Linux Wireless

• Thread Index

• [PATCH v2] iw: allow to set wmm parameters from iw
  • From: Andrea Greco <a.greco@xxxxxxxxx>
• [PATCH 1/4] dt-bindings/marvell-8xxx: Allow wake-up interrupt to be placed in a separate node
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH 0/4] mwifiex PCI/wake-up interrupt fixes
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH 2/4] mwifiex: Fetch wake-up interrupt from 'wake-up' subnode when it exists
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH 4/4] arm64: dts: rockchip: gru: Move wifi wake-up interrupt into its own subnode
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH 3/4] mwifiex: Flag wake-up interrupt as IRQ_NOAUTOEN rather than disabling it too late
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [RFC PATCH v3 07/12] iwlwifi: Extended Key ID support (NATIVE)
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• [REGRESSION] v5.0-rc5 rtl8192cu breakage
  • From: Vito Caputo <vcaputo@xxxxxxxxxxx>
• Re: [RFC PATCH v3 04/12] mac80211: Compatibility Extended Key ID support
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 05/12] mac80211: Mark A-MPDU keyid borders for drivers
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 03/12] mac80211: IEEE 802.11 Extended Key ID support
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 03/12] mac80211: IEEE 802.11 Extended Key ID support
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [PATCH] mac80211: Change default tx_sk_pacing_shift to 7
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• [PATCH] iwlwifi: mvm: fix unaligned read of rx_pkt_status
  • From: Wang Xuerui <wangxuerui@xxxxxxxxx>
• [PATCH v2] iwlwifi: mvm: fix unaligned read of rx_pkt_status
  • From: Wang Xuerui <wangxuerui@xxxxxxxxx>
• [PATCH] ila: Fix uninitialised return value in ila_xlat_nl_cmd_flush
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [mac80211-next:master 25/27] net/ipv6/ila/ila_xlat.c:420 ila_xlat_nl_cmd_flush() error: uninitialized symbol 'ret'.
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] brcmfmac: run firmware state watchdog on the host machine
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [RFC PATCH v3 02/12] nl80211/cfg80211: Extended Key ID support
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 08/12] iwlwifi: dvm - EXT_KEY_ID A-MPDU API update
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 07/12] iwlwifi: Extended Key ID support (NATIVE)
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 08/12] iwlwifi: dvm - EXT_KEY_ID A-MPDU API update
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 07/12] iwlwifi: Extended Key ID support (NATIVE)
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: pull-request: wireless-drivers-next 2019-02-22
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: pull-request: mac80211-next 2019-02-22
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: pull-request: mac80211 2019-02-22
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] mac80211: Change default tx_sk_pacing_shift to 7
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] brcmfmac: run firmware state watchdog on the host machine
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH 2/4] mt76: fix corrupted software generated tx CCMP PN
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• pull-request: wireless-drivers-next 2019-02-22
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/12] wil6210 patches
  • From: merez@xxxxxxxxxxxxxx
• [PATCH 07/21] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 08/21] wil6210: align to latest auto generated wmi.h
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 16/21] wil6210: fix report of rx packet checksum in edma mode
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 12/21] wil6210: update WIL_MCS_MAX to 15
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 14/21] wil6210: use OEM MAC address from OTP
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 20/21] wil6210: reset buff id in status message after completion
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 21/21] wil6210: print error in FW and board files load failures
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 19/21] wil6210: add support for ucode tracing
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 17/21] wil6210: fix return code of wmi_mgmt_tx and wmi_mgmt_tx_ext
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 18/21] wil6210: prevent access to RGF_CAF_ICR in Talyn
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 13/21] wil6210: check mid is valid
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 15/21] wil6210: free edma_rx_swtail upon reset
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 11/21] wil6210: do not set BIT_USER_SUPPORT_T_POWER_ON_0 in Talyn-MB
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 09/21] wil6210: prevent device memory access while in reset or suspend
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 10/21] wil6210: increase PCP stop command timeout
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 03/21] wil6210: support up to 20 stations in AP mode
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 06/21] wil6210: ignore HALP ICR if already handled
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 05/21] wil6210: fix invalid sta statistics update
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 04/21] wil6210: accessing 802.3 addresses via utility functions
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 01/21] wil6210: remove rtap_include_phy_info module param
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 02/21] wil6210: add option to drop Tx packets when Tx ring is full
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• [PATCH 00/21] wil6210 patches
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• Re: [PATCH] mac80211: Change default tx_sk_pacing_shift to 7
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• pull-request: mac80211-next 2019-02-22
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• pull-request: mac80211 2019-02-22
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mac80211: Change default tx_sk_pacing_shift to 7
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mac80211: Change default tx_sk_pacing_shift to 7
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH] cfg80211: reg: Fix use-after-free in call_crda
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] cfg80211: Include the PMK and PMKID in NL80211_CMD_EXTERNAL_AUTH
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mac80211: Change default tx_sk_pacing_shift to 7
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mac80211_hwsim::: propagate genlmsg_reply return code
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] mac80211: allocate tailroom for forwarded mesh packets
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH v3 2/3] mt76usb: use synchronous msg for mcu command responses
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v3 2/3] mt76usb: use synchronous msg for mcu command responses
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH] iw: allow to set wmm parameters from iw
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] net: dsa: fix a leaked reference by adding a missing of_node_put
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 2/3] mt76usb: use synchronous msg for mcu command responses
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH] cfg80211: reg: Fix use-after-free in call_crda
  • From: Yue Haibing <yuehaibing@xxxxxxxxxx>
• Re: [RFC PATCH v3 04/12] mac80211: Compatibility Extended Key ID support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iwlwifi: mvm: Use div_s64 instead of do_div in iwl_mvm_debug_range_resp
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH v3 05/12] mac80211: Mark A-MPDU keyid borders for drivers
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 03/12] mac80211: IEEE 802.11 Extended Key ID support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 02/12] nl80211/cfg80211: Extended Key ID support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iwlwifi: mvm: Use div_s64 instead of do_div in iwl_mvm_debug_range_resp
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• [PATCH] net: nfc: Fix NULL dereference on nfc_llcp_build_tlv fails
  • From: Yue Haibing <yuehaibing@xxxxxxxxxx>
• [PATCH 4/4] ath10k: Fix the wrong calculation ht_idx and idx of rate table for tx_stats
  • From: Surabhi Vishnoi <svishnoi@xxxxxxxxxxxxxx>
• [PATCH 3/4] ath10k: Fix the wrong updation of SGI in tx_stats debugfs
  • From: Surabhi Vishnoi <svishnoi@xxxxxxxxxxxxxx>
• [PATCH 2/4] ath10k: Fix the wrong updation of BW in tx_stats debugfs entry
  • From: Surabhi Vishnoi <svishnoi@xxxxxxxxxxxxxx>
• [PATCH 1/4] ath10k: Fix the incorrect updation of NSS data in tx stats
  • From: Surabhi Vishnoi <svishnoi@xxxxxxxxxxxxxx>
• [PATCH 0/4] Fix inconsistencies observed in population of tx_stats in debugfs
  • From: Surabhi Vishnoi <svishnoi@xxxxxxxxxxxxxx>
• [PATCH 5/5] net: dsa: fix a leaked reference by adding missing of_node_put
  • From: Wen Yang <wen.yang99@xxxxxxxxxx>
• [PATCH 3/5] mt76: fix a leaked reference by adding a missing of_node_put
  • From: Wen Yang <wen.yang99@xxxxxxxxxx>
• [PATCH 4/5] net: xilinx: fix a leaked reference by adding missing of_node_put
  • From: Wen Yang <wen.yang99@xxxxxxxxxx>
• [PATCH 2/5] net: mscc: ocelot: fix a leaked reference by adding a missing of_node_put
  • From: Wen Yang <wen.yang99@xxxxxxxxxx>
• [PATCH 1/5] net: dsa: fix a leaked reference by adding a missing of_node_put
  • From: Wen Yang <wen.yang99@xxxxxxxxxx>
• [PATCH v3] iw: Add support for controlling tx power for per station
  • From: Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] ath10k: add support for controlling tx power to a station
  • From: Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] mac80211: store tx power value from user to station
  • From: Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] cfg80211: Add support to set tx power for a station associated
  • From: Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxx>
• [PATCHv2 9/9] ath10k: Add extended TID configuration support
  • From: Tamizh chelvam <tamizhr@xxxxxxxxxxxxxx>
• [PATCHv2 8/9] ath10k: Add new api to support TID specific configuration
  • From: Tamizh chelvam <tamizhr@xxxxxxxxxxxxxx>
• [PATCHv2 7/9] ath10k: Add wmi command support for station specific TID config
  • From: Tamizh chelvam <tamizhr@xxxxxxxxxxxxxx>
• [PATCHv2 6/9] mac80211: Add api to support configuring TID specific configuration
  • From: Tamizh chelvam <tamizhr@xxxxxxxxxxxxxx>
• [PATCHv2 5/9] nl80211: Add netlink attribute to configure TID specific tx rate
  • From: Tamizh chelvam <tamizhr@xxxxxxxxxxxxxx>
• [PATCHv2 4/9] nl80211: Add netlink attribute to enable/disable RTS_CTS
  • From: Tamizh chelvam <tamizhr@xxxxxxxxxxxxxx>
• [PATCHv2 3/9] nl80211: Add netlink attribute for AMPDU aggregation enable/disable
  • From: Tamizh chelvam <tamizhr@xxxxxxxxxxxxxx>
• [PATCHv2 2/9] nl80211: Add new netlink attribute for TID speicific retry count
  • From: Tamizh chelvam <tamizhr@xxxxxxxxxxxxxx>
• [PATCHv2 1/9] nl80211: New netlink command for TID specific configuration
  • From: Tamizh chelvam <tamizhr@xxxxxxxxxxxxxx>
• [PATCHv2 0/9] cfg80211/mac80211: Add support for TID specific configuration
  • From: Tamizh chelvam <tamizhr@xxxxxxxxxxxxxx>
• Re: [PATCH v2] iwlwifi: mvm: Use div_s64 instead of do_div in iwl_mvm_debug_range_resp
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [PATCH] iw: allow to set wmm parameters from iw
  • From: Andrea Greco <a.greco@xxxxxxxxx>
• [PATCH 2/2] ath9K: debugfs: Fix SPUR-DOWN field
  • From: Andrea Greco <a.greco@xxxxxxxxx>
• [PATCH 1/2] nl80211: Allow change CW to Ad-Hock network
  • From: Andrea Greco <a.greco@xxxxxxxxx>
• Re: [RFC PATCH v3 00/12] Draft for Extended Key ID support
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [RFC PATCH v3 05/12] mac80211: Mark A-MPDU keyid borders for drivers
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 04/12] mac80211: Compatibility Extended Key ID support
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 03/12] mac80211: IEEE 802.11 Extended Key ID support
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• [PATCH 8/8] rtlwifi: rtl8192com: Fix blank line problems
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 7/8] rtlwifi: rtl8192cu: Fix problems with blank lines
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 6/8] rtlwifi: rtl8192ce: Fix missing blank lines
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 5/8] rtlwifi: Fix all blank line irregularities in main code files
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 4/8] rtlwifi: Fix blank line errors in main header files
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 2/8] rtlwifi: Fix problems with block comments in wifi.h
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 1/8] rtlwifi: Fix errors in spacing in wifi.h
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 3/8] rtlwifi: Fix alignment errors in wifi.h
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 0/8] rtlwifi: Fix some cosmetic errors
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [bug report] libertas_tf: don't defer firmware loading until start()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] mac80211: Change default tx_sk_pacing_shift to 7
  • From: Toke Høiland-Jørgensen <toke@xxxxxxxxxx>
• Re: [PATCH v2 2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH v2 2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• RE: [BUG] ath10k firmware crash 100% recreated this way
  • From: Chaoxing Lin <Chaoxing.Lin@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH v2 2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• [PATCH 4/4] ath10k: don't report unset rssi values to mac80211
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH 3/4] ath10k: sdio: reset chip on power_down()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH 2/4] ath10k: sdio: disable fwlog prints
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH 1/4] ath10k: sdio: set hi_acs_flags
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH 0/4] ath10k: small fixes for SDIO support
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH wireless-drivers-next 2/2] brcmfmac: print firmware reported general status errors
  • From: Rafał Miłecki <rafal@xxxxxxxxxx>
• Re: [PATCH v2 2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• [PATCH][next] rsi: fix missing null pointer check from a failed ieee80211_probereq_get call
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH wireless-drivers-next 2/2] brcmfmac: print firmware reported general status errors
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH wireless-drivers-next 2/2] brcmfmac: print firmware reported general status errors
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH wireless-drivers-next 1/2] brcmfmac: fix size of the struct msgbuf_ring_status
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH wireless-drivers-next] brcmfmac: add basic validation of shared RAM address
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH wireless-drivers-next] brcmfmac: add basic validation of shared RAM address
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH wireless-drivers-next] brcmfmac: add basic validation of shared RAM address
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: Does Linux Kernel 5.0-rc7 Support High Efficiency Wireless IEEE 802.11ax and IEEE 802.11ay (Wi-Fi Alliance Wi-Fi 6)?
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2] iwlwifi: mvm: Use div_s64 instead of do_div in iwl_mvm_debug_range_resp
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH wireless-drivers-next] brcmfmac: add basic validation of shared RAM address
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] iwlwifi: mvm: Use div64_s64 instead of do_div in iwl_mvm_debug_range_resp
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH] mt76: usb: fix warning in mt76u_buf_free
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] mt76: usb: fix warning in mt76u_buf_free
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] mt76: usb: fix warning in mt76u_buf_free
  • From: lorenzo@xxxxxxxxxx
• [PATCH 3/3] mt76: usb: simplify mt76u_tx_build_sg routine
  • From: lorenzo@xxxxxxxxxx
• [PATCH 2/3] mt76: usb: simplify rx buffer allocation
  • From: lorenzo@xxxxxxxxxx
• [PATCH 1/3] mt76: usb: introduce mt76u_fill_bulk_urb routine
  • From: lorenzo@xxxxxxxxxx
• [PATCH 0/3] simplify usb layer buffer allocation
  • From: lorenzo@xxxxxxxxxx
• Re: bug report: iwlwifi: mvm: support mac80211 TXQs model
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [bug report] mt76: usb: fix possible memory leak in mt76u_buf_free
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips
  • From: Grant Grundler <grundler@xxxxxxxxxx>
• Re: pull-request: iwlwifi-next 2019-02-20
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• pull-request: iwlwifi-next 2019-02-20
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH] iwlwifi: mvm: Use div64_s64 instead of do_div in iwl_mvm_debug_range_resp
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH v2 1/3] libertas_tf: move hardware callbacks to a separate structure
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH wireless-drivers-next] brcmfmac: add basic validation of shared RAM address
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH][next] rtlwifi: rtl8192ce: fix typo, "PairwiseENcAlgorithm" -> "PairwiseEncAlgorithm"
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH V4] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v3 3/3] mt76usb: remove usb_mcu.c
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH v3 2/3] mt76usb: use synchronous msg for mcu command responses
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH v3 1/3] mt76usb: allow mt76u_bulk_msg be used for reads
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• bug report: iwlwifi: mvm: support mac80211 TXQs model
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• [PATCH] ath10k: Add peer delete response event
  • From: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
• [RFC 3/3] mt76: usb: simplify mt76u_tx_build_sg routine
  • From: lorenzo@xxxxxxxxxx
• [RFC 2/3] mt76: usb: simplify rx buffer allocation
  • From: lorenzo@xxxxxxxxxx
• [RFC 1/3] mt76: usb: introduce mt76u_fill_bulk_urb routine
  • From: lorenzo@xxxxxxxxxx
• [RFC 0/3] simplify usb layer buffer allocation
  • From: lorenzo@xxxxxxxxxx
• Re: [PATCH v2 3/3] mt76usb: remove usb_mcu.c
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• update on netdev 0x13 conference
  • From: Jamal Hadi Salim <jhs@xxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH wireless-drivers-next] brcmfmac: add basic validation of shared RAM address
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH v2 3/3] mt76usb: remove usb_mcu.c
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH v2 2/3] mt76usb: use synchronous msg for mcu command responses
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH v2 1/3] mt76usb: allow mt76u_bulk_msg be used for reads
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH 00/20] iwlwifi: updates intended for v5.1 2019-02-15
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 00/20] iwlwifi: updates intended for v5.1 2019-02-15
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH 8/8] iwlwifi: add new cards for 22000 and killer series and change the market name
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 7/8] iwlwifi: add new card for 9260 series
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 5/8] iwlwifi: dbg_ini: implement Tx fifos dump
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 6/8] iwlwifi: dbg_ini: implement Rx fifos dump
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 3/8] iwlwifi: dbg_ini: make fill_range handler accept generic range pointer
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 4/8] iwlwifi: dbg_ini: add region to fill_header handler
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 2/8] iwlwifi: dbg_ini: make memory dump get_size handler include headers
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 1/8] iwlwifi: dbg_ini: add print to iwl_dump_ini_mem in case of invalid range
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 0/8] iwlwifi: updates intended for v5.1 2019-02-20
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 1/3] mt76usb: allow mt76u_bulk_msg be used for reads
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH 1/3] mt76usb: allow mt76u_bulk_msg be used for reads
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• RE: [PATCH v4 03/13] rtw88: hci files
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• [PATCH v2 3/3] libertas_tf: get the MAC address before registering the device
  • From: Lubomir Rintel <lkundrak@xxxxx>
• [PATCH v2 1/3] libertas_tf: move hardware callbacks to a separate structure
  • From: Lubomir Rintel <lkundrak@xxxxx>
• [PATCH v2 2/3] libertas_tf: don't defer firmware loading until start()
  • From: Lubomir Rintel <lkundrak@xxxxx>
• [PATCH v2 0/3] libertas_tf: fix setting the hardware address]
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Re: [PATCH] iwlwifi: mvm: Use div64_s64 instead of do_div in iwl_mvm_debug_range_resp
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [v2] cfg80211/nl80211: Offload OWE processing to user space in AP mode
  • From: Srinivas Dasari <dasaris@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] mt76usb: remove usb_mcu.c
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 2/3] mt76usb: use synchronous msg for mcu command responses
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 1/3] mt76usb: allow mt76u_bulk_msg be used for reads
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH wireless-drivers-next] brcmfmac: add basic validation of shared RAM address
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH 3/3] mt76usb: remove usb_mcu.c
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH 2/3] mt76usb: use synchronous msg for mcu command responses
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH 1/3] mt76usb: allow mt76u_bulk_msg be used for reads
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH] iwlwifi: mvm: Use div64_s64 instead of do_div in iwl_mvm_debug_range_resp
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH][next] rtlwifi: rtl8192ce: fix typo, "PairwiseENcAlgorithm" -> "PairwiseEncAlgorithm"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] mt76: usb: check urb->num_sgs limit in mt76u_process_rx_entry
  • From: lorenzo@xxxxxxxxxx
• [PATCH v2 11/20] iwlwifi: mvm: reject new beacons when in inject mode
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH] ath10k: switch to use SPDX license identifiers
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: change 'unsigned long int' to 'unsigned long'
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] cfg80211/nl80211: Offload OWE processing to user space in AP mode
  • From: dasaris@xxxxxxxxxxxxxx
• Re: [REGRESSION] mesh_pmksa_caching_oom test case fails
  • From: Masashi Honma <masashi.honma@xxxxxxxxx>
• [PATCH V4] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• netdev 0x13 schedule announced
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 03/12] mac80211: IEEE 802.11 Extended Key ID support
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [PATCH] iwlwifi: mvm: Use div64_s64 instead of do_div in iwl_mvm_debug_range_resp
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [PATCH] iwlwifi: mvm: Use div64_s64 instead of do_div in iwl_mvm_debug_range_resp
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• [PATCH] ath10k: switch to use SPDX license identifiers
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/5] rt2x00: remove unneeded check
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] carl9170: clean up a clamp() call
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtl818x_pci: Remove set but not used variables 'io_addr, mem_addr'
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] orinoco : Replace function name in string with __func__
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] mwifiex: don't advertise IBSS features without FW support
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH net] mwifiex: Fix NL80211_TX_POWER_LIMITED
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] libertas_tf: remove set but not used variable 'flags'
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] libertas_tf: move hardware callbacks to a separate structure
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] libertas_tf: fix signal reporting
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] libertas_tf: move the banner to a more appropriate place
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] libertas_tf: don't set URB_ZERO_PACKET on IN USB transfer
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] libertas_tf: lower the debug level of command trace
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rsi: remove set but not used variables 'info, vif'
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rsi: fix spelling mistakes
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rsi: fix a typo in a debug message
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] brcmfmac: remove set but not used variable 'old_state'
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] brcmfmac: rework bphy_err() to take struct brcmf_pub argument
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] brcmfmac: improve code handling bandwidth of firmware reported channels
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] brcmfmac: print firmware reported ring status errors
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] brcmfmac: assure SSID length from firmware is limited
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] rtlwifi: Remove CamelCase variables from base code
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v3 01/13] rtlwifi: Replace old-style license information
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: pull request: mt76 2019-02-18
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH v2] ath10k: Enable support for beacon interval per VAP
  • From: Dundi Raviteja <dundi@xxxxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH] ath10k: change 'unsigned long int' to 'unsigned long'
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [kbuild] [PATCH] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: MT76x2U crashes XHCI driver on AMD Ryzen system
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH] ath10k: update the max num of peers supported for WCN3990
  • From: Abhishek Ambure <aambure@xxxxxxxxxxxxxx>
• [PATCH] ath10k: Fill rx duration for each peer in fw_stats for WCN3990
  • From: Surabhi Vishnoi <svishnoi@xxxxxxxxxxxxxx>
• [LKP] [cfg80211] e005bd7dde: hwsim.autogo_ht_vht.fail
  • From: kernel test robot <rong.a.chen@xxxxxxxxx>
• Re: [PATCH] brcmfmac: remove set but not used variable 'old_state'
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH] ath10k: Add peer param map for tlv and non-tlv
  • From: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
• [PATCH] mac80211_hwsim::: propagate genlmsg_reply return code
  • From: Li RongQing <lirongqing@xxxxxxxxx>
• Re: [PATCH 1/2] wireless: mt76: call hweight8() instead of __sw_hweight8()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: pull-request: wireless-drivers 2019-02-18
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] x86: disable CONFIG_GENERIC_HWEIGHT and remove __HAVE_ARCH_SW_HWEIGHT
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] wireless: mt76: call hweight8() instead of __sw_hweight8()
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH net] mac80211: mesh: fix missing unlock on error in table_path_del()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH 1/2] wireless: mt76: call hweight8() instead of __sw_hweight8()
  • From: Borislav Petkov <bp@xxxxxxxxx>
• pull request: mt76 2019-02-18
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 3/4] mt76: fix resetting software IV flag on key delete
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 4/4] mt76: mt76x2: simplify per-chain signal strength handling
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 1/4] mt76: fix tx status timeout processing
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 2/4] mt76: fix corrupted software generated tx CCMP PN
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH 1/2] wireless: mt76: call hweight8() instead of __sw_hweight8()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] mt76: Use the correct hweight8() function
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] iwlwifi: mvm: fix an unaligned access
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH 1/2] wireless: mt76: call hweight8() instead of __sw_hweight8()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] mt76x02u: remove bogus check and comment padding
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: usb: use dev_err_ratelimited instead of dev_err in mt76u_complete_rx
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH RESEND 0/4] do not use sg if not properly supported by usb controller
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH wireless-drivers 0/3] fix multiple issues in mt76u error path
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: -Wimplicit-fallthrough not working with ccache
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] remove qid dependency from mt76-core code
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: pull-request: iwlwifi-next 2019-02-14
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] wireless: mt76: call hweight8() instead of __sw_hweight8()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: MT76x2U crashes XHCI driver on AMD Ryzen system
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH] carl9170: clean up a clamp() call
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• pull-request: wireless-drivers 2019-02-18
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] iwlwifi: mvm: fix an unaligned access
  • From: wangxuerui@xxxxxxxxx
• Re: MT76x2U crashes XHCI driver on AMD Ryzen system
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: MT76x2U crashes XHCI driver on AMD Ryzen system
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH net-next] cfg80211: pmsr: use eth_broadcast_addr() to assign broadcast address
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH net-next] cfg80211: pmsr: use eth_broadcast_addr() to assign broadcast address
  • From: maowenan <maowenan@xxxxxxxxxx>
• Re: [PATCH net-next] cfg80211: pmsr: use eth_broadcast_addr() to assign broadcast address
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH net-next] cfg80211: pmsr: use eth_broadcast_addr() to assign broadcast address
  • From: maowenan <maowenan@xxxxxxxxxx>
• brcmfmac auto channel selection
  • From: Francesco Chiechi - Colibre <francesco.chiechi@xxxxxxxxxx>
• [PATCH net] mac80211: mesh: fix missing unlock on error in table_path_del()
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [v3 PATCH 0/4] mac80211: Fix incorrect usage of rhashtable walk API
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mac80211: mesh: fix missing unlock on error in table_path_del()
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH] carl9170: clean up a clamp() call
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/2] x86: disable CONFIG_GENERIC_HWEIGHT and remove __HAVE_ARCH_SW_HWEIGHT
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [PATCH] brcmfmac: remove set but not used variable 'old_state'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] rtl818x_pci: Remove set but not used variables 'io_addr, mem_addr'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] rsi: remove set but not used variables 'info, vif'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] mac80211: mesh: fix missing unlock on error in table_path_del()
  • From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
• [PATCH 1/2] wireless: mt76: call hweight8() instead of __sw_hweight8()
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH] ath10k: remove the calibration data fetch for sdio
  • From: Wen Gong <wgong@xxxxxxxxxxxxxx>
• [PATCH 2/2] x86: disable CONFIG_GENERIC_HWEIGHT and remove __HAVE_ARCH_SW_HWEIGHT
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 0/2] x86: turn off wrongly enabled CONFIG_GENERIC_HWEIGHT
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 3/3] mac80211: probe unexercised mesh links
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• [PATCH 2/3] mac80211: add option for setting control flags
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• [PATCH 1/3] cfg80211: add support to probe unexercised mesh link
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• [PATCH 0/3] wireless: Add support to probe unexercised mesh link
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] remove qid dependency from mt76-core code
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• [LKP] [cfg80211] 313ad55382: hwsim.fils_sk_pfs_30.fail
  • From: kernel test robot <rong.a.chen@xxxxxxxxx>
• [PATCH] orinoco : Replace function name in string with __func__
  • From: Keyur Patel <iamkeyur96@xxxxxxxxx>
• Re: [RFC PATCH v3 02/12] nl80211/cfg80211: Extended Key ID support
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mac80211: probe unexercised mesh links
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• Re: Kernel hangs on regulatory.db X.509 key initialization
  • From: Dominik Schmidt <dominik@xxxxxxxxxx>
• [PATCH v2] ath10k: wait for vdev delete response from firmware
  • From: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
• Re: Kernel hangs on regulatory.db X.509 key initialization
  • From: "Maciej S. Szmigiero" <mail@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] wireless-regdb: Sync IN with G.S.R. 1048(E), October 2018
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [PATCH] wireless-regdb: update 60ghz band rules for us
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• preparing for 802.11ah channels
  • From: thomas pedersen <thomas@xxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH 2/2] mt76: move txq qid dependency in driver specific code
  • From: lorenzo@xxxxxxxxxx
• [PATCH 1/2] mt76: add qid parameter to mt76_tx signature
  • From: lorenzo@xxxxxxxxxx
• [PATCH 0/2] remove qid dependency from mt76-core code
  • From: lorenzo@xxxxxxxxxx
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• -Wimplicit-fallthrough not working with ccache
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH net-next] cfg80211: pmsr: use eth_broadcast_addr() to assign broadcast address
  • From: Mao Wenan <maowenan@xxxxxxxxxx>
• Re: [PATCH] cfg80211/nl80211: Offload OWE processing to user space in AP mode
  • From: Sergey Matyukevich <sergey.matyukevich.os@xxxxxxxxxxxxx>
• Re: pull-request: mac80211 2019-02-15
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [Make-wifi-fast] [RFC/RFT] mac80211: Switch to a virtual time-based airtime scheduler
  • From: Dave Taht <dave.taht@xxxxxxxxx>
• [PATCH] cfg80211/nl80211: Offload OWE processing to user space in AP mode
  • From: Srinivas Dasari <dasaris@xxxxxxxxxxxxxx>
• [RFC/RFT] mac80211: Switch to a virtual time-based airtime scheduler
  • From: Toke Høiland-Jørgensen <toke@xxxxxxxxxx>
• [PATCH] ath9k: Make sure to zero status.tx_time before reporting TX status
  • From: Toke Høiland-Jørgensen <toke@xxxxxxxxxx>
• [BUG] ath10k firmware crash 100% recreated this way
  • From: Chaoxing Lin <Chaoxing.Lin@xxxxxxxxxxxxxx>
• [PATCH] ath10k: Fix length of wmi tlv command for protected mgmt frames
  • From: Surabhi Vishnoi <svishnoi@xxxxxxxxxxxxxx>
• [PATCH] brcmfmac: rework bphy_err() to take struct brcmf_pub argument
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• pull-request: mac80211 2019-02-15
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC 2/2] ath10k: Add QCA vendor command/attr support to filterneighbor BSS frames
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 3.18 15/16] cfg80211: extend range deviation for DMG
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [v3 PATCH 0/4] mac80211: Fix incorrect usage of rhashtable walk API
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 08/12] iwlwifi: dvm - EXT_KEY_ID A-MPDU API update
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 07/12] iwlwifi: Extended Key ID support (NATIVE)
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 14/20] iwlwifi: mvm: Set TX_CMD_FLG_PROT_REQUIRE correctly
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 16/20] iwlwifi: mvm: Allow retries for probe responses
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [RFC PATCH v3 05/12] mac80211: Mark A-MPDU keyid borders for drivers
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 18/20] iwlwifi: remove redundant condition from prior alive dump flow
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 13/20] iwlwifi: mvm: support non-transmitting AP
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 15/20] iwlwifi: mvm: remove IWL_MVM_INIT_STATUS_REG_HW_INIT_COMPLETE
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 17/20] iwlwifi: mvm: implement VHT extended NSS support in rs.c
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 19/20] iwlwifi: mvm: add some debug data to TX path
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 20/20] iwlwifi: dbg_ini: fix infinite time ignore consecutive dumps
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 12/20] iwlwifi: mvm: add read debugfs for he_sniffer_params
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 11/20] iwlwifi: mvm: reject new beacons when in inject mode
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 10/20] iwlwifi: iwl-drv: no need to check return value of debugfs_create functions
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 09/20] iwlwifi: fw: no need to check return value of debugfs_create functions
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 08/20] iwlwifi: dvm: no need to check return value of debugfs_create functions
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 04/20] iwlwifi: eeprom-parse: use struct_size() in kzalloc()
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 07/20] iwlwifi: nvm-parse: advertise IEEE80211_VHT_EXT_NSS_BW_CAPABLE in VHT
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 05/20] iwlwifi: nvm-parse: use struct_size() in kzalloc()
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 06/20] iwlwifi: mvm: fix error path in iwl_mvm_mac_setup_register()
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 03/20] iwlwifi: fix false-positive maybe-uninitialized warning
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 02/20] iwlwifi: mvm: Don't request HW restart if already requested
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 01/20] iwlwifi: pcie: allocate rb_stts's for all queues in one place
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 00/20] iwlwifi: updates intended for v5.1 2019-02-15
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [RFC PATCH v3 00/12] Draft for Extended Key ID support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 04/12] mac80211: Compatibility Extended Key ID support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 03/12] mac80211: IEEE 802.11 Extended Key ID support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/8] rtlwifi: Remove CamelCase variables from all drivers
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 02/12] nl80211/cfg80211: Extended Key ID support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] cfg80211: add support to probe unexercised mesh link
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mac80211: probe unexercised mesh links
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH V3] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH V3] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH V3] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH] mac80211: Restore vif beacon interval if start ap fails
  • From: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
• Re: [PATCH V3] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH] ath10k: Enhance logging for vdev pdev & peer set param
  • From: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
• [PATCH] ath10k: wait for vdev delete response from firmware
  • From: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH V3] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: brcmfmac: NULL pointer dereference during brcmf_detach() after firmware crash
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH AUTOSEL 4.20 70/77] mac80211: don't initiate TDLS connection if station is not associated to AP
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 72/77] cfg80211: extend range deviation for DMG
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 71/77] mac80211: Add attribute aligned(2) to struct 'action'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 29/65] mac80211: fix miscounting of ttl-dropped frames
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 59/65] mac80211: don't initiate TDLS connection if station is not associated to AP
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 61/65] cfg80211: extend range deviation for DMG
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 60/65] mac80211: Add attribute aligned(2) to struct 'action'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 37/40] mac80211: Add attribute aligned(2) to struct 'action'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 38/40] cfg80211: extend range deviation for DMG
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 36/40] mac80211: don't initiate TDLS connection if station is not associated to AP
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 12/27] mac80211: fix miscounting of ttl-dropped frames
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 24/27] mac80211: Add attribute aligned(2) to struct 'action'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 23/27] mac80211: don't initiate TDLS connection if station is not associated to AP
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 25/27] cfg80211: extend range deviation for DMG
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• RE: [PATCH v5 00/13] rtw88: mac80211 driver for Realtek 802.11ac wireless network chips
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• [PATCH AUTOSEL 4.4 10/20] mac80211: fix miscounting of ttl-dropped frames
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 18/20] mac80211: don't initiate TDLS connection if station is not associated to AP
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 19/20] cfg80211: extend range deviation for DMG
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 3.18 07/16] mac80211: fix miscounting of ttl-dropped frames
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 3.18 14/16] mac80211: don't initiate TDLS connection if station is not associated to AP
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 3.18 15/16] cfg80211: extend range deviation for DMG
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 18/40] mac80211: fix miscounting of ttl-dropped frames
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 36/77] mac80211: fix miscounting of ttl-dropped frames
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] mwifiex: don't advertise IBSS features without FW support
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH v2] cfg80211: Report Association Request frame IEs in association events
  • From: Jouni Malinen <jouni@xxxxxxxxxxxxxx>
• WARN-ON in eee80211_vif_release_channel in 4.20.2+, ath10k
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 03/13] rtw88: hci files
  • From: Grant Grundler <grundler@xxxxxxxxxxxx>
• [PATCH 6/8] rtlwifi: rtl8192se: Remove CamelCase variables
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 5/8] rtlwifi: rtl8188de: Remove CamelCase variables
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 8/8] rtlwifi: rtl8821ae: Remove CamelCase variables
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 4/8] rtlwifi: rtl8192{c,u}: Remove CamelCase variables
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: brcmfmac: NULL pointer dereference during brcmf_detach() after firmware crash
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 7/8] rtlwifi: rtl8723{be,ae}: Remove CamelCase variables
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 3/8] rtlwifi: rtl8188ee: Remove CamelCase variable
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 1/8] rtlwifi: Remove CamelCase variables from base code
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 2/8] rtlwifi: btcoexist: Remove CamelCase variable
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 0/8] rtlwifi: Remove CamelCase variables from all drivers
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• brcmfmac: NULL pointer dereference during brcmf_detach() after firmware crash
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH] cfg80211: Report Association Request frame IEs in association events
  • From: Jouni Malinen <jouni@xxxxxxxxxxxxxx>
• [PATCH v3 12/13] rtlwifi: rtl8723_common: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 13/13] rtlwifi: rtl8821ae: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 10/13] rtlwifi: rtl8723ae: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 11/13] rtlwifi: rtl8723be: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 09/13] rtlwifi: rtl8192se: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 08/13] rtlwifi: rtl8192ee: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 07/13] rtlwifi: rtl8192de: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 06/13] rtlwifi: rtl8192cu: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 05/13] rtlwifi: rtl8192ce: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 04/13] rtlwifi: rtl8192com: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 03/13] rtlwifi: rtl8188ee: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 02/13] rtlwifi: btcoex: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 01/13] rtlwifi: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v3 00/13] rtlwifi: Replace old-style license info with SPDX form
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH v2 02/13] rtlwifi: btcoex: Replace old-style license information
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/13] rtlwifi: Replace old-style license information
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH v2 13/13] rtlwifi: rtl8821ae: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 12/13] rtlwifi: rtl8723_common: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 06/13] rtlwifi: rtl8192cu: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 11/13] rtlwifi: rtl8723be: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 10/13] rtlwifi: rtl8723ae: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 09/13] rtlwifi: rtl8192se: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 08/13] rtlwifi: rtl8192ee: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 07/13] rtlwifi: rtl8192de: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 05/13] rtlwifi: rtl8192ce: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 04/13] rtlwifi: rtl8192com: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 03/13] rtlwifi: rtl8188ee: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 02/13] rtlwifi: btcoex: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 01/13] rtlwifi: Replace old-style license information
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH v2 00/13] rtlwifi: Replace old-style license info with SPDX form
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH v2 01/12] wil6210: remove rtap_include_phy_info module param
  • From: merez@xxxxxxxxxxxxxx
• [PATCH v2 2/2] mt76: dma: move mt76x02_init_{tx,rx}_queue in mt76 module
  • From: lorenzo@xxxxxxxxxx
• [PATCH v2 1/2] mt76: mmio: move mt76x02_set_irq_mask in mt76 module
  • From: lorenzo@xxxxxxxxxx
• [PATCH v2 0/2] move dma shared code in mt76 module
  • From: lorenzo@xxxxxxxxxx
• Re: [PATCH] libertas_tf: remove set but not used variable 'flags'
  • From: Steve deRosier <derosier@xxxxxxxxx>
• Re: [PATCH 2/4] mac80211: Free mpath object when rhashtable insertion fails
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] mac80211: Use rhashtable_lookup_get_insert_fast instead of racy code
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] mac80211: Use linked list instead of rhashtable walk for mesh tables
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] rhashtable: Remove obsolete rhashtable_walk_init function
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] mac80211: Free mpath object when rhashtable insertion fails
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [v3 PATCH 0/4] mac80211: Fix incorrect usage of rhashtable walk API
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] mac80211: probe unexercised mesh links
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• [PATCH 1/2] cfg80211: add support to probe unexercised mesh link
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• [PATCH 0/2] wireless: Add support to probe unexercised mesh link
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• [PATCH V2] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH 5/6] brcmfmac: check and dump trap info during sdio probe
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 6/6] brcmfmac: use chipname in brcmf_fw_alloc_request() for error path as well
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 3/6] brcmfmac: create debugfs files for bus-specific layer
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 1/6] brcmfmac: assure SSID length from firmware is limited
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 2/6] brcmfmac: add subtype check for event handling in data path
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 4/6] brcmfmac: disable MBSS feature for bcm4330 device
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 0/6] brcmfmac: smallish series
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: PROBLEM: Oops - Null pointer dereference in brcm80211/brcmfmac [BCM4350]
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• pull-request: iwlwifi-next 2019-02-14
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 2/4] mac80211: Free mpath object when rhashtable insertion fails
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH v2 09/24] rtw88: 8822c: update phy parameter to v27
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 03/24] rtw88: can not support vif beacon filter actually
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 17/24] rtw88: 8822c: fix RSC setting
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 05/24] rtw88: add a delay after writing a rf register
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 13/24] rtw88: add 8822c tx power index table parsing support
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 19/24] rtw88: 8822c: do not reset MAC Rx before sending CCK packet
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 10/24] rtw88: 8822c: update channel setting
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 15/24] rtw88: extract utility functions into util.c
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 16/24] rtw88: 8822c: add support for DACK
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 24/24] rtw88: 8822b: turn rtw_write32s_mask into macro
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 23/24] rtw88: fix slot time value
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 22/24] rtw88: set OFDM ctx to receive ack after cts2self
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 21/24] rtw88: do not count dummy tail into rx counter
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 20/24] rtw88: 8822c: parse packet by sigb length
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 14/24] rtw88: add 8822c tx agc support
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 18/24] rtw88: 8822c: set ack timeout
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 06/24] rtw88: 8822c: correct crystal setting
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 12/24] rtw88: add module param to switch lps supportability
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 11/24] rtw88: 8822c: update trx mode setting
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 07/24] rtw88: 8822c: update efuse table as released
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 08/24] rtw88: 8822c: update pwr_seq to v12
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 01/24] rtw88: report correct tx status if mac80211 requested one
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 04/24] rtw88: fix incorrect bit definition for RF mode
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 00/24] rtw88: major fixes for 8822c to have stable functionalities
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 02/24] rtw88: add get_c2h_from_skb for extracting c2h commands
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 10/13] rtw88: 8822B init table
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 11/13] rtw88: 8822C init table
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 09/13] rtw88: chip files
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 02/13] rtw88: core files
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 01/13] rtw88: main files
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 08/13] rtw88: debug files
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 06/13] rtw88: fw and efuse files
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 07/13] rtw88: phy files
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 13/13] rtw88: add MAINTAINERS entry
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 03/13] rtw88: hci files
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 12/13] rtw88: Kconfig & Makefile
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 00/13] rtw88: mac80211 driver for Realtek 802.11ac wireless network chips
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 05/13] rtw88: mac files
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v5 04/13] rtw88: trx files
  • From: <yhchuang@xxxxxxxxxxx>
• Re: [PATCH 0/4] cfg80211/mac80211: Add support for TID specific configuration
  • From: Tamizh chelvam <tamizhr@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iwlwifi: Use struct_size() in kzalloc
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH v2 1/2] iwlwifi: Use kmemdup instead of duplicating its function
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH 2/2] mac80211: Free mpath object when rhashtable insertion fails
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] ath10k: correct the format of host memory chunks in wmi init command
  • From: Yu Wang <yyuwang@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 09/12] ath: Basic Extended Key ID support (COMPAT+NATIVE)
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• [PATCH 2/2] mt76: dma: move mt76x02_init_{tx,rx}_queue in mt76 module
  • From: lorenzo@xxxxxxxxxx
• [PATCH 1/2] mt76: mmio: move mt76x02_set_irq_mask in mt76 module
  • From: lorenzo@xxxxxxxxxx
• [PATCH 0/2] move dma shared code in mt76 module
  • From: lorenzo@xxxxxxxxxx
• Re: PROBLEM: Oops - Null pointer dereference in brcm80211/brcmfmac [BCM4350]
  • From: Aaron Blair <aaron@xxxxxxxxxx>
• Re: [PATCH v4 03/13] rtw88: hci files
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH] NFC: pn533: mark expected switch fall-throughs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] cfg80211/mac80211: Add support for TID specific configuration
  • From: Sergey Matyukevich <sergey.matyukevich.os@xxxxxxxxxxxxx>
• Re: [PATCH v2 01/12] wil6210: remove rtap_include_phy_info module param
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] mac80211: Free mpath object when rhashtable insertion fails
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [v2 PATCH 0/4] mac80211: Fix incorrect usage of rhashtable walk API
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 3/4] mac80211: Use rhashtable_lookup_get_insert_fast instead of racy code
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] rhashtable: Remove obsolete rhashtable_walk_init function
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] mac80211: Use linked list instead of rhashtable walk for mesh tables
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] mac80211: Free mpath object when rhashtable insertion fails
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [v2 PATCH 0/4] mac80211: Fix incorrect usage of rhashtable walk API
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH] ath10k: Report low ack rssi based on the reason code
  • From: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
• [PATCH net] mwifiex: Fix NL80211_TX_POWER_LIMITED
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• Re: [PATCH 1/2] mac80211: Use linked list instead of rhashtable walk for mesh tables
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mac80211: Free mpath object when rhashtable insertion fails (fwd)
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] rhashtable: Remove obsolete rhashtable_walk_init function
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: Oops - Null pointer dereference in brcm80211/brcmfmac [BCM4350]
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 2/2] mac80211: Free mpath object when rhashtable insertion fails (fwd)
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH] brcmfmac: use bphy_err() in all wiphy-related code
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• RE: [PATCH v4 03/13] rtw88: hci files
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• Re: [RFC PATCH v3 09/12] ath: Basic Extended Key ID support (COMPAT+NATIVE)
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] ath10k: Add support for ack rssi value of data tx packets
  • From: Abhishek Ambure <aambure@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] ath10k: Add support for ack rssi value of management tx packets
  • From: Abhishek Ambure <aambure@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] Add support for ack rssi values of all data and
  • From: Abhishek Ambure <aambure@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v5 5/5] rt2800: comment and simplify AGC init for RT6352
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH v5 4/5] rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH v5 3/5] rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH v5 2/5] rt2x00: remove confusing AGC register
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH v5 1/5] rt2x00: remove unneeded check
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH v5 0/5] rt2800: register programing tweaks and clean ups
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• REMINDER: wireless workshop @ netdev 0x13
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• RE: [PATCH v4 03/13] rtw88: hci files
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• Re: linux-next: Tree for Feb 11 (wireless/80211)
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH 11/20 v3] iwlwifi: mvm: add debug prints for FTM
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH] rhashtable: Remove obsolete rhashtable_walk_init function
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH] mac80211: Use rhashtable_lookup_get_insert_fast instead of racy code
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] mac80211: Use linked list instead of rhashtable walk for mesh tables
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] mac80211: Free mpath object when rhashtable insertion fails
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] mac80211: Fix incorrect usage of rhashtable walk API
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] rhashtable: make walk safe from softirq context
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH] libertas_tf: remove set but not used variable 'flags'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH] ath10k: Enable support for beacon interval per VAP
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v4 03/13] rtw88: hci files
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH v2] rhashtable: make walk safe from softirq context
  • From: Bob Copeland <me@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] ath10k: Add support for ack rssi value of management tx packets
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: Enable support for beacon interval per VAP
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] rhashtable: make walk safe from softirq context
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH wireless-drivers 0/3] fix multiple issues in mt76u error path
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] ath10k: add missing values to wmi_service_name()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: report tx airtime provided by fw
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ath10k: add dynamic vlan support
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: Add support to configure ftm responder role
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] ath9k: Switch to mac80211 TXQ scheduling and airtime APIs
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] rhashtable: make walk safe from softirq context
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] ath10k: fix line length warning in ath10k_ce_alloc_dest_ring()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] NFC: st21nfca: Fix a couple of fall-through warnings
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: pull-request: mac80211 2019-02-12
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: RTL8723bu: poor signal and connection troubles
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• [PATCH] mt76: Use the correct hweight8() function
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v2 2/3] rt2x00: check number of EPROTO errors
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH] ath10k: Enable support for beacon interval per VAP
  • From: Dundi Raviteja <dundi@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] do not use sg if not properly supported by usb controller
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH RESEND 4/4] mt76: usb: introduce disable_usb_sg parameter
  • From: lorenzo@xxxxxxxxxx
• [PATCH RESEND 3/4] mt76: usb: use a linear buffer for tx/rx datapath if sg is not supported
  • From: lorenzo@xxxxxxxxxx
• [PATCH RESEND 2/4] mt76: usb: do not use sg buffers for mcu messages
  • From: lorenzo@xxxxxxxxxx
• [PATCH RESEND 1/4] mt76: usb: move mt76u_check_sg in usb.c
  • From: lorenzo@xxxxxxxxxx
• [PATCH RESEND 0/4] do not use sg if not properly supported by usb controller
  • From: lorenzo@xxxxxxxxxx
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: pull-request mwifiex-firmware 2019-02-12
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• Re: [PULL] ath10k firmware 2019-02-01
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• [PATCH v2 2/2] ath10k: Add support for ack rssi value of data tx packets
  • From: Abhishek Ambure <aambure@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] ath10k: Add support for ack rssi value of management tx packets
  • From: Abhishek Ambure <aambure@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] Add support for ack rssi values of all data and
  • From: Abhishek Ambure <aambure@xxxxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• pull-request: mac80211 2019-02-12
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] rsi: fix spelling mistakes
  • From: Siva Rebbagondla <siva8118@xxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH] mt76x02u: remove bogus check and comment padding
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• RE: [PATCH v4 06/13] rtw88: fw and efuse files
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• [PATCH 11/20 v2] iwlwifi: mvm: add debug prints for FTM
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH] ath10k: Fix descriptor size in ce tx completion for WCN3990
  • From: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
• RE: [PATCH v4 03/13] rtw88: hci files
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• pull-request mwifiex-firmware 2019-02-12
  • From: Ganapathi Bhat <gbhat@xxxxxxxxxxx>
• PROBLEM: Oops - Null pointer dereference in brcm80211/brcmfmac [BCM4350]
  • From: Aaron Blair <aaron@xxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH] mt76: usb: use dev_err_ratelimited instead of dev_err in mt76u_complete_rx
  • From: lorenzo@xxxxxxxxxx
• [PATCH 2/2] brcmfmac: support firmware reporting 160 MHz channels
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH 1/2] brcmfmac: improve code handling bandwidth of firmware reported channels
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• brcmfmac: race in init path related to the wiphy_register() call
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH 01/24] rtw88: report correct tx status if mac80211 requested one
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH] mt76x02u: use usb_bulk_msg to upload firmware
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH 0/2] mt76x0: initialize per-channel max_power
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: change the retun type of mt76_dma_attach()
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH v4 03/13] rtw88: hci files
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: linux-next: Tree for Feb 11 (wireless/80211)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 2/3] iw: Add printing of station tx duration and airtime weight
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• [PATCH 3/3] iw: Print airtime fairness feature
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• [PATCH 1/3] iw: Add command to set airtime weight
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>