Issue: While removing and inserting the driver module, observed driver
loading is not successful.
Root cause: Card is not resetted completely without issuing cmd5.
Fix: Issued cmd5 properly.
Signed-off-by: Ganapathi Kondraju <ganapathirajukondraju@xxxxxxxxx>
---
drivers/net/wireless/rsi/rsi_91x_sdio.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index b42cd50..b3c7724 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -230,19 +230,16 @@ static void rsi_reset_card(struct sdio_func *pfunction)
rsi_dbg(ERR_ZONE, "%s: CMD0 failed : %d\n", __func__, err);
/* Issue CMD5, arg = 0 */
- if (!host->ocr_avail) {
- err = rsi_issue_sdiocommand(pfunction, SD_IO_SEND_OP_COND, 0,
- (MMC_RSP_R4 | MMC_CMD_BCR), &resp);
- if (err)
- rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
- __func__, err);
-
- host->ocr_avail = resp;
- }
+ err = rsi_issue_sdiocommand(pfunction, SD_IO_SEND_OP_COND, 0,
+ (MMC_RSP_R4 | MMC_CMD_BCR), &resp);
+ if (err)
+ rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
+ __func__, err);
+ card->ocr = resp;
/* Issue CMD5, arg = ocr. Wait till card is ready */
for (i = 0; i < 100; i++) {
err = rsi_issue_sdiocommand(pfunction, SD_IO_SEND_OP_COND,
- host->ocr_avail,
+ card->ocr,
(MMC_RSP_R4 | MMC_CMD_BCR), &resp);
if (err) {
rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
--
2.5.5
