Linux Wireless

• Thread Index

• Re: [PATCH v2 2/2] mt76: usb: do not always copy the first part of received frames
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v2 2/2] mt76: usb: do not always copy the first part of received frames
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH v2 1/2] mt76: usb: fix rx A-MSDU support
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v3 3/5] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] wireless: wil6210: no need to check return value of debugfs_create functions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] wireless: wil6210: no need to check return value of debugfs_create functions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] mac80211: drop robust management frames from unknown TA
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] mt76: usb: fix rx A-MSDU support
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH v2 2/2] mt76: usb: do not always copy the first part of received frames
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] wlcore/wl18xx: Add invert-irq OF property for physically inverted IRQ
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] mt76: usb: fix rx A-MSDU support
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH] mt76: mt76x02u: fix sparse warnings: should it be static?
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: rtw88: M.2 RTL8822BE not working - rfe 3 isn't supported
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH v2 2/2] mt76: usb: do not always copy the first part of received frames
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH v2 1/2] mt76: usb: fix rx A-MSDU support
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [RFC PATCH v2 3/3] ath11k: register HE mesh capabilities
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] mt76: mt7615: update peer's bssid when state transition changes
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• Re: [PATCH v2] mt76: mt7615: add support for per-chain signal strength reporting
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 2/2] mt76: mt7615: update peer's bssid when state transition changes
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [RESEND] brcmfmac support for BCM4359 sdio on arm64 ??
  • From: Christian Hewitt <christianshewitt@xxxxxxxxx>
• Re: [PATCH 07/11] rtw88: 8822c: use more accurate ofdm fa counting
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 11/11] rtw88: fix typo rtw_writ16_set
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 09/11] rtw88: restore DACK results to save time
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 10/11] rtw88: rsvd page should go though management queue
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 08/11] rtw88: power on again if it was already on
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 07/11] rtw88: 8822c: use more accurate ofdm fa counting
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 06/11] rtw88: 8822c: disable rx clock gating before counter reset
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 04/11] rtw88: 8822c: add rf write protection when switching channel
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 05/11] rtw88: 8822c: update channel and bandwidth BB setting
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 01/11] rtw88: add fast xmit support
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 03/11] rtw88: add beacon function setting
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 00/11] rtw88: regular driver upgrade with minor changes
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 02/11] rtw88: add support for random mac scan
  • From: <yhchuang@xxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] mt76: mt7615: update peer's bssid when state transition changes
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• [PATCH v2] mt76: mt7615: add support for per-chain signal strength reporting
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• [PATCH 1/2] mt76: mt7615: fix incorrect settings in mesh mode
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• ROC event when CMD_FRAME duration expires
  • From: James Prestwood <james.prestwood@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 3/3] ath11k: register HE mesh capabilities
  • From: Sven Eckelmann <seckelmann@xxxxxxxxx>
• [PATCH] wireless: wil6210: no need to check return value of debugfs_create functions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 3/3] ath11k: register HE mesh capabilities
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• [RFC PATCH v2 2/3] mac80211: implement HE support for mesh
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• [RFC PATCH v2 1/3] mac80211_hwsim: Register support for HE meshpoint
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• [RFC PATCH v2 0/3] mac80211/ath11k: HE mesh support
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Andreas Schwab <schwab@xxxxxxxxxxxxxx>
• [PATCH v2] ath10k: fix max antenna gain unit
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• Re: [PATCH] ath10k: fix max antenna gain unit
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] ath9k: correctly handle short radar pulses (fixes 3c0efb745a)
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ath9k: correctly handle short radar pulses (fixes 3c0efb745a)
  • From: Zefir Kurtisi <zefir.kurtisi@xxxxxxxxxxx>
• Re: [PATCH v2] ath9k: correctly handle short radar pulses (fixes 3c0efb745a)
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ath9k: correctly handle short radar pulses (fixes 3c0efb745a)
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 00/11] rtw88: power index setting routine updates and fixes
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH v2] ath9k: correctly handle short radar pulses (fixes 3c0efb745a)
  • From: Zefir Kurtisi <zefir.kurtisi@xxxxxxxxxxx>
• [PATCH] ath9k: corrctly handle short radar pulses (fixes 3c0efb745a)
  • From: Zefir Kurtisi <zefir.kurtisi@xxxxxxxxxxx>
• [PATCH] mmc: core: Prevent processing SDIO IRQs when the card is suspended
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH] ath10k: fix max antenna gain unit
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• RE: [PATCH 00/11] rtw88: power index setting routine updates and fixes
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• Re: [RESEND] brcmfmac support for BCM4359 sdio on arm64 ??
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Trace with softblocked wireless card during startup on v5.1.x
  • From: Julian Wollrath <jwollrath@xxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] wlcore/wl18xx: Add invert-irq OF property for physically inverted IRQ
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH] wlcore/wl18xx: Add invert-irq OF property for physically inverted IRQ
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mt76: mt7615: init per-channel target power
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 1/2] mt76: mt7615: init per-channel target power
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/5] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] mt76: mt7615: take into account extPA when configuring tx power
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] mt76: mt7615: init per-channel target power
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/2] take into account external PA when configuring tx power
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: ath10k QCA9377 firmware crashes and fails to recover
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ssb/gpio: Remove unnecessary WARN_ON from driver_gpio
  • From: H Buus <ubuntu@xxxxxxxxx>
• [PATCH] cfg80211: fix memory leak of wiphy device name
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH] ssb/gpio: Remove unnecessary WARN_ON from driver_gpio
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH] ssb/gpio: Remove unnecessary WARN_ON from driver_gpio
  • From: Michael Büsch <m@xxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH v3 3/5] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH][next] qtnfmac: Use struct_size() in kzalloc()
  • From: Sergey Matyukevich <sergey.matyukevich.os@xxxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH v2] carl9170: fix misuse of device driver API
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] carl9170: fix enum compare splat
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: [PATCH v2 2/7] net/mac80211: move WEP handling to ARC4 library interface
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [RFC PATCH v4] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• [PATCH v3] ath10k: Enable MSA region dump support for WCN3990
  • From: Govind Singh <govinds@xxxxxxxxxxxxxx>
• RE: [PATCH v3 3/5] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: "Hunter, Adrian" <adrian.hunter@xxxxxxxxx>
• Re: [PATCH] wlcore/wl18xx: Add invert-irq OF property for physically inverted IRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] mt76: mt7615: add support for per-chain signal strength reporting
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• Re: [PATCH] carl9170: fix enum compare splat
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore/wl18xx: Add invert-irq OF property for physically inverted IRQ
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: Should b44_init lead to WARN_ON in drivers/ssb/driver_gpio.c:464?
  • From: Michael Büsch <m@xxxxxxx>
• Re: iwlwifi module crash
  • From: Emmanuel Grumbach <egrumbach@xxxxxxxxx>
• How to debug/show status of intel wifi card?
  • From: Tetsuji Rai <tetsuji-rai@xxxxxxxxxxxxxxxxxx>
• Re: Should b44_init lead to WARN_ON in drivers/ssb/driver_gpio.c:464?
  • From: H Buus <ubuntu@xxxxxxxxx>
• possible fix for broken cmac crypto support
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxxxxxxx>
• Re: [PATCH] mt76: mt7615: add support for per-chain signal strength reporting
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxxxxxxx>
• Re: [PATCH] mt76: mt7615: add support for per-chain signal strength reporting
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• ath6k : Error: Connection activation failed: (7) Secrets were required, but not provided.
  • From: Ken Harris <kjh@xxxxxxxxxxx>
• Re: [PATCH] mt76: mt7615: add support for per-chain signal strength reporting
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• Re: Should b44_init lead to WARN_ON in drivers/ssb/driver_gpio.c:464?
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: Should b44_init lead to WARN_ON in drivers/ssb/driver_gpio.c:464?
  • From: Michael Büsch <m@xxxxxxx>
• Should b44_init lead to WARN_ON in drivers/ssb/driver_gpio.c:464?
  • From: H Buus <ubuntu@xxxxxxxxx>
• [PATCH v3] ath9k: add loader for AR92XX (and older) pci(e)
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: [PATCH v2 2/7] net/mac80211: move WEP handling to ARC4 library interface
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mt76: mt7615: add support for per-chain signal strength reporting
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2] ath9k: add loader for AR92XX (and older) pci(e)
  • From: Julian Calaby <julian.calaby@xxxxxxxxx>
• [PATCH v2 3/7] net/lib80211: move WEP handling to ARC4 library code
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [PATCH v2 4/7] net/lib80211: move TKIP handling to ARC4 library code
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [PATCH v2 2/7] net/mac80211: move WEP handling to ARC4 library interface
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [PATCH] mt76: mt7615: add support for per-chain signal strength reporting
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• [PATCH v3 20/33] docs: convert docs to ReST and rename to *.rst
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [RFC PATCH v2] ath9k: add loader for AR92XX (and older) pci(e)
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• [PATCH v2] carl9170: fix misuse of device driver API
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• [PATCH] carl9170: fix enum compare splat
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• [PATCH] mt76: mt7615: simplify mt7615_mcu_set_sta_rec routine
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Sandy Harris <sandyinchina@xxxxxxxxx>
• rtw88: M.2 RTL8822BE not working - rfe 3 isn't supported
  • From: "g.schlmm" <g.schlmm@xxxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.1 07/70] staging: wilc1000: Fix some double unlock bugs in wilc_wlan_cleanup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] rtlwifi: rtl8188ee: remove redundant assignment to rtstatus
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH v2 4/4] mt76: mt76x02: fix tx reordering on rate control probing without a-mpdu
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• [RESEND] brcmfmac support for BCM4359 sdio on arm64 ??
  • From: Christian Hewitt <christianshewitt@xxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• [PATCH v3 0/5] brcmfmac: sdio: Deal better w/ transmission errors related to idle
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 2/5] mmc: core: API for temporarily disabling auto-retuning due to errors
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 1/5] Revert "brcmfmac: disable command decode in sdio_aos"
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 3/5] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 5/5] brcmfmac: sdio: Don't tune while the card is off
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 4/5] mmc: core: Export mmc_retune_hold_now() mmc_retune_release()
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• Re: iwl_mvm_add_new_dqa_stream_wk BUG in lib/list_debug.c:56
  • From: Marc Haber <mh+netdev@xxxxxxxxxxxx>
• Re: iwl_mvm_add_new_dqa_stream_wk BUG in lib/list_debug.c:56
  • From: Yussuf Khalil <dev@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: pull-request: wireless-drivers 2019-06-07
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH][next] qtnfmac: Use struct_size() in kzalloc()
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH v2 3/3] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• [PATCH] wlcore/wl18xx: Add invert-irq OF property for physically inverted IRQ
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] mt7601u: do not schedule {rx,tx}_tasklet when the device has been disconnected
  • From: Jakub Kicinski <kubakici@xxxxx>
• Re: [PATCH] mt76: mt7615: remove key check in mt7615_mcu_set_wtbl_key
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: mt7615: remove unused variable in mt7615_mcu_set_bcn
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH v3 2/2] mt76: mt7615: fix slow performance when enable encryption
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: Remove set but not used variables 'pid' and 'final_mpdu'
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: move mt76_get_rate in mt76-module
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH 0/4] add tx power configuration support to mt7615 driver
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: mt7615: select wifi band according to eeprom
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH v2] mt76: mt7615: add support for mtd eeprom parsing
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: move mt76_insert_ccmp_hdr in mt76-module
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 2/4] mt76: fix setting chan->max_power
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 4/4] mt76: mt76x02: fix tx reordering on rate control probing without a-mpdu
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 3/4] mt76: mt76x02: fix tx status reporting issues
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 1/4] mt7603: fix reading target tx power from eeprom
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: mt7615: stop mcu first in mt7615_unregister_device
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: mt7615: do not process rx packets if the device is not initialized
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: mt76x02: fix edcca file permission
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH v2] mt76: mt7603: add debugfs knob to enable/disable edcca
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH v2 4/4] mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [RFC PATCH 3/3] lib80211/wep: switch to skcipher interface for arc4
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [RFC PATCH 2/3] lib80211/tkip: switch to skcipher interface for arc4
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [RFC PATCH 1/3] net/mac80211: switch to skcipher interface for arc4
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [RFC PATCH 0/3] move WEP implementation to skcipher interface
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH v2 3/3] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH v2 3/3] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH v2 2/2] mt7601u: fix possible memory leak when the device is disconnected
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 1/2] mt7601u: do not schedule rx_tasklet when the device has been disconnected
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 0/2] mt7601u: do not schedule {rx,tx}_tasklet when the device has been disconnected
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: iwlwifi module crash
  • From: Balakrishnan Balasubramanian <linux-wireless-list@xxxxxxxx>
• Re: [PATCH] linux-firmware: rsi: update firmware images for Redpine 9113 chipset
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• Re: [PATCH] linux-firmware: rsi: add firmware image for redpine 9116 chipset
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• Re: iwlwifi module crash
  • From: Emmanuel Grumbach <egrumbach@xxxxxxxxx>
• pull-request: wireless-drivers 2019-06-07
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH V2] iw: print HE capabilities
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH V2] iw: print HE capabilities
  • From: Joe Perches <joe@xxxxxxxxxxx>
• iwlwifi module crash
  • From: Balakrishnan Balasubramanian <linux-wireless-list@xxxxxxxx>
• Re: [PATCH] mt7601u: fix possible memory leak when the device is disconnected
  • From: Jakub Kicinski <kubakici@xxxxx>
• Re: Help with encrypting PMF management frames
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [PATCH] mt7601u: fix possible memory leak when the device is disconnected
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] mt7601u: do not schedule rx_tasklet when the device has been disconnected
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v2 3/3] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] mt7601u: fix possible memory leak when the device is disconnected
  • From: Jakub Kicinski <kubakici@xxxxx>
• Re: [PATCH] mt7601u: do not schedule rx_tasklet when the device has been disconnected
  • From: Jakub Kicinski <kubakici@xxxxx>
• Re: [PATCH] mt7601u: fix possible memory leak when the device is disconnected
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] mt7601u: do not schedule rx_tasklet when the device has been disconnected
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH] mt7601u: do not schedule rx_tasklet when the device has been disconnected
  • From: Jakub Kicinski <kubakici@xxxxx>
• Re: [PATCH] mt7601u: fix possible memory leak when the device is disconnected
  • From: Jakub Kicinski <kubakici@xxxxx>
• Re: [PATCH v3] {nl,mac}80211: allow 4addr AP operation on crypto controlled devices
  • From: Tom Psyborg <pozega.tomislav@xxxxxxxxx>
• Help with encrypting PMF management frames
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH] mt7601u: fix possible memory leak when the device is disconnected
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Update to wireless-regdb about Italy
  • From: Giorgio Bernardi <giorgio.bernardi@xxxxxxxxx>
• [PATCH] mt7601u: do not schedule rx_tasklet when the device has been disconnected
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: KMSAN: uninit-value in rt2500usb_bbp_read
  • From: Alexander Potapenko <glider@xxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxxxxxxx>
• KMSAN: uninit-value in rt2500usb_bbp_read
  • From: syzbot <syzbot+a106a5b084a6890d2607@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH v2 0/2] mt76: usb: fix A-MSDU support
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• [BISECTED REGRESSION] b43legacy broken on G4 PowerBook
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH v2 2/3] mmc: core: API for temporarily disabling auto-retuning due to errors
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• From Dr Tracy William
  • From: Tracy William <mrsnicolemaroisbf@xxxxxxxxx>
• RE: [EXT] [PATCH 1/2] mwifiex: dispatch/rotate from reorder table atomically
  • From: Ganapathi Bhat <gbhat@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] mmc: core: API for temporarily disabling auto-retuning due to errors
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [RFC PATCH v4] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• [PATCH] mt76: mt7615: remove key check in mt7615_mcu_set_wtbl_key
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [EXT] Re: [4.20 PATCH] Revert "mwifiex: restructure rx_reorder_tbl_lock usage"
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH 1/2] mwifiex: dispatch/rotate from reorder table atomically
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH 0/2] mwifiex: spinlock usage improvements
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH 2/2] mwifiex: don't disable hardirqs; just softirqs
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• LPC 2019 Networking Track CFP
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH V5 2/2] ath10k: add tx hw 802.11 encapusaltion offloading suppor
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 1/2] mac80211: add hw 80211 encapsulation offloading support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 0/2] mac80211: add 802.11 encapsulation offloading
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH] mwifiex: print PCI mmap with %pK
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH] mwifiex: drop 'set_consistent_dma_mask' log message
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH] mwifiex: drop 'set_consistent_dma_mask' log message
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH] mwifiex: drop 'set_consistent_dma_mask' log message
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH] mt76: mt7615: remove unused variable in mt7615_mcu_set_bcn
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• RE: [PATCH 11/11] rtw88: debug: dump tx power indexes in use
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Wright Feng <Wright.Feng@xxxxxxxxxxx>
• RE: [EXT] Re: [4.20 PATCH] Revert "mwifiex: restructure rx_reorder_tbl_lock usage"
  • From: Ganapathi Bhat <gbhat@xxxxxxxxxxx>
• Re: [PATCH] wireless-regdb: update source of information for CU
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [PATCH] wireless-regdb: Expand 60 GHz band for Japan to 57-66 GHz
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• [ANN] wireless-regdb: master-2019-06-03
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [RFC PATCH v4] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
  • From: Jes Sorensen <jes.sorensen@xxxxxxxxx>
• WARNING: suspicious RCU usage in in_dev_dump_addr
  • From: syzbot <syzbot+bad6e32808a3a97b1515@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 0/3] brcmfmac: sdio: Deal better w/ transmission errors waking from idle
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 1/3] Revert "brcmfmac: disable command decode in sdio_aos"
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 2/3] mmc: core: API for temporarily disabling auto-retuning due to errors
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 3/3] brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2] ath10k: avoid leaving .bss_info_changed prematurely
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• Re: [PATCH] ath10k: avoid leaving .bss_info_changed prematurely
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: INFO: trying to register non-static key in mwifiex_unregister_dev
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH] carl9170: Fix misuse of device driver API
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• INFO: trying to register non-static key in mwifiex_unregister_dev
  • From: syzbot <syzbot+373e6719b49912399d21@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] Revert "cfg80211: fix processing world regdomain when non modular"
  • From: "Hodaszi, Robert" <Robert.Hodaszi@xxxxxxxx>
• Re: [RFC 0/8] nl80211: add 6GHz band support
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• RE: [EXT] INFO: trying to register non-static key in del_timer_sync (2)
  • From: Ganapathi Bhat <gbhat@xxxxxxxxxxx>
• [PATCH v3 1/2] mt76: mt7615: enable support for mesh
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• [PATCH v3 2/2] mt76: mt7615: fix slow performance when enable encryption
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• Re: [EXT] INFO: trying to register non-static key in del_timer_sync (2)
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] mt76: mt7615: enable support for mesh
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• Re: [RFC PATCH] ath9k: integrate AR92XX pci fixup code
  • From: Julian Calaby <julian.calaby@xxxxxxxxx>
• Re: iwl_mvm_add_new_dqa_stream_wk BUG in lib/list_debug.c:56
  • From: Marc Haber <mh+netdev@xxxxxxxxxxxx>
• Re: [RFC PATCH] ath9k: integrate AR92XX pci fixup code
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: [RFC PATCH] ath9k: integrate AR92XX pci fixup code
  • From: Julian Calaby <julian.calaby@xxxxxxxxx>
• [RFC PATCH] ath9k: integrate AR92XX pci fixup code
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• [PATCH] carl9170: Fix misuse of device driver API
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• RE: [EXT] Re: [PATCH] mwifiex: check for null return from skb_copy
  • From: Ganapathi Bhat <gbhat@xxxxxxxxxxx>
• Re: [PATCH 11/11] rtw88: debug: dump tx power indexes in use
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [EXT] Re: [PATCH] mwifiex: check for null return from skb_copy
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• RE: [EXT] INFO: trying to register non-static key in del_timer_sync (2)
  • From: Ganapathi Bhat <gbhat@xxxxxxxxxxx>
• RE: [EXT] Re: [PATCH] mwifiex: check for null return from skb_copy
  • From: Ganapathi Bhat <gbhat@xxxxxxxxxxx>
• Re: [PATCH 4/7] iwlwifi: print fseq info upon fw assert
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH] mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] iwlwifi: mvm: remove d3_sram debugfs file
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtlwifi: remove redundant assignment to variable k
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] rtlwifi: remove redundant assignment to variable k
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH 1/2] mwifiex: add support for host wakeup via PCIE wake#
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH] rtlwifi: remove redundant assignment to variable k
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH v2 2/2] mt76: mt7615: fix slow performance when enable encryption
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• [PATCH v2 1/2] mt76: mt7615: enable support for mesh
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• [PATCH] mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 1/2] mt76: mt7615: enable support for mesh
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• Re: [PATCH 1/2] mt76: mt7615: enable support for mesh
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 2/2] mt76: usb: do not always copy the first part of received frames
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 1/2] mt76: usb: fix rx A-MSDU support
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 0/2] mt76: usb: fix A-MSDU support
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [RFC PATCH v4] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• [PATCH 1/2] mt76: mt7615: enable support for mesh
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• [PATCH 2/2] mt76: mt7615: fix slow performance when enable encryption
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• [nl80211] 52f9c100b1: WARNING:at_net/wireless/core.c:#wiphy_register
  • From: kernel test robot <rong.a.chen@xxxxxxxxx>
• Re: [PATCH 1/2] mwifiex: add support for host wakeup via PCIE wake#
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 00/16] wilc1000: move out of staging
  • From: <Ajay.Kathat@xxxxxxxxxxxxx>
• Re: [PATCH 00/16] wilc1000: move out of staging
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 00/16] wilc1000: move out of staging
  • From: <Ajay.Kathat@xxxxxxxxxxxxx>
• Re: [PATCH v3] {nl,mac}80211: allow 4addr AP operation on crypto controlled devices
  • From: Manikanta Pubbisetty <mpubbise@xxxxxxxxxxxxxx>
• Re: [PATCH] rtlwifi: remove redundant assignment to variable badworden
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH] rtlwifi: remove redundant assignment to variable badworden
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [RFC 1/8] nl80211: add 6GHz band definition to enum nl80211_band
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [RFC 1/8] nl80211: add 6GHz band definition to enum nl80211_band
  • From: Jeff Johnson <jjohnson@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [RFC 1/8] nl80211: add 6GHz band definition to enum nl80211_band
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [RFC 1/8] nl80211: add 6GHz band definition to enum nl80211_band
  • From: Jeff Johnson <jjohnson@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mwifiex: Fix possible buffer overflows at parsing bss descriptor
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] wireless-regdb: update source of information for CU
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH wireless-drivers] mt76: usb: fix buffer allocation for scatter-gather capable devices
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• RE: [PATCH 2/2] mwifiex: add support for WIPHY_WOWLAN_ANY
  • From: Ganapathi Bhat <gbhat@xxxxxxxxxxx>
• RE: [PATCH 1/2] mwifiex: add support for host wakeup via PCIE wake#
  • From: Ganapathi Bhat <gbhat@xxxxxxxxxxx>
• [PATCH v5] ath10k: add support for controlling tx power to a station
  • From: Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxx>
• Re: [PATCH wireless-drivers] mt76: usb: fix buffer allocation for scatter-gather capable devices
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• iwl_mvm_add_new_dqa_stream_wk BUG in lib/list_debug.c:56
  • From: Marc Haber <mh+netdev@xxxxxxxxxxxx>
• Re: cellular modem APIs - take 2
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• RE: [PATCH 01/11] rtw88: resolve order of tx power setting routines
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• Re: [PATCH 01/11] rtw88: resolve order of tx power setting routines
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• RE: [PATCH 01/11] rtw88: resolve order of tx power setting routines
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• Re: [PATCH 01/11] rtw88: resolve order of tx power setting routines
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• Re: [PATCH wireless-drivers] mt76: usb: fix buffer allocation for scatter-gather capable devices
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• Re: [PATCH 01/11] rtw88: resolve order of tx power setting routines
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• RE: [PATCH] rtw88: Remove set but not used variable 'ip_sel' and 'orig'
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• RE: [PATCH 01/11] rtw88: resolve order of tx power setting routines
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• [PATCH] ath10k: fix PCIE device wake up failed
  • From: Miaoqing Pan <miaoqing@xxxxxxxxxxxxxx>
• [PATCH wireless-drivers] mt76: usb: fix buffer allocation for scatter-gather capable devices
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: cellular modem APIs - take 2
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• Re: cellular modem APIs - take 2
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• Re: cellular modem APIs - take 2
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: cellular modem APIs - take 2
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: cellular modem APIs - take 2
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: cellular modem APIs - take 2
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [RFC PATCH v3] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [RFC PATCH v3] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [PATCH 02/10] cfg80211: use BIT_ULL in cfg80211_parse_mbssid_data()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: FYI: vendor specific nl80211 API upstream
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• Re: [PATCH] rtlwifi: Fix null-pointer dereferences in error handling code of rtl_pci_probe()
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH 01/11] rtw88: resolve order of tx power setting routines
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH] rtw88: Remove set but not used variable 'ip_sel' and 'orig'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] mt76: Remove set but not used variables 'pid' and 'final_mpdu'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtlwifi: rtl8192cu: fix error handle when usb probe failed
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH 4/7] iwlwifi: print fseq info upon fw assert
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH 1/7] iwlwifi: mvm: remove d3_sram debugfs file
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 5/7] iwlwifi: fix AX201 killer sku loading firmware issue
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 7/7] iwlwifi: mvm: change TLC config cmd sent by rs to be async
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 6/7] iwlwifi: Fix double-free problems in iwl_req_fw_callback()
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 3/7] iwlwifi: clear persistence bit according to device family
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 4/7] iwlwifi: print fseq info upon fw assert
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 2/7] iwlwifi: fix load in rfkill flow for unified firmware
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 0/7] wlwifi: fixes intended for 5.2 2019-05-29
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 1/2] mwifiex: Fix possible buffer overflows at parsing bss descriptor
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH 0/2] Buffer overflow / read checks in mwifiex
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH 2/2] mwifiex: Abort at too short BSS descriptor element
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH 04/10] cfg80211: util: fix bit count off by one
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 01/10] cfg80211: report measurement start TSF correctly
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 03/10] mac80211: do not start any work during reconfigure flow
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 08/10] mac80211: use STA info in rate_control_send_low()
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 06/10] ieee80211: Add a missing extended capability flag definition
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 10/10] mac80211: extend __rate_control_send_low warning
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 09/10] mac80211: fill low rate even for HAS_RATE_CONTROL
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 07/10] mac80211: call rate_control_send_low() internally
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 05/10] cfg80211: Add a function to iterate all BSS entries
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 02/10] cfg80211: use BIT_ULL in cfg80211_parse_mbssid_data()
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 00/10] cfg80211/mac80211 patches from our internal tree 2019-05-29
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH] rtlwifi: Fix null-pointer dereferences in error handling code of rtl_pci_probe()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: FYI: vendor specific nl80211 API upstream
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] mt76: move mt76_get_rate in mt76-module
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2] ath10k: fix failure to set multiple fixed rate
  • From: Miaoqing Pan <miaoqing@xxxxxxxxxxxxxx>
• [PATCH 07/11] rtw88: correct power limit selection
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 10/11] rtw88: refine flow to get tx power index
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 04/11] rtw88: remove unused variable
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 11/11] rtw88: debug: dump tx power indexes in use
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 08/11] rtw88: update tx power limit table to RF v20
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 09/11] rtw88: remove all RTW_MAX_POWER_INDEX macro
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 06/11] rtw88: choose the lowest as world-wide power limit
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 03/11] rtw88: unify prefixes for tx power setting routine
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 05/11] rtw88: fix incorrect tx power limit at 5G
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 01/11] rtw88: resolve order of tx power setting routines
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 00/11] rtw88: power index setting routine updates and fixes
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 02/11] rtw88: do not use (void *) as argument
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH] rtlwifi: rtl8192cu: fix error handle when usb probe failed
  • From: <pkshih@xxxxxxxxxxx>
• [RFC PATCH v3] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• [PATCH] NFC: microread/pn544: Fix possible null pointer deference error
  • From: Young Xiao <92siuyang@xxxxxxxxx>
• [PATCH] mac80211: free peer keys before vif down in mesh
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Announcing Netdev 0x14
  • From: Jamal Hadi Salim <jhs@xxxxxxxxxxxx>
• Re: brcmfmac & DEL_INTERFACE
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• Re: brcmfmac & DEL_INTERFACE
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: FYI: vendor specific nl80211 API upstream
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• brcmfmac & DEL_INTERFACE
  • From: Denis Kenzior <denkenz@xxxxxxxxx>
• [PATCH] linux-firmware: rsi: add firmware image for redpine 9116 chipset
  • From: Siva Rebbagondla <siva8118@xxxxxxxxx>
• [PATCH] linux-firmware: rsi: update firmware images for Redpine 9113 chipset
  • From: Siva Rebbagondla <siva8118@xxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: INFO: trying to register non-static key in rtl_c2hcmd_launcher
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] network: wireless: p54u: Fix race between disconnect and firmware loading
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] network: wireless: p54u: Fix race between disconnect and firmware loading
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] rtlwifi: Fix null-pointer dereferences in error handling code of rtl_pci_probe()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtlwifi: Fix null-pointer dereferences in error handling code of rtl_pci_probe()
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH] ath10k: remove mmc_hw_reset while hif power down
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] b43: Avoid possible double calls to b43_one_core_detach()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] libertas: fix spelling mistake "Donwloading" -> "Downloading"
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore: spi: Fix a memory leaking bug in wl1271_probe()
  • From: Gen Zhang <blackgod016574@xxxxxxxxx>
• Re: [PATCH] rtlwifi: btcoex: remove unused function exhalbtc_stack_operation_notify
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtlwifi: btcoex: Remove set but not used variable 'len' and 'asso_type_v2'
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtlwifi: rtl8821ae: Remove set but not used variables 'cur_txokcnt' and 'b_last_is_cur_rdl_state'
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] rtlwifi: rtl8821ae: Remove unused GET_XXX and SET_XXX descriptor macros
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] rtlwifi: 8192de: Reduce indentation and fix coding style
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [wireless-regdb] [PATCH v3] wireless-regdb: Update regulatory rules for South Korea
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [PATCH] wlcore: spi: Fix a memory leaking bug in wl1271_probe()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] rt2x00: allow to specify watchdog interval
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] p54: Support boottime in scan results
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] p54: fix crash during initialization
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] brcmfmac: use strlcpy() instead of strcpy()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] brcmfmac: fix typos in code comments
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] nl80211: fill all policy .type entries
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore: spi: Fix a memory leaking bug in wl1271_probe()
  • From: Gen Zhang <blackgod016574@xxxxxxxxx>
• Re: [PATCH] network: wireless: p54u: Fix race between disconnect and firmware loading
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [RFC] rtlwifi: rtl8821ae: Use inline routines rather than macros for descriptor word 0
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtlwifi: Fix null-pointer dereferences in error handling code of rtl_pci_probe()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• FYI: vendor specific nl80211 API upstream
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] rtw88: pci: use ieee80211_ac_numbers instead of 0-3
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH V2 4/6] mac80211: HE: add Spatial Reuse IE parsing support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V2 5/6] mac80211: allow setting spatial reuse parameters from bss_conf
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V2 3/6] ath11k: add TWT support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V2 6/6] ath11k: add spatial reuse support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V2 1/6] mac80211: dynamically enable the TWT requester support on STA interfaces
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V2 2/6] mac80211: allow turning TWT responder support on and off via netlink
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V2 0/6] mac80211: HE: add TWT and SPR/OBSSPD support
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH] rtw88: Make some symbols static
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtw88: avoid circular locking between local->iflist_mtx and rtwdev->mutex
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore: spi: Fix a memory leaking bug in wl1271_probe()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5.2] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 5.2 v3] rtw88: fix unassigned rssi_level in rtw_sta_info
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 5.1] rtw88: fix subscript above array bounds compiler warning
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH v2] nl80211: require and validate vendor command policy
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] nl80211: require and validate vendor command policy
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume【请注意，邮件由linux-rockchip-bounces+shawn.lin=rock-chips.com@xxxxxxxxxxxxxxxxxxx代发】
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH 3/3][V2] lib: re-introduce new match_string() helper/macro
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/3][V2] treewide: rename match_string() -> __match_string()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/3][V2] lib: fix match_string() helper on -1 array size
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: brcmfmac support for BCM4359 sdio on arm64
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• brcmfmac support for BCM4359 sdio on arm64
  • From: Christian Hewitt <christianshewitt@xxxxxxxxx>
• Re: [PATCH V2] iw: print HE capabilities
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH V2] iw: print HE capabilities
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• [PATCH V2] iw: print HE capabilities
  • From: John Crispin <john@xxxxxxxxxxx>
• RE: [PATCH v2] ath10k: add support for simulate crash on SDIO chip
  • From: Wen Gong <wgong@xxxxxxxxxxxxxxxx>
• RE: [PATCH] ath10k: Remove ATH10K_STATE_RESTARTED in simulate fw crash
  • From: Wen Gong <wgong@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] ath10k: add support for firmware crash recovery on SDIO chip
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• [PATCH] ath10k: add report MIC error for sdio chip
  • From: Wen Gong <wgong@xxxxxxxxxxxxxx>
• RE: [PATCH] ath10k: add support for simulate crash on SDIO chip
  • From: Wen Gong <wgong@xxxxxxxxxxxxxxxx>
• [PATCH] ath10k: fix failure to set multiple fixed rate
  • From: Miaoqing Pan <miaoqing@xxxxxxxxxxxxxx>
• [PATCH] mac80211: Do not use stack memory with scatterlist for GMAC
  • From: Jouni Malinen <j@xxxxx>
• linux-next: Fixes tag needs some work in the wireless-drivers-next tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [RFC 0/8] nl80211: add 6GHz band support
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] rtl8xxxu: Add watchdog to update rate mask by signal strength
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• [RFC PATCH 2/2] mac80211: implement HE support for mesh
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• [RFC PATCH 1/2] mac80211_hwsim: Register support for HE meshpoint
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• cellular modem APIs - take 2
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [RFC PATCH 2/2] rtl8xxxu: Add watchdog to update rate mask by signal strength
  • From: Chris Chiu <chiu@xxxxxxxxxxxx>
• Re: [PATCH] netlink: fix station_info pertid memory leak
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 4/4] mt76: mt7615: rearrange locking in mt7615_config
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 3/4] mt76: mt7615: init get_txpower mac80211 callback
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 2/4] mt76: mt7615: add the capability to configure tx power
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/4] mt76: generalize mt76_get_txpower for 4x4:4 devices
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/4] add tx power configuration support to mt7615 driver
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Issue with Broadcom wireless in 5.2rc1 (was Re: [PATCH] mmc: sdhci: queue work after sdhci_defer_done())
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH] iwlwifi: fix warning iwl-trans.h is included more than once
  • From: Hariprasad Kelam <hariprasad.kelam@xxxxxxxxx>
• [PATCH] rtlwifi: btcoex: remove unused function exhalbtc_stack_operation_notify
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] rtlwifi: btcoex: Remove set but not used variable 'len' and 'asso_type_v2'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] rtlwifi: rtl8821ae: Remove set but not used variables 'cur_txokcnt' and 'b_last_is_cur_rdl_state'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] netlink: fix station_info pertid memory leak
  • From: Andy Strohman <andrew@xxxxxxxxxxxxxxxxxx>
• [PATCH v2] mac80211: mesh: fix RCU warning
  • From: Thomas Pedersen <thomas@xxxxxxxx>
• Re: [PATCH] mac80211: mesh: fix RCU warning
  • From: Thomas Pedersen <thomas@xxxxxxxx>
• [PATCH] p54: Support boottime in scan results
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: [PATCH] network: wireless: p54u: Fix race between disconnect and firmware loading
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: [RFC 0/8] nl80211: add 6GHz band support
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [RFC 0/8] nl80211: add 6GHz band support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] wlcore: sdio: Fix a memory leaking bug in wl1271_probe()
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] mac80211: mesh: fix RCU warning
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2] ath10k: fix fw crash by moving chip reset after napi disabled
  • From: Miaoqing Pan <miaoqing@xxxxxxxxxxxxxx>
• [PATCH] wlcore: spi: Fix a memory leaking bug in wl1271_probe()
  • From: Gen Zhang <blackgod016574@xxxxxxxxx>
• [PATCH v2] wlcore: sdio: Fix a memory leaking bug in wl1271_probe()
  • From: Gen Zhang <blackgod016574@xxxxxxxxx>
• Re: [PATCH] ath10k: add missing error handling
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] qtnfmac: add support for Topaz chipsets
  • From: Igor Mitsyanko <igor.mitsyanko.os@xxxxxxxxxxxxx>
• Re: [PATCH 00/16] wilc1000: move out of staging
  • From: <Ajay.Kathat@xxxxxxxxxxxxx>
• Re: [PATCH] ath10k: add missing error handling
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH v2 5.2] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH] iw: print HE capabilities
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• Re: [PATCH v2] sdio: Fix a memory leaking bug in wl1271_probe()
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 00/16] wilc1000: move out of staging
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 00/16] wilc1000: move out of staging
  • From: <Ajay.Kathat@xxxxxxxxxxxxx>
• Re: [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH] iw: add HE support to station dump call
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 3/7] brcmsmac: switch source files to using SPDX license identifier
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wireless: fix intel typos in code comments
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] net: fix typos in code comments
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v3] ath10k: add support for firmware crash recovery on SDIO chip
  • From: Claire Chang <tientzu@xxxxxxxxxx>
• Re: [PATCH] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH V2] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: ath10k QCA9377 firmware crashes and fails to recover
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] ath10k: add missing error handling
  • From: Claire Chang <tientzu@xxxxxxxxxxxx>
• ath10k QCA9377 firmware crashes and fails to recover
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [PATCH] rsi: Properly initialize data in rsi_sdio_ta_reset
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• [PATCH AUTOSEL 5.1 047/375] mt76: remove mt76_queue dependency from tx_queue_skb function pointer
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 041/375] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 060/375] iwlwifi: pcie: don't crash on invalid RX interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 076/375] mac80211/cfg80211: update bss channel on channel switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 052/317] iwlwifi: pcie: don't crash on invalid RX interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 066/317] mac80211/cfg80211: update bss channel on channel switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 074/317] mwifiex: prevent an array overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 075/317] rsi: Fix NULL pointer dereference in kmalloc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 076/317] net: cw1200: fix a NULL pointer dereference
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 077/317] at76c50x-usb: Don't register led_trigger if usb_register_driver failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 081/317] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 027/244] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 043/244] iwlwifi: pcie: don't crash on invalid RX interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 052/244] mac80211/cfg80211: update bss channel on channel switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 058/244] mwifiex: prevent an array overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 059/244] rsi: Fix NULL pointer dereference in kmalloc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 061/244] at76c50x-usb: Don't register led_trigger if usb_register_driver failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 064/244] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 018/167] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 029/167] iwlwifi: pcie: don't crash on invalid RX interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 034/167] mac80211/cfg80211: update bss channel on channel switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 039/167] net: cw1200: fix a NULL pointer dereference
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 038/167] mwifiex: prevent an array overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 041/167] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 040/167] at76c50x-usb: Don't register led_trigger if usb_register_driver failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 011/114] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 016/114] iwlwifi: pcie: don't crash on invalid RX interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 023/114] mwifiex: prevent an array overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 024/114] net: cw1200: fix a NULL pointer dereference
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 020/114] mac80211/cfg80211: update bss channel on channel switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 025/114] at76c50x-usb: Don't register led_trigger if usb_register_driver failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 026/114] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 15/92] net: cw1200: fix a NULL pointer dereference
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 17/92] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 14/92] mwifiex: prevent an array overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 11/92] mac80211/cfg80211: update bss channel on channel switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 16/92] at76c50x-usb: Don't register led_trigger if usb_register_driver failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 07/92] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 060/244] net: cw1200: fix a NULL pointer dereference
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 035/317] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v3] ath10k: add support for firmware crash recovery on SDIO chip
  • From: Wen Gong <wgong@xxxxxxxxxxxxxx>
• RE: [PATCH v2] ath10k: add support for simulate crash on SDIO chip
  • From: Wen Gong <wgong@xxxxxxxxxxxxxxxx>
• [PATCH] ath10k: fix fw crash by moving chip reset after napi disabled
  • From: Miaoqing Pan <miaoqing@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] ath10k: update HOST capability qmi message
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] staging: wilc1000: remove redundant masking of pkt_offset
  • From: <Adham.Abozaeid@xxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] rtl8xxxu: Add watchdog to update rate mask by signal strength
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Add support for new channels on 60GHz band
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH 2/2] mac80211: add support for the ADDBA extension element
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 1/2] mac80211: add ieee80211_get_he_iftype_cap() helper
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH] staging: wilc1000: remove redundant masking of pkt_offset
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] brcmfmac: use strlcpy() instead of strcpy()
  • From: neojou@xxxxxxxxx
• Re: [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 0/3] brcmfmac: sdio: Deal better w/ transmission errors waking from sleep
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2] brcmfmac: fix typos in code comments
  • From: Rafał Miłecki <rafal@xxxxxxxxxx>
• [PATCH 4/4] rtlwifi: rtl8821ae: Convert inline routines to little-endian words
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 3/4] rtlwifi: rtl8821ae: Convert macros that set descriptor
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 2/4] rtlwifi: rtl8821ae: Replace local bit manipulation macros
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 1/4] rtlwifi: rtl8821ae: Remove unused GET_XXX and SET_XXX descriptor macros
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 0/4] rtlwifi: rtl8821ae: Convert bit manipulation macros to static inline routines
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH 1/7] brcm80211: switch common header files to using SPDX license identifier
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] wil6210: Add EDMG channel support
  • From: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] nl80211: Add support for EDMG channels
  • From: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] Add support for new channels on 60GHz band
  • From: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] nl80211: Add support for EDMG channels
  • From: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
• [PATCH] network: wireless: p54u: Fix race between disconnect and firmware loading
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mac80211: remove warning message
  • From: Yibo Zhao <yiboz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] nl80211: Add support for EDMG channels
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH v2] brcmfmac: fix typos in code comments
  • From: Weitao Hou <houweitaoo@xxxxxxxxx>
• Re: [PATCH] wireless: fix typos in code comments
  • From: Rafał Miłecki <rafal@xxxxxxxxxx>
• [RFC 3/8] cfg80211: util: add 6GHz channel to freq conversion and vice versa
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 6/8] cfg80211: use same IR permissive rules for 6GHz band
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 1/8] nl80211: add 6GHz band definition to enum nl80211_band
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 7/8] cfg80211: ibss: use 11a mandatory rates for 6GHz band operation
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 5/8] cfg80211: add 6GHz in code handling array with NUM_NL80211_BANDS entries
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 4/8] cfg80211: extend ieee80211_operating_class_to_band() for 6GHz
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 8/8] cfg80211: apply same mandatory rate flags for 5GHz and 6GHz
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 2/8] cfg80211: add 6GHz UNII band definitions
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC 0/8] nl80211: add 6GHz band support
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH 6/7] mac80211: propagate spatial reuse info into ieee80211_sta
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 7/7] ath11k: add spatial reuse support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 1/7] mac80211: HE: dynamically enable the TWT requester support on STA interfaces
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 3/7] ath11k: add TWT support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 5/7] mac80211: HE: allow setting spatial reuse parameters when bringing up an AP
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 4/7] mac80211: HE: add Spatial Reuse IE parsing support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 2/7] mac80211: HE: allow turning TWT responder support on and off via netlink
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 0/7] mac80211: HE: add TWT and SPR/OBSSPD support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH] iw: print HE capabilities
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 6/8] ath11k: add defines for max MCS rates per phymode
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 8/8] ath11k: add HE support
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 5/8] ath11k: extend reading of FW capabilities
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 2/8] ath11k: fix some whitespace errors
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 7/8] ath11k: handle rx status for HE frames
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 4/8] ath11k: add HE handling to the debug code
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 3/8] ath11k: move phymode selection from function to array lookup
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 1/8] mac80211: propagate HE operation info into ieee80211_sta
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 0/8] ath11k: add HE support
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 0/3] brcmfmac: sdio: Deal better w/ transmission errors waking from sleep
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH 3/3] iwlwifi: add support for quz firmwares
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/3] brcmfmac: re-enable command decode in sdio_aos for BRCM 4354
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [mac80211] 3df7894e9b: WARNING:at_net/mac80211/rate.c:#__rate_control_send_low[mac80211]
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] net: fix typos in code comments
  • From: Weitao Hou <houweitaoo@xxxxxxxxx>
• [PATCH] wireless: fix intel typos in code comments
  • From: Weitao Hou <houweitaoo@xxxxxxxxx>
• [PATCH] wireless: fix typos in code comments
  • From: Weitao Hou <houweitaoo@xxxxxxxxx>
• Re: NXP NFC version and ACPI
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• [PATCH] net: wireless: p54: fix crash during initialization
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: syzbot <syzbot+200d4bb11b23d929335f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] qtnfmac: add support for Topaz chipsets
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: syzbot <syzbot+200d4bb11b23d929335f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: syzbot <syzbot+200d4bb11b23d929335f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: syzbot <syzbot+200d4bb11b23d929335f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in p54u_load_firmware_cb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 0/3] brcmfmac: sdio: Deal better w/ transmission errors waking from sleep
  • From: Avri Altman <Avri.Altman@xxxxxxx>