Hi,
Some features of 802.11ax without central organizing (AP) STA can also be
used in mesh mode. The main goal is to get HE mesh working with ath11k.
For persons without ath11k compatible hw, hwsim can be used in the as basis
for further development of these features.
* v5
- rebased patches
- moved ath11k meshpoint HE capabilities filter to avoid lines over 80
characters
- add patch to disable HE SU phy capabilities to work around problems
with WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1 firmware
* v4
- switch order of the mac80211 HE mesh support and mac80211_hwsim support
- drop ie_len variable from ieee80211_ie_len_he_cap and
ieee80211_ie_build_he_oper
- switch to function ieee80211_get_he_iftype_cap instead of implementing new
function ieee80211_get_he_mesh_cap
- allow ieee80211_ie_len_he_cap to calculate length for non-mesh HE cap
- dropped he_support workaround in ath11k because now all phy_modes are
HE phy modes
* v3
- force ath11k PHY mode for meshpoint vif to HE mode to avoid hang of
firmware when HE (or VHT on 2.4GHz) device tries to connect
* v2:
- add of ath11k patch
* v1:
- initial RFC
Sven Eckelmann (4):
mac80211: implement HE support for mesh
mac80211_hwsim: Register support for HE meshpoint
ath11k: register HE mesh capabilities
ath11k: Disable SU support in meshpoint mode
drivers/net/wireless/ath/ath11k/mac.c | 84 ++++++++
drivers/net/wireless/mac80211_hwsim.c | 283 +++++++++++++++++---------
net/mac80211/ieee80211_i.h | 2 +
net/mac80211/mesh.c | 62 ++++++
net/mac80211/mesh.h | 4 +
net/mac80211/mesh_plink.c | 12 +-
net/mac80211/util.c | 49 +++++
7 files changed, 401 insertions(+), 95 deletions(-)
--
2.20.1
