Firmware name for UTF mode of SDIO has changed from utf-2.bin to
utf-sdio-2.bin, so it need to change in ath10k, otherwise it will
fail for UTF mode.
After change the name in ath10k, it will success for UTF mode of
SDIO/USB.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/hw.h | 2 ++
drivers/net/wireless/ath/ath10k/testmode.c | 17 ++++++++++++++++-
2 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 7131499..d4fc13d 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -151,6 +151,8 @@ enum qca9377_chip_id_rev {
#define ATH10K_FW_UTF_FILE "utf.bin"
#define ATH10K_FW_UTF_API2_FILE "utf-2.bin"
+#define ATH10K_FW_UTF_FILE_BASE "utf"
+
/* includes also the null byte */
#define ATH10K_FIRMWARE_MAGIC "QCA-ATH10K"
#define ATH10K_BOARD_MAGIC "QCA-ATH10K-BOARD"
diff --git a/drivers/net/wireless/ath/ath10k/testmode.c b/drivers/net/wireless/ath/ath10k/testmode.c
index 6433ff1..da9c596 100644
--- a/drivers/net/wireless/ath/ath10k/testmode.c
+++ b/drivers/net/wireless/ath/ath10k/testmode.c
@@ -174,8 +174,23 @@ static int ath10k_tm_fetch_firmware(struct ath10k *ar)
{
struct ath10k_fw_components *utf_mode_fw;
int ret;
+ char fw_name[100];
+ int fw_api2 = 2;
+
+ switch (ar->hif.bus) {
+ case ATH10K_BUS_SDIO:
+ case ATH10K_BUS_USB:
+ scnprintf(fw_name, sizeof(fw_name), "%s-%s-%d.bin",
+ ATH10K_FW_UTF_FILE_BASE, ath10k_bus_str(ar->hif.bus),
+ fw_api2);
+ break;
+ default:
+ scnprintf(fw_name, sizeof(fw_name), "%s-%d.bin",
+ ATH10K_FW_UTF_FILE_BASE, fw_api2);
+ break;
+ }
- ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_UTF_API2_FILE,
+ ret = ath10k_core_fetch_firmware_api_n(ar, fw_name,
&ar->testmode.utf_mode_fw.fw_file);
if (ret == 0) {
ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode using fw utf api 2");
--
1.9.1
