Signed-off-by: Alexei Avshalom Lazar <ailizaro@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/wil6210/Kconfig | 11 ++
drivers/net/wireless/ath/wil6210/Makefile | 1 +
drivers/net/wireless/ath/wil6210/ioctl.c | 245 +++++++++++++++++++++++++++++
drivers/net/wireless/ath/wil6210/netdev.c | 8 +
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
include/uapi/linux/wil6210_uapi.h | 77 +++++++++
6 files changed, 343 insertions(+)
create mode 100644 drivers/net/wireless/ath/wil6210/ioctl.c
create mode 100644 include/uapi/linux/wil6210_uapi.h
diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig
index 0d1a8da..48b14de 100644
--- a/drivers/net/wireless/ath/wil6210/Kconfig
+++ b/drivers/net/wireless/ath/wil6210/Kconfig
@@ -53,3 +53,14 @@ config WIL6210_DEBUGFS
option if you are interested in debugging the driver.
If unsure, say Y to make it easier to debug problems.
+
+config WIL6210_WRITE_IOCTL
+ bool "wil6210 write ioctl to the device"
+ depends on WIL6210
+ default y
+ help
+ Say Y here to allow write-access from user-space to
+ the device memory through ioctl. This is useful for
+ debugging purposes only.
+
+ If unsure, say N.
diff --git a/drivers/net/wireless/ath/wil6210/Makefile b/drivers/net/wireless/ath/wil6210/Makefile
index 53a0d995..83a9696 100644
--- a/drivers/net/wireless/ath/wil6210/Makefile
+++ b/drivers/net/wireless/ath/wil6210/Makefile
@@ -12,6 +12,7 @@ wil6210-y += txrx.o
wil6210-y += txrx_edma.o
wil6210-y += debug.o
wil6210-y += rx_reorder.o
+wil6210-y += ioctl.o
wil6210-y += fw.o
wil6210-y += pm.o
wil6210-y += pmc.o
diff --git a/drivers/net/wireless/ath/wil6210/ioctl.c b/drivers/net/wireless/ath/wil6210/ioctl.c
new file mode 100644
index 0000000..a3af6f5
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/ioctl.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: ISC
+/* Copyright (c) 2014,2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/uaccess.h>
+
+#include "wil6210.h"
+#include <uapi/linux/wil6210_uapi.h>
+
+#define wil_hex_dump_ioctl(prefix_str, buf, len) \
+ print_hex_dump_debug("DBG[IOC ]" prefix_str, \
+ DUMP_PREFIX_OFFSET, 16, 1, buf, len, true)
+#define wil_dbg_ioctl(wil, fmt, arg...) wil_dbg(wil, "DBG[IOC ]" fmt, ##arg)
+
+#define WIL_PRIV_DATA_MAX_LEN 8192
+#define CMD_SET_AP_WPS_P2P_IE "SET_AP_WPS_P2P_IE"
+/* max memory block for read/write in bytes. BAR size + spare */
+#define WIL_MAX_MEM_BLOCK_SIZE (8 * 1024 * 1024)
+
+struct wil_android_priv_data {
+ char *buf;
+ int used_len;
+ int total_len;
+};
+
+static void __iomem *wil_ioc_addr(struct wil6210_priv *wil, u32 addr,
+ u32 size, enum wil_memio_op op)
+{
+ void __iomem *a;
+ u32 off;
+
+ switch (op & wil_mmio_addr_mask) {
+ case wil_mmio_addr_linker:
+ a = wmi_buffer(wil, cpu_to_le32(addr));
+ break;
+ case wil_mmio_addr_ahb:
+ a = wmi_addr(wil, addr);
+ break;
+ case wil_mmio_addr_bar:
+ a = wmi_addr(wil, addr + WIL6210_FW_HOST_OFF);
+ break;
+ default:
+ wil_err(wil, "Unsupported address mode, op = 0x%08x\n", op);
+ return NULL;
+ }
+
+ off = a - wil->csr;
+ if (size >= wil->bar_size - off) {
+ wil_err(wil,
+ "Invalid requested block: off(0x%08x) size(0x%08x)\n",
+ off, size);
+ return NULL;
+ }
+
+ return a;
+}
+
+static int wil_ioc_memio_dword(struct wil6210_priv *wil, void __user *data)
+{
+ struct wil_memio io;
+ void __iomem *a;
+ bool need_copy = false;
+
+ if (copy_from_user(&io, data, sizeof(io)))
+ return -EFAULT;
+
+ wil_dbg_ioctl(wil, "IO: addr = 0x%08x val = 0x%08x op = 0x%08x\n",
+ io.addr, io.val, io.op);
+
+ a = wil_ioc_addr(wil, io.addr, sizeof(u32), io.op);
+ if (!a) {
+ wil_err(wil, "invalid address 0x%08x, op = 0x%08x\n", io.addr,
+ io.op);
+ return -EINVAL;
+ }
+ /* operation */
+ switch (io.op & wil_mmio_op_mask) {
+ case wil_mmio_read:
+ io.val = readl_relaxed(a);
+ need_copy = true;
+ break;
+#if defined(CONFIG_WIL6210_WRITE_IOCTL)
+ case wil_mmio_write:
+ writel_relaxed(io.val, a);
+ wmb(); /* make sure write propagated to HW */
+ break;
+#endif
+ default:
+ wil_err(wil, "Unsupported operation, op = 0x%08x\n", io.op);
+ return -EINVAL;
+ }
+
+ if (need_copy) {
+ wil_dbg_ioctl(wil,
+ "IO done: addr(0x%08x) val(0x%08x) op(0x%08x)\n",
+ io.addr, io.val, io.op);
+ if (copy_to_user(data, &io, sizeof(io)))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int wil_ioc_memio_block(struct wil6210_priv *wil, void __user *data)
+{
+ struct wil_memio_block io;
+ void *block;
+ void __iomem *a;
+ int rc = 0;
+
+ if (copy_from_user(&io, data, sizeof(io)))
+ return -EFAULT;
+
+ wil_dbg_ioctl(wil, "IO: addr = 0x%08x size = 0x%08x op = 0x%08x\n",
+ io.addr, io.size, io.op);
+
+ /* size */
+ if (io.size > WIL_MAX_MEM_BLOCK_SIZE) {
+ wil_err(wil, "size is too large: 0x%08x\n", io.size);
+ return -EINVAL;
+ }
+ if (io.size % 4) {
+ wil_err(wil, "size is not multiple of 4: 0x%08x\n", io.size);
+ return -EINVAL;
+ }
+
+ a = wil_ioc_addr(wil, io.addr, io.size, io.op);
+ if (!a) {
+ wil_err(wil, "invalid address 0x%08x, op = 0x%08x\n", io.addr,
+ io.op);
+ return -EINVAL;
+ }
+
+ block = kmalloc(io.size, GFP_USER);
+ if (!block)
+ return -ENOMEM;
+
+ /* operation */
+ switch (io.op & wil_mmio_op_mask) {
+ case wil_mmio_read:
+ wil_memcpy_fromio_32(block, a, io.size);
+ wil_hex_dump_ioctl("Read ", block, io.size);
+ if (copy_to_user(io.block, block, io.size)) {
+ rc = -EFAULT;
+ goto out_free;
+ }
+ break;
+#if defined(CONFIG_WIL6210_WRITE_IOCTL)
+ case wil_mmio_write:
+ if (copy_from_user(block, io.block, io.size)) {
+ rc = -EFAULT;
+ goto out_free;
+ }
+ wil_memcpy_toio_32(a, block, io.size);
+ wmb(); /* make sure write propagated to HW */
+ wil_hex_dump_ioctl("Write ", block, io.size);
+ break;
+#endif
+ default:
+ wil_err(wil, "Unsupported operation, op = 0x%08x\n", io.op);
+ rc = -EINVAL;
+ break;
+ }
+
+out_free:
+ kfree(block);
+ return rc;
+}
+
+static int wil_ioc_android(struct wil6210_priv *wil, void __user *data)
+{
+ int rc = 0;
+ char *command;
+ struct wil_android_priv_data priv_data;
+
+ wil_dbg_ioctl(wil, "ioc_android\n");
+
+ if (copy_from_user(&priv_data, data, sizeof(priv_data)))
+ return -EFAULT;
+
+ if (priv_data.total_len <= 0 ||
+ priv_data.total_len >= WIL_PRIV_DATA_MAX_LEN) {
+ wil_err(wil, "invalid data len %d\n", priv_data.total_len);
+ return -EINVAL;
+ }
+
+ command = kmalloc(priv_data.total_len + 1, GFP_KERNEL);
+ if (!command)
+ return -ENOMEM;
+
+ if (copy_from_user(command, priv_data.buf, priv_data.total_len)) {
+ rc = -EFAULT;
+ goto out_free;
+ }
+
+ /* Make sure the command is NUL-terminated */
+ command[priv_data.total_len] = '\0';
+
+ wil_dbg_ioctl(wil, "ioc_android: command = %s\n", command);
+
+ /* P2P not supported, but WPS is (in AP mode).
+ * Ignore those in order not to block WPS functionality
+ * in non-P2P mode.
+ */
+ if (strncasecmp(command, CMD_SET_AP_WPS_P2P_IE,
+ strlen(CMD_SET_AP_WPS_P2P_IE)) == 0)
+ rc = 0;
+ else
+ rc = -ENOIOCTLCMD;
+
+out_free:
+ kfree(command);
+ return rc;
+}
+
+int wil_ioctl(struct wil6210_priv *wil, void __user *data, int cmd)
+{
+ int ret;
+
+ ret = wil_pm_runtime_get(wil);
+ if (ret < 0)
+ return ret;
+
+ switch (cmd) {
+ case WIL_IOCTL_MEMIO:
+ ret = wil_ioc_memio_dword(wil, data);
+ break;
+ case WIL_IOCTL_MEMIO_BLOCK:
+ ret = wil_ioc_memio_block(wil, data);
+ break;
+ case (SIOCDEVPRIVATE + 1):
+ ret = wil_ioc_android(wil, data);
+ break;
+ default:
+ wil_dbg_ioctl(wil, "Unsupported IOCTL 0x%04x\n", cmd);
+ wil_pm_runtime_put(wil);
+ return -ENOIOCTLCMD;
+ }
+
+ wil_pm_runtime_put(wil);
+
+ wil_dbg_ioctl(wil, "ioctl(0x%04x) -> %d\n", cmd, ret);
+ return ret;
+}
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index 59f041d..bbe5e0a 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -91,12 +91,20 @@ static int wil_stop(struct net_device *ndev)
return rc;
}
+static int wil_do_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
+{
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+
+ return wil_ioctl(wil, ifr->ifr_data, cmd);
+}
+
static const struct net_device_ops wil_netdev_ops = {
.ndo_open = wil_open,
.ndo_stop = wil_stop,
.ndo_start_xmit = wil_start_xmit,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = wil_do_ioctl,
};
static int wil6210_netdev_poll_rx(struct napi_struct *napi, int budget)
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index d8c78a0..f200171 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -1380,6 +1380,7 @@ void wil_set_crypto_rx(u8 key_index, enum wmi_key_usage key_usage,
int wil_iftype_nl2wmi(enum nl80211_iftype type);
+int wil_ioctl(struct wil6210_priv *wil, void __user *data, int cmd);
int wil_request_firmware(struct wil6210_priv *wil, const char *name,
bool load);
int wil_request_board(struct wil6210_priv *wil, const char *name);
diff --git a/include/uapi/linux/wil6210_uapi.h b/include/uapi/linux/wil6210_uapi.h
new file mode 100644
index 0000000..860bc7c
--- /dev/null
+++ b/include/uapi/linux/wil6210_uapi.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: ISC */
+/*
+ * Copyright (c) 2014 Qualcomm Atheros, Inc.
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __WIL6210_UAPI_H__
+#define __WIL6210_UAPI_H__
+
+#if !defined(__KERNEL__)
+#define __user
+#endif
+
+#include <linux/sockios.h>
+
+/* Numbers SIOCDEVPRIVATE and SIOCDEVPRIVATE + 1
+ * are used by Android devices to implement PNO (preferred network offload).
+ * Albeit it is temporary solution, use different numbers to avoid conflicts
+ */
+
+/**
+ * Perform 32-bit I/O operation to the card memory
+ *
+ * User code should arrange data in memory like this:
+ *
+ * struct wil_memio io;
+ * struct ifreq ifr = {
+ * .ifr_data = &io,
+ * };
+ */
+#define WIL_IOCTL_MEMIO (SIOCDEVPRIVATE + 2)
+
+/**
+ * Perform block I/O operation to the card memory
+ *
+ * User code should arrange data in memory like this:
+ *
+ * void *buf;
+ * struct wil_memio_block io = {
+ * .block = buf,
+ * };
+ * struct ifreq ifr = {
+ * .ifr_data = &io,
+ * };
+ */
+#define WIL_IOCTL_MEMIO_BLOCK (SIOCDEVPRIVATE + 3)
+
+/**
+ * operation to perform
+ *
+ * @wil_mmio_op_mask - bits defining operation,
+ * @wil_mmio_addr_mask - bits defining addressing mode
+ */
+enum wil_memio_op {
+ wil_mmio_read = 0,
+ wil_mmio_write = 1,
+ wil_mmio_op_mask = 0xff,
+ wil_mmio_addr_linker = 0 << 8,
+ wil_mmio_addr_ahb = 1 << 8,
+ wil_mmio_addr_bar = 2 << 8,
+ wil_mmio_addr_mask = 0xff00,
+};
+
+struct wil_memio {
+ uint32_t op; /* enum wil_memio_op */
+ uint32_t addr; /* should be 32-bit aligned */
+ uint32_t val;
+};
+
+struct wil_memio_block {
+ uint32_t op; /* enum wil_memio_op */
+ uint32_t addr; /* should be 32-bit aligned */
+ uint32_t size; /* should be multiple of 4 */
+ void __user *block; /* block address */
+};
+
+#endif /* __WIL6210_UAPI_H__ */
--
2.7.4
