This driver is a redo of my earlier attempt. It uses parts of the
generic PHY driver and uses the new control driver for the register
the phy needs to power on/off the phy. It also enables easy access for
the wakeup register which is not yet implemented.
The difference between the omap attempt is:
- no static holding variable
- one global visible function which exports a struct with callbacks to
access the "control" registers.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
---
drivers/usb/phy/Kconfig | 12 ++++
drivers/usb/phy/Makefile | 2 +
drivers/usb/phy/am35x-phy-control.h | 21 ++++++
drivers/usb/phy/phy-am335x-control.c | 135 +++++++++++++++++++++++++++++++++++
drivers/usb/phy/phy-am335x.c | 99 +++++++++++++++++++++++++
5 files changed, 269 insertions(+)
create mode 100644 drivers/usb/phy/am35x-phy-control.h
create mode 100644 drivers/usb/phy/phy-am335x-control.c
create mode 100644 drivers/usb/phy/phy-am335x.c
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index f5ea339..f41c3e1 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -86,6 +86,18 @@ config OMAP_USB3
This driver interacts with the "OMAP Control USB Driver" to power
on/off the PHY.
+config AM335X_CONTROL_USB
+ tristate
+
+config AM335X_PHY_USB
+ tristate "AM335x USB PHY Driver"
+ select USB_PHY
+ select AM335X_CONTROL_USB
+ select NOP_USB_XCEIV
+ help
+ This driver provides PHY support for that phy which part for the
+ AM335x SoC.
+
config SAMSUNG_USBPHY
tristate
help
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 24c5816..dae321d 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -16,6 +16,8 @@ obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o
obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o
obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o
obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o
+obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o
+obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o
obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o
diff --git a/drivers/usb/phy/am35x-phy-control.h b/drivers/usb/phy/am35x-phy-control.h
new file mode 100644
index 0000000..b96594d
--- /dev/null
+++ b/drivers/usb/phy/am35x-phy-control.h
@@ -0,0 +1,21 @@
+#ifndef _AM335x_PHY_CONTROL_H_
+#define _AM335x_PHY_CONTROL_H_
+
+struct phy_control {
+ void (*phy_power)(struct phy_control *phy_ctrl, u32 id, bool on);
+ void (*phy_wkup)(struct phy_control *phy_ctrl, u32 id, bool on);
+};
+
+static inline void phy_ctrl_power(struct phy_control *phy_ctrl, u32 id, bool on)
+{
+ phy_ctrl->phy_power(phy_ctrl, id, on);
+}
+
+static inline void phy_ctrl_wkup(struct phy_control *phy_ctrl, u32 id, bool on)
+{
+ phy_ctrl->phy_wkup(phy_ctrl, id, on);
+}
+
+struct phy_control *am335x_get_phy_control(struct device *dev);
+
+#endif
diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c
new file mode 100644
index 0000000..64e5ab4
--- /dev/null
+++ b/drivers/usb/phy/phy-am335x-control.c
@@ -0,0 +1,135 @@
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/io.h>
+
+struct phy_control {
+ void (*phy_power)(struct phy_control *phy_ctrl, u32 id, bool on);
+ void (*phy_wkup)(struct phy_control *phy_ctrl, u32 id, bool on);
+};
+
+struct am335x_control_usb {
+ struct device *dev;
+ void __iomem *reset_reg;
+ spinlock_t lock;
+ struct phy_control phy_ctrl;
+};
+
+#define AM335X_USB0_CTRL 0x620
+#define AM335X_USB1_CTRL 0x628
+#define AM335x_USB_WKUP 0x648
+
+#define USBPHY_CM_PWRDN (1 << 0)
+#define USBPHY_OTG_PWRDN (1 << 1)
+#define USBPHY_OTGVDET_EN (1 << 19)
+#define USBPHY_OTGSESSEND_EN (1 << 20)
+
+static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id, bool on)
+{
+ struct am335x_control_usb *usb_ctrl;
+ u32 val;
+ u32 reg;
+
+ usb_ctrl = container_of(phy_ctrl, struct am335x_control_usb, phy_ctrl);
+
+ switch (id) {
+ case 0:
+ reg = AM335X_USB0_CTRL;
+ break;
+ case 1:
+ reg = AM335X_USB1_CTRL;
+ break;
+ default:
+ __WARN();
+ return;
+ }
+
+ val = readl(usb_ctrl->reset_reg + reg);
+ if (on) {
+ val &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN);
+ val |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN;
+ } else {
+ val |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
+ }
+
+ writel(val, usb_ctrl->reset_reg + reg);
+}
+
+static const struct phy_control ctrl_am335x = {
+ .phy_power = am335x_phy_power,
+};
+
+static const struct of_device_id omap_control_usb_id_table[] = {
+ { .compatible = "ti,am335x-ctrl-module", .data = &ctrl_am335x },
+ {}
+};
+MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
+
+static struct platform_driver am335x_control_driver;
+static int match(struct device *dev, void *data)
+{
+ struct device_node *node = (struct device_node *)data;
+ return dev->of_node == node &&
+ dev->driver == &am335x_control_driver.driver;
+}
+
+struct phy_control *am335x_get_phy_control(struct device *dev)
+{
+ struct device_node *node;
+ struct am335x_control_usb *ctrl_usb;
+
+ node = of_parse_phandle(dev->of_node, "ti,ctrl_mod", 0);
+ if (!node)
+ return NULL;
+
+ dev = bus_find_device(&platform_bus_type, NULL, node, match);
+ ctrl_usb = dev_get_drvdata(dev);
+ if (!ctrl_usb)
+ return NULL;
+ return &ctrl_usb->phy_ctrl;
+}
+EXPORT_SYMBOL_GPL(am335x_get_phy_control);
+
+static int am335x_control_usb_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct am335x_control_usb *ctrl_usb;
+ const struct of_device_id *of_id;
+ const struct phy_control *phy_ctrl;
+
+ of_id = of_match_node(omap_control_usb_id_table, pdev->dev.of_node);
+ if (!of_id)
+ return -EINVAL;
+
+ phy_ctrl = of_id->data;
+
+ ctrl_usb = devm_kzalloc(&pdev->dev, sizeof(*ctrl_usb), GFP_KERNEL);
+ if (!ctrl_usb) {
+ dev_err(&pdev->dev, "unable to alloc memory for control usb\n");
+ return -ENOMEM;
+ }
+
+ ctrl_usb->dev = &pdev->dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "control_dev");
+ ctrl_usb->reset_reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ctrl_usb->reset_reg))
+ return PTR_ERR(ctrl_usb->reset_reg);
+ spin_lock_init(&ctrl_usb->lock);
+ ctrl_usb->phy_ctrl = *phy_ctrl;
+
+ dev_set_drvdata(ctrl_usb->dev, ctrl_usb);
+ return 0;
+}
+
+static struct platform_driver am335x_control_driver = {
+ .probe = am335x_control_usb_probe,
+ .driver = {
+ .name = "am335x-control-usb",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(omap_control_usb_id_table),
+ },
+};
+
+module_platform_driver(am335x_control_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
new file mode 100644
index 0000000..c4d614d
--- /dev/null
+++ b/drivers/usb/phy/phy-am335x.c
@@ -0,0 +1,99 @@
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "am35x-phy-control.h"
+#include "phy-generic.h"
+
+struct am335x_phy {
+ struct usb_phy_gen_xceiv usb_phy_gen;
+ struct phy_control *phy_ctrl;
+ int id;
+};
+
+static int am335x_init(struct usb_phy *phy)
+{
+ struct am335x_phy *am_phy = dev_get_drvdata(phy->dev);
+
+ phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, true);
+ return 0;
+}
+
+static void am335x_shutdown(struct usb_phy *phy)
+{
+ struct am335x_phy *am_phy = dev_get_drvdata(phy->dev);
+
+ phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false);
+}
+
+static int am335x_phy_probe(struct platform_device *pdev)
+{
+ struct am335x_phy *am_phy;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ am_phy = devm_kzalloc(dev, sizeof(*am_phy), GFP_KERNEL);
+ if (!am_phy)
+ return -ENOMEM;
+
+ am_phy->phy_ctrl = am335x_get_phy_control(dev);
+ if (!am_phy->phy_ctrl)
+ return -EPROBE_DEFER;
+ am_phy->id = of_alias_get_id(pdev->dev.of_node, "phy");
+ if (am_phy->id < 0) {
+ dev_err(&pdev->dev, "Missing PHY id: %d\n", am_phy->id);
+ return am_phy->id;
+ }
+
+ ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen,
+ USB_PHY_TYPE_USB2, 0, false, false);
+ if (ret)
+ return ret;
+
+ ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
+ if (ret)
+ goto err_add;
+ am_phy->usb_phy_gen.phy.init = am335x_init;
+ am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
+
+ platform_set_drvdata(pdev, am_phy);
+ return 0;
+
+err_add:
+ usb_phy_gen_cleanup_phy(&am_phy->usb_phy_gen);
+ return ret;
+}
+
+static int am335x_phy_remove(struct platform_device *pdev)
+{
+ struct am335x_phy *am_phy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&am_phy->usb_phy_gen.phy);
+ return 0;
+}
+
+static const struct of_device_id am335x_phy_ids[] = {
+ { .compatible = "ti,am335x-usb-phy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, am335x_phy_ids);
+
+static struct platform_driver am335x_phy_driver = {
+ .probe = am335x_phy_probe,
+ .remove = am335x_phy_remove,
+ .driver = {
+ .name = "am335x-phy-driver",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(am335x_phy_ids),
+ },
+};
+
+module_platform_driver(am335x_phy_driver);
+MODULE_LICENSE("GPL v2");
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
