Search Linux Wireless

Re: Implementing Mikrotik IE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Am 21.08.2019 um 22:04 schrieb Josef Miegl:
On August 19, 2019 10:21:55 PM GMT+02:00, Johannes Berg <johannes@xxxxxxxxxxxxxxxx> wrote:
I don't know, try capturing over the air?

Perhaps the vendor IEs added this way are added *first* before all the
RSN IEs, and that's tripping up your AP, and you'd have to add them
*after* the normal elements? Not really sure where/how they're added?

johannes
The vendor elements are added at the very end of the frame. In fact I tried moving the RSN IE to the end of the frame so that the frame is similar to the one ubnt airos produces. No luck either. One thing I've learned is that ubnt airos assoc req frames have the WMM/WME IE placed before HT Capabilities. But I'm not sure how to move it and also not sure if it would actually work.

I am getting 4WAY_HANDSHAKE_TIMEOUT. From capturing I can see the station sends Key (msg 2 of 4) and a bunch of acknowledgements, but it never sends Key (msg 4 of 4) afterwards.

I feel like I'm stuck.. What could be the reason for this behaviour?
i can just tell you that i added the mikrotik ie just before the wmm ie but after ht/vht ie

Josef




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux