Enable multi-interface support for mt76x02u driver. For the moment
allow max two concurrent interfaces in order to preserve enough room
for ps traffic since we are using beacon slots for it.
I have successfully tested the following configuration:
- AP + STA
- AP0 + AP1
Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
---
.../net/wireless/mediatek/mt76/mt76x02_util.c | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
index fa45ed280ab1..476f0157a370 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
@@ -61,6 +61,20 @@ static const struct ieee80211_iface_limit mt76x02_if_limits[] = {
},
};
+static const struct ieee80211_iface_limit mt76x02u_if_limits[] = {
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_ADHOC)
+ }, {
+ .max = 2,
+ .types = BIT(NL80211_IFTYPE_STATION) |
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+ BIT(NL80211_IFTYPE_AP)
+ },
+};
+
static const struct ieee80211_iface_combination mt76x02_if_comb[] = {
{
.limits = mt76x02_if_limits,
@@ -75,6 +89,16 @@ static const struct ieee80211_iface_combination mt76x02_if_comb[] = {
}
};
+static const struct ieee80211_iface_combination mt76x02u_if_comb[] = {
+ {
+ .limits = mt76x02u_if_limits,
+ .n_limits = ARRAY_SIZE(mt76x02u_if_limits),
+ .max_interfaces = 2,
+ .num_different_channels = 1,
+ .beacon_int_infra_match = true,
+ }
+};
+
static void
mt76x02_led_set_config(struct mt76_dev *mdev, u8 delay_on,
u8 delay_off)
@@ -151,6 +175,8 @@ void mt76x02_init_device(struct mt76x02_dev *dev)
if (mt76_is_usb(dev)) {
hw->extra_tx_headroom += sizeof(struct mt76x02_txwi) +
MT_DMA_HDR_LEN;
+ wiphy->iface_combinations = mt76x02u_if_comb;
+ wiphy->n_iface_combinations = ARRAY_SIZE(mt76x02u_if_comb);
} else {
INIT_DELAYED_WORK(&dev->wdt_work, mt76x02_wdt_work);
--
2.21.0
