In the process of converting the bit manipulation macros were converted
to use GENMASK(), the compiler reported a value too big for the field.
The offending statement was trying to write 0x100 into a 5-bit field.
An accompaning comment says to set bit 3, thus the code is changed
appropriately.
This error has been in the driver since its initial submission.
Fixes: 29d00a3e46bb ("rtlwifi: rtl8192cu: Add routine trx")
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
index 0020adc004a5..9b5c7ec6b6f7 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
@@ -611,7 +611,7 @@ void rtl92cu_fill_fake_txdesc(struct ieee80211_hw *hw, u8 *pdesc,
SET_TX_DESC_NAV_USE_HDR(pdesc, 1);
} else {
SET_TX_DESC_HWSEQ_EN(pdesc, 1); /* Hw set sequence number */
- SET_TX_DESC_PKT_ID(pdesc, 0x100); /* set bit3 to 1. */
+ SET_TX_DESC_PKT_ID(pdesc, BIT(3)); /* set bit3 to 1. */
}
SET_TX_DESC_USE_RATE(pdesc, 1); /* use data rate which is set by Sw */
SET_TX_DESC_OWN(pdesc, 1);
--
2.22.0
