Enable NL80211_IFTYPE_MESH_POINT and update its path.
Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
---
Changes since v2 - remove unused definitions
---
drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 +
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 5 ++++-
drivers/net/wireless/mediatek/mt76/mt7615/mcu.h | 6 ------
4 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
index 59f604f3161f..f860af6a42da 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
@@ -133,6 +133,9 @@ static const struct ieee80211_iface_limit if_limits[] = {
{
.max = MT7615_MAX_INTERFACES,
.types = BIT(NL80211_IFTYPE_AP) |
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
BIT(NL80211_IFTYPE_STATION)
}
};
@@ -195,6 +198,9 @@ int mt7615_register_device(struct mt7615_dev *dev)
dev->mt76.antenna_mask = 0xf;
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
BIT(NL80211_IFTYPE_AP);
ret = mt76_register_device(&dev->mt76, true, mt7615_rates,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index b0bb7cc12385..585e67fa2728 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask)
switch (type) {
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
/* ap use hw bssid 0 and ext bssid */
if (~mask & BIT(HW_BSSID_0))
return HW_BSSID_0;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index 43f70195244c..8b8db526cb16 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev,
switch (vif->type) {
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
tx_wlan_idx = mvif->sta.wcid.idx;
conn_type = CONNECTION_INFRA_AP;
break;
@@ -968,7 +969,8 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif,
.rx_wtbl = {
.tag = cpu_to_le16(WTBL_RX),
.len = cpu_to_le16(sizeof(struct wtbl_rx)),
- .rca1 = vif->type != NL80211_IFTYPE_AP,
+ .rca1 = vif->type != (NL80211_IFTYPE_AP ||
+ NL80211_IFTYPE_MESH_POINT),
.rca2 = 1,
.rv = 1,
},
@@ -1042,6 +1044,7 @@ static void sta_rec_convert_vif_type(enum nl80211_iftype type, u32 *conn_type)
{
switch (type) {
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
if (conn_type)
*conn_type = CONNECTION_INFRA_STA;
break;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
index e96efb13fa4d..0915cb735699 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
@@ -105,25 +105,19 @@ enum {
#define STA_TYPE_STA BIT(0)
#define STA_TYPE_AP BIT(1)
#define STA_TYPE_ADHOC BIT(2)
-#define STA_TYPE_TDLS BIT(3)
#define STA_TYPE_WDS BIT(4)
#define STA_TYPE_BC BIT(5)
#define NETWORK_INFRA BIT(16)
#define NETWORK_P2P BIT(17)
#define NETWORK_IBSS BIT(18)
-#define NETWORK_MESH BIT(19)
-#define NETWORK_BOW BIT(20)
#define NETWORK_WDS BIT(21)
#define CONNECTION_INFRA_STA (STA_TYPE_STA | NETWORK_INFRA)
#define CONNECTION_INFRA_AP (STA_TYPE_AP | NETWORK_INFRA)
#define CONNECTION_P2P_GC (STA_TYPE_STA | NETWORK_P2P)
#define CONNECTION_P2P_GO (STA_TYPE_AP | NETWORK_P2P)
-#define CONNECTION_MESH_STA (STA_TYPE_STA | NETWORK_MESH)
-#define CONNECTION_MESH_AP (STA_TYPE_AP | NETWORK_MESH)
#define CONNECTION_IBSS_ADHOC (STA_TYPE_ADHOC | NETWORK_IBSS)
-#define CONNECTION_TDLS (STA_TYPE_STA | NETWORK_INFRA | STA_TYPE_TDLS)
#define CONNECTION_WDS (STA_TYPE_WDS | NETWORK_WDS)
#define CONNECTION_INFRA_BC (STA_TYPE_BC | NETWORK_INFRA)
--
2.18.0
