCH 05/10] vbox: remove unused support for Windows MSCOM
  • From: Daniel P. Berrangé
• [libvirt PATCH 02/10] vbox: remove version 5.0 CAPI header
  • From: Daniel P. Berrangé
• [libvirt PATCH 09/10] vbox: add support for version 6.1 SDK
  • From: Daniel P. Berrangé
• [libvirt PATCH 08/10] vbox: add version 6.1 CAPI header
  • From: Daniel P. Berrangé
• [libvirt PATCH 10/10] docs: add news about virtualbox version support changes
  • From: Daniel P. Berrangé
• [libvirt PATCH 06/10] vbox: add version 6.0 CAPI header
  • From: Daniel P. Berrangé
• [libvirt PATCH 04/10] vbox: remove version 5.1 CAPI header
  • From: Daniel P. Berrangé
• [libvirt PATCH 03/10] vbox: remove support for version 5.1 API
  • From: Daniel P. Berrangé
• [libvirt PATCH 00/10] vbox: update to support newer versions and drop eol versions
  • From: Daniel P. Berrangé
• [libvirt PATCH 01/10] vbox: remove support for version 5.0 API
  • From: Daniel P. Berrangé
• Re: [PATCH 2/2] docs: Improve zPCI section in pci-addresses.rst
  • From: Cornelia Huck
• Re: [PATCH 2/2] docs: Improve zPCI section in pci-addresses.rst
  • From: Boris Fiuczynski
• Re: [PATCH v5 0/4] introduction of migration_version attribute for VFIO live migration
  • From: Cornelia Huck
• Re: [PATCH 3/3] qemu: Label restore path outside of secdriver transactions
  • From: Erik Skultety
• Re: [PATCH 1/3] selinux: Don't remember label for restore path
  • From: Erik Skultety
• Re: [PATCH 2/3] security: Introduce virSecurityManagerDomainSetIncomingPathLabel
  • From: Erik Skultety
• Re: [libvirt PATCH] util: Fix virDaemonForkIntoBackground
  • From: Michal Privoznik
• Re: [PATCH 2/2] docs: Improve zPCI section in pci-addresses.rst
  • From: Andrea Bolognani
• Re: [PATCH v5 0/4] introduction of migration_version attribute for VFIO live migration
  • From: Yan Zhao
• Re: [PATCH 2/2] docs: Improve zPCI section in pci-addresses.rst
  • From: Cornelia Huck
• Re: [PATCH V2 4/5] cpu: Add helper funtions to parse vendor and model
  • From: Zhenyu Zheng
• Re: [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: Zhenyu Zheng
• Re: [PATCH 2/2] docs: Improve zPCI section in pci-addresses.rst
  • From: Boris Fiuczynski
• Re: [PATCH v5 0/4] introduction of migration_version attribute for VFIO live migration
  • From: Cornelia Huck
• Re: [PATCH 4/5] doc: rng schemas and html doc for rbd namespace attribute
  • From: Han Han
• [PATCH v1 4/7] qemu: Implement the SBBC pSeries feature
  • From: Daniel Henrique Barboza
• [PATCH v1 5/7] qemu: Add capability for IBS pSeries feature
  • From: Daniel Henrique Barboza
• [PATCH v1 6/7] qemu: Implement the IBS pSeries feature
  • From: Daniel Henrique Barboza
• [PATCH v1 7/7] news: Update for the recent added pSeries features
  • From: Daniel Henrique Barboza
• [PATCH v1 3/7] qemu: Add capability for SBBC pSeries feature
  • From: Daniel Henrique Barboza
• [PATCH v1 2/7] qemu: Implement the CFPC pSeries feature
  • From: Daniel Henrique Barboza
• [PATCH v1 0/7] add Spectre related PowerPC features
  • From: Daniel Henrique Barboza
• [PATCH v1 1/7] qemu: Add capability for CFPC pSeries feature
  • From: Daniel Henrique Barboza
• Re: [libvirt PATCH] docs: kbase: add a page about debugging
  • From: Andrea Bolognani
• Re: [libvirt PATCH] docs: Add section about code blocks to styleguide.rst
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 1/4] docs: Use consistent style in pci-addresses.rst
  • From: Andrea Bolognani
• [libvirt PATCH] docs: Add section about code blocks to styleguide.rst
  • From: Andrea Bolognani
• Re: [PATCH 2/2] docs: Improve zPCI section in pci-addresses.rst
  • From: Andrea Bolognani
• Re: [PATCH 2/2] docs: Improve zPCI section in pci-addresses.rst
  • From: Cornelia Huck
• Re: [PATCH] conf: Trivial comment fix
  • From: Leonid Bloch
• Re: [PATCH 1/2] docs: Update introduction in pci-addresses.rst
  • From: Cornelia Huck
• [PATCH 1/2] node_device_udev: handle move events
  • From: Mark Asselstine
• [PATCH 2/2] Avoid unnecessary error messages handling udev events
  • From: Mark Asselstine
• [PATCH 1/2] docs: Update introduction in pci-addresses.rst
  • From: Boris Fiuczynski
• [PATCH 0/2] docs: Further adjustments to pci-addresses.rst
  • From: Boris Fiuczynski
• [PATCH 2/2] docs: Improve zPCI section in pci-addresses.rst
  • From: Boris Fiuczynski
• Re: [libvirt PATCH 0/3] docs: misc fixes to static asset handling
  • From: Laine Stump
• [PATCH] bhyve: add missing param to virDomainPCIAddressBusSetModel
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 3/3] qemu: block: external snapshot-delete implementation for straightforward cases
  • From: Pavel Mores
• Re: [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Boris Fiuczynski
• Re: [PATCH] conf: Trivial comment fix
  • From: Andrea Bolognani
• Re: [libvirt PATCH] docs: fix mistaken description of the read-only socket units
  • From: Andrea Bolognani
• Re: [RFC] Adding docker driver to libvirt
  • From: Dmitry Nesterenko
• [libvirt PATCH] util: Fix virDaemonForkIntoBackground
  • From: Jiri Denemark
• Re: [RFC] Adding docker driver to libvirt
  • From: Dmitry Nesterenko
• Re: [RFC] Adding docker driver to libvirt
  • From: Daniel P. Berrangé
• Re: [PATCH 2/5] qemu: Add free and copy function for qemuDomainJobInfo and use it
  • From: Eric Blake
• Re: [PATCH 1/5] remote: remoteDispatchDomainGetJobStats: Encode typed parameter strings
  • From: Eric Blake
• Re: [PATCH] qemuDomainDefPostParse: Fail if unable to fill machine type
  • From: Pavel Mores
• [libvirt PATCH] docs: fix mistaken description of the read-only socket units
  • From: Daniel P. Berrangé
• Re: [PATCH 4/5] doc: rng schemas and html doc for rbd namespace attribute
  • From: Jason Dillaman
• [PATCH] qemuDomainDefPostParse: Fail if unable to fill machine type
  • From: Michal Privoznik
• Re: [libvirt PATCH 4/4] docs: Remove one example from pci-addresses.rst
  • From: Andrea Bolognani
• Re: [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Andrea Bolognani
• Re: [RFC] Adding docker driver to libvirt
  • From: Nikolay Shirokovskiy
• Re: [libvirt PATCH 3/3] docs: remove old unused favicon file
  • From: Daniel P. Berrangé
• [libvirt PATCH 2/3] docs: add missing files to static asset list
  • From: Daniel P. Berrangé
• [libvirt PATCH 0/3] docs: misc fixes to static asset handling
  • From: Daniel P. Berrangé
• [libvirt PATCH 3/3] docs: remove old unused favicon file
  • From: Daniel P. Berrangé
• [libvirt PATCH 1/3] docs: fix handling of static assets in build dir
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 1/4] docs: Use consistent style in pci-addresses.rst
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 1/4] docs: Use consistent style in pci-addresses.rst
  • From: Andrea Bolognani
• Re: [libvirt-php] libvirt_domain_interface_addresses causing segfault
  • From: Fernando Casas Schössow
• [PATCH] conf: Trivial comment fix
  • From: Leonid Bloch
• Re: [libvirt-php] libvirt_domain_interface_addresses causing segfault
  • From: Michal Privoznik
• Re: [libvirt PATCH 1/4] docs: Use consistent style in pci-addresses.rst
  • From: Daniel P. Berrangé
• FYI: upstream bug reporting now using https://gitlab.com/libvirt
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 1/4] docs: Use consistent style in pci-addresses.rst
  • From: Ján Tomko
• Re: [libvirt-php] libvirt_domain_interface_addresses() only returns only on IP address for NICs with multiple IPs
  • From: Michal Privoznik
• Re: [libvirt-php] libvirt_domain_interface_addresses causing segfault
  • From: Fernando Casas Schössow
• Re: [libvirt PATCH 4/4] docs: Remove one example from pci-addresses.rst
  • From: Boris Fiuczynski
• Re: [libvirt-php] libvirt_domain_interface_addresses causing segfault
  • From: Michal Privoznik
• [PATCH 1/5] remote: remoteDispatchDomainGetJobStats: Encode typed parameter strings
  • From: Peter Krempa
• [PATCH 2/5] qemu: Add free and copy function for qemuDomainJobInfo and use it
  • From: Peter Krempa
• [PATCH 5/5] backup: Store error message for failed backups
  • From: Peter Krempa
• [PATCH 4/5] qemu: domain: Add 'errmsg' field to qemuDomainJobInfo
  • From: Peter Krempa
• [PATCH 3/5] API: Add VIR_DOMAIN_JOB_ERRMSG domain job statistics field
  • From: Peter Krempa
• [PATCH 0/5] backup: Preserve error of failed backup job
  • From: Peter Krempa
• Re: [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Boris Fiuczynski
• Re: [libvirt-php] libvirt_domain_interface_addresses() only returns only on IP address for NICs with multiple IPs
  • From: Fernando Casas Schössow
• Re: [libvirt-php] libvirt_domain_interface_addresses causing segfault
  • From: Fernando Casas Schössow
• [libvirt-php] libvirt_domain_interface_addresses() only returns only on IP address for NICs with multiple IPs
  • From: Fernando Casas Schössow
• [libvirt-php] libvirt_domain_interface_addresses causing segfault
  • From: Fernando Casas Schössow
• Re: [PATCH v2] qemu: Revoke access to mirror on failed blockcopy
  • From: Pavel Mores
• Re: [libvirt PATCH 4/4] docs: Remove one example from pci-addresses.rst
  • From: Cornelia Huck
• Re: [PATCH] qemu: fix hang in p2p + xbzrle compression + parallel migration
  • From: Jiri Denemark
• [PATCH v2] qemu: Revoke access to mirror on failed blockcopy
  • From: Michal Privoznik
• Re: [libvirt PATCH 4/4] docs: Remove one example from pci-addresses.rst
  • From: Andrea Bolognani
• [PATCH] qemu: fix hang in p2p + xbzrle compression + parallel migration
  • From: Lin Ma
• Re: [libvirt PATCH] docs: kbase: add a page about debugging
  • From: Han Han
• Re: [libvirt PATCH 4/4] docs: Remove one example from pci-addresses.rst
  • From: Cornelia Huck
• Re: [libvirt PATCH 3/4] docs: Remove MAC addresses from pci-addresses.rst
  • From: Cornelia Huck
• Re: [libvirt PATCH 1/4] docs: Use consistent style in pci-addresses.rst
  • From: Cornelia Huck
• Re: [libvirt PATCH 2/4] docs: Move sections around in pci-addresses.rst
  • From: Cornelia Huck
• Re: [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Andrea Bolognani
• [libvirt PATCH 3/4] docs: Remove MAC addresses from pci-addresses.rst
  • From: Andrea Bolognani
• [libvirt PATCH 2/4] docs: Move sections around in pci-addresses.rst
  • From: Andrea Bolognani
• [libvirt PATCH 4/4] docs: Remove one example from pci-addresses.rst
  • From: Andrea Bolognani
• [libvirt PATCH 0/4] docs: A few adjustments to pci-addresses.rst
  • From: Andrea Bolognani
• [libvirt PATCH 1/4] docs: Use consistent style in pci-addresses.rst
  • From: Andrea Bolognani
• Re: [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Cornelia Huck
• Re: [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Andrea Bolognani
• Re: [PATCH 0/2] Include lease time option into DHCP settings
  • From: Julio Faracco
• [PATCH 2/2] tests: Add tests for <leasetime/> to cover dnsmasq settings
  • From: Julio Faracco
• [PATCH 1/2] conf: Add <leasetime/> option for <dhcp/> settings
  • From: Julio Faracco
• [PATCH 0/2] Include lease time option into DHCP settings
  • From: Julio Faracco
• Re: [libvirt PATCH 2/3] travis: Reduce test matrix
  • From: Andrea Bolognani
• Re: [libvirt PATCH 2/2] gitlab: Enable improved ccache usage
  • From: Andrea Bolognani
• Re: [PATCH] qemu: Revoke access to mirror on failed blockcopy
  • From: Michal Privoznik
• [libvirt PATCH] docs: kbase: add a page about debugging
  • From: Ján Tomko
• Re: [PATCH 01/43] admin: convert virMutex to GMutex
  • From: Pavel Mores
• Re: [PATCH 01/43] admin: convert virMutex to GMutex
  • From: Daniel P. Berrangé
• Re: Wiki page audit - possible page deleteion
  • From: Daniel P. Berrangé
• Re: [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Cornelia Huck
• Re: [PATCH 03/43] conf: nwfilter_ipaddrmap: convert virMutex to GMutex
  • From: Laine Stump
• Re: [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Boris Fiuczynski
• Re: [PATCH 01/43] admin: convert virMutex to GMutex
  • From: Pavel Mores
• Re: Wiki page audit - possible page deleteion
  • From: Ján Tomko
• Re: [PATCH 02/43] bhyve: convert virMutex to GMutex
  • From: Pavel Mores
• Re: [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Cornelia Huck
• Re: [RFC] Adding docker driver to libvirt
  • From: Daniel P. Berrangé
• Re: [PATCH 02/43] bhyve: convert virMutex to GMutex
  • From: Daniel P. Berrangé
• Re: [PATCH 01/43] admin: convert virMutex to GMutex
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 2/3] travis: Reduce test matrix
  • From: Daniel P. Berrangé
• Re: [PATCH 03/43] conf: nwfilter_ipaddrmap: convert virMutex to GMutex
  • From: Pavel Mores
• Re: [libvirt PATCH 2/2] gitlab: Enable improved ccache usage
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 1/2] gitlab: Don't define $MAKE
  • From: Daniel P. Berrangé
• Re: [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Boris Fiuczynski
• Re: [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Boris Fiuczynski
• Re: [PATCH 02/43] bhyve: convert virMutex to GMutex
  • From: Pavel Mores
• Re: [PATCH] qemu: Revoke access to mirror on failed blockcopy
  • From: Pavel Mores
• [PATCH 3/3] Add version info on domaincaps doc
  • From: Sebastian Mitterle
• [PATCH 2/3] Improve Disk image chains documentation
  • From: Sebastian Mitterle
• [PATCH 0/3] doc: minor improvements
  • From: Sebastian Mitterle
• [PATCH 1/3] Improve blockpull man entry
  • From: Sebastian Mitterle
• Re: [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Ján Tomko
• [PATCH] docs: add zpci information to pci-addresses.rst
  • From: Cornelia Huck
• Re: [PATCH] qemu: Revoke access to mirror on failed blockcopy
  • From: Daniel Henrique Barboza
• Re: [libvirt PATCH] docs: Add pci-addresses.rst
  • From: Andrea Bolognani
• Re: [PATCH v5 3/4] vfio/mdev: add migration_version attribute for mdev (under mdev device node)
  • From: Yan Zhao
• Re: [PATCH v5 1/4] vfio/mdev: add migration_version attribute for mdev (under mdev_type node)
  • From: Yan Zhao
• [libvirt PATCH] docs: Fix word repetition in pci-addresses.rst
  • From: Andrea Bolognani
• Re: [libvirt PATCH] docs: Add pci-addresses.rst
  • From: Christian Ehrhardt
• Re: [PATCH v2] apparmor: avoid denials on libpmem initialization
  • From: Christian Ehrhardt
• Re: [libvirt PATCH] docs: Add pci-addresses.rst
  • From: Andrea Bolognani
• Re: [PATCH v5 3/4] vfio/mdev: add migration_version attribute for mdev (under mdev device node)
  • From: Erik Skultety
• Re: [PATCH v5 1/4] vfio/mdev: add migration_version attribute for mdev (under mdev_type node)
  • From: Erik Skultety
• Re: [libvirt PATCH] docs: Add pci-addresses.rst
  • From: Cornelia Huck
• Re:Re: what a correct use for virConnectDomainEventRegisterAny API, how to Obtain a stable expected result
  • From: thomas.kuang
• Re: [PATCH] libxl: enable Xen's e820_host setting
  • From: Jim Fehlig
• Re: [PATCH] libxl: enable Xen's e820_host setting
  • From: Marek Marczykowski-Górecki
• Re: [PATCH v2 1/4] conf: add xen specific feature: e820_host
  • From: Jim Fehlig
• Re: [PATCH] libxl: enable Xen's e820_host setting
  • From: Jim Fehlig
• Re: [PATCH 1/2] docs: backup: Remove references to push backup to network disk
  • From: Eric Blake
• Re: [libvirt PATCH] docs: Add pci-addresses.rst
  • From: Laine Stump
• Re: [PATCH 1/2] docs: backup: Remove references to push backup to network disk
  • From: Peter Krempa
• Re: [RFC] Adding docker driver to libvirt
  • From: Andrea Bolognani
• [libvirt PATCH] docs: Add pci-addresses.rst
  • From: Andrea Bolognani
• Re: [libvirt PATCH 0/2] gitlab: Clean up and improve ccache usage
  • From: Andrea Bolognani
• Re: [PATCH 1/2] docs: backup: Remove references to push backup to network disk
  • From: Eric Blake
• Re: [PATCH 02/43] bhyve: convert virMutex to GMutex
  • From: Rafael Fonseca
• Re: [PATCH 20/43] network: bridge_driver: convert virMutex to GMutex
  • From: Pavel Mores
• Re: [PATCH 06/43] util: virtpm: convert virMutex to GMutex
  • From: Pavel Mores
• Re: [PATCH 04/43] conf: virchrdev: convert virMutex to GMutex
  • From: Pavel Mores
• Re: [RFC] Adding docker driver to libvirt
  • From: Martin Kletzander
• Re: [PATCH 02/43] bhyve: convert virMutex to GMutex
  • From: Pavel Mores
• Re: [PATCH 01/43] admin: convert virMutex to GMutex
  • From: Pavel Mores
• Re: [PATCH 2/2] backup: Allow 'encryption' of backups and scratch images
  • From: Erik Skultety
• Re: [PATCH 0/2] backup: Fix docs and add schema for LUKS encrypted backups
  • From: Ján Tomko
• Re: [libvirt PATCH] README: rewrite in rst
  • From: Michal Privoznik
• [libvirt PATCH] README: Add GitLab CI badge
  • From: Andrea Bolognani
• Re: [libvirt PATCH] Convert all remaining Markdown files to reStructuredText
  • From: Andrea Bolognani
• Re: [libvirt PATCH] Convert all remaining Markdown files to reStructuredText
  • From: Ján Tomko
• Re: [libvirt PATCH] Convert all remaining Markdown files to reStructuredText
  • From: Ján Tomko
• Re: [PATCH 2/2] conf: Don't format http cookies unless VIR_DOMAIN_DEF_FORMAT_SECURE is used
  • From: Erik Skultety
• Re: [PATCH 0/2] Fix formatting of http cookies into XML
  • From: Erik Skultety
• Re: [libvirt PATCH] Convert all remaining Markdown files to reStructuredText
  • From: Andrea Bolognani
• Re: libvirt python console
  • From: Michal Privoznik
• Re: Wiki page audit - possible page deleteion
  • From: Michal Privoznik
• [libvirt PATCH] CONTRIBUTING: Include in release archives
  • From: Andrea Bolognani
• [libvirt PATCH] Convert all remaining Markdown files to reStructuredText
  • From: Andrea Bolognani
• Re: [PATCH] libvirt-stream.c: Use g_autofree
  • From: Erik Skultety
• Re: [libvirt PATCH 1/2] CONTRIBUTING: Add entry point for new contributors
  • From: Andrea Bolognani
• Re: [libvirt-jenkins-ci PATCH v3 4/5] guests: Introduce the new 'gitlab' flavor
  • From: Erik Skultety
• Re: [libvirt PATCH 2/3] travis: Reduce test matrix
  • From: Andrea Bolognani
• Re: [PATCH ocaml 1/1] Add dune build system
  • From: Richard W.M. Jones
• Re: [libvirt-jenkins-ci PATCH v3 4/5] guests: Introduce the new 'gitlab' flavor
  • From: Andrea Bolognani
• [PATCH ocaml 0/1] RFC: add/switch to dune build system
  • From: Pino Toscano
• [PATCH ocaml 1/1] Add dune build system
  • From: Pino Toscano
• Re: [libvirt PATCH 2/3] travis: Reduce test matrix
  • From: Daniel P. Berrangé
• Re: what a correct use for virConnectDomainEventRegisterAny API, how to Obtain a stable expected result
  • From: Daniel P. Berrangé
• libvirt python console
  • From: PunkGeek
• Re: [libvirt PATCH 1/3] travis: Deduplicate build instructions
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 3/3] travis: Remove usage of 'sudo'
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 2/3] travis: Reduce test matrix
  • From: Daniel P. Berrangé
• Re: [PATCH] driver.c: Use g_autofree
  • From: Erik Skultety
• [PATCH] qemu: Revoke access to mirror on failed blockcopy
  • From: Michal Privoznik
• [PATCH 0/2] backup: Fix docs and add schema for LUKS encrypted backups
  • From: Peter Krempa
• [PATCH 1/2] docs: backup: Remove references to push backup to network disk
  • From: Peter Krempa
• [PATCH 2/2] backup: Allow 'encryption' of backups and scratch images
  • From: Peter Krempa
• [libvirt PATCH] README: rewrite in rst
  • From: Ján Tomko
• [PATCH 0/2] Fix formatting of http cookies into XML
  • From: Peter Krempa
• [PATCH 1/2] virstoragetest: testBackingParse: Use VIR_DOMAIN_DEF_FORMAT_SECURE when formatting xml
  • From: Peter Krempa
• [PATCH 2/2] conf: Don't format http cookies unless VIR_DOMAIN_DEF_FORMAT_SECURE is used
  • From: Peter Krempa
• Re: [libvirt-jenkins-ci PATCH v3 4/5] guests: Introduce the new 'gitlab' flavor
  • From: Erik Skultety
• Re: [libvirt PATCH 2/2] README-hacking: Drop from the git repository
  • From: Ján Tomko
• Re: [libvirt PATCH 1/2] CONTRIBUTING: Add entry point for new contributors
  • From: Ján Tomko
• Re: [PATCH 05/43] esx: convert virMutex to GMutex
  • From: Rafael Fonseca
• FYI: Report about libvirt failing to compile on MSYS2 with an XDR error
  • From: Richard W.M. Jones
• Re: [libvirt PATCH 0/2] Improve entry point for new contributors
  • From: Andrea Bolognani
• Re: [RFC] Adding docker driver to libvirt
  • From: nshirokovskiy
• Re: [RFC] Adding docker driver to libvirt
  • From: Cedric Bosdonnat
• Re: [PATCH 05/43] esx: convert virMutex to GMutex
  • From: Pino Toscano
• [PATCH v2 3/4] xenconfig: parse e820_host option
  • From: Marek Marczykowski-Górecki
• [PATCH v2 2/4] libxl: make use of e820_host feature
  • From: Marek Marczykowski-Górecki
• [PATCH v2 1/4] conf: add xen specific feature: e820_host
  • From: Marek Marczykowski-Górecki
• [PATCH v2 4/4] tests: check e820_host option handling
  • From: Marek Marczykowski-Górecki
• [PATCH v2 0/4] libxl: add e820_host option to the libvirt config
  • From: Marek Marczykowski-Górecki
• Re: [PATCH 4/4] tests: check e820_host option handling
  • From: Jim Fehlig
• Re: [PATCH 3/4] xenconfig: parse e820_host option
  • From: Jim Fehlig
• Re: [PATCH] util: fix iteration in virSocketAddrResolveService
  • From: Daniel Henrique Barboza
• Re: [PATCH 2/4] libxl: make use of e820_host feature
  • From: Jim Fehlig
• Re: [PATCH] libxl: enable Xen's e820_host setting
  • From: Jim Fehlig
• Re: [PATCH 1/4] conf: add xen specific feature: e820_host
  • From: Jim Fehlig
• [PATCH 3/4] xenconfig: parse e820_host option
  • From: Marek Marczykowski-Górecki
• [PATCH 2/4] libxl: make use of e820_host feature
  • From: Marek Marczykowski-Górecki
• [PATCH 4/4] tests: check e820_host option handling
  • From: Marek Marczykowski-Górecki
• [PATCH 1/4] conf: add xen specific feature: e820_host
  • From: Marek Marczykowski-Górecki
• [PATCH 0/4] libxl: add e820_host option to the libvirt config
  • From: Marek Marczykowski-Górecki
• Re: [RFC] Faster libvirtd restart with nwfilter rules, one more time
  • From: Eric Garver
• Re: [PATCH] libxl: enable Xen's e820_host setting
  • From: Marek Marczykowski-Górecki
• Re: [RFC] Faster libvirtd restart with nwfilter rules, one more time
  • From: Laine Stump
• [PATCH] util: fix iteration in virSocketAddrResolveService
  • From: Nikolay Shirokovskiy
• [PATCH] libvirt-stream.c: Use g_autofree
  • From: Seeteena Thoufeek
• [PATCH] driver.c: Use g_autofree
  • From: Seeteena Thoufeek
• what a correct use for virConnectDomainEventRegisterAny API, how to Obtain a stable expected result
  • From: thomas.kuang
• [PATCH v5 3/4] vfio/mdev: add migration_version attribute for mdev (under mdev device node)
  • From: Yan Zhao
• [PATCH v5 4/4] drm/i915/gvt: export migration_version to mdev sysfs (under mdev device node)
  • From: Yan Zhao
• [PATCH v5 2/4] drm/i915/gvt: export migration_version to mdev sysfs (under mdev_type node)
  • From: Yan Zhao
• [PATCH v5 1/4] vfio/mdev: add migration_version attribute for mdev (under mdev_type node)
  • From: Yan Zhao
• [PATCH v5 0/4] introduction of migration_version attribute for VFIO live migration
  • From: Yan Zhao
• Re: [RFC] Adding docker driver to libvirt
  • From: Martin Kletzander
• Re: Wiki page audit - possible page deleteion
  • From: Martin Kletzander
• Re: [PATCH 03/43] conf: nwfilter_ipaddrmap: convert virMutex to GMutex
  • From: Rafael Fonseca
• Re: [PATCH 03/43] conf: nwfilter_ipaddrmap: convert virMutex to GMutex
  • From: Rafael Fonseca
• Re: [PATCH 03/43] conf: nwfilter_ipaddrmap: convert virMutex to GMutex
  • From: Laine Stump
• Re: [PATCH 03/43] conf: nwfilter_ipaddrmap: convert virMutex to GMutex
  • From: Laine Stump
• [PATCH 43/43] util: virthread: remove GMutex and Gcond
  • From: Rafael Fonseca
• [PATCH 39/43] util: virthreadpool: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 41/43] util: virthread: remove virRWLock
  • From: Rafael Fonseca
• [PATCH 42/43] util: virObjectLockable: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 40/43] util: virObjectRWLockable: convert virRWLock to GRWLock
  • From: Rafael Fonseca
• [PATCH 37/43] tools: virsh: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 33/43] util: virlockspace: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 38/43] nwfilter: nwfilter_learnipaddr: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 36/43] util: virnetlink: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 35/43] util: virnetdevveth: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 31/43] remote: convert virMutex to GMutex in daemonClientPrivate
  • From: Rafael Fonseca
• [PATCH 34/43] util: virnetdevmacvlan: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 29/43] storage: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 32/43] util: virfirewall: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 30/43] secret: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 23/43] tests: qemusecuritymock: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 27/43] nwfilter: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 28/43] openvz: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 22/43] vmware: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 24/43] tests: qemumonitortestutils: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 26/43] remote: remote_driver: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 21/43] node_device: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 19/43] lxc: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 25/43] qemu: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 17/43] nwfilter: nwfilter_gentech_driver: convert virMutex to GRecMutex
  • From: Rafael Fonseca
• [PATCH 20/43] network: bridge_driver: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 16/43] nwfilter: nwfilter_dhcpsnoop: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 13/43] conf: nwfilter_conf: convert virRWLock to GRWLock
  • From: Rafael Fonseca
• [PATCH 18/43] lxc: lxc_fuse: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 15/43] test: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 11/43] locking: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 10/43] vz: vz_driver: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 12/43] logging: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 14/43] util: virlog: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 09/43] libxl: convert virMutex to GMutex in libxlPrivate
  • From: Rafael Fonseca
• [PATCH 08/43] util: virnodesuspend: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 07/43] vbox: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 06/43] util: virtpm: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 00/43] Replace virMutex & co. by the Glib equivalent
  • From: Rafael Fonseca
• [PATCH 05/43] esx: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 04/43] conf: virchrdev: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 03/43] conf: nwfilter_ipaddrmap: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 02/43] bhyve: convert virMutex to GMutex
  • From: Rafael Fonseca
• [PATCH 01/43] admin: convert virMutex to GMutex
  • From: Rafael Fonseca
• Re: [PATCH libvirt v1 0/6] Fix ZPCI address auto-generation on s390
  • From: Andrea Bolognani
• Re: [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: Andrea Bolognani
• Re: [PATCH] formatdomain.html.in: document emulator/vcpu pin delay
  • From: Andrea Bolognani
• [libvirt PATCH 2/3] travis: Reduce test matrix
  • From: Andrea Bolognani
• [libvirt PATCH 0/3] travis: Drop xcode10.3 build, clean up
  • From: Andrea Bolognani
• [libvirt PATCH 3/3] travis: Remove usage of 'sudo'
  • From: Andrea Bolognani
• [libvirt PATCH 1/3] travis: Deduplicate build instructions
  • From: Andrea Bolognani
• Re: [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: Zhenyu Zheng
• [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: ZhengZhenyu
• Re: [PATCH V2 4/5] cpu: Add helper funtions to parse vendor and model
  • From: Zhenyu Zheng
• [no subject]
  • From: ZhengZhenyu
• [no subject]
  • From: ZhengZhenyu
• [no subject]
  • From: ZhengZhenyu
• Re: [PATCH] libxl: enable Xen's e820_host setting
  • From: Jim Fehlig
• [PATCH] formatdomain.html.in: document emulator/vcpu pin delay
  • From: Daniel Henrique Barboza
• Re: [libvirt-ci PATCH v2] dco: build and publish a container image for DCO check
  • From: Andrea Bolognani
• [libvirt-ci PATCH v2] dco: build and publish a container image for DCO check
  • From: Daniel P. Berrangé
• Re: [libvirt-jenkins-ci PATCH] dco: build and publish a container image for DCO check
  • From: Andrea Bolognani
• Re: [PATCH v2] apparmor: avoid denials on libpmem initialization
  • From: Jamie Strandboge
• Re: [libvirt-jenkins-ci PATCH] dco: build and publish a container image for DCO check
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH] gitdm: Add missing entries
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH] gitdm: Add missing entries
  • From: Andrea Bolognani
• Re: [libvirt PATCH 1/6] docs: point users to gitlab for issue tracking
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 6/6] docs: replace site name with link type in download table
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH v2] docs: list settings required in creating a new git repo
  • From: Andrea Bolognani
• Re: [libvirt PATCH 6/6] docs: replace site name with link type in download table
  • From: Ján Tomko
• Re: [libvirt PATCH 5/6] docs: add link to bug tracker against each download
  • From: Ján Tomko
• [libvirt PATCH v2] docs: list settings required in creating a new git repo
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 4/6] docs: update for rename of libvirt-jenkins.ci repository
  • From: Ján Tomko
• Re: [libvirt PATCH 3/6] docs: style git mirror links less prominently
  • From: Ján Tomko
• Re: [libvirt PATCH 2/6] docs: point to gitlab as primary git repo host
  • From: Ján Tomko
• Re: [libvirt PATCH 1/6] docs: point users to gitlab for issue tracking
  • From: Ján Tomko
• [libvirt PATCH 6/6] docs: replace site name with link type in download table
  • From: Daniel P. Berrangé
• [libvirt PATCH 5/6] docs: add link to bug tracker against each download
  • From: Daniel P. Berrangé
• [libvirt PATCH 4/6] docs: update for rename of libvirt-jenkins.ci repository
  • From: Daniel P. Berrangé
• [libvirt PATCH 3/6] docs: style git mirror links less prominently
  • From: Daniel P. Berrangé
• [libvirt PATCH 2/6] docs: point to gitlab as primary git repo host
  • From: Daniel P. Berrangé
• [libvirt PATCH 1/6] docs: point users to gitlab for issue tracking
  • From: Daniel P. Berrangé
• [libvirt PATCH 0/6] docs: misc updates for gitlab changes
  • From: Daniel P. Berrangé
• Re: [PATCH] virsh: cmdUndefine: Properly extract delete-storage-volume-snapshots flag
  • From: Ján Tomko
• [libvirt-dockerfiles PATCH 1/5] README: Update git URLs to point to GitLab
  • From: Andrea Bolognani
• [libvirt-dockerfiles PATCH 5/5] monitor: Update after libvirt-ci repo rename
  • From: Andrea Bolognani
• [libvirt-dockerfiles PATCH 3/5] refresh: Update after libvirt-ci repo rename
  • From: Andrea Bolognani
• [libvirt-dockerfiles PATCH 4/5] trigger: Update after libvirt-ci repo rename
  • From: Andrea Bolognani
• [libvirt-dockerfiles PATCH 2/5] README: Update after libvirt-ci repo rename
  • From: Andrea Bolognani
• [libvirt-dockerfiles PATCH 0/5] Update after libvirt-ci repo rename
  • From: Andrea Bolognani
• [PATCH] virsh: cmdUndefine: Properly extract delete-storage-volume-snapshots flag
  • From: Peter Krempa
• Re: [PATCH 1/2] qemu: Add some cpu hotpluggable inforamtion in vm xml when run "virsh setvcpus vm --count <current> --live".
  • From: Peter Krempa
• Re: [PATCH] libxl: enable Xen's e820_host setting
  • From: Daniel P. Berrangé
• Re: [PATCH 3/3] xenconfig: Add support for max_event_channels
  • From: Daniel P. Berrangé
• [jenkins-ci PATCH 3/3] github: Update repo-lockdown config after repo rename
  • From: Andrea Bolognani
• [jenkins-ci PATCH 2/3] git-publish: Update config after repo rename
  • From: Andrea Bolognani
• [jenkins-ci PATCH 1/3] guests: Update README after repo rename
  • From: Andrea Bolognani
• [jenkins-ci PATCH 0/3] Update various files after repo rename
  • From: Andrea Bolognani
• Re: [PATCH 2/3] libxl: Add support for max_event_channels
  • From: Daniel P. Berrangé
• Re: [PATCH 1/3] conf: Add a new xenbus controller option for event channels
  • From: Daniel P. Berrangé
• Re: [RFC] Faster libvirtd restart with nwfilter rules, one more time
  • From: Eric Garver
• [PATCH 2/2] qemu: Add some cpu hotpluggable inforamtion in vm xml when run "virsh setvcpus vm --count --config".
  • From: Jidong Xia
• [PATCH 0/2] qemu: Add some cpu hotpluggable infomation when run "virsh setvcpus command"
  • From: Jidong Xia
• [PATCH 1/2] qemu: Add some cpu hotpluggable inforamtion in vm xml when run "virsh setvcpus vm --count <current> --live".
  • From: Jidong Xia
• [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: Zhenyu Zheng
• [PATCH V2 4/5] cpu: Add helper funtions to parse vendor and model
  • From: Zhenyu Zheng
• [PATCH V2 3/5] cpu: Introduce ARM related structs
  • From: Zhenyu Zheng
• [RFC] Adding docker driver to libvirt
  • From: nshirokovskiy
• Re: [PATCH V2 3/5] cpu: Introduce ARM related structs
  • From: Zhenyu Zheng
• [PATCH V2 3/5] cpu: Introduce ARM related structs
  • From: Zhenyu Zheng
• Re: [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: Zhenyu Zheng
• Re: [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: Daniel P. Berrangé
• Re: [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: Zhenyu Zheng
• Re: [libvirt PATCH] docs: list settings required in creating a new git repo
  • From: Andrea Bolognani
• Re: [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: Jiri Denemark
• ALERT: libvirt-jenkins-ci.git renamed to libvirt-ci.git
  • From: Daniel P. Berrangé
• [PATCH libvirt v1 5/6] tests: qemu: add more tests for ZPCI on S390
  • From: Shalini Chellathurai Saroja
• [PATCH libvirt v1 2/6] tests: qemu: add tests for ZPCI on s390
  • From: Shalini Chellathurai Saroja
• [PATCH libvirt v1 3/6] conf: fix ZPCI address auto-generation on s390
  • From: Shalini Chellathurai Saroja
• [PATCH libvirt v1 1/6] conf: fix ZPCI address validation on s390
  • From: Shalini Chellathurai Saroja
• [PATCH libvirt v1 4/6] qemu: move ZPCI uid validation into device validation
  • From: Shalini Chellathurai Saroja
• [PATCH libvirt v1 6/6] tests: add test with PCI and CCW device
  • From: Shalini Chellathurai Saroja
• [PATCH libvirt v1 0/6] Fix ZPCI address auto-generation on s390
  • From: Shalini Chellathurai Saroja
• Re: [RFC] Faster libvirtd restart with nwfilter rules, one more time
  • From: Daniel P. Berrangé
• Re: [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: Jiri Denemark
• Re: [libvirt-jenkins-ci PATCH v3 5/5] guests: lcitool: Enable the new 'gitlab' flavor in the lcitool script
  • From: Andrea Bolognani
• Re: [libvirt-jenkins-ci PATCH v3 4/5] guests: Introduce the new 'gitlab' flavor
  • From: Andrea Bolognani
• Re: [PATCH V2 5/5] cpu: Introduce getHost support for ARM CPU driver
  • From: Daniel P. Berrangé
• Re: [PATCH V2 4/5] cpu: Add helper funtions to parse vendor and model
  • From: Daniel P. Berrangé
• Re: [libvirt-jenkins-ci PATCH v3 3/5] guests: templates: Introduce a gitlab-runner RC init service template
  • From: Andrea Bolognani
• Re: [libvirt-jenkins-ci PATCH v3 2/5] guests: templates: Introduce a gitlab-runner systemd service template
  • From: Andrea Bolognani
• Re: [PATCH V2 3/5] cpu: Introduce ARM related structs
  • From: Daniel P. Berrangé
• Re: [PATCH V2 1/5] cpu_map: Introduce ARM cpu models
  • From: Daniel P. Berrangé
• Re: [PATCH V2 2/5] cpu: Introduce virCPUarmData to virCPUData
  • From: Daniel P. Berrangé
• Re: Wiki page audit - possible page deleteion
  • From: Daniel P. Berrangé
• Re: [PATCH 17/36] datatypes: convert virNWFilter to GObject
  • From: Daniel P. Berrangé
• Re: [PATCH 00/36] convert virObjects to GObject
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH] docs: add 'edit this page' link to footer of every page
  • From: Ján Tomko
• [PATCH v2] apparmor: avoid denials on libpmem initialization
  • From: Christian Ehrhardt
• Re: [PATCH] apparmor: avoid denials on libpmem initialization
  • From: Christian Ehrhardt
• [libvirt-jenkins-ci PATCH v3 5/5] guests: lcitool: Enable the new 'gitlab' flavor in the lcitool script
  • From: Erik Skultety
• [libvirt-jenkins-ci PATCH v3 4/5] guests: Introduce the new 'gitlab' flavor
  • From: Erik Skultety
• [libvirt-jenkins-ci PATCH v3 2/5] guests: templates: Introduce a gitlab-runner systemd service template
  • From: Erik Skultety
• [libvirt-jenkins-ci PATCH v3 3/5] guests: templates: Introduce a gitlab-runner RC init service template
  • From: Erik Skultety
• [libvirt-jenkins-ci PATCH v3 0/5] Introduce the new 'gitlab' flavor
  • From: Erik Skultety
• [libvirt-jenkins-ci PATCH v3 1/5] guests: users: Discard the .bash_logout skeleton file
  • From: Erik Skultety
• Re: [PATCH 00/36] convert virObjects to GObject
  • From: Jonathon Jongsma
• Re: [PATCH 23/36] datatypes: convert virStorageVol to GObject
  • From: Jonathon Jongsma
• Re: [PATCH 20/36] datatypes: convert virNetworkPort to GObject
  • From: Jonathon Jongsma
• Re: [PATCH 17/36] datatypes: convert virNWFilter to GObject
  • From: Rafael Fonseca
• Re: [PATCH 17/36] datatypes: convert virNWFilter to GObject
  • From: Jonathon Jongsma
• Re: [PATCH 13/36] admin: convert virAdmServer to GObject
  • From: Rafael Fonseca
• Re: [PATCH 14/36] admin: convert virAdmClient to GObject
  • From: Jonathon Jongsma
• Re: [PATCH 13/36] admin: convert virAdmServer to GObject
  • From: Jonathon Jongsma
• [PATCH] libxl: enable Xen's e820_host setting
  • From: Jim Fehlig
• Re: [PATCH 12/36] conf: convert virDomainChrSourceDef to GObject
  • From: Jonathon Jongsma
• [PATCH 2/3] libxl: Add support for max_event_channels
  • From: Jim Fehlig
• [PATCH 0/3] libxl: Add support for max_event_channels
  • From: Jim Fehlig
• [PATCH 3/3] xenconfig: Add support for max_event_channels
  • From: Jim Fehlig
• [PATCH 1/3] conf: Add a new xenbus controller option for event channels
  • From: Jim Fehlig
• Re: [PATCH] apparmor: avoid denials on libpmem initialization
  • From: Jamie Strandboge
• [libvirt PATCH 5/6] qemu-dbus: register DBus bus to the VM cgroup
  • From: marcandre . lureau
• [libvirt PATCH 6/6] qemu-cgroup: remove unnecessary include
  • From: marcandre . lureau
• [libvirt PATCH 4/6] qemu-dbus: remove unused variable
  • From: marcandre . lureau
• [libvirt PATCH 3/6] qemu-dbus: prevent double start of the bus daemon
  • From: marcandre . lureau
• [libvirt PATCH 2/6] slirp: add helper to VM cgroup
  • From: marcandre . lureau
• [libvirt PATCH 1/6] slirp: leave the dbus daemon running on error
  • From: marcandre . lureau
• [libvirt PATCH 0/6] Some slirp/dbus related fixes
  • From: marcandre . lureau
• Re: [libvirt PATCH] docs: add 'edit this page' link to footer of every page
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH] docs: add 'edit this page' link to footer of every page
  • From: Andrea Bolognani
• [libvirt PATCH] docs: list settings required in creating a new git repo
  • From: Daniel P. Berrangé
• Re: [PATCH] apparmor: avoid denials on libpmem initialization
  • From: Jamie Strandboge
• Re: [libvirt PATCH] docs: add 'edit this page' link to footer of every page
  • From: Daniel P. Berrangé
• Re: [PATCH v2 4/4] docs: documentation for virtio packed option
  • From: Bjoern Walk
• Re: [libvirt-jenkins-ci PATCH v2 5/6] guests: Introduce the new 'gitlab' flavor
  • From: Andrea Bolognani
• Re: [libvirt PATCH] docs: add 'edit this page' link to footer of every page
  • From: Ján Tomko
• Re: [libvirt-jenkins-ci PATCH] dco: build and publish a container image for DCO check
  • From: Andrea Bolognani
• Re: [libvirt PATCH 36/39] cpu_x86: Add support for stepping part of CPU signature
  • From: Jiri Denemark
• Wiki page audit - possible page deleteion
  • From: Daniel P. Berrangé
• [libvirt PATCH] docs: add 'edit this page' link to footer of every page
  • From: Daniel P. Berrangé
• Re: [libvirt-jenkins-ci PATCH] dco: build and publish a container image for DCO check
  • From: Daniel P. Berrangé
• [PATCH] apparmor: avoid denials on libpmem initialization
  • From: Christian Ehrhardt
• Re: [libvirt-jenkins-ci PATCH] dco: build and publish a container image for DCO check
  • From: Andrea Bolognani
• Re: [PATCH v2 1/1] qemu: hide details of fake reboot
  • From: nshirokovskiy
• Re: [PATCH v2 4/4] docs: documentation for virtio packed option
  • From: Ján Tomko
• Re: [libvirt-jenkins-ci PATCH] dco: build and publish a container image for DCO check
  • From: Daniel P. Berrangé
• Re: [libvirt-jenkins-ci PATCH] dco: build and publish a container image for DCO check
  • From: Andrea Bolognani
• Re: [PATCH] qemu: backup: Fix handling of backing store for backup target images
  • From: Ján Tomko
• Re: [libvirt-jenkins-ci PATCH v2 5/6] guests: Introduce the new 'gitlab' flavor
  • From: Erik Skultety
• Re: [libvirt-jenkins-ci PATCH v2 5/6] guests: Introduce the new 'gitlab' flavor
  • From: Andrea Bolognani
• Re: [PATCH v2] qemu: capabilities: update qemu-4.2 capabilities for s390x
  • From: Bjoern Walk
• Re: [PATCH v2 1/1] qemu: hide details of fake reboot
  • From: Don Koch
• Re: [libvirt-jenkins-ci PATCH v2 6/6] guests: lcitool: Enable the new 'gitlab' flavor in the lcitool script
  • From: Andrea Bolognani
• Re: [PATCH v2] qemu: capabilities: update qemu-4.2 capabilities for s390x
  • From: Ján Tomko
• Re: [PATCH v2] util: virdaemon: fix waiting for child processes
  • From: Ján Tomko
• Re: [PATCH v2] util: virdaemon: fix waiting for child processes
  • From: Rafael Fonseca
• [PATCH v2] util: virdaemon: fix waiting for child processes
  • From: Rafael Fonseca
• [libvirt-jenkins-ci PATCH] dco: build and publish a container image for DCO check
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 03/10] qemu: hook up pcie-root-port hotplug='off' option
  • From: Ján Tomko
• Re: [PATCH] storage: use local dom_disk parameter
  • From: Michal Prívozník
• Re: [libvirt-jenkins-ci PATCH v2 6/6] guests: lcitool: Enable the new 'gitlab' flavor in the lcitool script
  • From: Erik Skultety
• Re: [libvirt PATCH 00/10] Disable hotplug on pcie-root-ports
  • From: Michal Prívozník
• Re: [libvirt-jenkins-ci PATCH v2 5/6] guests: Introduce the new 'gitlab' flavor
  • From: Erik Skultety
• Re: [libvirt-jenkins-ci PATCH v2 5/6] guests: Introduce the new 'gitlab' flavor
  • From: Andrea Bolognani
• Re: [libvirt-jenkins-ci PATCH v2 6/6] guests: lcitool: Enable the new 'gitlab' flavor in the lcitool script
  • From: Andrea Bolognani
• Re: [PATCH] storage: use local dom_disk parameter
  • From: Pavel Mores
• Re: [PATCH] util: virdaemon: fix waiting for child processes
  • From: Ján Tomko
• Re: [libvirt-jenkins-ci PATCH v2 1/6] guests: users: Discard the .bash_logout skeleton file
  • From: Andrea Bolognani
• [PATCH 3/5] qemu: Implement rbd namespace attribute
  • From: Han Han
• [PATCH 5/5] news: qemu: Support rbd namespace
  • From: Han Han
• [PATCH 1/5] qemu_capabilities: Add QEMU_CAPS_RBD_NAMESPACE
  • From: Han Han
• [PATCH 4/5] doc: rng schemas and html doc for rbd namespace attribute
  • From: Han Han
• [PATCH 2/5] conf: Support to parse rbd namespace attribute
  • From: Han Han
• [PATCH 0/5] qemu: Support rbd namespace attribute
  • From: Han Han
• Re: [PATCH v2 1/1] qemu: hide details of fake reboot
  • From: nshirokovskiy
• Re: [PATCH] util: virdaemon: fix waiting for child processes
  • From: Rafael Fonseca
• Re: A few XML modeling questions
  • From: Jim Fehlig
• Re: [PATCH 03/36] qemu: convert virQEMUCaps to GObject
  • From: Jonathon Jongsma
• Re: [PATCH 01/36] util: virresctrl: convert classes to GObject
  • From: Jonathon Jongsma
• [PATCH] util: virdaemon: fix waiting for child processes
  • From: Rafael Fonseca
• Re: [PATCH ocaml] build: skip github lockdown file in manifest check
  • From: Pino Toscano
• Re: Domain backup file explodes on s3fs
  • From: Eric Blake
• Re: [virttools-planet PATCH 2/4] Introduce use of GitLab CI for publishing to GitLab Pages
  • From: Andrea Bolognani
• [PATCH ocaml] build: skip github lockdown file in manifest check
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 02/10] docs: Add glib-adoption.rst
  • From: Daniel P. Berrangé