Linux USB Users

• Thread Index

• Re: [PATCH 0/4] USB & USBNET: loose DMA SG check and support usbnet DMA SG
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH 4/4] USBNET: ax88179_178a: enable tso if host supports sg dma
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 3/4] USBNET: support DMA SG
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 2/4] USB: XHCI: mark no_sg_limit
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 1/4] USB: introduce no_sg_limit field into usb_bus
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 0/4] USB & USBNET: loose DMA SG check and support usbnet DMA SG
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] chipidea: Use devm_request_irq()
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: [PATCH v3 1/3] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 2/2] chipidea: Use devm_request_irq()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] musb: don't reset endpoint data toggle on blackfin
  • From: Scott Jiang <scott.jiang.linux@xxxxxxxxx>
• Re: [PATCH v2 26/42] USB: ohci-at91: add usb_clk for transition to common clk framework
  • From: boris brezillon <b.brezillon@xxxxxxxxxxx>
• [PATCH V2] USB: EHCI: make ehci-w90X900 a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• Re: [PATCH 2/2] chipidea: Use devm_request_irq()
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: [PATCH 2/2] chipidea: Use devm_request_irq()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: move vbus regulator operation to core
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] chipidea: Use devm_request_irq()
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v4 1/5] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• [PATCH v4 4/5] net/usb/r8152: make sure the USB buffer is DMA-able
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• [PATCH v4 5/5] net/usb/r8152: adjust relative ocp function
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• [PATCH v4 2/5] net/usb/r815x: avoid to call mdio functions for runtime-suspended device
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• [PATCH v4 3/5] net/usb/r815x: change the return value for bind functions
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• Re: [PATCH 2/2] chipidea: Use devm_request_irq()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] chipidea: Use devm_request_irq()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] chipidea: Use devm_request_irq()
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] chipidea: Use devm_request_irq()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: move vbus regulator operation to core
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: move vbus regulator operation to core
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH v2 5/5] usb/gadget: mass_storage: merge usb_f_mass_storage module with u_ms module
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 4/5] usb/gadget: f_mass_storage: remove compatibility layer
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 1/5] usb/gadget: multi: convert to new interface of f_ecm
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 3/5] usb/gadget: multi: convert to new interface of f_mass_storage
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 2/5] usb/gadget: multi: convert to new interface of f_rndis
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 0/5] Equivalent of g_multi.ko with configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 1/1] usb/gadget: acm_ms: convert to new interface of f_mass_storage
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 0/1] Equivalent of g_acm_ms.ko with configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 06/19] usb/gadget: f_mass_storage: split fsg_common initialization into a number of functions
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 09/19] usb/gadget: f_mass_storage: use fsg_common_set_nluns in fsg_common_init
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 05/19] usb/gadget: f_mass_storage: use usb_gstrings_attach
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 13/19] usb/gadget: f_mass_storage: use fsg_common_set_inquiry_string in fsg_common_init
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 08/19] usb/gadget: f_mass_storage: use fsg_common_set_num_buffers in fsg_common_init
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 02/19] usb/gadget: create a utility module for mass_storage
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 10/19] usb/gadget: f_mass_storage: use fsg_common_set_ops/_private_data in fsg_common_init
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 11/19] usb/gadget: f_mass_storage: use fsg_common_set_cdev in fsg_common_init
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 03/19] usb/gadget: f_mass_storage: factor out a header file
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 15/19] usb/gadget: f_mass_storage: convert to new function interface with backward compatibility
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 04/19] usb/gadget: f_mass_storage: add a level of indirection for luns storage
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 18/19] usb/gadget: storage_common: add methods to show/store 'cdrom' and 'removable'
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 19/19] usb/gadget: f_mass_storage: add configfs support
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 14/19] usb/gadget: f_mass_storage: use fsg_common_run_thread in fsg_common_init
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 17/19] usb/gadget: storage_common: make attribute operations more generic
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 07/19] usb/gadget: f_mass_storage: use fsg_common_setup in fsg_common_init
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 16/19] usb/gadget: mass_storage: convert to new interface of f_mass_storage
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 12/19] usb/gadget: f_mass_storage: use fsg_common_create_luns in fsg_common_init
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 00/19] Equivalent of g_mass_storage with configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 01/19] usb/gadget: configfs: add a method to unregister the gadget
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH] usb: dwc3: use dev_get_platdata()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 01/15] drivers: phy: add generic PHY framework
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH V4 6/6] USB: OHCI: make ohci-s3c2410 a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V4 5/6] USB: OHCI: make ohci-at91 a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V4 4/6] USB: OHCI: make ohci-spear a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V4 3/6] USB: OHCI: make ohci-omap3 a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V4 2/6] USB: OHCI: make ohci-omap a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V4 1/6] USB: OHCI: make ohci-exynos a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V4 0/6] USB: OHCI: more bus glues as separate modules
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• Re: [PATCH 01/15] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC v2 4/4] xhci: add xhci_cmd_completion trace event
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• [RFC v2 3/4] xhci: add xhci_address_ctx trace event
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• [RFC v2 2/4] xhci: add trace for debug messages related to endpoint reset
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• [RFC v2 1/4] xhci: add trace for debug messages related to quirks
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• [RFC v3] xhci: add trace for debug messages related to changing contexts
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• [RFC v4] xhci: add traces for debug messages in xhci_address_device()
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• Re: Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH v2] usb: core: don't try to reset_device() a port that got just disconnected
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [RFC 1/4] xhci: add trace for debug messages related to quirks
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• Re: [PATCH] usb: core: don't try to reset_device() a port that got just disconnected
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [PATCH 2/2] chipidea: Use devm_request_irq()
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] chipidea: Remove previous MODULE_ALIAS
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: move vbus regulator operation to core
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [RFC 1/4] xhci: add trace for debug messages related to quirks
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH 1/2] chipidea: Remove previous MODULE_ALIAS
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 2/2] chipidea: Use devm_request_irq()
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [RFC 4/4] xhci: add xhci_cmd_completion trace event
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• [RFC 3/4] xhci: add xhci_address_ctx trace event
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• [RFC 2/4] xhci: add trace for debug messages related to endpoint reset
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• [RFC 1/4] xhci: add trace for debug messages related to quirks
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• [RFC v2] xhci: add trace for debug messages related to changing contexts
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• RE: USB Interrupt Transaction Scheduling
  • From: "Stoddard, Nate (GE Healthcare)" <Nate.Stoddard@xxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Steven Rostedt <srostedt@xxxxxxxxxx>
• Re: [PATCH] usb: xhci: add missing dma-mapping.h includes
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] USB: handle LPM errors during device suspend correctly
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• am335x, multi instance and phy support, v3
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 4/5] usb: musb: dsps: remove the hardcoded phy pieces
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/5] usb: phy: phy-generic: export init functions
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 5/5] usb: musb: dsps: use proper child nodes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/5] usb: phy: Add AM335x PHY driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/5] usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 0/8] pl2303: improve the baud rate support
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• Re: [PATCH 4/8] pl2303: remove 500000 baud from the list of standard baud rates
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 8/8] pl2303: add two comments concerning the supported baud rates with HX chips
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH 7/8] pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH 5/8] pl2303: move the two baud rate encoding methods to separate functions
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH 6/8] pl2303: increase the allow baud rate range for the divisor based encoding method
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH 4/8] pl2303: remove 500000 baud from the list of standard baud rates
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH 3/8] pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH 2/8] pl2303: fix+improve the divsor based baud rate encoding method
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH 1/8] pl2303: restrict the divisor based baud rate encoding method to the "HX" chip type
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH 3/3] USB: handle LPM errors during device suspend correctly
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] USB: refactor code for enabling/disabling remote wakeup
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] USB: simplify the interface of usb_get_status()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: External HDD does not work with 3.11-rc2
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Ejected Nook (usb mass storage) prevents suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: USB Interrupt Transaction Scheduling
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: External HDD does not work with 3.11-rc2
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH] USB: GADGET: fix a bug and a WARN_ON in dummy-hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [GIT PATCH] USB fixes for 3.11-rc4
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: USB Interrupt Transaction Scheduling
  • From: "Stoddard, Nate (GE Healthcare)" <Nate.Stoddard@xxxxxxxxxx>
• Re: [PATCH v3 1/3] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Steven Rostedt <srostedt@xxxxxxxxxx>
• Re: [PATCH] usb: core: don't try to reset_device() a port that got just disconnected
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: core: don't try to reset_device() a port that got just disconnected
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• [PATCH] usb: core: don't try to reset_device() a port that got just disconnected
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: Ejected Nook (usb mass storage) prevents suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: External HDD does not work with 3.11-rc2
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: USB, remove F: drivers/net/usb/ pattern
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: Ejected Nook (usb mass storage) prevents suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: USB Interrupt Transaction Scheduling
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] phy: phy-amxxxx-usb: Add PHY driver for amxxxx platform
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] phy: phy-amxxxx-usb: Add PHY driver for amxxxx platform
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/3] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v2 2/4] phy: phy-amxxxx-usb: Add PHY driver for amxxxx platform
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] net/usb/r8152: replace USB buffer from stack to DMA-able
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: ozwpan: High resolution timers
  • From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: move vbus regulator operation to core
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] staging: ozwpan: High resolution timers
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 2/2] usb: chipidea: add vbus regulator control
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 0/2] usb: chipidea: vbus handling
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 1/2] usb: chipidea: move vbus regulator operation to core
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH] staging: ozwpan: High resolution timers
  • From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
• [PATCH V2 06/35] USB: host: use dev_get_platdata()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 1/4] usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 06/35] USB: host: use dev_get_platdata()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 06/35] USB: host: use dev_get_platdata()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] phy: phy-amxxxx-usb: Add PHY driver for amxxxx platform
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Build regressions/improvements in v3.11-rc3
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 06/35] USB: host: use dev_get_platdata()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 06/35] USB: host: use dev_get_platdata()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH v3 2/3] net/usb/r8152: replace USB buffer from stack to DMA-able
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• [PATCH v3 3/3] net/usb/r8152: adjust relative ocp function
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• [PATCH v3 1/3] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• [PATCH 12/35] USB: c67x00: use dev_get_platdata()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH] pl2303: fix the upper baud rate limit check for type_0/1 chips
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 06/35] USB: host: use dev_get_platdata()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 13/35] usb: renesas: use dev_get_platdata()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 11/35] usb: misc: usb3503: use dev_get_platdata()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 10/35] usb: chipidea: use dev_get_platdata()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 09/35] USB: musb: use dev_get_platdata()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 08/35] USB: phy: use dev_get_platdata()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 07/35] USB: gadget: use dev_get_platdata()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 06/35] USB: host: use dev_get_platdata()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 1/4] usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] usb: phy: phy-omap-control: Add API to power and wakeup
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: External HDD does not work with 3.11-rc2
  • From: Philipp Dreimann <philipp@xxxxxxxxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 01/15] drivers: phy: add generic PHY framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix switched around host, otg in tegra20-usb-phy documentation
  • From: Mikko Perttunen <mperttunen@xxxxxxxxxx>
• [PATCH] usb: tegra: Fix typo in tegra20-usb-phy documentation
  • From: Mikko Perttunen <mperttunen@xxxxxxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] Fix switched around host, otg in tegra20-usb-phy documentation
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [alsa-devel] Buffer size for ALSA USB PCM audio
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH] Fix switched around host, otg in tegra20-usb-phy documentation
  • From: Mikko Perttunen <mperttunen@xxxxxxxxxx>
• Re: [PATCH v2 2/3] Documentation: devicetree: phy-tegra-usb: Add vbus-supply property for host mode PHYs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: f_rndis: fix error return code in rndis_bind()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3] usb: phy-samsung-usb: Simplify PMU register handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: of: fix build breakage caused by recent patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 2/3] Documentation: devicetree: phy-tegra-usb: Add vbus-supply property for host mode PHYs
  • From: Mikko Perttunen <mperttunen@xxxxxxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/4] phy: phy-amxxxx-usb: Add PHY driver for amxxxx platform
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RESEND PATCH v10 1/8] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 1/4] usb: phy: phy-omap-control: Add API to power and wakeup
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH v13 03/14] usb: chipidea: imx: add return value check for devm_regulator_get
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v13 02/14] usb: chipidea: imx: remove vbus regulator operation
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] usb: xhci: Fix Command Ring Stopped Event handling
  • From: Yang Bai <hamo.by@xxxxxxxxx>
• Re: Panasonic DMC-ZS3 mass storage USB regression in 3.10.3
  • From: Marc Meledandri <m.meledandri@xxxxxxxxx>
• [PATCH] usb: gadget: f_rndis: fix error return code in rndis_bind()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [BUG] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD
  • From: Ron Wright <logiconcepts819@xxxxxxxxx>
• Re: [PATCH v13 03/14] usb: chipidea: imx: add return value check for devm_regulator_get
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH v13 02/14] usb: chipidea: imx: remove vbus regulator operation
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• RE: USB Interrupt Transaction Scheduling
  • From: "Stoddard, Nate (GE Healthcare)" <Nate.Stoddard@xxxxxxxxxx>
• RE: USB Interrupt Transaction Scheduling
  • From: "Stoddard, Nate (GE Healthcare)" <Nate.Stoddard@xxxxxxxxxx>
• [PATCH v3] usb: phy-samsung-usb: Simplify PMU register handling
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] Documentation: devicetree: phy-tegra-usb: Add vbus-supply property for host mode PHYs
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] Documentation: devicetree: phy-tegra-usb: Add vbus-supply property for host mode PHYs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/3] Documentation: devicetree: phy-tegra-usb: Add vbus-supply property for host mode PHYs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB Interrupt Transaction Scheduling
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB Interrupt Transaction Scheduling
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• USB Interrupt Transaction Scheduling
  • From: "Stoddard, Nate (GE Healthcare)" <Nate.Stoddard@xxxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: [PATCH 2/3] include: Convert ethernet mac address declarations to use ETH_ALEN
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Buffer size for ALSA USB PCM audio
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] include: Convert ethernet mac address declarations to use ETH_ALEN
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: Buffer size for ALSA USB PCM audio
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v2 1/6] usb: phy: msm: Move mach depndend code to platform data
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [RFC] xhci: add trace for debug messages related to changing contexts
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Bin Liu <binmlist@xxxxxxxxx>
• Re: Buffer size for ALSA USB PCM audio
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] usb: chipidea: fixes for v3.11-rc3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] usb: phy: msm: Move mach depndend code to platform data
  • From: David Brown <davidb@xxxxxxxxxxxxxx>
• Re: [RFC] xhci: add trace for debug messages related to changing contexts
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] pl2303: fix the upper baud rate limit check for type_0/1 chips
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Bin Liu <binmlist@xxxxxxxxx>
• Re: [BUG] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Buffer size for ALSA USB PCM audio
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: External HDD does not work with 3.11-rc2
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: Stuart Foster <smf.linux@xxxxxxxxxxxx>
• [PATCH] pl2303: fix the upper baud rate limit check for type_0/1 chips
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: phy: add am335x pieces to generic phy
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Panasonic DMC-ZS3 mass storage USB regression in 3.10.3
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v10 1/8] drivers: phy: add generic PHY framework
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: Panasonic DMC-ZS3 mass storage USB regression in 3.10.3
  • From: Marc Meledandri <m.meledandri@xxxxxxxxx>
• Re: [RESEND PATCH v10 1/8] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• RE: [RESEND PATCH v10 1/8] drivers: phy: add generic PHY framework
  • From: Kamil Debski <k.debski@xxxxxxxxxxx>
• Re: Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] Documentation: devicetree: phy-tegra-usb: Add vbus-supply property for host mode PHYs
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: Panasonic DMC-ZS3 mass storage USB regression in 3.10.3
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] phy: phy-amxxxx-usb: Add PHY driver for amxxxx platform
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: Buffer size for ALSA USB PCM audio
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] usb: fixes for v3.11-rc3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] usb: phy: phy-omap-control: Add API to power and wakeup
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Ejected Nook (usb mass storage) prevents suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• Re: [PATCH] usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 15/16] dmaengine: add transfered member to dma_async_tx_descriptor
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC] ux500 dma & short transfers on MUSB
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] usb: phy: msm: Migrate to Managed Device Resource allocation
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/6] usb: phy: msm: Move mach depndend code to platform data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC] ux500 dma & short transfers on MUSB
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 2/4] usb: phy: add am335x pieces to generic phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 15/16] dmaengine: add transfered member to dma_async_tx_descriptor
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [GIT PULL] usb: fixes for v3.11-rc3
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3] include: Convert ethernet mac address declarations to use ETH_ALEN
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] chipidea: ci_hdrc_imx: Remove unused variable 'res'
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH 2/2] usb: chipidea: fix the build error with randconfig
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH 1/2] usb: chipidea: cast PORTSC_PTS and DEVLC_PTS macros
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH 0/2] usb: chipidea: fixes for v3.11-rc3
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: Buffer size for ALSA USB PCM audio
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v2 1/3] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH v2] usb: dwc3: core: modify IO memory resource after deferred probe completes
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: Stuart Foster <smf.linux@xxxxxxxxxxxx>
• Chipidea tree is out of date one month
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 1/6] usb: phy: msm: Move mach depndend code to platform data
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 6/6] usb: phy: msm: Fix WARNING: Prefer seq_puts to seq_printf
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 0/6] usb: phy: msm: Fixes and cleanups
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 5/6] usb: phy: msm: Fix WARNING: quoted string split across lines
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 4/6] usb: phy: msm: Remove unnecessarily check for valid regulators.
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 3/6] usb: phy: msm: Migrate to Managed Device Resource allocation
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 2/6] usb: phy: msm: move global regulators variables to driver state
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: Ejected Nook (usb mass storage) prevents suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: Ejected Nook (usb mass storage) prevents suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH 0/3] networking: Use ETH_ALEN where appropriate
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 2/3] include: Convert ethernet mac address declarations to use ETH_ALEN
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Panasonic DMC-ZS3 mass storage USB regression in 3.10.3
  • From: Marc Meledandri <m.meledandri@xxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
• Re: Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [xhci] null pointer dereference on ring_doorbell_for_active_rings
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• [PATCH] usb: gadget: udc-core: fix the typo of udc state attribute
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/8] clk: samsung: pll: Add support for PLL6552 and PLL6553
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH v2 5/8] ARM: s3c64xx: dma: Use clk_prepare_enable/clk_disable_unprepare
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/8] clk: samsung: pll: Add support for PLL6552 and PLL6553
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] net/usb/r815x: replace USB buffer from stack to DMA-able
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] USBNET: max rx/tx qlen change
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
• Re: Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: Stuart Foster <smf.linux@xxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: mos7840: fix pointer casts
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: Stuart Foster <smf.linux@xxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: mos7840: fix pointer casts
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: mos7840: fix pointer casts
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: Ed Tomlinson <edt@xxxxxx>
• Re: [PATCH v2 1/8] clk: mux: Add support for read-only muxes.
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• [PATCH] USB: mos7840: fix pointer casts
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: Unable to access 3TB USB drive via IB-351
  • From: CARING ONE <orosira@xxxxxxxxxxx>
• Re: [PATCH 35/50] media: usb: cx231xx: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Kernel 3.10.3 "reset SuperSpeed USB device number 2 using xhci_hcd"
  • From: Stuart Foster <smf.linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/7] usb: phy: msm: Move regulator usage to managed resource allocation
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Bin Liu <binmlist@xxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• RE: [PATCH] usb: dwc3: core: modify IO memory resource after deferred probe completes
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] usbnet: do not pretend to support SG/TSO
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: add driver for Suunto ANT+ USB device
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• I've now caught up on my pending USB patches
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] USB: mos7840: fix device-type detection
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: add driver for Suunto ANT+ USB device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: add driver for Suunto ANT+ USB device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: host: Faraday fotg210-hcd driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: at91_udc: Check gpio lookup results
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: modify IO memory resource after deferred probe completes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Ejected Nook (usb mass storage) prevents suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: at91_udc: Check gpio lookup results
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 3/7] usb: phy: msm: Move regulator usage to managed resource allocation
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/4] usb: phy: add am335x pieces to generic phy
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• am335x: support for multiple USB instances
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/4] usb: musb: dsps: remove the hardcoded phy pieces
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/4] usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 4/4] usb: musb: dsps: use proper child nodes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Bin Liu <binmlist@xxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] chipidea: core: Move hw_phymode_configure() into probe
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: NULL pointer dereference in xhci_free_dev
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH V3 2/2] USB: OHCI: make ohci-pxa27x a separate driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: dwc3: core: modify IO memory resource after deferred probe completes
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Bin Liu <binmlist@xxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Bin Liu <binmlist@xxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Bin Liu <binmlist@xxxxxxxxx>
• Re: Ejected Nook (usb mass storage) prevents suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [GIT PATCH] USB fixes for 3.11-rc3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Ejected Nook (usb mass storage) prevents suspend
  • From: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: at91_udc: Check gpio lookup results
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• Re: [PATCH] usb: udc: add gadget state kobject uevent
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: add driver for Suunto ANT+ USB device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH V3 2/2] USB: OHCI: make ohci-pxa27x a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V3 1/2] USB: OHCI: make ohci-ep93xx a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V3 0/2] USB: OHCI: more bus glues as separate modules
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• Re: After entering D3 cold: URB ffff88020ea41000 submitted while active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] USB: ohci_usb warn "irq nobody cared" on shutdown
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 35/50] media: usb: cx231xx: spin_lock in complete() cleanup
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] USB: serial: add driver for Suunto ANT+ USB device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Help adding trace events to xHCI
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: Help adding trace events to xHCI
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: Help adding trace events to xHCI
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: Help adding trace events to xHCI
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [RESEND PATCH v10 0/8] PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v10 1/8] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v10 2/8] usb: phy: omap-usb2: use the new generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v10 5/8] ARM: dts: omap: update usb_otg_hs data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v10 3/8] usb: phy: twl4030: use the new generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v10 7/8] usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v10 8/8] usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v10 6/8] usb: musb: omap2430: use the new generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v10 4/8] arm: omap3: twl: add phy consumer data in twl4030_usb_data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• RE: [PATCH v2 01/21] usb/gadget: multi: fix error return code in cdc_do_config()
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v10 2/8] usb: phy: omap-usb2: use the new generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v10 1/8] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v10 4/8] arm: omap3: twl: add phy consumer data in twl4030_usb_data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v10 7/8] usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v10 6/8] usb: musb: omap2430: use the new generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v10 8/8] usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v10 5/8] ARM: dts: omap: update usb_otg_hs data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v10 3/8] usb: phy: twl4030: use the new generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v10 0/8] PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] usb: xhci: add missing dma-mapping.h includes
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH - bugfix for 3.11 2/2] usb/gadget: f_phonet: remove unused preprocessor conditional
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH - bugfix for 3.11 1/2] usb/gadget: multi: fix error return code in cdc_do_config()
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH v2 3/7] usb: phy: msm: Move regulator usage to managed resource allocation
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: Help adding trace events to xHCI
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH] USB: serial: add driver for Suunto ANT+ USB device
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: [PATCH] musb: don't reset endpoint data toggle on blackfin
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] musb: don't reset endpoint data toggle on blackfin
  • From: Scott Jiang <scott.jiang.linux@xxxxxxxxx>
• [PATCH 1/3] USB: mos7840: fix race in register handling
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 2/3] USB: mos7840: fix device-type detection
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 3/3] USB: mos7840: fix race in led handling
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 0/3][RESEND] USB: mos7840: fixes for v3.11
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH] usb: gadget: at91_udc: Check gpio lookup results
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: core: modify IO memory resource after deferred probe completes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 15/16] dmaengine: add transfered member to dma_async_tx_descriptor
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] USBNET: max rx/tx qlen change
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH v13 09/14] usb: chipidea: move otg relate things to otg file
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 14/14] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 05/14] usb: chipidea: otg: Add otg file used to access otgsc
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 03/14] usb: chipidea: imx: add return value check for devm_regulator_get
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 06/14] usb: chipidea: Add role init and destory APIs
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 04/14] usb: chipidea: udc: otg_set_peripheral is useless for some chipidea users
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 00/14] Add tested id switch and vbus connect detect support for Chipidea
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 11/14] usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 02/14] usb: chipidea: imx: remove vbus regulator operation
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 01/14] usb: chipidea: add vbus regulator control
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 13/14] usb: chipidea: udc: .pullup is valid when vbus is on at CI_HDRC_PULLUP_ON_VBUS
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 12/14] usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and CI_HDRC_PULLUP_ON_VBUS
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 10/14] usb: chipidea: add vbus interrupt handler
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 07/14] usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v13 08/14] usb: chipidea: disable all interrupts and clear all interrupts status
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: Help adding trace events to xHCI
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: Help adding trace events to xHCI
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 06/16 => 1/2] usb: musb: dsps: rename ti81xx_driver_data to am33xx_driver_data
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 06/16 => 2/2] usb: musb: dsps: remove EOI access
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/2] usb: musb: omap: remove using PLATFORM_DEVID_AUTO in omap2430.c
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/2] usb: fix controller-PHY binding for OMAP3 platform
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] USB: serial: add driver for Suunto ANT+ USB device
  • From: Daniele Forsi <dforsi@xxxxxxxxx>
• Re: [PATCH 1/6] usb: phy-nop: Use RESET Controller for managing the reset line
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] USB: ohci_usb warn "irq nobody cared" on shutdown
  • From: Caizhiyong <caizhiyong@xxxxxxxxxx>
• a small patch that fixes the ohci warn "irq nobody cared" on shutdown.
  • From: Caizhiyong <caizhiyong@xxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• RE: [PATCH] usb: dwc3: core: modify IO memory resource after deferred probe completes
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH] usb: udc: add gadget state kobject uevent
  • From: Barry Song <21cnbao@xxxxxxxxx>
• [PATCH] USB: serial: add driver for Suunto ANT+ USB device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] chipidea: ci_hdrc_imx: Remove unused variable 'res'
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] chipidea: core: Move hw_phymode_configure() into probe
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• RE: [PATCH] usb: dwc3: core: modify IO memory resource after deferred probe completes
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: Suunto ANT+ stick
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• [PATCH V5] usb: Add Device Tree support to XHCI Platform driver
  • From: "Al Cooper" <alcooperx@xxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Jack Pham <jackp@xxxxxxxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] chipidea: core: Move hw_phymode_configure() into probe
  • From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
• Re: [PATCH v5 3/5] USB: EHCI: improve ehci_endpoint_disable
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH V4] usb: Add Device Tree support to XHCI Platform driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: at91_udc: Check gpio lookup results
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v5 3/5] USB: EHCI: improve ehci_endpoint_disable
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 3/5] USB: EHCI: improve ehci_endpoint_disable
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: modify IO memory resource after deferred probe completes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] staging: dwc2: add microframe scheduler from downstream Pi kernel
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH V4] usb: Add Device Tree support to XHCI Platform driver
  • From: Alan Cooper <alcooperx@xxxxxxxxx>
• Re: [PATCH v5 3/5] USB: EHCI: improve ehci_endpoint_disable
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: dwc3: core: modify IO memory resource after deferred probe completes
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: phy: tegra: Use switch instead of if-else
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• Re: [PATCH v3 8/9] usb: phy: tegra: Use DT helpers for phy_type
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 8/9] usb: phy: tegra: Use DT helpers for phy_type
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: [PATCH v5 3/5] USB: EHCI: improve ehci_endpoint_disable
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 8/9] usb: phy: tegra: Use DT helpers for phy_type
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH v3 0/9] Tegra USB cleanup series
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 2/9] usb: host: tegra: Remove leftover code
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 1/9] usb: phy: tegra: Remove unnecessary 'dev' field
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 5/9] usb: phy: tegra: Register as an USB PHY.
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 4/9] ARM: tegra: Remove USB platform data
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 8/9] usb: phy: tegra: Use DT helpers for phy_type
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• Re: usbtmc / 3.9.x: Reading from Siglent SDS1xxx returned random host memory
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 9/9] usb: phy: tegra: Use DT helpers for dr_mode
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 7/9] usb: phy: tegra: Remove custom PHY locating APIs
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 6/9] usb: host: tegra: Locate a PHY via standard API
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 3/9] usb: tegra: host: Remove references to plat data
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• Re: [PATCH 1/3] USB: mos7840: fix race in register handling
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] Tegra USB cleanup series
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: modify IO memory resource after deferred probe completes
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: [PATCH v2 0/9] Tegra USB cleanup series
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 01/21] usb/gadget: multi: fix error return code in cdc_do_config()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/6] usb: phy-nop: Use RESET Controller for managing the reset line
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/5] usb/gadget: mass_storage: merge usb_f_mass_storage module with u_ms module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/5] usb/gadget: multi: convert to new interface of f_mass_storage
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/5] usb/gadget: multi: convert to new interface of f_rndis
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] usb/gadget: acm_ms: convert to new interface of f_mass_storage
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/5] usb/gadget: multi: convert to new interface of f_ecm
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: core: modify IO memory resource after deferred probe completes
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: at91_udc: Check gpio lookup results
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [Pull Request] xhci: Bug fixes, now with more tags!
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Patch queue status?
  • From: Greg KH <greg@xxxxxxxxx>