Hi, > From: Jian-Hong Pan [mailto:jian-hong@xxxxxxxxxxxx] > > There is a mass of jobs between spin lock and unlock in the hardware > IRQ which will occupy much time originally. To make system work more > efficiently, this patch moves the jobs to the soft IRQ (bottom half) to > reduce the time in hardware IRQ. > > Signed-off-by: Jian-Hong Pan <jian-hong@xxxxxxxxxxxx> > --- > v2: > Change the spin_lock_irqsave/unlock_irqrestore to spin_lock/unlock in > rtw_pci_interrupt_handler. Because the interrupts are already disabled > in the hardware interrupt handler. > > v3: > Extend the spin lock protecting area for the TX path in > rtw_pci_interrupt_threadfn by Realtek's suggestion > > drivers/net/wireless/realtek/rtw88/pci.c | 33 +++++++++++++++++++----- > 1 file changed, 27 insertions(+), 6 deletions(-) > > diff --git a/drivers/net/wireless/realtek/rtw88/pci.c > b/drivers/net/wireless/realtek/rtw88/pci.c > index 00ef229552d5..a8c17a01f318 100644 > --- a/drivers/net/wireless/realtek/rtw88/pci.c > +++ b/drivers/net/wireless/realtek/rtw88/pci.c > @@ -866,12 +866,29 @@ static irqreturn_t rtw_pci_interrupt_handler(int irq, > void *dev) > { > struct rtw_dev *rtwdev = dev; > struct rtw_pci *rtwpci = (struct rtw_pci *)rtwdev->priv; > - u32 irq_status[4]; > > spin_lock(&rtwpci->irq_lock); > if (!rtwpci->irq_enabled) > goto out; > > + /* disable RTW PCI interrupt to avoid more interrupts before the end of > + * thread function > + */ > + rtw_pci_disable_interrupt(rtwdev, rtwpci); > +out: > + spin_unlock(&rtwpci->irq_lock); > + > + return IRQ_WAKE_THREAD; > +} > + > +static irqreturn_t rtw_pci_interrupt_threadfn(int irq, void *dev) > +{ > + struct rtw_dev *rtwdev = dev; > + struct rtw_pci *rtwpci = (struct rtw_pci *)rtwdev->priv; > + unsigned long flags; > + u32 irq_status[4]; > + > + spin_lock_irqsave(&rtwpci->irq_lock, flags); > rtw_pci_irq_recognized(rtwdev, rtwpci, irq_status); > > if (irq_status[0] & IMR_MGNTDOK) > @@ -891,8 +908,10 @@ static irqreturn_t rtw_pci_interrupt_handler(int irq, > void *dev) > if (irq_status[0] & IMR_ROK) > rtw_pci_rx_isr(rtwdev, rtwpci, RTW_RX_QUEUE_MPDU); > > -out: > - spin_unlock(&rtwpci->irq_lock); > + /* all of the jobs for this interrupt have been done */ > + if (rtw_flag_check(rtwdev, RTW_FLAG_RUNNING)) > + rtw_pci_enable_interrupt(rtwdev, rtwpci); I've applied this patch and tested it. But I failed to connect to AP, it seems that the scan_result is empty. And when I failed to connect to the AP, I found that the IMR is not enabled. I guess the check bypass the interrupt enable function. And I also found that *without MSI*, the driver is able to connect to the AP. Could you please verify this patch again with MSI interrupt enabled and send a v4? You can find my MSI patch on https://patchwork.kernel.org/patch/11081539/ > + spin_unlock_irqrestore(&rtwpci->irq_lock, flags); > > return IRQ_HANDLED; > } > @@ -1152,8 +1171,10 @@ static int rtw_pci_probe(struct pci_dev *pdev, > goto err_destroy_pci; > } > > - ret = request_irq(pdev->irq, &rtw_pci_interrupt_handler, > - IRQF_SHARED, KBUILD_MODNAME, rtwdev); > + ret = devm_request_threaded_irq(rtwdev->dev, pdev->irq, > + rtw_pci_interrupt_handler, > + rtw_pci_interrupt_threadfn, > + IRQF_SHARED, KBUILD_MODNAME, rtwdev); > if (ret) { > ieee80211_unregister_hw(hw); > goto err_destroy_pci; > @@ -1192,7 +1213,7 @@ static void rtw_pci_remove(struct pci_dev *pdev) > rtw_pci_disable_interrupt(rtwdev, rtwpci); > rtw_pci_destroy(rtwdev, pdev); > rtw_pci_declaim(rtwdev, pdev); > - free_irq(rtwpci->pdev->irq, rtwdev); > + devm_free_irq(rtwdev->dev, rtwpci->pdev->irq, rtwdev); > rtw_core_deinit(rtwdev); > ieee80211_free_hw(hw); > } > -- NACK Need to verify it with MSI https://patchwork.kernel.org/patch/11081539/ And hope v4 could fix it. Yan-Hsuan
