Linux Wireless

• Thread Index

• [PATCH 1/2] mwifiex: Fix possible buffer overflows at parsing bss descriptor
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH 0/2] Buffer overflow / read checks in mwifiex
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH 2/2] mwifiex: Abort at too short BSS descriptor element
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH 04/10] cfg80211: util: fix bit count off by one
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 01/10] cfg80211: report measurement start TSF correctly
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 03/10] mac80211: do not start any work during reconfigure flow
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 08/10] mac80211: use STA info in rate_control_send_low()
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 06/10] ieee80211: Add a missing extended capability flag definition
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 10/10] mac80211: extend __rate_control_send_low warning
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 09/10] mac80211: fill low rate even for HAS_RATE_CONTROL
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 07/10] mac80211: call rate_control_send_low() internally
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 05/10] cfg80211: Add a function to iterate all BSS entries
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 02/10] cfg80211: use BIT_ULL in cfg80211_parse_mbssid_data()
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 00/10] cfg80211/mac80211 patches from our internal tree 2019-05-29
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH] rtlwifi: Fix null-pointer dereferences in error handling code of rtl_pci_probe()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: FYI: vendor specific nl80211 API upstream
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] mt76: move mt76_get_rate in mt76-module
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2] ath10k: fix failure to set multiple fixed rate
  • From: Miaoqing Pan <miaoqing@xxxxxxxxxxxxxx>
• [PATCH 07/11] rtw88: correct power limit selection
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 10/11] rtw88: refine flow to get tx power index
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 04/11] rtw88: remove unused variable
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 11/11] rtw88: debug: dump tx power indexes in use
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 08/11] rtw88: update tx power limit table to RF v20
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 09/11] rtw88: remove all RTW_MAX_POWER_INDEX macro
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 06/11] rtw88: choose the lowest as world-wide power limit
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 03/11] rtw88: unify prefixes for tx power setting routine
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 05/11] rtw88: fix incorrect tx power limit at 5G
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 01/11] rtw88: resolve order of tx power setting routines
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 00/11] rtw88: power index setting routine updates and fixes
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 02/11] rtw88: do not use (void *) as argument
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH] rtlwifi: rtl8192cu: fix error handle when usb probe failed
  • From: <pkshih@xxxxxxxxxxx>
• [RFC PATCH v3] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• [PATCH] NFC: microread/pn544: Fix possible null pointer deference error
  • From: Young Xiao <92siuyang@xxxxxxxxx>
• [PATCH] mac80211: free peer keys before vif down in mesh
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Announcing Netdev 0x14
  • From: Jamal Hadi Salim <jhs@xxxxxxxxxxxx>
• Re: brcmfmac & DEL_INTERFACE
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• Re: brcmfmac & DEL_INTERFACE
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: FYI: vendor specific nl80211 API upstream
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• brcmfmac & DEL_INTERFACE
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• [PATCH] linux-firmware: rsi: add firmware image for redpine 9116 chipset
  • From: Siva Rebbagondla <siva8118@xxxxxxxxx>
• [PATCH] linux-firmware: rsi: update firmware images for Redpine 9113 chipset
  • From: Siva Rebbagondla <siva8118@xxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: INFO: trying to register non-static key in rtl_c2hcmd_launcher
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] network: wireless: p54u: Fix race between disconnect and firmware loading
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] network: wireless: p54u: Fix race between disconnect and firmware loading
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] rtlwifi: Fix null-pointer dereferences in error handling code of rtl_pci_probe()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtlwifi: Fix null-pointer dereferences in error handling code of rtl_pci_probe()
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH] ath10k: remove mmc_hw_reset while hif power down
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] b43: Avoid possible double calls to b43_one_core_detach()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] libertas: fix spelling mistake "Donwloading" -> "Downloading"
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore: spi: Fix a memory leaking bug in wl1271_probe()
  • From: Gen Zhang <blackgod016574@xxxxxxxxx>
• Re: [PATCH] rtlwifi: btcoex: remove unused function exhalbtc_stack_operation_notify
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtlwifi: btcoex: Remove set but not used variable 'len' and 'asso_type_v2'
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtlwifi: rtl8821ae: Remove set but not used variables 'cur_txokcnt' and 'b_last_is_cur_rdl_state'
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] rtlwifi: rtl8821ae: Remove unused GET_XXX and SET_XXX descriptor macros
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] rtlwifi: 8192de: Reduce indentation and fix coding style
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [wireless-regdb] [PATCH v3] wireless-regdb: Update regulatory rules for South Korea
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [PATCH] wlcore: spi: Fix a memory leaking bug in wl1271_probe()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] rt2x00: allow to specify watchdog interval
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] p54: Support boottime in scan results
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] p54: fix crash during initialization
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] brcmfmac: use strlcpy() instead of strcpy()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] brcmfmac: fix typos in code comments
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] nl80211: fill all policy .type entries
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore: spi: Fix a memory leaking bug in wl1271_probe()
  • From: Gen Zhang <blackgod016574@xxxxxxxxx>
• Re: [PATCH] network: wireless: p54u: Fix race between disconnect and firmware loading
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [RFC] rtlwifi: rtl8821ae: Use inline routines rather than macros for descriptor word 0
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtlwifi: Fix null-pointer dereferences in error handling code of rtl_pci_probe()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• FYI: vendor specific nl80211 API upstream
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] rtw88: pci: use ieee80211_ac_numbers instead of 0-3
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH V2 4/6] mac80211: HE: add Spatial Reuse IE parsing support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V2 5/6] mac80211: allow setting spatial reuse parameters from bss_conf
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V2 3/6] ath11k: add TWT support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V2 6/6] ath11k: add spatial reuse support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V2 1/6] mac80211: dynamically enable the TWT requester support on STA interfaces
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V2 2/6] mac80211: allow turning TWT responder support on and off via netlink
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V2 0/6] mac80211: HE: add TWT and SPR/OBSSPD support
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH] rtw88: Make some symbols static
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtw88: avoid circular locking between local->iflist_mtx and rtwdev->mutex
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore: spi: Fix a memory leaking bug in wl1271_probe()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5.2] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 5.2 v3] rtw88: fix unassigned rssi_level in rtw_sta_info
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 5.1] rtw88: fix subscript above array bounds compiler warning
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH v2] nl80211: require and validate vendor command policy
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] nl80211: require and validate vendor command policy
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume【请注意，邮件由linux-rockchip-bounces+shawn.lin=rock-chips.com@xxxxxxxxxxxxxxxxxxx代发】
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH 3/3][V2] lib: re-introduce new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/3][V2] treewide: rename match_string() -> __match_string()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/3][V2] lib: fix match_string() helper on -1 array size
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: brcmfmac support for BCM4359 sdio on arm64
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• brcmfmac support for BCM4359 sdio on arm64
  • From: Christian Hewitt <christianshewitt@xxxxxxxxx>
• Re: [PATCH V2] iw: print HE capabilities
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH V2] iw: print HE capabilities
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• [PATCH V2] iw: print HE capabilities
  • From: John Crispin <john@xxxxxxxxxxx>
• RE: [PATCH v2] ath10k: add support for simulate crash on SDIO chip
  • From: Wen Gong <wgong@xxxxxxxxxxxxxxxx>
• RE: [PATCH] ath10k: Remove ATH10K_STATE_RESTARTED in simulate fw crash
  • From: Wen Gong <wgong@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] ath10k: add support for firmware crash recovery on SDIO chip
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• [PATCH] ath10k: add report MIC error for sdio chip
  • From: Wen Gong <wgong@xxxxxxxxxxxxxx>
• RE: [PATCH] ath10k: add support for simulate crash on SDIO chip
  • From: Wen Gong <wgong@xxxxxxxxxxxxxxxx>
• [PATCH] ath10k: fix failure to set multiple fixed rate
  • From: Miaoqing Pan <miaoqing@xxxxxxxxxxxxxx>
• [PATCH] mac80211: Do not use stack memory with scatterlist for GMAC
  • From: Jouni Malinen <j@xxxxx>
• linux-next: Fixes tag needs some work in the wireless-drivers-next tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [RFC 0/8] nl80211: add 6GHz band support
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] rtl8xxxu: Add watchdog to update rate mask by signal strength
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• [RFC PATCH 2/2] mac80211: implement HE support for mesh
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• [RFC PATCH 1/2] mac80211_hwsim: Register support for HE meshpoint
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• cellular modem APIs - take 2
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [RFC PATCH 2/2] rtl8xxxu: Add watchdog to update rate mask by signal strength
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• Re: [PATCH] netlink: fix station_info pertid memory leak
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 4/4] mt76: mt7615: rearrange locking in mt7615_config
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 3/4] mt76: mt7615: init get_txpower mac80211 callback
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 2/4] mt76: mt7615: add the capability to configure tx power
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/4] mt76: generalize mt76_get_txpower for 4x4:4 devices
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/4] add tx power configuration support to mt7615 driver
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH] iwlwifi: fix warning iwl-trans.h is included more than once
  • From: Hariprasad Kelam <hariprasad.kelam@xxxxxxxxx>
• [PATCH] rtlwifi: btcoex: remove unused function exhalbtc_stack_operation_notify
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] rtlwifi: btcoex: Remove set but not used variable 'len' and 'asso_type_v2'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] rtlwifi: rtl8821ae: Remove set but not used variables 'cur_txokcnt' and 'b_last_is_cur_rdl_state'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] netlink: fix station_info pertid memory leak
  • From: Andy Strohman <andrew@xxxxxxxxxxxxxxxxxx>
• [PATCH v2] mac80211: mesh: fix RCU warning
  • From: Thomas Pedersen <thomas@xxxxxxxx>
• Re: [PATCH] mac80211: mesh: fix RCU warning
  • From: Thomas Pedersen <thomas@xxxxxxxx>
• [PATCH] p54: Support boottime in scan results
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: [PATCH] network: wireless: p54u: Fix race between disconnect and firmware loading
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: [RFC 0/8] nl80211: add 6GHz band support
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [RFC 0/8] nl80211: add 6GHz band support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] wlcore: sdio: Fix a memory leaking bug in wl1271_probe()
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] mac80211: mesh: fix RCU warning
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2] ath10k: fix fw crash by moving chip reset after napi disabled
  • From: Miaoqing Pan <miaoqing@xxxxxxxxxxxxxx>
• [PATCH] wlcore: spi: Fix a memory leaking bug in wl1271_probe()
  • From: Gen Zhang <blackgod016574@xxxxxxxxx>
• [PATCH v2] wlcore: sdio: Fix a memory leaking bug in wl1271_probe()
  • From: Gen Zhang <blackgod016574@xxxxxxxxx>
• Re: [PATCH] ath10k: add missing error handling
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] qtnfmac: add support for Topaz chipsets
  • From: Igor Mitsyanko <igor.mitsyanko.os@xxxxxxxxxxxxx>
• Re: [PATCH 00/16] wilc1000: move out of staging
  • From: <Ajay.Kathat@xxxxxxxxxxxxx>
• Re: [PATCH] ath10k: add missing error handling
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH v2 5.2] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH] iw: print HE capabilities
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• Re: [PATCH v2] sdio: Fix a memory leaking bug in wl1271_probe()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 00/16] wilc1000: move out of staging
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 00/16] wilc1000: move out of staging
  • From: <Ajay.Kathat@xxxxxxxxxxxxx>
• Re: [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH] iw: add HE support to station dump call
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 3/7] brcmsmac: switch source files to using SPDX license identifier
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wireless: fix intel typos in code comments
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] net: fix typos in code comments
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v3] ath10k: add support for firmware crash recovery on SDIO chip
  • From: Claire Chang <tientzu@xxxxxxxxxx>
• Re: [PATCH] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH V2] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: ath10k QCA9377 firmware crashes and fails to recover
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] ath10k: add missing error handling
  • From: Claire Chang <tientzu@xxxxxxxxxxxx>
• ath10k QCA9377 firmware crashes and fails to recover
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [PATCH] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• [PATCH AUTOSEL 5.1 047/375] mt76: remove mt76_queue dependency from tx_queue_skb function pointer
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 041/375] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 060/375] iwlwifi: pcie: don't crash on invalid RX interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 076/375] mac80211/cfg80211: update bss channel on channel switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 052/317] iwlwifi: pcie: don't crash on invalid RX interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 066/317] mac80211/cfg80211: update bss channel on channel switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 074/317] mwifiex: prevent an array overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 075/317] rsi: Fix NULL pointer dereference in kmalloc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 076/317] net: cw1200: fix a NULL pointer dereference
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 077/317] at76c50x-usb: Don't register led_trigger if usb_register_driver failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 081/317] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 027/244] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 043/244] iwlwifi: pcie: don't crash on invalid RX interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 052/244] mac80211/cfg80211: update bss channel on channel switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 058/244] mwifiex: prevent an array overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 059/244] rsi: Fix NULL pointer dereference in kmalloc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 061/244] at76c50x-usb: Don't register led_trigger if usb_register_driver failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 064/244] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 018/167] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 029/167] iwlwifi: pcie: don't crash on invalid RX interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 034/167] mac80211/cfg80211: update bss channel on channel switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 039/167] net: cw1200: fix a NULL pointer dereference
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 038/167] mwifiex: prevent an array overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 041/167] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 040/167] at76c50x-usb: Don't register led_trigger if usb_register_driver failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 011/114] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 016/114] iwlwifi: pcie: don't crash on invalid RX interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 023/114] mwifiex: prevent an array overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 024/114] net: cw1200: fix a NULL pointer dereference
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 020/114] mac80211/cfg80211: update bss channel on channel switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 025/114] at76c50x-usb: Don't register led_trigger if usb_register_driver failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 026/114] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 15/92] net: cw1200: fix a NULL pointer dereference
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 17/92] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 14/92] mwifiex: prevent an array overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 11/92] mac80211/cfg80211: update bss channel on channel switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 16/92] at76c50x-usb: Don't register led_trigger if usb_register_driver failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 07/92] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 060/244] net: cw1200: fix a NULL pointer dereference
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 035/317] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v3] ath10k: add support for firmware crash recovery on SDIO chip
  • From: Wen Gong <wgong@xxxxxxxxxxxxxx>
• RE: [PATCH v2] ath10k: add support for simulate crash on SDIO chip
  • From: Wen Gong <wgong@xxxxxxxxxxxxxxxx>
• [PATCH] ath10k: fix fw crash by moving chip reset after napi disabled
  • From: Miaoqing Pan <miaoqing@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] ath10k: update HOST capability qmi message
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] staging: wilc1000: remove redundant masking of pkt_offset
  • From: <Adham.Abozaeid@xxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] rtl8xxxu: Add watchdog to update rate mask by signal strength
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Add support for new channels on 60GHz band
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH 2/2] mac80211: add support for the ADDBA extension element
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 1/2] mac80211: add ieee80211_get_he_iftype_cap() helper
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH] staging: wilc1000: remove redundant masking of pkt_offset
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] brcmfmac: use strlcpy() instead of strcpy()
  • From: neojou@xxxxxxxxx
• Re: [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 0/3] brcmfmac: sdio: Deal better w/ transmission errors waking from sleep
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2] brcmfmac: fix typos in code comments
  • From: Rafał Miłecki <rafal@xxxxxxxxxx>
• [PATCH 4/4] rtlwifi: rtl8821ae: Convert inline routines to little-endian words
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 3/4] rtlwifi: rtl8821ae: Convert macros that set descriptor
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 2/4] rtlwifi: rtl8821ae: Replace local bit manipulation macros
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 1/4] rtlwifi: rtl8821ae: Remove unused GET_XXX and SET_XXX descriptor macros
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 0/4] rtlwifi: rtl8821ae: Convert bit manipulation macros to static inline routines
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] wil6210: Add EDMG channel support
  • From: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] nl80211: Add support for EDMG channels
  • From: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] Add support for new channels on 60GHz band
  • From: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] nl80211: Add support for EDMG channels
  • From: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
• [PATCH] network: wireless: p54u: Fix race between disconnect and firmware loading
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mac80211: remove warning message
  • From: Yibo Zhao <yiboz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] nl80211: Add support for EDMG channels
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH v2] brcmfmac: fix typos in code comments
  • From: Weitao Hou <houweitaoo@xxxxxxxxx>
• Re: [PATCH] wireless: fix typos in code comments
  • From: Rafał Miłecki <rafal@xxxxxxxxxx>
• [RFC 3/8] cfg80211: util: add 6GHz channel to freq conversion and vice versa
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 6/8] cfg80211: use same IR permissive rules for 6GHz band
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 1/8] nl80211: add 6GHz band definition to enum nl80211_band
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 7/8] cfg80211: ibss: use 11a mandatory rates for 6GHz band operation
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 5/8] cfg80211: add 6GHz in code handling array with NUM_NL80211_BANDS entries
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 4/8] cfg80211: extend ieee80211_operating_class_to_band() for 6GHz
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 8/8] cfg80211: apply same mandatory rate flags for 5GHz and 6GHz
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 2/8] cfg80211: add 6GHz UNII band definitions
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 0/8] nl80211: add 6GHz band support
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 6/7] mac80211: propagate spatial reuse info into ieee80211_sta
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 7/7] ath11k: add spatial reuse support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 1/7] mac80211: HE: dynamically enable the TWT requester support on STA interfaces
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 3/7] ath11k: add TWT support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 5/7] mac80211: HE: allow setting spatial reuse parameters when bringing up an AP
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 4/7] mac80211: HE: add Spatial Reuse IE parsing support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 2/7] mac80211: HE: allow turning TWT responder support on and off via netlink
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 0/7] mac80211: HE: add TWT and SPR/OBSSPD support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH] iw: print HE capabilities
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 6/8] ath11k: add defines for max MCS rates per phymode
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 8/8] ath11k: add HE support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 5/8] ath11k: extend reading of FW capabilities
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 2/8] ath11k: fix some whitespace errors
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 7/8] ath11k: handle rx status for HE frames
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 4/8] ath11k: add HE handling to the debug code
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 3/8] ath11k: move phymode selection from function to array lookup
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 1/8] mac80211: propagate HE operation info into ieee80211_sta
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 0/8] ath11k: add HE support
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 0/3] brcmfmac: sdio: Deal better w/ transmission errors waking from sleep
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 3/3] iwlwifi: add support for quz firmwares
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [mac80211] 3df7894e9b: WARNING:at_net/mac80211/rate.c:#__rate_control_send_low[mac80211]
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] net: fix typos in code comments
  • From: Weitao Hou <houweitaoo@xxxxxxxxx>
• [PATCH] wireless: fix intel typos in code comments
  • From: Weitao Hou <houweitaoo@xxxxxxxxx>
• [PATCH] wireless: fix typos in code comments
  • From: Weitao Hou <houweitaoo@xxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• [PATCH] net: wireless: p54: fix crash during initialization
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: syzbot <syzbot+200d4bb11b23d929335f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] qtnfmac: add support for Topaz chipsets
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: syzbot <syzbot+200d4bb11b23d929335f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: syzbot <syzbot+200d4bb11b23d929335f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: syzbot <syzbot+200d4bb11b23d929335f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 0/3] brcmfmac: sdio: Deal better w/ transmission errors waking from sleep
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 0/3] brcmfmac: sdio: Deal better w/ transmission errors waking from sleep
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 3/3] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] mt76: mt7615: select wifi band according to eeprom
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH] mt76: mt7615: select wifi band according to eeprom
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: syzbot <syzbot+200d4bb11b23d929335f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/7] iw: fix endless loop inside handle_mgmt_dump
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 0/7] iw: various bug fixes
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 3/7] iw: fix memory leak inside handle_cac
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 5/7] iw: fix memory leak inside parse_sched_scan
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 7/7] iw: fix fp handling inside handle_vendor
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 6/7] iw: fix memory leaks inside handle_scan
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 4/7] iw: fix fd leak inside handle_netns
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 1/7] iw: fix memory leak inside register_mgmt_frame
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: [PATCH 3/7] brcmsmac: switch source files to using SPDX license identifier
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 3/7] brcmsmac: switch source files to using SPDX license identifier
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 2/2] ath10k: correct wmi_tlv command params to enable pktlog for WCN3990
  • From: Abhishek Ambure <aambure@xxxxxxxxxxxxxx>
• [PATCH 1/2] ath10k: move pktlog connect service before htc start
  • From: Abhishek Ambure <aambure@xxxxxxxxxxxxxx>
• [PATCH 0/2] correction in pktlog service connect and pktlog enable command
  • From: Abhishek Ambure <aambure@xxxxxxxxxxxxxx>
• [PATCH v2] mt76: mt7615: add support for mtd eeprom parsing
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 3/7] brcmsmac: switch source files to using SPDX license identifier
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 3/7] brcmsmac: switch source files to using SPDX license identifier
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: SPDX identifier
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 3/7] brcmsmac: switch source files to using SPDX license identifier
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: SPDX identifier
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 3/7] brcmsmac: switch source files to using SPDX license identifier
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mt76: mt7615: add preliminary support for mtd eeprom parsing
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: SPDX identifier
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: SPDX identifier
  • From: James Hughes <james.hughes@xxxxxxxxxxxxxxx>
• [PATCH 3/7] brcmsmac: switch source files to using SPDX license identifier
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 5/7] brcmfmac: switch source files to using SPDX license identifier
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 2/7] brcmutil: switch source files to using SPDX license identifier
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 4/7] brcmsmac: switch phy source files to using SPDX license identifier
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 6/7] brcmfmac: use separate Kconfig file for brcmfmac
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 7/7] brcm80211: select WANT_DEV_COREDUMP conditionally for brcmfmac
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 0/7] brcm80211: SPDX tags and Kconfig cleanup
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH AUTOSEL 5.0 18/34] mac80211: Fix kernel panic due to use of txq after free
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 25/34] iwlwifi: mvm: check for length correctness in iwl_mvm_create_skb()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 14/25] mac80211: Fix kernel panic due to use of txq after free
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 20/25] iwlwifi: mvm: check for length correctness in iwl_mvm_create_skb()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 09/16] mac80211: Fix kernel panic due to use of txq after free
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 12/16] iwlwifi: mvm: check for length correctness in iwl_mvm_create_skb()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 5/9] mac80211: Fix kernel panic due to use of txq after free
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 3.18 4/6] mac80211: Fix kernel panic due to use of txq after free
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• SPDX identifier
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 2/2] mac80211: use STA info in rate_control_send_low()
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] mac80211: call rate_control_send_low() internally
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [RFC PATCH v2] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• Re: [PATCH] mac80211: mesh: fix RCU warning
  • From: Thomas Pedersen <thomas@xxxxxxxx>
• [PATCH] mac80211: mesh: fix RCU warning
  • From: Thomas Pedersen <thomas@xxxxxxxx>
• [PATCH v3] wireless-regdb: Update regulatory rules for South Korea
  • From: Peter Oh <peter.oh@xxxxxxxxxxxxxxxxx>
• Re: [wireless-regdb] [PATCH v2] wireless-regdb: Update regulatory rules for South Korea
  • From: Peter Oh <peter.oh@xxxxxxxxxxxxxxxxx>
• Re: [wireless-regdb] [PATCH v2] wireless-regdb: Update regulatory rules for South Korea
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH] wireless-regdb: Update regulatory rules for Japan (JP) on 5GHz
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [PATCH] wireless-regdb: update source of information for ES
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• [PATCH] wireless-regdb: Expand 60 GHz band for Japan to 57-66 GHz
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [wireless-regdb] wireless-regdb: Please update regulatory rules for Japan (JP) on 60GHz
  • From: "seth.forshee" <seth.forshee@xxxxxxxxxxxxx>
• Re: [wireless-regdb] [PATCH v2] wireless-regdb: Update regulatory rules for South Korea
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [PATCH] libertas/libertas_tf: fix spelling mistake "Donwloading" -> "Downloading"
  • From: Mukesh Ojha <mojha@xxxxxxxxxxxxxx>
• [PATCH] wireless-regdb: Update regulatory rules for Japan (JP) on 5GHz
  • From: Vladimir Koutny <vladimir.koutny@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] NFC: nxp-nci: Clarify on supported chips
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxxxx>
• [PATCH 2/2] NFC: nxp-nci: Fix recommendation for NFC_NXP_NCI_I2C Kconfig
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxxxx>
• Re: [PATCH 1/2] NFC: nxp-nci: Clarify on supported chips
  • From: Oleg Zhurakivskyy <oleg.zhurakivskyy@xxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• [PATCH] ath10k: change firmware file name for UTF mode of SDIO/USB
  • From: Wen Gong <wgong@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ath10k: add support for simulate crash on SDIO chip
  • From: Claire Chang <tientzu@xxxxxxxxxx>
• Re: [BUG] rtlwifi: a crash in error handling code of rtl_pci_probe()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• Re: [BUG] rtlwifi: a crash in error handling code of rtl_pci_probe()
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH] NFC: Orphan the subsystem
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH] libertas/libertas_tf: fix spelling mistake "Donwloading" -> "Downloading"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH][next] iwlwifi: d3: Use struct_size() helper
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mac80211: remove warning message
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mac80211: remove warning message
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] mac80211: remove warning message
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mac80211: remove warning message
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• [PATCH] mt76: mt7615: add preliminary support for mtd eeprom parsing
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v2] mac80211: remove warning message
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] NFC: Orphan the subsystem
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Oleg Zhurakivskyy <oleg.zhurakivskyy@xxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Oleg Zhurakivskyy <oleg.zhurakivskyy@xxxxxxxxx>
• [BUG] rtlwifi: a crash in error handling code of rtl_pci_probe()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• [BUG] rtlwifi: Resource leaks in error handling code of rtl_pci_probe()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• [PATCH] mt76: move mt76_insert_ccmp_hdr in mt76-module
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] rtlwifi: Fix null-pointer dereferences in error handling code of rtl_pci_probe()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• [PATCH] mt76: mt7615: stop mcu first in mt7615_unregister_device
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Oleg Zhurakivskyy <oleg.zhurakivskyy@xxxxxxxxx>
• Re: pull request: iwlwifi firmware updates 2019-05-03
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• Re: [PATCH] NFC: Orphan the subsystem
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] NFC: Orphan the subsystem
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• [PATCH] mt76: mt7615: do not process rx packets if the device is not initialized
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2] mac80211: remove warning message
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mac80211: remove warning message
  • From: Yibo Zhao <yiboz@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mac80211: remove warning message
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] NFC: Orphan the subsystem
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2] mac80211: remove warning message
  • From: Yibo Zhao <yiboz@xxxxxxxxxxxxxx>
• Re: [PATCH] mac80211: remove warning message
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] {nl,mac}80211: allow 4addr AP operation on crypto controlled devices
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH] mac80211: fix possible deadlock in TX path
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: ath10k 5Ghz RSSI low
  • From: Sam Samy <to.swami1@xxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH] iwlwifi: trans: fix killer series loadded incorrect firmware
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH] iwlwifi: remove some unnecessary NULL checks
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH] net: wireless: iwlwifi: Fix double-free problems in iwl_req_fw_callback()
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH][next] iwlwifi: d3: Use struct_size() helper
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH][next] iwlwifi: lib: Use struct_size() helper
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: ath10k 5Ghz RSSI low
  • From: Sam Samy <to.swami1@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: ath10k 5Ghz RSSI low
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: ath10k 5Ghz RSSI low
  • From: Sam Samy <to.swami1@xxxxxxxxx>
• Re: ath10k 5Ghz RSSI low
  • From: Sam Samy <to.swami1@xxxxxxxxx>
• Re: ath10k 5Ghz RSSI low
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: ath10k 5Ghz RSSI low
  • From: Sam Samy <to.swami1@xxxxxxxxx>
• Re: ath10k 5Ghz RSSI low
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• ath10k 5Ghz RSSI low
  • From: Sam Samy <to.swami1@xxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] ath10k: enabling tx stats support over pktlog
  • From: Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] wil6210: Add EDMG channel support
  • From: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] nl80211: Add support for EDMG channels
  • From: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] Add support for new channels on 60GHz band
  • From: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] nl80211: Add support for EDMG channels
  • From: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH] iwlwifi: trans: fix killer series loadded incorrect firmware
  • From: Cyrus Lien <cyruslien@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Oleg Zhurakivskyy <oleg.zhurakivskyy@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Oleg Zhurakivskyy <oleg.zhurakivskyy@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• [PATCH v2 02/12] NFC: nxp-nci: Get rid of platform data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 08/12] NFC: nxp-nci: Drop of_match_ptr() use
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 12/12] NFC: nxp-nci: Convert to SPDX license tags
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 07/12] NFC: nxp-nci: Constify acpi_device_id
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 05/12] NFC: nxp-nci: Get rid of code duplication in ->probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 10/12] NFC: nxp-nci: Remove unused macro pr_fmt()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 06/12] NFC: nxp-nci: Get rid of useless label
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 11/12] NFC: nxp-nci: Remove 'default n' for tests
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 01/12] NFC: nxp-nci: Add NXP1001 to the ACPI ID table
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 09/12] NFC: nxp-nci: Drop comma in terminator lines
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 03/12] NFC: nxp-nci: Convert to use GPIO descriptor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 04/12] NFC: nxp-nci: Add GPIO ACPI mapping table
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 00/12] NFC: nxp-nci: clean up and support new ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] mt76: mt76x02: fix edcca file permission
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: syzbot <syzbot+200d4bb11b23d929335f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Oleg Zhurakivskyy <oleg.zhurakivskyy@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH 3/4] mt76: mt76x2: move mutex_lock inside mt76x2_set_channel
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH 3/4] mt76: mt76x2: move mutex_lock inside mt76x2_set_channel
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH RFC] brcmfmac: sanitize DMI strings v2
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 3/4] mt76: mt76x2: move mutex_lock inside mt76x2_set_channel
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 3/4] mt76: mt76x2: move mutex_lock inside mt76x2_set_channel
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• RE: [PATCH v2 3/7] lib/hexdump.c: Optionally suppress lines of repeated bytes
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• Re: [PATCH v2 3/7] lib/hexdump.c: Optionally suppress lines of repeated bytes
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 03/16] lib,treewide: add new match_string() helper/macro
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] mac80211: remove warning message
  • From: Yibo Zhao <yiboz@xxxxxxxxxxxxxx>
• Re: [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 4/4] mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 4/4] mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH 4/4] mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] mt76: mt7615: add static qualifier to mt7615_rx_poll_complete
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: mt7615: rearrange cleanup operations in mt7615_unregister_device
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: mt7603: stop mac80211 queues before setting the channel
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: mt7615: Make mt7615_irq_handler static
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH 4/4] mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH 00/17] use standard signature for mt7615 mcu api
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH][next] mt76: fix less than zero check on a u8 variable
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: Fix a signedness bug in mt7615_add_interface()
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Oleg Zhurakivskyy <oleg.zhurakivskyy@xxxxxxxxx>
• Re: [PATCH 0/4] mt76: add tx napi polling support to mt7603/mt7615
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: mt76x02: remove useless return in mt76x02_resync_beacon_timer
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 4/4] mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 3/4] mt76: mt76x2: move mutex_lock inside mt76x2_set_channel
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 2/4] mt76: mt76x2u: remove mt76x02_edcca_init in mt76x2u_set_channel
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/4] mt76: mt76x02: remove enable from mt76x02_edcca_init signature
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/4] run mt76x02_edcca_init atomically
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [linux-nfc] ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Oleg Zhurakivskyy <oleg.zhurakivskyy@xxxxxxxxx>
• Re: ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• mainline kernel brcmfmac regression
  • From: Andy Lavr <andy.lavr@xxxxxxxxx>
• Re: [PATCH 03/16] lib,treewide: add new match_string() helper/macro
  • From: "andriy.shevchenko@xxxxxxxxxxxxxxx" <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] mac80211: remove warning message
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [PATCH] NFC: fix attrs checks in netlink interface
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH net 2/5] dt-bindings: doc: net: remove Linux API references
  • From: Petr Štetiar <ynezz@xxxxxxx>
• [PATCH net 5/5] net: wireless: mt76: fix similar warning reported by kbuild test robot
  • From: Petr Štetiar <ynezz@xxxxxxx>
• Re: [PATCH 03/16] lib,treewide: add new match_string() helper/macro
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] mac80211: handle deauthentication/disassociation from TDLS peer
  • From: Yu Wang <yyuwang@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] rtl8xxxu: Add watchdog to update rate mask by signal strength
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• Re: [PATCH 5/6] cfg80211: add support for SAE authentication offload
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH 4/4] rtlwifi: 8192de: use le32 to access cckswing tables
  • From: <pkshih@xxxxxxxxxxx>
• [PATCH 1/4] rtlwifi: 8192de: Reduce indentation and fix coding style
  • From: <pkshih@xxxxxxxxxxx>
• [PATCH 0/4] rtlwifi: 8192de: Fix used uninitialized variables in power tracking
  • From: <pkshih@xxxxxxxxxxx>
• [PATCH 2/4] rtlwifi: 8192de: make tables to be 'static const'
  • From: <pkshih@xxxxxxxxxxx>
• [PATCH 3/4] rtlwifi: 8192de: Fix used uninitialized variables in power tracking
  • From: <pkshih@xxxxxxxxxxx>
• Re: ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• [PATCH] mac80211: remove warning message
  • From: Yibo Zhao <yiboz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] lib/hexdump.c: Optionally suppress lines of repeated bytes
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• ThinkPad T470 and NXP PN5xx (PN547 or PN548)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH] ath10k: Change the warning message string
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCHv2] ath10k: Add wrapper function to ath10k debug
  • From: Venkateswara Naralasetty <vnaralas@xxxxxxxxxxxxxxxx>
• [PATCH] ath10k: Change the warning message string
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 2/6] brcmfmac: send port authorized event for 802.1X 4-way handshake offload
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] rtl8xxxu: Add watchdog to update rate mask by signal strength
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• [PATCH V2 3/3] brcmfmac: add support for SAE authentication offload
  • From: Chi-Hsien Lin <Chi-Hsien.Lin@xxxxxxxxxxx>
• [PATCH V2 2/3] nl80211: add support for SAE authentication offload
  • From: Chi-Hsien Lin <Chi-Hsien.Lin@xxxxxxxxxxx>
• [PATCH V2 1/3] nl80211: add WPA3 definition for SAE authentication
  • From: Chi-Hsien Lin <Chi-Hsien.Lin@xxxxxxxxxxx>
• [PATCH V2 0/3] nl80211: brcmfmac: add SAE authentication offload
  • From: Chi-Hsien Lin <Chi-Hsien.Lin@xxxxxxxxxxx>
• [PATCH V2 2/2] brcmfmac: send port authorized event for FT-802.1X
  • From: Chi-Hsien Lin <Chi-Hsien.Lin@xxxxxxxxxxx>
• [PATCH V2 0/2] nl80211: brcmfmac: add port authorized event support
  • From: Chi-Hsien Lin <Chi-Hsien.Lin@xxxxxxxxxxx>
• [PATCH V2 1/2] nl80211: add NL80211_ATTR_IFINDEX to port authorized event
  • From: Chi-Hsien Lin <Chi-Hsien.Lin@xxxxxxxxxxx>
• Re: [RFC PATCH 1/2] rtl8xxxu: Add rate adaptive related data
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 5/6] cfg80211: add support for SAE authentication offload
  • From: Stanley Hsu <Stanley.Hsu@xxxxxxxxxxx>
• Re: [RFC PATCH 2/2] rtl8xxxu: Add watchdog to update rate mask by signal strength
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• Re: [PATCH 5/6] cfg80211: add support for SAE authentication offload
  • From: Stanley Hsu <Stanley.Hsu@xxxxxxxxxxx>
• Re: [PATCH 2/6] brcmfmac: send port authorized event for 802.1X 4-way handshake offload
  • From: Stanley Hsu <Stanley.Hsu@xxxxxxxxxxx>
• Re: [PATCH 1/6] nl80211: add NL80211_ATTR_IFINDEX to port authorized event
  • From: Stanley Hsu <Stanley.Hsu@xxxxxxxxxxx>
• Re: [RFC PATCH 1/2] rtl8xxxu: Add rate adaptive related data
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] rtl8xxxu: Add watchdog to update rate mask by signal strength
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• [PATCH v2 12/17] mt7615: mcu: do not use function pointers whenever possible
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 3/7] lib/hexdump.c: Optionally suppress lines of repeated bytes
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 03/16] lib,treewide: add new match_string() helper/macro
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 03/16] lib,treewide: add new match_string() helper/macro
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/16] lib,treewide: add new match_string() helper/macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 09/16] mmc: sdhci-xenon: use new match_string() helper/macro
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• RE: [PATCH v2 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• Re: [PATCH v4 02/10] dt-bindings: doc: reflect new NVMEM of_get_mac_address behaviour
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 01/16] lib: fix match_string() helper when array size is positive
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 06/16] x86/mtrr: use new match_string() helper + add gaps == minor fix
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 05/16] ALSA: oxygen: use new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 03/16] lib,treewide: add new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 07/16] device connection: use new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 10/16] pinctrl: armada-37xx: use new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 08/16] cpufreq/intel_pstate: remove NULL entry + use match_string()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 11/16] mm/vmpressure.c: use new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 13/16] drm/edid: use new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 01/16] lib: fix match_string() helper on -1 array size
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH 15/16] video: fbdev: pxafb: use new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 14/16] staging: gdm724x: use new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 16/16] sched: debug: use new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 12/16] rdmacg: use new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 09/16] mmc: sdhci-xenon: use new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 04/16] powerpc/xmon: use new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 02/16] treewide: rename match_string() -> __match_string()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 01/16] lib: fix match_string() helper on -1 array size
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 00/16] treewide: fix match_string() helper when array size
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v2] {nl,mac}80211: allow 4addr AP operation on crypto controlled devices
  • From: Manikanta Pubbisetty <mpubbise@xxxxxxxxxxxxxx>
• [PATCH v3] {nl,mac}80211: allow 4addr AP operation on crypto controlled devices
  • From: Manikanta Pubbisetty <mpubbise@xxxxxxxxxxxxxx>
• RE: [PATCH v2 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH v2 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 02/10] dt-bindings: doc: reflect new NVMEM of_get_mac_address behaviour
  • From: Petr Štetiar <ynezz@xxxxxxx>
• [PATCH v2 1/7] lib/hexdump.c: Fix selftests
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v2 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v2 7/7] lib/hexdump.c: Optionally retain byte ordering
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v2 2/7] lib/hexdump.c: Relax rowsize checks in hex_dump_to_buffer
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v2 5/7] lib/hexdump.c: Allow multiple groups to be separated by lines '|'
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v2 6/7] lib/hexdump.c: Allow multiple groups to be separated by spaces
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v2 3/7] lib/hexdump.c: Optionally suppress lines of repeated bytes
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• [PATCH v2 0/7] Hexdump Enhancements
  • From: "Alastair D'Silva" <alastair@xxxxxxxxxxx>
• Re: [PATCH v8 13/15] x86/split_lock: Enable split lock detection by default
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• [PATCH net] wireless: Skip directory when generating certificates
  • From: Maxim Mikityanskiy <maxtram95@xxxxxxxxx>
• Re: [PATCH v4 02/10] dt-bindings: doc: reflect new NVMEM of_get_mac_address behaviour
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH RFC] brcmfmac: sanitize DMI strings v2
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• ath9k on ASUS X202E hangs after 4.20.13
  • From: "Anderson, Charles R" <cra@xxxxxxx>
• Re: [PATCH v2] ath10k: fix different tx duration output
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: Check tx_stats before use it
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ath10k: add peer id check in ath10k_peer_find_by_id
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ath10k: Add wmi tlv vdev subtype for mesh in WCN3990
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: change swap mail box config for UTF mode of SDIO
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: Fix the wrong value of enums for wmi tlv stats id
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH][next] ath10k: coredump: use struct_size() helper
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH][next] ath10k: Use struct_size() helper
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: Fix encoding for protected management frames
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: rx_duration update for fw_stats debugfs entry
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: Fix the tx stats bytes & packets parsing
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: Modify CE4 src buffer entries to 2048 for WCN3990
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: Move board id and fw version logging to info level
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ath10k: Extended the HTT stats support to retrieve Mu-MIMO related stats
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [RFC] rtlwifi: rtl8821ae: Use inline routines rather than macros for descriptor word 0
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH v2] ath10k: fix different tx duration output
  • From: Toke Høiland-Jørgensen <toke@xxxxxxxxxx>
• Re: [PATCH v2] ath10k: fix different tx duration output
  • From: leiwa@xxxxxxxxxxxxxx
• Re: [PATCH] ath10k: remove mmc_hw_reset while hif power down
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] mt76: mt7615: add static qualifier to mt7615_rx_poll_complete
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 13/99] cfg80211: Handle WMM rules in regulatory domain intersection
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 11/99] mac80211: fix unaligned access in mesh table hash function
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 12/99] mac80211: Increase MAX_MSG_LEN
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 14/99] mac80211: fix memory accounting with A-MSDU aggregation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 15/99] nl80211: Add NL80211_FLAG_CLEAR_SKB flag for other NL commands
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 20/99] mac80211: Honor SW_CRYPTO_CONTROL for unicast keys in AP VLAN mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 83/99] spi: ST ST95HF NFC: declare missing of table
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 11/81] mac80211: fix unaligned access in mesh table hash function
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 14/81] mac80211: fix memory accounting with A-MSDU aggregation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 12/81] mac80211: Increase MAX_MSG_LEN
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 15/81] nl80211: Add NL80211_FLAG_CLEAR_SKB flag for other NL commands
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 13/81] cfg80211: Handle WMM rules in regulatory domain intersection
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 57/81] spi: ST ST95HF NFC: declare missing of table
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 80/81] nfc: nci: Potential off by one in ->pipes[] array
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 79/81] NFC: nci: Add some bounds checking in nci_hci_cmd_received()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 09/95] mac80211: Increase MAX_MSG_LEN
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 10/95] mac80211: fix memory accounting with A-MSDU aggregation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 11/95] nl80211: Add NL80211_FLAG_CLEAR_SKB flag for other NL commands
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 08/95] mac80211: fix unaligned access in mesh table hash function
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 33/95] spi: ST ST95HF NFC: declare missing of table
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 93/95] NFC: nci: Add some bounds checking in nci_hci_cmd_received()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 94/95] nfc: nci: Potential off by one in ->pipes[] array
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 08/25] mac80211: fix unaligned access in mesh table hash function
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 24/25] spi: ST ST95HF NFC: declare missing of table
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 18/81] mac80211: Honor SW_CRYPTO_CONTROL for unicast keys in AP VLAN mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• RE: [PATCH] ath10k: remove mmc_hw_reset while hif power down
  • From: Wen Gong <wgong@xxxxxxxxxxxxxxxx>
• [PATCH 5.2 v3] rtw88: fix unassigned rssi_level in rtw_sta_info
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH RFC v3] brcmfmac: sanitize DMI strings
  • From: Victor Bravo <1905@xxxxxxxxxx>
• Re: [PATCH v8 13/15] x86/split_lock: Enable split lock detection by default
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• Re: [PATCH] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• [PATCH 2/2] iwlwifi: Extended Key ID support
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• Re: [PATCH RFC] brcmfmac: sanitize DMI strings v2
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 1/2] mac80211: AMPDU handling for Extended Key ID
  • From: Alexander Wetzel <alexander@xxxxxxxxxxxxxx>
• [RFC] rtlwifi: rtl8821ae: Use inline routines rather than macros for descriptor word 0
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] ath10k: Enable MSA region dump support for WCN3990
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH RFC] brcmfmac: sanitize DMI strings v2
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH RFC] brcmfmac: sanitize DMI strings v2
  • From: Victor Bravo <1905@xxxxxxxxxx>
• [PATCH v2 1/1] ath10k: Enable MSA region dump support for WCN3990
  • From: Govind Singh <govinds@xxxxxxxxxxxxxx>
• Re: [PATCH RFC] brcmfmac: sanitize DMI strings v2
  • From: Victor Bravo <1905@xxxxxxxxxx>
• [PATCH] iwlwifi: remove some unnecessary NULL checks
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>