Search Linux Wireless

[PATCH 02/11] rtw88: do not use (void *) as argument

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>

The type change from (void *) to (struct rtw_dev *) is redundant.
Just pass the right type and compiler can check that for us.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>
---
 drivers/net/wireless/realtek/rtw88/phy.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/phy.c b/drivers/net/wireless/realtek/rtw88/phy.c
index ed104ea..d4bcc89 100644
--- a/drivers/net/wireless/realtek/rtw88/phy.c
+++ b/drivers/net/wireless/realtek/rtw88/phy.c
@@ -1079,11 +1079,10 @@ static void phy_get_rate_values_of_txpwr_by_rate(struct rtw_dev *rtwdev,
 	}
 }
 
-static void phy_store_tx_power_by_rate(void *adapter,
+static void phy_store_tx_power_by_rate(struct rtw_dev *rtwdev,
 				       u32 band, u32 rfpath, u32 txnum,
 				       u32 regaddr, u32 bitmask, u32 data)
 {
-	struct rtw_dev *rtwdev = adapter;
 	struct rtw_hal *hal = &rtwdev->hal;
 	u8 rate_num = 0;
 	u8 rate;
@@ -1510,10 +1509,9 @@ static s8 phy_get_tx_power_limit(struct rtw_dev *rtwdev, u8 band,
 }
 
 static
-u8 phy_get_tx_power_index(void *adapter, u8 rf_path, u8 rate,
+u8 phy_get_tx_power_index(struct rtw_dev *rtwdev, u8 rf_path, u8 rate,
 			  enum rtw_bandwidth bandwidth, u8 channel, u8 regd)
 {
-	struct rtw_dev *rtwdev = adapter;
 	struct rtw_hal *hal = &rtwdev->hal;
 	struct rtw_txpwr_idx *pwr_idx;
 	u8 tx_power;
@@ -1553,9 +1551,9 @@ u8 phy_get_tx_power_index(void *adapter, u8 rf_path, u8 rate,
 	return tx_power;
 }
 
-static void phy_set_tx_power_index_by_rs(void *adapter, u8 ch, u8 path, u8 rs)
+static void phy_set_tx_power_index_by_rs(struct rtw_dev *rtwdev,
+					 u8 ch, u8 path, u8 rs)
 {
-	struct rtw_dev *rtwdev = adapter;
 	struct rtw_hal *hal = &rtwdev->hal;
 	u8 regd = rtwdev->regd.txpwr_regd;
 	u8 *rates;
@@ -1573,7 +1571,7 @@ static void phy_set_tx_power_index_by_rs(void *adapter, u8 ch, u8 path, u8 rs)
 	bw = hal->current_band_width;
 	for (i = 0; i < size; i++) {
 		rate = rates[i];
-		pwr_idx = phy_get_tx_power_index(adapter, path, rate, bw, ch,
+		pwr_idx = phy_get_tx_power_index(rtwdev, path, rate, bw, ch,
 						 regd);
 		hal->tx_pwr_tbl[path][rate] = pwr_idx;
 	}
-- 
2.7.4




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux